Mechanical Engineering Commons^™

Experimental Evaluation And Simulation Of Torque Transmissibility Frequency Response Functions Of Vibration Isolators And Absorbers For Drivetrain Applications, Luke Jurmu

Dissertations, Master's Theses and Master's Reports

Four studies involving torsional vibration isolation performance of automotive drivetrain components, make up this dissertation. One study features a prototype planetary torsional vibration absorber, a unique device that targets low frequency torsion modes in automotive drivetrains. Two studies feature experiments on several torque converters, clutch locked and open, to validate models of the hardware. The last study details experiments on a centrifugal pendulum absorber in a torque converter, to characterize the viscous friction while submerged in automatic transmission fluid (ATF). The enclosed studies improve the state of the art of drivetrain vibration absorbers and isolators, by introducing a new vibration …

Viability Of A Proposed Transparent Fluid Model For Analog Metal Casting Filling Process, Andres Segura Irazoqui

Dissertations and Theses @ UNI

This research work was conducted to develop a proposed transparent fluid model to mimic dross formation and dispersion in metal castings during the mold filling process. The major cause for dross formation includes the air entrainment, surface turbulence, and bubbles, which create oxide films inside the molten metal. The oxide films are trapped inside the casting after solidification causing detrimental effects on the mechanical properties of the casting.

The objective of the investigation was to explore the feasibility using phenolic urethane as a transparent fluid material to investigate air entrainment mechanism. The experimentation consists of the following materials: the phenolic …

Theoretical Study Of Magnetic Particles In A Shear Flow Subjected To A Uniform Magnetic Field, Christopher A. Sobecki

Doctoral Dissertations

"Magnetic manipulation of non-spherical magnetic microparticles is important for applications in shape-based and magnetic-based separations such as waste management, disease diagnostics, drug delivery, and mining. Manipulations of magnetic microparticles also include chain formation to assemble compositions for electronics, drug loading designs, and magnetorheological fluids for smart armor, hydraulic brakes, and dampers. In microfluidic devices, separation-formation-effectiveness depends on the shape of the channel, the shear rate, and the magnetic field strength and direction.

Particle separation and chain formation involved highly complex and computational expense-demanding studies in microfluidic devices, magnetic fields, and particle- particle/wall interactions. This research took complex experimental studies and …

A Comparison Of Aerodynamic Models For Optimizing The Takeoff And Transition Of A Bi-Wing Tailsitter, Ryan Anderson, Jacob Willis, Jacob Johnson, Andrew Ning, Randal Beard

Faculty Publications

Electric vertical takeoff and landing (eVTOL) aircraft take advantage of distributed electric propulsion as well as aerodynamic lifting surfaces to take off vertically and perform long-duration flights. Complex aerodynamic interactions and a hard-to-predict transition maneuver from hover to wing-borne flight are one challenge in their development. To address this, we compare three different interaction models of varying fidelity for optimizing the transition trajectory of a biplane tailsitter. The first model accounts for simplified rotor-on-wing interactions using momentum theory, while the other two account for wing-on-wing interactions using a vortex lattice method and rotor-on-wing aerodynamic interactions using blade element momentum theory. …

Optimization Of Turbine Tilt In A Wind Farm, James Cutler, Andrew P.J. Stanley, Jared J. Thomas, Andrew Ning

Faculty Publications

Wind farm power production is significantly affected by upstream turbines creating wakes of slower wind speeds that overlap the rotor swept areas of downstream turbines. By optimizing the tilt angle of the turbines in a farm, wakes may be deflected away from downstream turbines, increasing the overall energy production. In this study, we optimized the tilt angle of turbines in a wind farm to maximize energy production. We used an analytic wake model modified for gradient-based optimization to consider wake deflection from tilt. We considered optimizing the tilt angle of each turbine assuming that it remained fixed for the lifetime …

Bibliometric Analysis Of Research Trends In Rice Straw/Husk Reinforced Polymer Composites, Deepak D Dr., Abhishek S. Madival, Anupkumar M. Bongale Dr.

Library Philosophy and Practice (e-journal)

Bibliometric research is statistical analysis of publications to identify the most influencing sources of research pertaining to a specific area of research. This paper presents an overview research on rice straw/husk (RS/RH) reinforced polymer composites by using the bibliometric indicators to establish the research framework and to identify the essential research. The relevant journals, authors, institutions and countries which have significantly contributed to research on RS/RH based composite is focused. The bibliometric data is generated through Scopus database. It is observed that the number of publications on characterization of RS/RH based composites are consistently increasing over the last few years …

A Bibliometric Analysis Of Ultrasonic Vibration Assisted Turning, Govind S. Ghule, Sudarshan Sanap Prof. Dr.

Library Philosophy and Practice (e-journal)

Ultrasonic vibration-assisted turning (UVAT) is a new crossover in machining techniques which uses high frequency, low amplitude sound waves which are further superimposed on the cutting tool in traditional turning. This innovative technology is being utilized over the decades due to its conspicuous influence contrasted with traditional approach particularly in turning of hard-to-machine materials. This present paper analyses the past explores in the arena of ultrasonic vibration-assisted turning, by a far-reaching bibliometric investigation. The analysis is carried out by scrutinizing the studies through Science Direct and Scopus database to select the peer-reviewed papers. The advanced research tools like the word …

Predictive Maintenance Of Bearing Machinery Using Simulation- A Bibliometric Study, Karan Gulati Mr., Keshav Basandrai Mr., Shubham Tiwari Mr., Pooja Kamat Prof., Satish Kumar Dr.

Library Philosophy and Practice (e-journal)

Modelling is a way of constructing a virtual representation of software and hardware that involves a real-world device. We will discover the behaviour of the system if the software elements of this model are guided by mathematical relationships. For testing conditions that may be difficult to replicate with hardware prototypes alone, modelling and simulation are particularly useful, especially in the early phase of the design process when hardware might not be available. Model-based approach in MATLAB-Simulink can be useful for predictive maintenance of machines as it can reduce unplanned downtimes and maintenance costs when industrial equipment breaks. Through this bibliometric …

Variational Inference For Morphological Modification To 3d Geometry : An Application To The Support Generation For Metal Additive Manufacturing, Mugdha Swanand Joshi

Masters Theses

"A key issue in metal additive manufacturing (AM) processes is the optimization of support geometry. Correct selection of support strategy can reduce build time, improve surface finish, reduce support removal time, and maximize build success. Strategies used to design support structure are time consuming and need skilled personnel. In this research we have deployed a deep generative model capable of making morphological modifications to the part. However, it is not similar to topology optimization where the aim is to reduce or eliminate support structure. The proposed model can make necessary changes to the part in order to transform it into …

Numerical Investigation Of The Earplug Contribution To The Low-Frequency Objective Occlusion Effect Induced By Bone-Conducted Stimulation, Kevin Carillo, Olivier Doutres, Franck Sgard

Études primaires

The use of earplugs is commonly associated with an increased perception of the bone-conducted part of one's own physiological noise. This phenomenon is referred to as occlusion effect and is most prominent at low frequencies. Several factors influence the occlusion effect, such as the ear anatomy; the bone-conducted stimulation; and the type of occlusion device and its fit, insertion depth, and material properties. The latter factor is of great interest to potentially reduce the occlusion effect of passive earplugs. This paper investigates the mechanism(s) of contribution of earplugs to the objective occlusion effect. A two-dimensional axi-symmetric finite element model of …

Simulation Of The Objective Occlusion Effect Induced By Bone-Conducted Stimulation Using A Three-Dimensional Finite-Element Model Of A Human Head, Huiyang Xu, Franck Sgard, Kévin Carillo, Éric Wagnac, Jacques De Guise

Études primaires

The occlusion effect (OE) refers to the phenomenon that more bone-conducted physiological sounds are transmitted into the earcanal when it is blocked and may cause discomfort on users of hearing protection devices. Models have been proposed to study the OE as they can help understand the physical mechanisms and can be used to evaluate the individual contribution on the OE of the factors that may affect it (i.e., occlusion device, ear anatomy, and stimulation). The existing finite element models developed to study the OE are limited by their truncated ear geometries. In order to progress in the understanding of the …

Assessing The Comfort Of Earplugs: Development And Validation Of The French Version Of The Coprod Questionnaire, Jonathan Terroir, Nellie Perrin, Pascal Wild, Olivier Doutres, Franck Sgard, Chantal Gauvin, Alessia Negrini

Études primaires

Earplugs are a common form of protection for workers exposed to hazardous noise levels. Their comfort directly impacts the effective protection by influencing their consistent and correct use. Nevertheless, comfort definition may vary according to the studies. Thus, a previous review of the literature has shown that to improve our understanding of perceived comfort and to reduce measurement variability, it is advisable to consider comfort through a multidimensional construct (physical, acoustical, functional and psychological). On this basis, the COPROD (COnfort des PROtections auDitives/COmfort of hearing PROtection Devices) questionnaire was developed. It is intended for people working in noisy environments. Nine …

Combined Puncture And Cutting Of Soft-Coated Fabrics By A Pointed Blade: Energy, Force, And Stress Failure Criteria, Ennouri Triki, Chantal Gauvin

Études primaires

Soft elastomer-coated fabrics are widely used in engineering and protective applications. Puncture cutting by sharp-tipped objects is one of the most common failure modes of protective gloves made of coated fabrics. In order to investigate the puncture-cutting process of soft elastomer-coated fabrics, we studied the mechanisms and mechanics of pointed-blade insertion into specimens cut out from four protective gloves. Experimental and analytical analyses showed that total energy and critical puncture-cutting force calculated analytically are both able to predict the puncture-cutting resistance of soft elastomer-coated fabrics measured experimentally. Total energy is obtained from the relationship between the puncture-cutting work and the …

Effect Of Hearing And Head Protection On The Localization Of Tonal And Broadband Reverse Alarms, Chantal Laroche, Christian Giguère, Véronique Vaillancourt, Claudia Marleau, Marie-France Cadieux, Karina Laprise-Girard, Emily Gula, Véronique Carroll, Manuelle Bibeau, Hugues Nélisse

Études primaires

Objective

This study explored the effects of hearing protection devices (HPDs) and head protection on the ability of normal-hearing individuals to localize reverse alarms in background noise.

Background

Among factors potentially contributing to accidents involving heavy vehicles, reverse alarms can be difficult to localize in space, leading to errors in identifying the source of danger. Previous studies have shown that traditional tonal alarms are more difficult to localize than broadband alarms. In addition, HPDs and safety helmets may further impair localization.

Method

Standing in the middle of an array of eight loudspeakers, participants with and without HPDs (passive and level-dependent) …

Fluid-Wall Interactions In Pseudopotential Lattice Boltzmann Models, Cheng Peng, Luis F. Ayala, Orlando M. Ayala

Engineering Technology Faculty Publications

Designing proper fluid-wall interaction forces to achieve proper wetting conditions is an important area of interest in pseudopotential lattice Boltzmann models. In this paper, we propose a modified fluid-wall interaction force that applies for pseudopotential models of both single-component fluids and partially miscible multicomponent fluids, such as hydrocarbon mixtures. A reliable correlation that predicts the resulting liquid contact angle on a flat solid surface is also proposed. This correlation works well over a wide variety of pseudopotential lattice Boltzmann models and thermodynamic conditions.

Mechanism For The Unfolding Of The Top7 Protein In Steered Molecular Dynamics Simulations As Revealed By Mutual Information Analysis, Ognjen Perišić, Willy Wriggers

Mechanical & Aerospace Engineering Faculty Publications

We employed mutual information (MI) analysis to detect motions affecting the mechanical resistance of the human-engineered protein Top7. The results are based on the MI analysis of pair contact correlations measured in steered molecular dynamics (SMD) trajectories and their statistical dependence on global unfolding. This study is the first application of the MI analysis to SMD forced unfolding, and we furnish specific SMD recommendations for the utility of parameters and options in the TimeScapes package. The MI analysis provided a global overview of the effect of perturbation on the stability of the protein. We also employed a more conventional trajectory …