Mechanical Engineering Commons^™

Performance Evaluation Of Composite Sandwich Structures With Additively Manufactured Aluminum Honeycomb Cores With Increased Bonding Surface Area, M. Rangapuram, S. K. Dasari, Joseph William Newkirk, K. Chandrashekhara, H. Misak, P. R. Toivonen, D. Klenosky, T. Unruh, J. Sam

Materials Science and Engineering Faculty Research & Creative Works

Modern aerostructures, including wings and fuselages, increasingly feature sandwich structures due to their high-energy absorption, low weight, and high flexural stiffness. The face sheet of these sandwich structures are typically thin composite laminates with interior honeycombs made of Nomex or aluminum. Standard cores are structurally efficient, but their design cannot be varied throughout the structure. With additive manufacturing (AM) technology, these core geometries can be altered to meet the design requirements that are not met in standard honeycomb cores. This study used a modified aluminum honeycomb core, with increased surface area on the top and bottom, as the core material …

Mixed-Input Learning For Multi-Point Landing Guidance With Hazard Avoidance Part I: Offline Mission Planning Based On Multi-Stage Optimization, Chaoying Pei, Sixiong You, Ran Dai, Jeremy R. Rea

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper proposes a multi-stage optimization framework based on iterative second-order cone programming (SOCP) to solve the three-dimensional (3D) multi-point landing guidance (MLG) problem with hazard avoidance. The approach is used to generate the offline optimal trajectories for database construction in Part II of this paper, it aims to select a safe landing point while finding an optimal path to the selected landing point with minimum fuel consumption. First, by introducing binary variables associated with quadratic constraints, the MLG problem with hazard avoidance is equivalently reformulated as a quadratically constrained quadratic programming (QCQP) problem. Next, to solve the reformulated QCQP …

Experimental Approach For Development Of A Powder Spreading Metric In Additive Manufacturing, M. Hossein Sehhat, Austin T. Sutton, Zane Yates, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The Powder Spreading is a Vital Step of Powder-Based Additive Manufacturing (AM) Processes. the Quality of Spread Powder Can Considerably Influence the Properties of Fabricated Parts. Poorly Packed Powder Beds with High Surface Roughness Result in Printed Part Layers with Large Porosity and Low Dimensional Accuracy, Leading to Poor Mechanical Properties. Therefore, the Powder Spread ability and its Dependence on Process Parameters and Powder Characteristics Should Be Quantified to Improve the Efficiency of Powder-Based AM Methods. This Study Proposes a Novel Dimensionless Powder Spread Ability Metric that Can Be Commonly Used in Different Powder-Based AM Processes. the Quality of Spread …

An Insight Into The Effect Of Sharp And Round Edges On The Flow Field-A Cfd Simulation, Abid Hussain, Gao Puzhen, M. Mustafa Azeem, Muhammad Zubair, Muhammad Aamir, Muhammad Irfan Khaleed

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents a numerical investigation of pressure drop and distribution in a channel around a sharp edge and a disc that is connected to the base of a circular rod. We have employed computational fluid dynamics (CFD)-Fluent for the validation of our models. It was found that the edge sharpness of the disc influences the pressure drop., i.e. sharp edge has higher turbulence and pressure drop. We also observed that pressure drops in the case of the circular disc are less than that of the sharp edge. However, pressure drop has essentially the same values for both shapes after …

Investigation Of Endothelial Mechanics On Primary Cell Functions: Endothelium Permeability And Wound Healing, Sean Beverung

Electronic Theses and Dissertations, 2020-2023

The endothelium composes the inner lining of blood vessels, the heart, and lymphatic vessels. Within the cardiovascular system, it is an extremely important structure, aiding in the regulation of blood pressure with the vascular tone, recruiting immune response, regulating the transfer of material in and out of the bloodstream, and the creation of new blood vessels through angiogenesis. The endothelium is composed entirely of endothelial cells. These cells lay in a flat squamous formation and are in direct contact with blood and aid in the regulation and transfer of material in and out of the bloodstream via active and passive …

Investigation Of Manufacturing Techniques For Magnetorheological Elastomers To Expand Feasibility In A Diverse Array Of Applications, Austin S. Robbins

College of Graduate Studies: Theses & Dissertations

Magnetorheological elastomers, or MREs, are smart composite materials with controllable physical and mechanical properties when introduced to an external stimulus of a magnetic field. The controllability of these properties is highly tunable by the selection of the elastomeric matrix, concentration of magnetically permeable particles, introduction of additives, and the alignment of the constituents during the curing process. The fabrication of MREs typically calls for a mold that is filled with an MRE mixture to create the final desired geometry after curing. These molds are frequently placed under a magnetic field which orients the micron sized magnetic particles along the magnetic …

Synthesis And Processing Of Pcl And Irdye Nanoparticles For Application In Drug Release Mechanism, Michael Adeniyi

College of Graduate Studies: Theses & Dissertations

The objective of this study is to produce core-shell nanoparticles utilizing PCL and IRDye and investigate the nanoparticle release mechanism. Biodegradable polymer, Polycaprolactone (PCL), was electrosprayed separately with two types of IRDye, NHS and Dextran Texas red. The solution of PCL was formed by mixing PCL in a solution of 9.47ml Acetic Acid, 9.47ml Formic Acid, and 1.05ml Trifluoroethanol, following a ratio of 9:9:1. The two solutions of IRDye were prepared by mixing 2mg of the IRdye with 20ml of DMF at a rate of 0.1mg/ml.

The NHS IRDye was electrosprayed coaxially with PCL and the Dextran Texas red dye …

Peridynamic Simulation Of Elastic Wave Propagation By Applying The Boundary Conditions With The Surface Node Method, Francesco Scabbia, Mirco Zaccariotto, Ugo Galvanetto, Florin Bobaru

Department of Mechanical and Materials Engineering: Faculty Publications

Peridynamics is a novel nonlocal theory able to deal with discontinuities, such as crack initiation and propagation. Near the boundaries, due to the incomplete nonlocal region, the peridynamic surface effect is present, and its reduction relies on using a very small horizon, which ends up being expensive computationally. Furthermore, the imposition of nonlocal boundary conditions in a local way is often required. The surface node method has been proposed to solve both the aforementioned issues, providing enhanced accuracy near the boundaries of the body. This method has been verified in the cases of quasi-static elastic problems and diffusion problems evolving …

A New Course In Defense Manufacturing – An Introduction To Shipbuilding, Alley C. Butler

Manufacturing & Industrial Engineering Faculty Publications

This paper discusses the development and deployment of a new course in DMEI (Defense Manufacturing Engineering Innovation) titled, “Introduction to Shipbuilding.” This course has been taught using Zoom since 2021 at both the University of Texas Rio Grande Valley, a Hispanic Serving Institution, and Virginia State University, a Historically Black University. After a brief literature review, an outline of the course is presented with topics including the maritime market for shipbuilding, economics of shipbuilding, the classification agencies, metallurgy and welding processes, ship structure and assembly, shipyard layout, accuracy control, and shipbuilding planning and scheduling. Difficulties in obtaining an appropriate textbook …

Topologically Optimized Electrodes For Electroosmotic Actuation, Jianwen Sun, Jianyu Zhang, Ce Guan, Teng Zhou, Shizhi Qian, Yongbo Deng

Mechanical & Aerospace Engineering Faculty Publications

Electroosmosis is one of the most used actuation mechanisms for the microfluidics in the current active lab-on-chip devices. It is generated on the induced charged microchannel walls in contact with an electrolyte solution. Electrode distribution plays the key role on providing the external electric field for electroosmosis, and determines the performance of electroosmotic microfluidics. Therefore, this paper proposes a topology optimization approach for the electrodes of electroosmotic microfluidics, where the electrode layout on the microchannel wall can be determined to achieve designer desired microfluidic performance. This topology optimization is carried out by implementing the interpolation of electric insulation and electric …

Effect Of Platelet Length And Stochastic Morphology On Flexural Behavior Of Prepreg Platelet Molded Composites, Siavash Sattar, Benjamin Beltran Laredo, Sergii G. Kravchenko, Oleksandr G. Kravchenko

Mechanical & Aerospace Engineering Faculty Publications

Prepreg platelet molding compound (PPMC) can be used to create structural grade material with a heterogeneous mesoscale morphology. The present work considered various platelet lengths of the prepreg system IM7/8552 to study the effect of platelet length on the flexural behavior of PPMC composite. A progressive failure finite-element analysis was used to understand competing failure modes in PPMC with the different platelet length. The interlaminar and in-plane damage mechanisms were employed to describe complex failure modes within the mesostructure of PPMCs. Experimental results of the flexural tests of the PPMC with different platelet length sizes were used to validate the …

การศึกษาการตรวจหาเชื้อวัณโรคจากภาพย้อมสีทนกรดโดยใช้การเรียนรู้เชิงลึกด้วยเทคนิคการจำแนกและการตรวจจับวัตถุ, ธีริศรา มิคาระเศรษฐ์

Chulalongkorn University Theses and Dissertations (Chula ETD)

การศึกษานี้เป็นการวิเคราะห์ Deep Learning สำหรับตรวจหาเชื้อวัณโรคด้วยวิธีการ Modified Classification และ Object Detection โดยใช้ Pre-Trained Model คือ Enhanced ResNet50 และ AlexNet ในการวิเคราะห์ ซึ่งวิธี Modified Classification มีการนำ Image Processing มาประยุกต์ใช้กับการทดลอง เมื่อ Training ข้อมูล พบว่า ResNet50 เป็น Model ที่มีประสิทธิภาพสูงสุดได้ค่า Accuracy เท่ากับ 92.71% และ Precision เท่ากับ 92.7% เมื่อจัดกลุ่มใหม่สำหรับการวิเคราะห์ แบบ Suspected Positive Low Confidence และ Suspected Positive High Confidence ผลการทดลองพบว่า ResNet50 ยังคงมีประสิทธิภาพที่ดีที่สุด มีค่า Accuracy เท่ากับ 98.06% ค่า Precision เท่ากับ 98.59% ส่วน Suspected Positive High Confidence มีค่า Accuracy เท่ากับ 94.38% และค่า Precision เท่ากับ 91.41% และในการวิเคราะห์ Deep Learning วิธี Object Detection ได้ค่า Precision เท่ากับ 82.81% และ Mean AP เท่ากับ 36.79% จากการเปรียบเทียบการวิเคราะห์ทั้ง 2 Models พบว่า วิธีวิเคาระห์แบบ Modified Classification ได้ผลลัพทธ์ดีกว่า จึงนำไปตรวจร่วมกับวิธีการตรวจของแพทย์ (Doctor …

Utilisation Des Ponts Élévateurs De Véhicules Hors Terre À Deux Colonnes : Identification De Déterminants Techniques De Stabilité Et Des Déterminants Du Travail Des Techniciens Automobiles, Damien Burlet-Vienney, Sylvie Beaugrand, Bertrand Galy, Maud Gonella, François Gauthier, Élise Ledoux, Isabelle Berger, Isvieysys Armas Marrero, Kariane Cusson Bertrand

Rapports de recherche scientifique

Cette recherche porte spécifiquement sur l’utilisation des ponts élévateurs de véhicules (PEV) hors terre à deux colonnes (HT2C). Les PEV HT2C sont utilisés par les techniciens automobiles lors de l’entretien et de la réparation des véhicules et les amènent à travailler sous ou à proximité d’une charge surélevée de plusieurs tonnes. La mort d’un jeune technicien en 2014 est à l’origine d’une concertation du secteur de la réparation automobile et de ces travaux de recherche. La chute d’un véhicule d’un PEV HT2C est le risque ciblé par cette étude.

De nombreux facteurs sont susceptibles de contribuer à la chute d’un …

Thermal Performance And Fluid Flow Studies Of Twisted Tape Inserts Using Scaled Surrogate Fluids For Molten Salt Energy Applications, Arturo Cabral

Theses and Dissertations

Global energy consumption is expected to increase with population growth and innovative clean sources of energy are sought out that can help meet the needs of a continuously power-hungry world. Some of these innovative sources of energy use molten salts as their operating and cooling fluid, such as fission reactors, fusion reactors, and solar power with energy storage. Molten salts are considered due to their efficient heat transfer properties, thermal energy storage capabilities, and high operating temperatures. To expedite their deployment, a further understanding of the heat transfer systems is required to accurately design and develop the heat transfer components …

Advanced Modeling And Innovative Transcranial Magnetic Stimulation Coil Designs For The Treatment Of Neurological Disorders, Mohannad Tashli

Theses and Dissertations

Transcranial magnetic stimulation (TMS) is a safe, effective and non-invasive treatment for several mental and psychiatric disorders. TMS is an FDA approved treatment and is commonly applied to patients who do not respond to medications for the treatment of clinical depression, smoking cessation, obsessive-compulsive disorder and migraine. Recently, there has been an increase in the development of electromagnetic neuromodulation techniques targeted at enhancing the effectiveness of TMS devices for the treatment of mental diseases. In TMS stimulation, focality is an important factor which determines the specificity of the pulses induced in different brain tissues. The electromagnetic pulses must be confined …

Full Body Harness Design Modifications And Evaluation: A Senior Design Project, Martin Mead, Jordan Von Seggern

The Journal of Undergraduate Research

Full-body harness (FBH) is critical for the safe operation of industrial and recreational activities, from installing and maintaining infrastructure such as wind turbines to ziplining and mountaintop adventures. However, harness design remains in the proprietary information of companies with limited technical information available for improvements or readjustments to specialized applications. As the outcome of the Capstone project, the paper focuses on multiple technical aspects and the engineering processes for designing FBH for ziplining recreational users, from selecting and testing materials for operation in cold weather to improvements in design and manufacturing for user comfort. The project is guided by technical …

Quantifying The Effects Of Hvac Operation To Mitigate Aerosol Concentration In A Classroom Using Cfd, Scott Deprez

Electronic Theses and Dissertations

Heating, ventilation, and air conditioning (HVAC) is a complex mechanical system for the transition of air between outdoor and indoor areas. These systems are directly responsible for temperature, humidity, and air flow into any given space, thereby providing a level of comfort to those who live indoors. These systems account for 52 percent of U.S. energy consumption. When designing HVAC systems, indoor air quality (IAQ) is the main focus for achieving safe and clean air, such as in the case of airborne diseases. HVAC systems are responsible for the flow of air in indoor spaces and thereby expand the transmissible …

Nonprehensile Manipulation Of A Stick Using Impulsive Forces, Aakash Khandelwal, Nilay Kant, Ranjan Mukherjee

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The problem of nonprehensile manipulation of a stick in three-dimensional space using intermittent impulsive forces is considered. The objective is to juggle the stick between a sequence of configurations that are rotationally symmetric about the vertical axis. The dynamics of the stick is described by five generalized coordinates and three control inputs. Between two consecutive configurations where impulsive inputs are applied, the dynamics is conveniently represented by a Poincaré map in the reference frame of the juggler. Stabilization of the orbit associated with a desired juggling motion is accomplished by stabilizing a fixed point on the Poincaré map. The Impulse …

Modeling Of Transport In Anatomic Respiratory Airways: Applications In Targeted Drug Delivery And Airborne Pathogenic Transmissions, Mohammad Mehedi Hasan Akash

Electronic Theses and Dissertations

This thesis aims to explore the potential of improving the efficacy of drugs for treatment of viral infections by targeting the nasopharynx, which is commonly the first site of infection for many viral pathogens. Currently, intranasal sprays are used, but the standard protocol (“Current Use” or CU) results in suboptimal drug deposition at the nasopharynx. To address this issue, an “Improved Use” or, IU protocol has been proposed, which involves pointing the spray bottle at a shallower angle and aiming slightly towards the cheeks. The IU delivery is also robust to perturbations in spray direction, which highlights the practical utility …

Nucleotide Detection Mechanism And Comparison Based On Low-Dimensional Materials: A Review, M. Mustafa Azeem, Muhammad Shafa, Muhammad Aamir, Muhammad Zubair, Basma Souayeh, Mir Waqas Alam

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The recent pandemic has led to the fabrication of new nucleic acid sensors that can detect infinitesimal limits immediately and effectively. Therefore, various techniques have been demonstrated using low-dimensional materials that exhibit ultrahigh detection and accuracy. Numerous detection approaches have been reported, and new methods for impulse sensing are being explored. All ongoing research converges at one unique point, that is, an impetus: the enhanced limit of detection of sensors. There are several reviews on the detection of viruses and other proteins related to disease control point of care; however, to the best of our knowledge, none summarizes the various …

Initial Procedure For Small-Scale Extraction Of Subsurface Martian Ice, Evan Steers

Electronic Theses and Dissertations

For decades, NASA has been surveying the surface of Mars with plans for human exploration. Due to recent advancements, there is strong evidence to believe that frozen aquifers beneath the Martian surface hold great amounts of usable H2O. Since the discovery of water on Mars, NASA has expressed key interest in harvesting this valuable resource. The presence of usable H2O on Mars could reduce the launching mass of future missions by giving astronauts the capability to harvest water once they have landed on Mars. This research focuses on the optimization of a current design to extract Martian water and the …

Efficacy, Durability And Design Of A Bucket Wheel Excavator For Icy Lunar Regolith, Austin Lohsandt

Electronic Theses and Dissertations

This research project focused on the design and testing of a prototype bucket wheel excavator developed for NASA's Break the Ice Lunar Challenge, which sought innovative ideas for lunar excavation. Several attempts have been made by other universities and private industries to create systems that can successfully excavate simulated frozen regolith, however, few have been successful. The chosen excavation technology employed a bucket wheel concept inspired by large open-pit mining machines, modified to incorporate grinding nubs for pulverizing lunar simulant material. The goals included proving the viability of a bucket wheel excavator for lunar excavation, exploring grinding nubs, conducting durability …

Mechanical Properties Evaluation Of 3d Printed Petg And Pctg Polymers, Kalpesh Krishnarao Bhosale

Electronic Theses and Dissertations

3D printing is also known as additive manufacturing (AM) which has become a popular manufacturing trend over the years. Due to its unique advantages of fast production rate, ability to create complex geometrical features, toolless manufacturing and many more attracts various industries from Aerospace to general cosmetics. Along with the advancement in material science, various polymers including Polylactic Acid (PLA), Polyethylene terephthalate glycol (PETG) and many more are available for 3D printing. Due to the wide range of applications in PLA, it is necessary to improve its toughness to make it more suitable by adding Poly Cyclohexylenedimethylene Terephthalate glycol (PCTG) …

Pore-Resolving Simulations Of Biomass Char Particle Combustion, Dongyu Liang, Simcha L. Singer

Mechanical Engineering Faculty Research and Publications

Biomass char morphology affects combustion behavior at the particle scale for zone II conditions, in which both heterogeneous reaction and intra-particle diffusion govern the overall rate. Furthermore, particle-scale processes affect reactor-scale outputs, and reactor-scale simulations are sensitive to particle-scale models. However, most char particle combustion models employ coarse-grained, effective-continuum approaches, which treat all porosity at the subgrid-scale. Effective-continuum approaches are not valid or accurate in the presence of large, irregular pores which can approach the size of the particle. A 3-D, pore-resolving CFD simulation approach using real biomass char particle geometries obtained from X-ray micro-computed tomography (micro-CT) is therefore used …

Modeling Thermal Radiation In Combustion Environments: Progress And Challenges, Sandip Mazumder, Somesh P. Roy

Mechanical Engineering Faculty Research and Publications

Modeling thermal radiation in combustion environments can be extremely challenging for two main reasons. First, the radiative transfer equation (RTE), which is the cornerstone of modeling radiation in such environments, is a five-dimensional integro-differential equation. Second, the absorption and scattering coefficients of molecular gases and particulates prevalent in combustion environments oscillate strongly with the wavenumber (or wavelength), i.e., the medium is strongly nongray, requiring the solution of the RTE for a large number of wavenumbers. This article reviews the progress that has been made in this area to date with an emphasis on the work performed over the past three …

Nebraska Summary #1297: Fendt 724 Vario Gen 7.1, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary #1296: Fendt 722 Vario Gen 7.1, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Perspective On Predictive Modeling: Current Status, New High-Order Methodology And Outlook For Energy Systems, Dan Gabriel Cacuci

Faculty Publications

This work presents a perspective on deterministic predictive modeling methodologies, which aim at extracting best-estimate values for model responses and parameters along with reduced predicted uncertainties for these best-estimate values. The two oldest such methodologies are the data-adjustment method, which stems from the nuclear energy field, and the data-assimilation method, which is implemented in the geophysical sciences. Both of these methodologies attempt to minimize, in the least-square sense, a user-defined functional that represents the discrepancies between computed and measured model responses. These two methodologies were briefly reviewed and shown to be inconsistent even to first-order in the sensitivities of the …

Nebraska Tractor Test: 2265 John Deere 9rx 640 18 Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Tractor Test: 2262 John Deere 9r 540, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …