Mechanical Engineering Commons^™

In Vivo Printing Of Growth Factor-Eluting Adhesive Scaffolds Improves Wound Healing, Kristo Nuutila, Mohamadmahdi Samandari, Yori Endo, Yuteng Zhang, Jacob Quint, Tannin A. Schmidt, Ali Tamayol, Indranil Sinha

Department of Mechanical and Materials Engineering: Faculty Publications

Acute and chronic wounds affect millions of people around the world, imposing a growing financial burden on patients and hospitals. Despite the application of current wound management strategies, the physiological healing process is disrupted in many cases, resulting in impaired wound healing. Therefore, more efficient and easy-to-use treatment modalities are needed. In this study, we demonstrate the benefit of in vivo printed, growth factor-eluting adhesive scaffolds for the treatment of full-thickness wounds in a porcine model. A custom-made handheld printer is implemented to finely print gelatin-methacryloyl (GelMA) hydrogel containing vascular endothelial growth factor (VEGF) into the wounds. In vitro and …

High-Throughput Computation Of New Carbon Allotropes With Diverse Hybridization And Ultrahigh Hardness, Mohammed Al-Fahdi, Alejandro Rodriguez, Tao Ouyang, Ming Hu

Faculty Publications

The discovery of new carbon allotropes with different building blocks and crystal symmetries has long been of great interest to broad materials science fields. Herein, we report several hundred new carbon allotropes predicted by the state-of-the-art RG² code and first-principles calculations. The types of new carbon allotropes that were identified in this work span pure sp² , hybrid sp²/sp³ , and pure sp³ C–C bonding. All structures were globally optimized at the first-principles level. The thermodynamic stability of some selected carbon allotropes was further validated by computing their phonon dispersions. The predicted carbon allotropes …

Reshaping The Landscape Of The Future: Software-Defined Manufacturing, Lei Xu, Lin Chen, Zhimin Gao, Hiram Moya, Weidong Shi

Computer Science Faculty Publications

We describe the concept of software-defined manufacturing, which divides the manufacturing ecosystem into software definition and physical manufacturing layers. Software-defined manufacturing allows better resource sharing and collaboration, and it has the potential to transform the existing manufacturing sector.

Centralized And Decentralized Optimal Control Of Variable Speed Heat Pumps, Ryan S. Montrose, John F. Gardner, Aykut C. Satici

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Utility service providers are often challenged with the synchronization of thermostatically controlled loads. Load synchronization, as a result of naturally occurring and demand-response events, has the potential to damage power distribution equipment. Because thermostatically controlled loads constitute most of the power consumed by the grid at any given time, the proper control of such devices can lead to significant energy savings and improved grid stability. The contribution of this paper is the development of an optimal control algorithm for commonly used variable speed heat pumps. By means of selective peer-to-peer communication, our control architecture allows for the regulation of home …

Material Detection With Thermal Imaging And Computer Vision: Potentials And Limitations, Jared Poe

Graduate Theses and Dissertations

The goal of my masters thesis research is to develop an affordable and mobile infraredbased environmental sensoring system for the control of a servo motor based on material identification. While this sensing could be oriented towards different applications, my thesis is particularly interested in material detection due to the wide range of possible applications in mechanical engineering. Material detection using a thermal mobile camera could be used in manufacturing, recycling or autonomous robotics. For my research, the application that will be focused on is using this material detection to control a servo motor by identifying and sending control inputs based …

Computational Frameworks For Multi-Robot Cooperative 3d Printing And Planning, Laxmi Prasad Poudel

Graduate Theses and Dissertations

This dissertation proposes a novel cooperative 3D printing (C3DP) approach for multi-robot additive manufacturing (AM) and presents scheduling and planning strategies that enable multi-robot cooperation in the manufacturing environment. C3DP is the first step towards achieving the overarching goal of swarm manufacturing (SM). SM is a paradigm for distributed manufacturing that envisions networks of micro-factories, each of which employs thousands of mobile robots that can manufacture different products on demand. SM breaks down the complicated supply chain used to deliver a product from a large production facility from one part of the world to another. Instead, it establishes a network …

Tribological Studies Of Thick Polytetrafluoroethylene Coatings Enhanced By Polydopamine And Nanoparticles, Sujan Kumar Ghosh

Graduate Theses and Dissertations

Polytetrafluoroethylene (PTFE) is a popular low friction solid lubricant with high chemical and thermal stability. Thick PTFE coatings have the potential for many tribological applications, such as replacing Tin-based Babbitt materials in journal bearings. However, the weak bonding strength to the substrate and the high wear rate of PTFE coatings are current limiting factors. The lack of understanding of their tribological properties and wear mechanisms in oil-lubricated conditions and how coating thickness affects the tribological performance further hindered the use of PTFE coatings. In this dissertation, polydopamine (PDA), a bio-inspired adhesive, is used as an underlayer for or as a …

Development Of Novel Battery Materials For Lithium-Ion Batteries And Beyond, Jiyu Cai

Graduate Theses and Dissertations

As fossil fuels are depleting and causing environmental issues, it becomes imperative to widely implement renewable energies (e.g., solar and wind power). In this context, electrical energy storage (EES) systems are essential to accommodate the intermittent supply and uneven distribution of renewable energies. To this end, high-energy-density EES devices are highly demanded, such as rechargeable batteries. This dissertation presents my efforts in developing novel battery materials for lithium-ion batteries (LIBs), sodium-ion batteries (SIBs), and solidstate lithium batteries (SSLBs). These efforts include electrochemical evaluations of battery materials, surface modifications of electrodes via atomic layer deposition (ALD), and advanced characterizations of batteries …

Phase-Field Modeling Of The Polymer Membrane Formation Process For Micro- And Ultra-Filtration, Michael Rosario Cervellere

Graduate Theses and Dissertations

Porous polymer membrane filters are widely used in separation and filtration process. Micro- and ultra-filtration membranes are commonly used in biopharmaceutical applications such as filtering viruses and separating proteins from a carrier solution. The formation of these membrane filters via phase inversion is a complex and interconnected process where varying casting conditions can have a wide variety of effects on the final membrane morphol- ogy. Tailoring membrane filters for specific performance characteristics is a tedious and time consuming process. The time and length scales of membrane formation make it extremely difficult to experimentally observe membrane formation. Modeling the membrane formation …

Influence Of Extracellular Matrix Stiffness And Topography On Neuronal Cell Behavior And Neurite Outgrowth, Mohan Yasodharababu

Graduate Theses and Dissertations

The focus of regeneration therapy for traumatic brain injuries and Alzheimer's disease is on the promotion and growth of neuronal cells. In vitro research attempts to improve this by modifying the stiffness and topography of the extracellular matrix (ECM). However, the limitations of in vitro experiments make it difficult to control the individual factors influencing neuronal cell growth. A computational model can be used to decouple individual factors and study them individually to gain a better understanding of the mechanics between the neuronal cell and ECM, which will aid in the design of in vitro experimental studies.

This study develops …

Review: Factors Affecting Composite Laminates Against Lightning Strikes, Aaryan Manoj Nair

Publications and Research

Lightning strike protection (LSP) have recently been a newly developing field particularly with the emergence of graphene thin film integration into carbon fiber composite structures. This technology has a widespread application in airplanes, wind turbines, and other instruments which are susceptible to frequent lightning strikes. Electrical discharge of the instrument in a safe manner is vital for the safety of the passengers (in the case of flights) as well as the integrity of the aircraft structures because of their specific mechanical and structural properties, which are essential for their functioning. The purpose of the study is to fabricate graphene thin …

Anisotropic Plasticity Modeling Of Thin Sheets And Its Application To Micro Channel Forming Of Steel Foils, Jie Sheng

Mechanical Engineering Research Theses and Dissertations

Thin sheet metals and ultrathin metal foils produced by industrial rolling processes are textured polycrystalline materials and their mechanical behaviors may depend strongly on the orientation of applied loading. Consideration of such plastic anisotropy in advanced modeling of these materials is of the paramount importance in designing optimal manufacturing processes for automotive and other applications using finite element methods. This research addresses several critical issues in anisotropic plasticity modeling and its applications in analyzing micro channel forming of ultrathin stainless-steel foils. An experimental study has first been carried out on the accuracy and sensitivity of measuring the plastic strain ratios …

Jme 4110: Water Reservoir Energy Storage, Kristen Grace, Supapan Thammanok, Leticia Zoratto Lunge

Washington University / UMSL Mechanical Engineering Design Project JME 4110

The goal of this project was to create a demonstrative model of a Pumped Hydroelectric Storage System (PHS). A PHS stores energy by draining water from an upper reservoir through a turbine to generate electricity. This water is then pumped from a lower reservoir to the original upper reservoir to restart the system cycle. Using existing PHS applications, a small-scale prototype was built using an aquarium pump and mini turbine, along with PVC and plastic containers. When water is run through the system, a multimeter can be used to show the power output of the system. In addition to functionality, …

Modeling Interactions In Concentrated Ceramic Suspensions Under Ac Electric Field, Naga Bharath Gundrati

Mechanical & Aerospace Engineering Theses & Dissertations

Colloidal processing of ceramics manipulates the interaction forces using additives or external energy field between the suspending particles to fabricate complex structures. Under AC electric field, mutual dielectrophoretic (DEP) forces between particles create particle chaining. Dielectrophoresis (DEP) is adopted to control ceramic particles in the colloidal suspension, which can benefit from employing DEP forces to externally control the fabrication of ceramic materials with desired porosity and hierarchical structure. To this end, it is crucial to understand the interactions between ceramic particles in aqueous media and AC electric field. The dynamic interactions of ceramic particles under AC electric field are modelled …

Handwriting Correction System Using Wearable Sleeve With Optimal Tactor Configuration, Dhanya Nair, Grant Stankaitis, Sean Duback, Robert Geoffrion, Justin B. Jackson

Engineering Faculty Articles and Research

Handwriting remains an elusive skill with practice worksheets being the common method of learning. Since these worksheets provide only visual feedback and no quantitative feedback, it can often be a challenge to improve. For children with learning disabilities, learning handwriting skills is one of the most difficult tasks. We propose a handwriting training system that uses off-the-shelf webcam, a pen tracking software and a haptic sleeve which provides active feedback to the user based on their deviation from the original pattern. The sleeve has 4 individual motors that vibrate at different intensities based on the direction (right, left, up or …

Scalability Of The Size Of Patterns Drawn Using Tactile Hand Guidance, Dhanya Nair

Engineering Faculty Articles and Research

Haptic feedback for handwriting training has been extensively studied, but with primary focus on kinematic feedback. We provide vibrotactile feedback through a wrist worn sleeve to guide the user to recreate unknown patterns and study the impact of vibrational duration (1, 2, 3 seconds) on pattern scaling. User traces a line at 90° angles, while attempting to maintain a constant speed, in the direction of the motor activated till a different motor activation is perceived. Shape and size are two features of good letter formation. Study performed on three subjects showed the ability to utilize four vibrotactile motors to guide …

Jme 4110: Extended Hole Punch, Lucas Mennemeier, Jason Zobrist

Washington University / UMSL Mechanical Engineering Design Project JME 4110

DESIGN AND DEVELOP A WORKING PROTOTYPE OF A SINGLE-HAND, SINGLE-HOLE PUNCH WITH AN EXTENDED THROAT THAT WILL BE ABLE TO REACH FURTHER INTO A SHEET OF PAPER THAN A STANDARD SINGLE-HOLE PUNCH. THIS CAN BE A PUNCH ATTACHMENT OR A STAND-ALONE DEVICE. EITHER DESIGN CHOSEN WILL ALSO BE ABLE TO BE CONVERTED INTO AN EMBOSSING TOOL FOR EMBOSSING SEALS INTO DOCUMENTS

Jme 4110: Drag Line Wind Energy Generator, David Gengenbacher, Mouhamadou Bamba Kane, Brian Bakula

Washington University / UMSL Mechanical Engineering Design Project JME 4110

The goal of this project was to develop a prototype capable of power a 10 watt light bulb using only the energy from wind.

Jme 4110: Mass Production Of Multi-Sphere Approximated Parts, Christopher Hartley, Chad Gorski, Matthew Brady

Washington University / UMSL Mechanical Engineering Design Project JME 4110

For this project, the team needs to design a mass production manufacturing process. The product of the process will be parts that represent, as closely as possible, approximations of parts developed using Discrete Element Modelling (DEM) software. Since the software uses spheres to efficiently model complex parts, the manufacturing process must also utilize spheres as the building blocks for the approximated parts. As a proof of concept, this project uses river pebbles as the parts being approximated by the software and modeled by the multi-sphere production process.

Jme 4110: Lego-Lock Block, Diana Engelhardt, Dmitriy Kornyukhov, Chelsea Borders

Washington University / UMSL Mechanical Engineering Design Project JME 4110

Design a building block device that assembles similarly to a LEGO brick, but also has the capability to lock an assembly state between two bricks. Scale (size) not critical for this proof of concept (standard LEGO blocks may be too small for this first attempt).

Assessment Of Heat-Affected Zone Softening Of Hot-Press-Formed Steel Over 2.0 Gpa Tensile Strength With Bead-On-Plate Laser Welding, Kwangsoo Kim, Namhyun Kang, Minjung Kang, Cheolhee Kim

Mechanical and Materials Engineering Faculty Publications and Presentations

High-strength hot-press-formed (HPF) steels with a fully martensitic microstructure are being widely used in the fabrication of automotive body structure, and 2.0 GPa-strength HPF steel has recently been commercially launched. However, heat-affected zone (HAZ) softening is unavoidable in welding martensitic steel. In this study, the HAZ softening characteristic of 2.0 GPa HPF steel was investigated by applying a high-brightness laser welding process, wherein the heat input was controlled by varying the welding speed. Microstructural evaluation and hardness test results showed that the base metal with a fully martensitic microstructure was changed to the same type of fully martensitic microstructure in …

High Temperature Degradation In Gan-Based Hall Effect Sensors, Alexis Anne Krone

Graduate Theses and Dissertations

This research focuses on understanding the effects of accelerated aging through temperature and environment on novel gallium nitride-based Hall effect magnetic field sensors and determining device reliability under electric vehicle operating conditions. The device reliability was modeled using accelerated aging for the temperatures of 200 °C, 350 °C, 450 °C, and 600 °C under various time steps unique to each temperature and either air, which is identical to operating circumstances, or argon, which would model the hermetic packaging environment. Using a high temperature furnace and oven, devices underwent high temperature storage tests at a chosen temperature and time step. Afterwards, …

Near-Shore Sediment Transport Under Cnoidal Waves Using Particle Image Velocimetry, Jenna Rose Katrina

Theses and Dissertations

With future trends showing a higher percentage of the human population living along the coast, coastal resilience is a significant topic of concern for many researchers. The purpose of this research was to analyze near-shore sediment transport under different wave parameters using the technique of Particle Image Velocimetry (PIV) and laboratory studies for linear and nonlinear cnoidal waves. At the deeper extent of the nearshore profile, waves will tend to be linear, having an Ursell number less than 40, with little or no net sediment transport due to orbital velocities. The velocities are the same under the crest and trough …

Analysis Of A Non-Equilibrium Vortex Pair As Aircraft Trailing Vortices, Manuel Ayala

Mechanical & Aerospace Engineering Theses & Dissertations

Shortly after the roll-up evolution of the vortex sheet behind the wings of an aircraft, a coherent counter-rotating vortex pair emerges. Presence of this vortex pair in the downstream of an aircraft, creates unsafe conditions for other aircraft, especially near airport runways. Fundamental knowledge of the physics that govern the formation, duration and dissipation of aircraft wake vortices is desirable in order to improve aircraft operational safety. This study uses non-equilibrium pressure theory to develop an accurate model describing the physical behavior of the vortex pair created by an aircraft in the early to mid-field vortex regime. An isolated aircraft …

Development And Applications Of Adjoint-Based Aerodynamic And Aeroacoustic Multidisciplinary Optimization For Rotorcraft, Ramiz Omur Icke

Mechanical & Aerospace Engineering Theses & Dissertations

Urban Air Mobility (UAM) is one of the most popular proposed solutions for alleviating traffic problems in populated areas. In this context, the proposed types of vehicles mainly consist of rotors and propellers powered by electric motors. However, those rotary-wing components can contribute excessively to noise generation. Therefore, a significant noise concern emerges due to urban air vehicles in or around residential areas. Reducing noise emitted by air vehicles is critically important to improve public acceptance of such vehicles for operations in densely populated areas.

Two main objectives of the present dissertation are: (1) to expand the multidisciplinary optimization to …

Numerical Investigation Of Thermo-Mechanical Field During Selective Laser Melting Process With Experimental Validation, Lan Li, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this study, thermo-mechanical simulation was conducted to predict thermal and stress behavior in Selective Laser Melting (SLM). Temperature-dependent material properties for processed material 304L stainless steel were incorporated into the model in order to capture the change from powder to fully dense solid stainless steel. Temperature and thermal stress history were tracked under conditions of different parameter sets which were designed to reduce defect formation. The thermal model predicted the temperature history for multi-track scans under different process parameters, such as laser power, effective scanning speed and hatch spacing. Subsequently, the corresponding melt-pool size, solidification rate and temperature gradients …

Bioinspired Fabrication Of Reconfigurable Elastomeric Cementitious Structures Using Self-Healing Mechanical Adhesives Interfaces, Vanessa Restrepo, Ramses V. Martinez

Purdue University Libraries Open Access Publishing Fund

Modern construction technologies are in high demand of new highly customizable and easy-to-assemble structural materials with enhanced mechanical performance and the capability to self-repair autonomously. This article describes the simple and cost-effective manufacturing of Self-Healing Elastomeric/Cementitious/Mechanical Adhesive Structures (SECMAS). SECMAS are comprised of cementitious bricks joined by mechanical adhesive interfaces and organized in nacre-inspired, brick-and-mortar structures. This scalable staggered design provides SECMAS with the capability to concentrate the formation and propagation of cracks along the mechanical adhesive interfaces, which efficiently distribute loading forces and accommodate deformation. The periodic distribution of elastomeric reinforcing layers inside the SECMAS facilitates its elastic self-recovery …

Quality Mentorship Matters: An Innovative Approach To Supporting Student Success In Engineering Undergraduate Research, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

In this research study, the authors developed a new model of mentorship for faculty members to engage and support their group of students conducting undergraduate engineering research. Research efforts attest that mentoring undergraduate students is a critical role that can dramatically enhance student academic and personal outcomes. This finding is magnified in the context of STEM related disciplines, such as engineering, where efforts to pro-actively diversify the workforce are taking shape. Yet, not every form of faculty-student mentorship is proven to be effective, particularly when faculty conceal forms of knowledge and information regarding internship/employment resources, departmental and research opportunities, curriculum …

The Influence Of Participation In A Multi-Disciplinary Collaborative Service Learning Project On The Effectiveness Of Team Members In A 100-Level Mechanical Engineering Class, Stacie I. Ringleb, Pilar Pazos, Julia Noginova, Francisco Cima, Orlando Ayala, Krishnanand Kaipa, Jennifer Kidd, Kristie Gutierrez

Mechanical & Aerospace Engineering Faculty Publications

Engineers need to develop professional skills, including the ability to work successfully in teams and to communicate within and outside of their discipline, in addition to required technical skills. A collaborative multi-disciplinary service learning project referred to as Ed+gineering was implemented in a 100-level mechanical engineering course. In this collaboration, mechanical engineering students, primarily in the second semester of their freshman year or first semester of their second year, worked over the course of a semester with education students taking a foundations course to develop and deliver engineering lessons to fourth or fifth graders. Students in comparison engineering classes worked …

Scaffolding Student Success: Developing A Culturally Responsive Approach To Support Underrepresented Minorities In Engineering Undergraduate Research, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

In this research study, a scaffolding technique is implemented in undergraduate research to cultivate and enhance engineering related aptitudes and stimulate additional experience that will allow underrepresented minority students to fully engage in communication and leadership roles post-graduation. Developing and supporting the growth of underrepresented minorities as leaders who make significant innovative contributions to the global and interconnected scientific society requires awareness of contextual issues that shape their educational experiences and a commitment to enact on a framework that blends technical, communication, and leadership skills in undergraduate engineering education. In the context of this four year study, a total of …