Mechanical Engineering Commons^™

Risk Management Of Carbon Steel Piping In Sweet Environment Multiphase Fluid Production, Triadhi Panthun Tiggor, Rini Riastuti

Journal of Materials Exploration and Findings

As well reserved depleted and limited, it is necessary to lower the capital expenditure so that lifting SZ reservoir be more profitable. This article first contextualizes the effort done to increase the hydrocarbon lifting in a mature field. Despite the importance to sustain the production, and massive studies done to quantify the associate risk, no structured methodology proposed to manage the risk in respect to optimize the production expenditure by selection of carbon steel as alternative for corrosion resistance material piping. Hence, this article proposed a framework to support the decision-making process to operate in safely manner. Real case study …

Dynamic Rbi With Central Difference Method Approach In Calculation Of Uniform Corrosion Rate: A Casestudy On Gas Pipelines, M.Riefqi Dwi Alviansyah, Fernanda Hartoyo, Zahra Nadia Nurullia, Ari Kurniawan

Journal of Materials Exploration and Findings

The oil and gas industry generally uses a piping system to drain fluids. Even though the pipes used have been well designed, the use of pipes as a means of fluid transportation still provides the possibility of failure that can occur at any time, one of which is due to uniform corrosion. The use of standard Risk Based Inspection (RBI) according to the API RBI 581 document has been widely used to anticipate potential failures to pipe components. The use of standard RBI can reduce the risk of failure significantly. Because the standard RBI considers the component risk value to …

The Comparison Of Pipe Thickness Selection Method Using Full Flange Rating And Non-Full Flange Rating Of Cryogenic Services In An Lng Plant Construction, Ari Agustar, Isdaryanto Iskandar, Wahyuaji Narottama Putra

Journal of Materials Exploration and Findings

Significant growth of gas demand as a source of power generation for domestic use and industries, mainly in the developed countries, has forced the effort to secure the gas supplies located thousands of miles away across the sea as an economical way of gas transportation instead of transporting by pipeline. LNG technology was created as the solution. Natural gas is refrigerated below its boiling point (-160^oC to -162^oC), known as cryogenic temperature or cryogenic service. Material of Construction (MOC) selection report showed that 304/304L and 316/316L Stainless Steel pipe could withstand and be suitable for this …

Synthesis And Characterization Of Hybrid Catalysts For Fischer-Tropsch Jet Fuel Production, Jack M. Steinagel

Honors College Theses

Climate change is a major issue that our world is facing today. Finding renewable options for current infrastructure is paramount to solving this issue. Fischer-Tropsch synthesis of syngas from gasified biomass can produce renewable fuels that can be used in current conventional combustion engines. In order to make this process more industrially viable, a higher selectivity towards the desired range of liquid hydrocarbon products must be achieved. A novel way to do this is to introduce a catalyst to the Fischer-Tropsch reaction. The catalyst’s physical and chemical properties can promote chain growth of specific hydrocarbons. For the purpose of this …

Retention Forces For Drops On Microstructured Superhydrophobic Surfaces, Shaur Humayun, R. Daniel Maynes, Julie Crockett, Brian D. Iverson

Faculty Publications

Accurate models of retention forces between drops and superhydrophobic (SH) surfaces are required to predict drop dynamics on the surface. This retention force is, in turn, useful in modeling heat transfer rates for dropwise condensation on a SH surface. Drop contact angle distribution and base area on SH surfaces are essential factors for predicting retention forces. The present work measures the contact angle distribution and base area shapes of various drop sizes over a wide range of solid fraction for inclined microstructured SH surfaces at the point of drop departure. Base area shape was found to be well approximated using …

On Blockchain Performance Enhancement: A Systematic Map Of Strategies Used, Anthony Kigombola

Tanzania Journal of Engineering and Technology (TJET)

Blockchain technology is one among the recent innovations in the computing industry. Blockchains have gathered a widespread interest in the industry mainly due to their security promise. Despite the anticipated benefits of Blockchains, there are several limitations which make the technology less suitable in large scale applications such as banking, one being low throughput. Several initiatives to improve the throughput of Blockchains are being tried out both in the academia and the business worlds but no systematic classification of the initiatives and the strategies used has been done. This study explores Blockchain performance improvement initiatives and classify the initiatives by …

Design, Development And Evaluation Of The Ruggedized Edge Computing Node (Recon), Sahil Girin Patel

Theses and Dissertations

The increased quality and quantity of sensors provide an ever-increasing capability to collect large quantities of high-quality data in the field. Research devoted to translating that data is progressing rapidly; however, translating field data into usable information can require high performance computing capabilities. While high performance computing (HPC) resources are available in centralized facilities, bandwidth, latency, security and other limitations inherent to edge location in field sensor applications may prevent HPC resources from being used in a timely fashion necessary for potential United States Army Corps of Engineers (USACE) field applications. To address these limitations, the design requirements for RECON …

Molecular Dynamics Of High Temperature Hydrogen Attack, Mike Travis Bodden Connor

Theses and Dissertations

High temperature hydrogen attack (HTHA) is a damage mechanism that only affects carbon steel and low alloy material. Most of the data regarding HTHA are experimental-driven. Even though this approach has been successful, there are still much more things that the oil and gas industry does not understand about HTHA. The regions that were considered safe (below the Nelson curves) have experienced catastrophic failure. Our research consists of performing Molecular Dynamics (MD) and the Nudge Elastic Band (NEB) calculation of HTHA to better understand the atomistic behavior of this damage mechanism.

Numerical Study Of Advanced Solar Receiver Tubes Based On A Coupled Thermo-Mechanical Analysis For Concentrated Solar Power Tower Plant, Shawn Michael Hatcher

Theses and Dissertations

The search for more sustainable energy to match the growing energy demand begins with finding more dispatchable resources such as solar energy. As one of the promising solar technologies, concentrated solar power (CSP) has a full capacity to store thermal energy for extended operation. Nevertheless, some key components in CSP systems usually face extreme environment, such as uneven solar flux, cyclic thermal expansion, structural degradation on the solar absorber tubes in a Concentrated Solar Power Tower (CSPT) Plant. In this study, we applied Multiphysics simulation to explore the benefits of introducing optimized fins for heat transfer enhancement and uniform temperature …

A Constitutive Material Model For Simulating Texture Evolution And Anisotropy Effects In Cold Spray., Creston Michael Giles

Theses and Dissertations

Cold spray has seen rapid advancement since its inception and has shown significant potential as a method of additive manufacturing. However, the large plastic deformation and repeated heating/cooling cycles that the material undergoes during the cold spray process can result in gradients in material structure and large residual stresses. The purpose of this study is to extend the existing EMMI material model to include anisotropic material response through the use of orientation distribution functions to predict residual stresses and anisotropy resulting from cold spray and similar additive manufacturing processes. Through the use of a finite element simulation, yield surfaces for …

Development Of Alternative Air Filtration Materials And Methods Of Analysis, Ivan Philip Beckman

Theses and Dissertations

Clean air is a global health concern. Each year more than seven million people across the globe perish from breathing poor quality air. Development of high efficiency particulate air (HEPA) filters demonstrate an effort to mitigate dangerous aerosol hazards at the point of production. The nuclear power industry installs HEPA filters as a final line of containment of hazardous particles. Advancement air filtration technology is paramount to achieving global clean air. An exploration of analytical, experimental, computational, and machine learning models is presented in this dissertation to advance the science of air filtration technology. This dissertation studies, develops, and analyzes …

Surrogate Model-Based Design Optimization Of A Mobile Deployable Structure For Overpressure Load And Vehicular Impact Mitigation, Daniela F. Tellkamp

Theses and Dissertations

Artificial Neural Network (ANN) ensemble and Response Surface Method (RSM) surrogate models were generated from Finite Element (FE) simulations to predict the overpressure load and vehicle impact response of a novel rapidly deployable protective structure. A Non-dominated Sorting Genetic Algorithm-II (NSGA-II) was used in conjunction with the surrogate models to determine structure topology input variable configurations which were suited to produce the optimal balance of minimum mass, minimum rotation angle, minimum displacement, and maximum total length of the deployable structure. The structure was designed to retract into a container, be lightweight to facilitate transportation, and be able to adapt to …

Performance Analysis: Using The Northern Sea Route As An Alternative To Traditional Routes, Liangkun Xu, Qing Yu

Journal of Marine Science and Technology–Taiwan

The grounding accident of M/V EVER GIVEN in the Suez Canal causes a catastrophic loss on shipping companies. Alternatively, previous studies have presented encouraging findings of the remarkable benefits of time and cost saving in the Northern sea route (NSR) due to extend the ice-free time and shorten the distance. Ships using the NSR could shorten as much as 40% of the sailing distance from China (Shanghai) to Europe (Rotterdam) compared with the traditional route via the Suez Canal. This paper investigates the economic potential of using the NSR as a cost-effective route in comparison with Suez Canal Route (SCR) …

Numerical And Approximate Analytic Solutions Of Second- Order Nonlinear Boundary Value Problems, Chein-Shan Liu, Jian-Hung Shen, Yung-Wei Chen

Journal of Marine Science and Technology–Taiwan

The shooting method consists of guessing unknown initial values, transforming a second-order nonlinear boundary value problem (BVP) to an initial value problem and integrating it to obtain the values at the right end to match the specified boundary condition, which acts as a target equation. In the shooting method, the key issue is accurately solving the target equation to obtain highly precise initial values. Due to the implicit and nonlinear property, we develop a generalized derivative-free Newton method (GDFNM) to solve the target equation, which offers very accurate initial values. Numerical examples are examined to show that the shooting method …

Optimization Of Circular Silencers Internally Hybridized With Multiple Reverse Chambers Using The Ga Method, Min-Chie Chiu, Ying-Chun Chang, Tian-Syung Lan, Ho-Sheng Chen

Journal of Marine Science and Technology–Taiwan

A noise abatement method using an eigen function in conjunction with an optimizer (Genetic Algorithm) under a space-constrain situation is proposed in this study concerning a high order wave propagation effect. An eigen function is used to describe an acoustical field and shorten the acoustical model in a four-pole transfer matrix form. The system’s four-pole matrix estimates the Transmission Loss (TL) for the silencers by multiplying individual four-pole matrices.

Additionally, a case study of an air compressor’s broadband noise elimination is introduced. Three types of circular reverse silencers (silencers A-C) internally hybridized with multiple straight chambers are adopted to efficiently …

Numerical Investigation Of The Uncertainty Of Typhoon Wave Parameters Retrieval Using Hf Radar, Toan Duy Dao, Hwa Chien

Journal of Marine Science and Technology–Taiwan

The aim of this study was to identify the sources of uncertainties of typhoon wave field monitoring using HF radar and to quantitatively assess the bias of the wave parameters, such as significant wave height and mean period, retrieved under various conditions. The strategy was to apply a purely numerical simulation of the Doppler-range spectra and then compare the estimation results to the target. For the quantitative investigation, a numerical test-bed was established. The test-bed was used to simulate the Doppler spectra based on Barrick’s (1972) theory by using the input of the directional wave spectra. The typhoon wave spectra …

A Fused Data Based Real-Time Collision Warning System For Ferries In The Yangtze River, Xiaojia Liu, Ke Zhang, Han Xue, Yingtang Li

Journal of Marine Science and Technology–Taiwan

The risks for ferries in the Yangtze River are relatively high, as they frequently cross the main traffic flows, leading to more intersections with other upwards and downwards ships. Although some studies have developed many models to assess collision risks in the Yangtze River, collision warning studies on ferries are scant. Meanwhile, most of the current collision studies evaluate risk based on AIS data, which are incapable of providing real-time ship information as they are discrete-time series data. In this work, fused data combining radar and AIS data are applied in a real-time ship collision warning model to assess the …

Experimental Study Of The Effect Of A Solid Wing Conveyor On Marine Debris Collection, Erik Sugianto, Jeng-Horng Chen

Journal of Marine Science and Technology–Taiwan

Marine debris is a global problem that has not been resolved. This has encouraged the emergence of marine debris cleaning technologies, one of which is a conveyor ship. However, how effective conveyors are in collecting waste has not been studied. In this paper, experimental research on conveyors as marine debris collectors is investigated. The capability of catamarans with or without solid wing conveyors to collect marine debris is explored. Three kinds of marine debris collection models are used: no-wing conveyor, a 12.5-cm-long wing conveyor, and an 18.75-cm-long wing conveyor. Artificial marine debris (AMD) is spread on the water surface in …

Solving Nonlinear Boundary Value Problems With Nonlinear Integral Boundary Conditions By Local And Nonlocal Boundary Shape Functions Methods, Chein-Shan Liu, Yung-Wei Chen, Jian-Hung Shen

Journal of Marine Science and Technology–Taiwan

The paper considers the second-order nonlinear boundary value problem (NBVP), which is equipped with nonlinear integral boundary conditions (BCs). Two novel iterative algorithms are developed to overcome the difficulty of NBVP with double nonlinearities involved. In the first iterative algorithm, two nonlocal shape functions incorporating the linear integral terms are derived, and a nonlocal boundary shape function (NBSF) is formulated to assist the solution. Let the solution be the NBSF so that the NBVP can be exactly transformed into an initial value problem. The new variable is a free function in the NBSF, and its initial values are given. For …

Platinum-Iridium Alloys In Jewelry, Nathen C. Christa, Seth Walker, Dylan Hallman

ME 4133/6133 Mechanical Metallurgy

One of the most widely used metals on the periodic table is Platinum (Pt). The name is derived from the Spanish Platina, meaning “silver.” This malleable, ductile material is widely used in applications due to its unique chemical properties. A couple of these unique properties include a high melting point and good resistance to corrosion or chemical attack. Platinum materials have alloys that are indispensable in the chemical laboratory for electrodes. This allows for material applications in crucibles and dishes to withstand elevated temperatures. Platinum is used primarily in catalytic converters in vehicles converting emissions from the vehicle’s engine into …

High-Carbon Steel In Additive Manufacturing, Chidi N. Agusiegbe, Devin Morton, Emmanuel Moore

ME 4133/6133 Mechanical Metallurgy

High-carbon steel can be processed through numerous methods. The method that will be focused on primarily is processing high-carbon steel through means of additive manufacturing. Additive manufacturing is the industrial production name for 3D printing, a computer-controlled process that creates three-dimensional objects by depositing materials, usually in layers. AM methods like wire laser additive manufacturing (WLAM) and electron beam melting (EBM) are all common methods for fabricating high carbon steel. The perks associated with these methods are that they improve some drawbacks of the natural properties of high-carbon steel. This paper discusses the uses of these additive manufacturing methods along …

High Carbon Steel In Additive Manufacturing, Emmanuel Moore Ii, Devin Morton, Chid Agusiegbe

ME 4133/6133 Mechanical Metallurgy

The first known use of carbon steel dates back to 500 A.D. when a blacksmith mistakenly used iron ore as a primary material for smithing. This material, as the name suggests, is made up of both carbon and iron. This material, as one of the most abundant at the time, was used most frequently in European and Asian countries. “Carbon steel first appeared around the year 500 AD in Damascus steel swords as well as Japanese swords. They were prized for their sharp edges and sturdiness compared to other weapons of the era. The composition of these swords was very …

Integration Of Hadfield Steel Into Modern Body Armor, Jason T. Fridlund

ME 4133/6133 Mechanical Metallurgy

The increased lethality of recently fielded projectiles mandates a proportional escalation in armor performance. Recent advancements in ceramic technologies have allowed designers to incorporate harder but more brittle materials into hard armor designs to defeat yet more capable penetrating projectiles. Ceramics suffer from the feature of shattering, however, even when impacted by threats below their design parameters. While this shattering mechanism is used effectively to dissipate energy from high-energy rifle projectiles, it is wasted on low-energy projectiles, and can result in easily damaged lifesaving gear, both of which are undesirable in combat. In contrast, steel body armor has been used …

High Carbon Steel In Additive Manufacturing, Chidi Agusiegbe, Devin Morton, Emmanuel Moore

ME 4133/6133 Mechanical Metallurgy

Infographic demonstrating the composition, and use of high carbon steels as well as the process of the material in additive manufacturing.

Commercial Airliner Winglet Design Optimization – A Case Study, Anthony Gutierrez

Symposium of Student Scholars

The objective of this research is to determine the effect on aerodynamic performance due to changes of winglets design variables found of the Boeing 737-700 aircraft. The various winglet types studied in this research include the blended, canted, wingtip fence and split scimitar. The variables include height, sweep angle, taper ratio, and the inclination angle. These variables are altered in 5% increments from -15% to +15% of their original baseline values. Each altered winglet design only changes one variable at a time while keeping all other variables constant. The altered models are compared to the original by finding the aerodynamic …

Nanocomposites For Applications In Ultracapacitors Based Energy Storage Systems, Duy Pham, Jake Ivirn, Jacob Dileonardi, Ben Mckinney, Ashish Aphale

Symposium of Student Scholars

Electrochemical capacitors also known as ultracapacitor is a potential technology for modern energy storage due to their high performance of charge capacity and fast charge-discharge rates. The superior performance of ultracapacitors will help to meet demands for energy systems in applications such as transportation. Ultracapacitor device consists of electrodes, a polymeric separator, and an electrolyte. Under the applied voltage, the migration of ions between two porous electrodes from the bulk of the electrolyte governs the performance of such devices. In this work, we present experimental research on the synthesis of different electrode materials using atomically thick graphene and conducting polymers. …

Unmanned Aerial System Design For Civil Engineering Operations – A Vip Study, Ezra Robles, Harrison Vicknair, Derek Price, Logan Westra, George Pitcock, Joshua Diamond, Bhuvan Saraswat, Jeremiah Prayor, Fon Saliki

Symposium of Student Scholars

Unmanned Aerial System Design for Civil Engineering Operations – A Case Study

The objective of the project is to design and build a modular Unmanned Aerial System (UAS) that meets the specifications set forth by United Consulting – a local civil engineering company. These specifications are achieved through three unique missions. In each mission, data is collected using different methods. These missions include land surveying, bridge structure inspection and manhole probing. The key requirements of the drone are to maintain a minimum flight time of 30 minutes and the ability to receive and transmit telemetry, photographic and video data from …

Development Of Electrochemical Sensors For The Detection Of Trace Contaminants, Quang Lam, Ashish Aphale, Duy Pham

Symposium of Student Scholars

Several industrial processes, such as stainless steel fabrication and textiles, produce heavy metal byproducts such as chromium. These heavy metals have detrimental effects on the surrounding environments and humans. Recently, electrochemical-driven sensors have been studied and show great potential in miniaturization while still providing measurements at a low cost. In addition, atomically thin allotropes of carbon, graphene, and graphene oxide have shown remarkable results in producing a highly responsive and selective sensor platform. These results are due to their excellent electrical conductivity, high surface area for utility, and physicochemical stability. The existing challenge for electrochemical-driven sensors is understanding the molecular …

Impacts Of Thermally Conductive Coating On Super Coiled Polymers, Lakshay Battu, Siddharth I Sanghav, Mitchell Karwisch, Brandon Yang, Charles Brubaker

Symposium of Student Scholars

In this research, we created supercoiled polymer with a nylon fishing line, conductive thread, silver paste, graphite, and graphene. The silver paste was used for conductive properties on crimping joints to allow electrical connections. Graphite and graphene help stimulate heat dissipation, resulting in quicker muscle motion, contraction, and elongation. Supercoiled polymer (polymer coil) actuators have many uses and are inexpensive compared to other actuators as they can be made of cheap materials such as sewing threads and fishing lines. Compared with recent actuators consist of memory shape alloys for their unique crystal structure, however they are expensive to produce, and …

Sae 8620 Pspp Map - Infographic, John F. Mitchener

ME 4133/6133 Mechanical Metallurgy

This infographic summarizes a Processing-Structure-Property-Performance (PSPP) Map for SAE 8620 alloy steel, with an emphasis on the gas carburization process. This PSPP map allows researchers and material scientists to better understand the processes that drive the microstructures, material properties, and ultimate performance parameters.