Mechanical Engineering Commons^™

Thermal Testing And Characterization Of Nanoparticles Synthesized For Biological Treatment, Tonie Butler

Mechanical Engineering Undergraduate Honors Theses

The overall goal of this research project is to synthesize iron core, silica capped nanoparticles that, when they are exposed to a particular magnetic field, will react by increasing in temperature and emitting substantial thermal output. They will be injected into the human body for biological benefit by targeted thermal radiation. Once in the human body, ideally, they will be able to target a specific area, and then a magnetic field will be applied to induce thermal output through the process of hyperthermia. As the nanoparticles emit heat, they will mimic the natural bodily behavior seen by way of hyperthermia, …

Design And Control Of A Peristaltic Pump To Simulate Left Atrial Pressure In A Conductive Silicone Model, Jeremy Collins

Mechanical Engineering Undergraduate Honors Theses

According to the CDC, atrial fibrillation is responsible for more than 454,000 hospitalizations and approximately 158,000 deaths per year. A common treatment for atrial fibrillation is catheter ablation, a process in which a long flexible tube is guided through the femoral artery and to the source of arrhythmia in the heart, where it measures the electrical potential at various locations and converts problematic heart tissue to scar tissue via ablation. This paper details the design and control of a low-cost ($400) peristaltic pump system using repetitive control to replicate blood pressure in the left atrium in a conductive silicone model …

Multiscale And Multimaterial 3d Printing: Impact Of Feedstock Properties And Processing Parameters On Printed Parts, Kazi Md Masum Billah

Open Access Theses & Dissertations

Material extrusion additive manufacturing (AM) technology is one of the most commonly used technology to fabricate functional prototypes and end-use application parts with custom design. The evolution of the extrusion technology led this particular AM process to grow in many aspects such as new materials development, new design thinking, fabrication of parts in multiscale length, and manufacturing of monolithic parts with multiple functionalities. The research presented in this Dissertation results in the creation of knowledge in material extrusion AM technology with the length scale of production-grade to large-scale 3D printing machine those were used to enable the fabrication of multimaterial …

Fabrication And Testing Of Advanced Composites For Extreme Environments, Victoria Centeno

Open Access Theses & Dissertations

The following research focuses on the additive manufacturing and characterization of epoxy syntactic foams that utilize hollow carbon microspheres (CMS) and graphene-coated hollow carbon microspheres (GCMS) as fillers. The matrix that is utilized in this study is a thermoset epoxy resin, chosen for its high strength, low shrinkage, excellent adhesion to various substrates, effective electrical properties, chemical and solvent resistance, low cost, and low toxicity.1 CMS and GCMS were used as fillers for the properties they contribute to the overall epoxy syntactic foam, and can be seen in Fig.1.1. CMS consist of outer stiff carbon and inner gas, giving the …

Microstructural Evolution And Mechanical Properties Of L-Pbf Aerospace Alloys: Hydride- Dehydride Ti-6al-4v And Experimentally Heat-Treated Inconel 718, Jaime Varela

Open Access Theses & Dissertations

Experimental HIP and heat treatment cycles were applied to Laser Powder Bed Fusion fabricated Inconel 718 parts. Recent advances allow for rapid cooling in the HIPing chamber allowing one unit to perform HIP along with other heat treatment cycles such as solution annealing and ageing. Different cycles yield various effects on the porosity reduction as well as the growth of grain in the microstructure, consequently presented different mechanical properties. Specimens were therefore analyzed for density, microstructure, and tensile properties.

In addition, the mechanical and microstructural analysis of HDH Ti-6Al-4V was performed. The high cost of GA Ti64 material is a …

Effect Of Dopants On The Properties And Performance Of Gallium Oxide: Bulk Ceramics And Nanomaterials, Vishal Bhimrao Zade

Open Access Theses & Dissertations

A comprehensive investigation performed in order to understand the fundamental aspects of transition metal (TM) incorporation into Ga2O3, a wide band gap semiconductor with a huge potential for application in electronics, optics, micromechanics and optoelectronics. An approach is presented to tailor the structural, optical, electrical, mechanical properties of Ga2O3 ceramics and thin films. The tungsten (W) mixed Ga2O3 with variable W at% (Ga2-2xWxO3 ; 0.00 ≤ x ≤ 0.30) were synthesized by the high temperature solid state route involving a 2-step calcination process. The solubility limits and phase stability of the compounds are established. While solubility and phase stability occur …

Image Analysis Of Charged Bimodal Colloidal Systems In Microgravity., Adam J. Cecil

Electronic Theses and Dissertations

Colloids are suspensions of two or more phases and have been topics of research for advanced, tunable materials for decades. Stabilization of colloids is typically attributed to thermodynamic mechanisms; however, recent studies have identified transport or entropic mechanisms that can potentially stabilize a thermodynamically unstable colloidal system. In this study, suspensions of silsesquioxane microparticles and zirconia nanoparticles were dispersed in a nitric acid solution and allowed to aggregate for 8-12 days in microgravity aboard the International Space Station. The suspensions were subsequently imaged periodically at 2.5x magnification. Due to the inadequacy of existing image analysis programs, the python package “Colloidspy” …

Post Processing Of Electron Beam Melted Ti-6al-4v And Binder Jetted 17-4 Stainless Steel, Ahmad Omar Abu-Issa

Open Access Theses & Dissertations

An extensive assortment of HIP parameters have been altered on EBM fabricated Ti-6Al-4V and have shown that cooling rates of 103 oC/min from temperatures above and below the beta transus produced acicular alpha-prime martensite characteristic elongations < 10 %. Optimum yield strength (0.9 GPa), UTS (1.0 GPa) and elongation (~14 %) were achieved for slow cooling (at 102 oC/min) from 850 oC HIP which produced a dense, Widmanstatten alpha structure within the retained, as-fabricated columnar grains by alpha-prime decomposition. These results suggest that manipulation of AM process parameters to produce a small-grain, equiaxed microstructure, HIPed below the beta transus and slow cooled, will have a wide range of superior, isotropic mechanical properties corresponding to a Widmanstatten alpha microstructure within the equiaxed grains. Also, Binder Jetting printing parameters for differing PSD's of low-cost water-atomized 17-4 Stainless Steel were optimized in order to produce high dense parts. Densities ranging from 94-97.5% were achieved, and issues of inhomogeneous porosity were addressed using a fumed silica flow additive.

Aloe Vera Extract-Based Composite Nanofibers For Wound Dressing Applications, Raul Barbosa, Alexa Villarreal, Cristobal Rodriguez, Heriberto De Leon, Robert Gilkerson, Karen Lozano

Mechanical Engineering Faculty Publications

Natural, biocompatible, and biodegradable composite nanofibers made of Aloe vera extract, pullulan, chitosan, and citric acid were successfully produced via Forcespinning® technology. The addition of Aloe vera extract at different weight percent loadings was investigated. The morphology, thermal properties, physical properties, and water absorption of the nanofibers were characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The developed nanofiber membranes exhibited good water absorption capabilities, synergistic antibacterial activity against Escherichia coli, and promoted cell attachment and growth. Its porous and high surface area structure make it a potential candidate for wound dressing …

Analysis On Fuel Options For Scramjet Engines With The Study To Lower The Starting Mach Number, Sumantra Luitel, Gagan Dangi

Honors Theses

The main objectives of this report were to perform analysis of an ideal scramjet engine, to assess the influence of fuel on endurance factor, and the possibility of lowering the starting Mach Number of the scramjet. In the first part, an ideal cycle parametric analysis was conducted on three different fuels i.e. Liquid Hydrogen (LH2), Jet Propellant 7 (JP-7), and Rocket Propellant (RP-1), taking into account their availability, physical properties, current uses, and potential uses. The detailed analysis is done largely relying on a 9 step Parametric Cycle Analysis technique to study how fuel properties influence the variation of seven …

Centrifugally-Spun Ceramic/Carbon Composite Fibers And Their Use As Anode Materials In Li-Ion Batteries, Gabriel Gonzalez

Theses and Dissertations

The work in this thesis focuses in the study of Centrifugally Spun Short Fiber Composites and their Implementation as Alternate Anode Material in Li-Ion Batteries. Due to their high theoretical capacity, abundance, and environmental friendliness, metal oxides have been widely studied as alternate anode materials for lithium ion batteries (LIBs). In this research work, the processing of SnO2 and SnO2/TiO2 ceramic short fibers as well as flexible and porous metal oxide carbon fibers (FPMOCFs) by centrifugal spinning followed by an optimized coating technique is reported. In addition, the electrochemical performance of the composites was also investigated and is provided.

Study Of Particle Size Effect On The Performance Of Tio2 Nanoparticles As Lubricant Additives On Vegetable Oil-Based Nanolubricants, Dario F. Rodriguez

Theses and Dissertations

Recently there has been an increase in concern regarding the use of petroleum-based lubricants. This has created an interest in readily available biodegradable lubricants such as vegetable oils. This work evaluates the rheological and tribological performance of grapeseed, and sunflower oils altered with 5, 18, and 40 nanometer titanium dioxide (TiO2) nanoparticles at differing concentrations. Block-on-ring tests were performed using the ASTM G-077-05 standard procedure. The effect of nanoparticle size and concentration and shear rate on the viscosity were evaluated and the experimental data was compared to conventional models. Roughness tests were performed on the wear scar of the blocks …

Development And Characterization Of Nanofiber-Based Thermoelectric And Piezoelectric Composites, Julio Enrique Trevino

Theses and Dissertations

This study focuses on the development and characterization of nanofiber-based composites with the goal of developing flexible, lightweight, and cost effective thermoelectric and piezoelectric devices. The following materials were used in the development of the composites: polyvinylidene fluoride (PVDF) with polyaniline (PANI), polypyrrole (PPY), polyindole (PIN), polyanthranilic acid (PANA), polycarbazole (PCZ), polyacrylonitrile (PAN), functionalized multi-walled carbon nanotubes (MWCNT-COOH), and camphorsulfonic acid (CSA). Blends and in-situ polymerization techniques were utilized to increase the desired thermoelectric/piezoelectric response. Nanofiber systems were produced utilizing the Forcespinning® technique. The morphology, structure, electrochemical, thermal stability, thermoelectric, and piezoelectric performance was analyzed. All of the nanofiber PVDF/CP …

Assessing The Feasibility Of A Biofilter In Medium-To-High Scale Industries, Javier A. Garcia

Theses and Dissertations

The removal of volatile organic compounds, VOCs, from contaminated sources of air stream has become a major air pollution risk. Excessive amounts discharged to the atmosphere are highly risky to human health and to the environmental system. Demand for sustainable VOC control technologies has become crucial for the reduction of emissions. Biological treatments of waste gas streams, such as biofiltration, have proven to be cost effective and environmentally friendly compared to conventional pollution control technologies. The goal of this research is to simulate data for a given biofilter model, and to evaluate if it is economically and environmentally feasible to …

Binary Particle Mixtures As A Heat Transfer Media In Shell-And-Plate Moving Packed Bed Heat Exchangers, Chase Ellsworth Christen

Boise State University Theses and Dissertations

Solid particles are being considered in several high temperature thermal energy storage systems and as heat transfer media in concentrated solar power (CSP) plants. The downside of such an approach is the low overall heat transfer coefficients in shell-and-plate moving packed bed heat exchangers caused by the inherently low packed bed thermal conductivity values of the low-cost solid media. Choosing the right particle size distribution of currently available solid media can make a substantial difference in packed bed thermal conductivity, and thus, a substantial difference in the overall heat transfer coefficient of shell-and-plate moving packed bed heat exchangers. Current research …

First-Principles Studies Of Nucleation Of Atomic-Layered Molybdenum Disulfide By Atomic Layer Deposition, Matthew Lawson

Boise State University Theses and Dissertations

This dissertation implements first-principles calculations to understand the nucleation mechanisms for atomic layer deposition (ALD) of molybdenum disulfide (MoS₂) using MoF₆ and H₂S precursors. ALD is a self-limiting process that can deposit a range of materials at the nanoscale, while maintaining chemical stoichiometry, atomic scale thickness control, and can conform to high-aspect ratio substrate designs. ALD is extremely sensitive to surface chemistry and morphology; therefore, it is critical to understand how these factors control deposition.

Density functional theory (DFT) was used to understand what factors can control the nucleation for ALD of MoS₂ using …

Healthy Aging In Place: An Integrated Smart Home Using Alexa-Compatible Technology, Tyler Kryst

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this research was to address current healthcare concerns among the aging population. Around the globe, the average life expectancy is projected to continue increasing resulting in a higher prevalence of age-related disease. With the ever-increasing capabilities of modern technology, it is necessary to apply this technology to increase the health and safety of older adults. This work had three objectives. The first objective was the establishment of an integrated smart home aimed at creating a healthy aging-in-place environment through the use of Alexa. The second objective was the development and integration of a completely custom health device …

Modeling And Energy Simulation Of A Zero Energy Building: A Case Study For Florida, Mariana Migliori Favaretto

Theses and Dissertations

The study of energy consumption in buildings is an important area of research given the large share of building sector in the worldwide energy usage. The energy consumption of buildings has a high impact on carbon emissions, a greenhouse gas which has proved to play a major role in global warming. In the last decades, global warming has become an increasing concern and worldwide high energy demand have awaken a pressing quest towards improving building energy efficiency. Reducing buildings’ energy usage by implementing energy efficiency measures is one way towards a sustainable future for any country in the world. This …

Flagellation Testing Of Composite Finger Skirts For Surface Effect Ship (Ses) Application, Natalie Marie Holliday

Theses and Dissertations

The objective of this research is to create flagellation data for SES finger skirts. The SES design allows it to have a high tonnage with low draft, little drag, low wavemaking resistance, remarkable carrying capacity, and incredible propulsive efficiency. A SES is a sidehull hovercraft, with air cavity sealing components at the bow and stern. The fingers at the bow collectively make up an elastic, flexible full sealing skirt, dissipating oncoming waves and allowing for the vessel to be self-stabilizing. The problem with SES vessels is that the bow finger skirts wear significantly over a short period of time (~ …

Replication And Tribological Engineering Of Physical Surfaces Using Two-Photon Lithography, Shelby Robert Maddox

Graduate Theses and Dissertations

Up to one-fifth of all energy consumed each year goes directly to overcoming frictional effects. This waste will remain even if renewable energy becomes feasible as a large-scale replacement for conventional fuel sources. If that wasted energy could be saved instead, then overall energy consumption could either decrease or be redirected to where it would be most beneficial to human and environmental flourishing. To this end, there is a need for strategies and techniques to reduce frictional energy loss. It is well established that surface texturing can be used to reduce friction. There are many industrial methods in current use …

Performance And Economics Of Solar Inverters And Module Level Power Electronics In A 1 Mw Photovoltaic System, Maxwell Criswell

Biological and Agricultural Engineering Undergraduate Honors Theses

Photovoltaic solar panels convert sunlight to electricity in the form of direct current; therefore, a necessary component of every photovoltaic system is an inverter to convert the electricity to usable alternating current. There are various commercially available inverter technologies manufactured today such as microinverters, string inverters, and central inverters, as well as module level power electronic devices such as DC optimizers that are capable of improving system performance in string and central inverter systems. This thesis compares the performance and economics of five different inverter and module level power electronic systems through model simulation using Helioscope software. The five alternatives …

Inverse Methods For Near-Real Time Estimation Of Surface Heat Flux In Thermal Protection Systems For Space Vehicles, Obinna Oluchukwu Ugochukwu Uyanna

Theses and Dissertations

With the increased goal of manned explorations to outer space, safety during the atmospheric entry/reentry process is paramount as the incident heat fluxes on the surface of vehicle can reach critical values. Thermal Protection Systems (TPS) are therefore essential components in space vehicles as they ensure the safety and protection of the payload and cargo. In order to ensure improved active control capabilities and prolonged used of the vehicle, TPS surface conditions need to be known and determined. Since direct measurement of the surface heat flux using sensors is not feasible, one alternative involves the use of temperature sensors located …

Plasma Aerodynamics: Experimental Quantification Of The Lift Force Generated On An Airfoil Using Plasma Actuation To Estimate Power Requirements In Small Uav Applications, Getachew Ashenafi

UNLV Theses, Dissertations, Professional Papers, and Capstones

This research addressed the amount of electric power required to induce specific changes in lift force using a NACA 2127 airfoil with a chord length of ~28 mm, connected to a micro load cell, in a wind tunnel of 103 square centimeter cross-section. A DBD plasma actuator supplied by a ZVS driven high voltage pulsed DC circuit, operating at a frequency of 17.4 kHz, was utilized for voltages of up to 5000 V. Two configurations of electrode gapping were compared to determine the efficient use of power. The configuration with a gap of ~1 mm between the upstream and downstream …

Patient-Specific Finite Element Analysis For Mandibular Fracture Fixation, Ethan Snyder

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis proposes an approach for Finite Element Analysis (FEA) of mandibular fracture fixation. Using a Computerized Tomography (CT) scan of mandible obtained from a specific person, the material characteristics, density and modulus of elasticity, were determined from a set of discrete points within the mandible that are 1mm spaced based on the Hounsfield Units of these points. The mandible geometry was sectioned to simulate a fracture. Muscle and mastication forces were added to replicate post-surgery loading. Using a standard linear miniplate, this material model was compared with two commonly used mandibular cortical shell bone models: isotropic and orthotropic. A …

A Hyperelastic Porous Media Framework For Ionic Polymer-Metal Composites And Characterization Of Transduction Phenomena Via Dimensional Analysis And Nonlinear Regression, Zakai J. Olsen

UNLV Theses, Dissertations, Professional Papers, and Capstones

Ionic polymer-metal composites (IPMC) are smart materials that exhibit large deformation in response to small applied voltages, and conversely generate detectable electrical signals in response to mechanical deformations. The study of IPMC materials is a rich field of research, and an interesting intersection of material science, electrochemistry, continuum mechanics, and thermodynamics. Due to their electromechanical and mechanoelectrical transduction capabilities, IPMCs find many applications in robotics, soft robotics, artificial muscles, and biomimetics. This study aims to investigate the dominating physical phenomena that underly the actuation and sensing behavior of IPMC materials. This analysis is made possible by developing a new, hyperelastic …

Development Of An Intraperitoneal Catheter Placement Device For Use On The Battlefield, Riley Reynolds

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The objective of this project was to simplify peritoneal cavity access so an Airforce field medic can safely infuse oxygen microbubbles (OMBs) into the intraperitoneal space for the emergency treatment of hypoxia due to lung damage. To solve this problem, we created an intraperitoneal catheter placement device for use on the battlefield. The three common methods and some of the most common devices for peritoneal cavity access were reviewed. Injury frequencies for each of the three methods were analyzed. The results showed that each of the access techniques gives a similar rate of iatrogenic injury.

The battlefield conditions where the …

Sonic Boom Loudness Reduction Through Localized Supersonic Aircraft Equivalent-Area Changes, Troy A. Abraham

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The NASA University Leadership Initiative (ULI) titled “Adaptive Aerostructures for Revolutionary Civil Supersonic Transportation” looks to study the feasibility of distributed structural adaptivity on a supersonic aircraft for maintaining acceptable en-route sonic boom loudness during overland flight. The ULI includes a team of industry and university partners that are working together to develop and implement the systems necessary to accomplish this goal.

The Utah State University Aerolab is a member of this ULI team and has been tasked with developing and using low-fidelity supersonic aerodynamic and sonic boom predictions tools to rapidly study the effects of localized geometry changes on …

Computational Fluid Dynamics Benchmark Validation Experiment Of Plenum-To-Plenum Flow Through Vertical Heated Parallel Channels, Austin W. Parker

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The next generation of nuclear power plants will have higher efficiency and improved safety, among other benefits; one attractive option is the high temperature gas reactor. An ability to predict the physics that occur within the reactor under normal conditions and accident scenarios is necessary before it receives regulatory licensing for use. The flow through a high temperature gas reactor involves complex interactions of heat transfer, fluids, and solids.

One method for simulating complex fluid dynamics is called Computational Fluid Dynamics. These simulations have already been used to predict the complex fluid flows found in high temperature gas reactors. Predicting …

Modeling, Simulation And Optimization Of Nuclear Hybrid Energy Systems Using Openmodelica And Raven, Stephen Michael Hills

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Nuclear hybrid energy systems (NHES) are a viable option to combine renewable energy sources, such as wind, with a less fluctuating energy source. Given recent development and their inherent safer and modular design, small modular reactors (SMRs), which are smaller versions of a nuclear reactor, can play an instrumental role in complementing renewables and supporting carbon-free power sectors in the coming decades. With increasing population and demand for clean water, Freeze desalination (FD), which uses freezing to separate water from salt, is a possible way to produce clean water while converting excess power from a SMR into stored thermal energy …

Multi-Degree Of Freedom Position And Attitude Control Of Rings Dipoles Using Electromagnetic Forces And Torques, David Andres Alvarez

Theses and Dissertations

Satellite formation flight (SFF) is likely to transform and advance the scope of space missions in the near future. Some considerable benefits of SFF to a mission include robustness, adaptability, and potential cost savings. However, satellite formations face a fuel expenditure issue: the more spacecraft there are to control, the more fuel will be expended on alignment and maneuvering. A solution to this problem is Electromagnetic Formation Flight (EMFF), which is the application of conductive coils in producing electromagnetic fields that can interact with the fields of other coils in a formation to exchange forces and torques. With three orthogonal …