Mechanical Engineering Commons^™

Adaptive Kriging Method For Uncertainty Quantification Of The Photoelectron Sheath And Dust Levitation On The Lunar Surface, Xinpeng Wei, Jianxun Zhao, Xiaoming He, Zhen Hu, Xiaoping Du, Daoru Han

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper presents an adaptive Kriging based method to perform uncertainty quantification (UQ) of the photoelectron sheath and dust levitation on the lunar surface. The objective of this study is to identify the upper and lower bounds of the electric potential and that of dust levitation height, given the intervals of model parameters in the one-dimensional (1D) photoelectron sheath model. To improve the calculation efficiency, we employ the widely used adaptive Kriging method (AKM). A task-oriented learning function and a stopping criterion are developed to train the Kriging model and customize the AKM. Experiment analysis shows that the proposed AKM …

2021 (Spring) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the spring of 2021.

Robust Scandium Aluminum Nitride Mems Resonators For L Band Operation In Orbital Environments, Israel W. Dunk

Theses and Dissertations

This thesis investigates AlN alloyed with scandium in a variety of resonator architectures including WEM, overtone WEM, LEM, and SAW that have the potential to achieve high levels of electrical performance and environmental robustness. SAW resonators operating near 370 MHz are fabricated on polycrystalline Sc_.37Al_.63N, and AlN with the resulting devices compared and conclusions drawn as to the merits of each material. The design and fabrication of SAW devices is discussed in detail, with the operating characteristics of these resonators then tested both electrically and mechanically. Mechanical characterisation includes analysis of vibration and shock effects on …

Thermal Ignition Of A Combustible Over An Inclined Hot Plate, Salaika Parvin, Nepal Chandra Roy, Rama S. R. Gorla

Faculty Publications

In this study, the ignition characteristics and the flow properties of the mixed convection flow are presented. Detailed formulations of the forced, natural and mixed convection problems have been discussed. In order to avoid inconvenient switch between the forced and natural convection we introduce a continuous transformation in the mixed convection. We make a comparison between these situations which reveal a good agreement. For mixed convection flow, the ignition distance is explicitly expressed as a function of the Prandtl number, reaction parameter and wall temperature. It has been observed that owing to the increase of the aforesaid parameters, the thermal …

Geophysical Observations Of Taliks Below Drained Lake Basins On The Arctic Coastal Plain Of Alaska, R. C. Rangel, A. D. Parsekian, L. M. Farquharson, B. M. Jones, N. Ohara, A. L. Creighton, B. V. Gaglioti, M. Kanevskiy, A. L. Breen, H. Bergstedt, V. E. Romanovsky, K. M. Hinkel

Michigan Tech Publications, Part 1

Lakes and drained lake basins (DLBs) together cover up to ∼80% of the western Arctic Coastal Plain of Alaska. The formation and drainage of lakes in this continuous permafrost region drive spatial and temporal landscape dynamics. Postdrainage processes including vegetation succession and permafrost aggradation have implications for hydrology, carbon cycling, and landscape evolution. Here, we used surface nuclear magnetic resonance (NMR) and transient electromagnetic (TEM) measurements in conjunction with thermal modeling to investigate permafrost aggradation beneath eight DLBs on the western Arctic Coastal Plain of Alaska. We also surveyed two primary surface sites that served as nonlake affected control sites. …

Wind Blade Manufacturing For The Cal Poly Wind Power Club, Benjamin E. Thompson, Jake R. Lund, Claudia C. Angeles

Mechanical Engineering

The Cal Poly Wind Power Club is entering the 2021 Collegiate Wind Competition (CWC) in June. Last year, three senior project teams were assigned to collaborate and assist the club with the pitching mechanism, the rotor balancing, and the manufacturing process. As the manufacturing team, the goal of our project was to design a manufacturing process for the bladegeometry given. The manufacturing process was required to meet the team’s expectations and CWC’s performance requirements to place highly in the competition taking place in June 2021.These expectations included creating a manufacturing process that is repeatable and reliable for future competitions. The …

Tunable Cspb(Br/Cl)3 Perovskite Nanocrystals And Further Advancement In Designing Light Emitting Fiber Membranes, Sk Shamim Hasan Abir, Santosh K. Gupta, A. Ibrahim, Bhupendra B. Srivastava, Karen Lozano

Mechanical Engineering Faculty Publications

Cesium lead halide perovskite nanocrystals (NCs) have drawn a great deal of interest in optoelectronic and photonic applications due to their intrinsic and attractive photoluminescence properties. Though, their commercially viability is of concern due to their intrinsic instability. In this study, blue and green luminous PMMA-CsPbX3(X=Cl/Br) fibers were fabricated via forcespinning technique, where the polymer matrix encapsulated the NCs. Blue CsPbX3 NCs (b- CPX NCs) were synthesized at ambient conditions while blue to green CsPbX3 NCs (g-CPX NCs) fine color tuning was obtained after heat treatment at 150°C.Field emission scanning electron microscopy (FESEM) shows fibers with diameters in the single …

On Road Coordinates For Autonomous Vehicle Guidance, Ricardo Jacome

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

A new roadmap framework is proposed to improve the guidance and trajectory prediction capabilities of connected and automated vehicles (CAVs). Independent of road shape determination through external sensors, the system serves as a backup for challenging conditions, such as low sensor visibility and adverse environmental effects (e.g., rain, fog, snow). Based on the fusion of vehicle dynamics principles, differential geometry, and road design standards, the roadmap framework provides a consolidated collection of critical reference points of roadway centerlines and information about the shape of the roadway in the vicinity of a vehicle, including curvature, optimal travel velocity, and road alignment …

Condition Monitoring And Fault Detection Of Blade Damage In Small Wind Turbines Using Time-Series And Frequency Analyses, Luke H. Costello

Master's Theses

Condition monitoring systems are critical for autonomous detection of damage when operating remote wind turbines. These systems continually monitor the turbine’s operating parameters and detect damage before the turbine fails. Although common in utility-scale turbines, these systems are mostly undeveloped in distributed, small-scale turbines due to their high cost and need for specialized equipment. The Cal Poly Wind Power Research Center is developing a low-cost, modular solution known as the LifeLine system. The previous version contained monitoring equipment, but lacked decision-making capabilities.

The present work builds on the LifeLine by developing software-based detection of blade damage. Detection is done by …

Development Of Novel Hardware And Software For Wind Turbine Condition Monitoring, Ryan A. Zhan

Master's Theses

With the increased use of wind turbines as sources of energy, maintenance of these devices becomes more and more important. Utility scale wind turbines can be time consuming and expensive to repair so an intelligent method of monitoring these devices is important. Commercial solutions for condition monitoring exist but are expensive and can be difficult to implement. In this project a novel condition monitoring system is developed. The priority of this system, dubbed the LifeLine, is to provide reliable condition monitoring through an easy-to-install and low-cost system. This system utilizes a microcontroller to collect acceleration data to detect imbalances on …

Experimental Investigation Of The Effects Of Acoustic Waves On Natural Convection Heat Transfer From A Horizontal Cylinder In Air, Katherina V. Prodanov

Master's Theses

Heat transfer is a critical part of engineering design, from the cooling of rocket engines to the thermal management of the increasingly dense packaging of electronic circuits. Even for the most fundamental modes of heat transfer, a topic of research is devoted to finding novel ways to improve it. In recent decades, investigators experimented with the idea of exposing systems to acoustic waves with the hope of enhancing thermal transfer at the surface of a body. Ultrasound has been applied with some success to systems undergoing nucleate boiling and in single-phase forced and free convection heat transfer in water. However, …

Ram Air-Turbine Of Minimum Drag, Raymond Akagi

Master's Theses

The primary motivation for this work was to predict the conditions that would yield minimum drag for a small Ram-Air Turbine used to provide a specified power requirement for a small flight test instrument called the Boundary Layer Data System. Actuator Disk Theory was used to provide an analytical model for this work.

Classic Actuator Disk Theory (CADT) or Froude’s Momentum Theory was initially established for quasi-one-dimensional flows and inviscid fluids to predict the power output, drag, and efficiency of energy-extracting devices as a function of wake and freestream velocities using the laws of Conservations of Mass, Momentum, and Energy. …

Chilling And Heat Accumulation Of Fruit And Nut Trees And Flower Bud Vulnerability To Early Spring Low Temperatures In New Mexico: Meteorological Approach, Koffi Djaman, Komlan Koudahe, Murali Darapuneni, Suat Irkmak

Department of Mechanical and Materials Engineering: Faculty Publications

Fruit and nut trees production is an important activity across the southwest United States and this production is greatly impacted by the local climate. Temperature is the main environmental factor influencing the growth and the productivity of the fruit and nut trees as it affects the trees’ physiology and the vulnerability of flower bud, flowers, and young fruit and nut to the low temperatures or spring frost. The objective of the present study is to estimate the chilling and heat accumulation of fruit and nut trees across New Mexico. Three study sites as Fabian Garcia, Los Lunas, and Farmington were …

Local And Systemic In Vivo Responses To Osseointegrative Titanium Nanotube Surfaces, Erin A. Baker, Mackenzie M. Fleischer, Alexander D. Vara, Meagan R. Salisbury, Kevin C. Baker, Paul T. Fortin, Craig R. Friedrich

Michigan Tech Publications, Part 1

Orthopedic implants requiring osseointegration are often surface modified; however, implants may shed these coatings and generate wear debris leading to complications. Titanium nanotubes (TiNT), a new surface treatment, may promote osseointegration. In this study, in vitro (rat marrow-derived bone marrow cell attachment and morphology) and in vivo (rat model of intramedullary fixation) experiments characterized local and systemic responses of two TiNT surface morphologies, aligned and trabecular, via animal and remote organ weight, metal ion, hematologic, and nondecalcified histologic analyses. In vitro experiments showed total adherent cells on trabecular and aligned TiNT surfaces were greater than control at 30 min and …

Deployment And Control Of Adaptive Building Facades For Energy Generation, Thermal Insulation, Ventilation And Daylighting: A Review, Hani Alkhatib, Philippe Lemarchand, Brian Norton, Dominic O'Sullivan

Articles

A major objective in the design and operation of buildings is to maintain occupant comfort without incurring significant energy use. Particularly in narrower-plan buildings, the thermophysical properties and behaviour of their façades are often an important determinant of internal conditions. Building facades have been, and are being, developed to adapt their heat and mass transfer characteristics to changes in weather conditions, number of occupants and occupant’s requirements and preferences. Both the wall and window elements of a facade can be engineered to (i) harness solar energy for photovoltaic electricity generation, heating, inducing ventilation and daylighting (ii) provide varying levels of …

Development Of Multifunctional Materials Based On Poly(Ether Ether Ketone) With Improved Biological Performances For Dental Applications, Vanessa Montaño-Machado, Pascale Chevallier, Linda Bonilla-Gameros, Francesco Copes, Chiara Quarta, José De Jesús Kú-Herrera, Florentino Soriano, Victoria Padilla-Gainza, Graciela Morales, Diego Mantovani

Mechanical Engineering Faculty Publications

The main target for the future of materials in dentistry aims to develop dental implants that will have optimal integration with the surrounding tissues, while preventing or avoiding bacterial infections. In this project, poly(ether ether ketone) (PEEK), known for its suitable biocompa-tibility and mechanical properties for dental applications, was loaded with 1, 3, and 5 wt.% ZnO nanoparticles to provide antibacterial properties and improve interaction with cells. Sample cha-racterization by X-ray diffraction (XRD), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) as well as mechanical properties showed the presence of the nanoparticles and their effect in PEEK matrices, preserving their …

A Feedback-Based Pneumatic Compression System For Effective Lymphedema Management, Mohammad Imrul Kayes

LSU Master's Theses

Bioimpedance analysis (BIA) is a method of detecting lymphedema- a debilitating medical condition involving swelling of the extremities. Pneumatic compression devices are frequently used in the compression treatment of lymphedema. Although existing compression technology provides relief of symptoms, it has limitations in terms of ease-of-use, portability, and monitoring of treatment progress. Currently, there are no BIA analyzers in the market that run on a low-power microcontroller and a rechargeable battery. Moreover, no such device currently exists that integrate the BIA analysis with pneumatic compression system to offer a feedback-based solution for lymphedema treatment. This work represents the first steps towards …

Scale Model Test To Estimate Thermal Damage By Fire In Aircraft Cargo, Jian Gao, Tsuneyoshi Matsuoka, Yuji Nakamura

Progress in Scale Modeling, an International Journal

The Federal Aviation Administration (FAA) requires fire detectors to alarm within one minute of the start of a fire in cargo compartments of airplanes. To determine whether such alarm timing works, investigations of the thermal damage to ceilings and other structures during the early stage of a fire were accomplished to demonstrate compliance with these FAA regulations. The objective was to test the feasibility of predicting convective heat transfer in early stage of a cargo compartment fire by conducting reduced scale (lab scale) experiments. First, the scaling laws was derived and validated. Then, full-scale and half-scale experiments were performed with …

Extinguishment Of Diffusion Flames Formed Over A Porous Plate Burner Using Rubber Balloons Filled With Inert Gases, Hiroyuki Torikai, Shinya Kudo

Progress in Scale Modeling, an International Journal

We have proposed an inert gas, rubber-balloon extinguishing method which might increase the effectiveness of extinguishing flames and decreasing the amounts of agents needed for fire suppression. Hence, extinguishing experiments have been performed to further clarify possible extinguishing characteristics, mechanisms and scaling effects of this method. Carbon dioxide, nitrogen, argon and helium gases were used as the extinguishing agents. Methane-air and propane-air diffusion flames were formed on two different diameter, round porous plate burner and used as the targets for extinguishment. The extinguishing probabilities were measured, and the extinguishing processes were observed with a high-speed camera. As a result, an …

Fuel Cell Having Corrugated Membrane Electrode Assembly, Jonghyun Park

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An electrochemical reaction cell comprising an anode electrode, a cathode electrode, and a membrane electrode assembly (MEA). The MEA is positioned between the anode electrode and the cathode electrode. The anode electrode, the cathode electrode, and the MEA each have a corrugated shape and are contained within a recess of a housing.

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• Graduate Student Lands Position as Race Engineer

Effects Of Dimensionless Numbers On Decomposition Of Methane Hydrate, Shoma Shimizu, Genichiro Kushida

Progress in Scale Modeling, an International Journal

It is necessary to elucidate the decomposition and combustion of methane hydrate for fire safety during transportation and storage to utilize it for commercial practice. The amount of methane evolved during the decomposition of methane hydrates is affected by the conditions such as the initial temperature, initial density and ambient temperature. In the present study, the internal temperature of methane hydrate and the amount of methane evolved during its decomposition were investigated by a dimensionless numerical analysis using a transient one-dimensional conduction model from a symmetrical methane hydrate ball heated by ambient air. The numerically calculated central temperature and the …

Fingering Behavior Of Flame Spread Over Solid Combustibles, Tsuneyoshi Matsuoka, Kentaro Nakashima, Takuma Kajimoto, Akihiro Yoshimasa, Yuji Nakamura

Progress in Scale Modeling, an International Journal

In this study, the fingering pattern formation and the following flamelet spreading over three different kinds of thick combustibles, i.e., Poly methacrylate (PMMA), Poly ethylene (PE) and Poly carbonate (PC) were observed and the effective Lewis number correlation was validated. Experiments were performed with a narrow channel apparatus. In addition to the kinds of solid fuel materials, the channel height and the oxidizer velocity were varied as experimental parameters. An image analysis method was developed to quantify the number, diameter and spread rate of the flamelets. Replacing the fuel thickness into the thermal thickness, the effective Lewis number which is …

Improving Vertical Axis Wind Turbine (Vawt) Performance With Placement Strategies: Final Report, Patrick A. Tebbe, Nazli A. Yilmaz Wodzinski, Namyong Lee

Mechanical and Civil Engineering Department Publications

This project was focused on the use and placement of vertical axis wind turbines (VAWTs). Studies were focused on areas not typically addressed in previous work; small wind at very low elevations (i.e. within the boundary layer). Numerical studies were made of how VAWTs function as well as the potential wind environments they may be placed in. A simplified numerical code, based on two-dimensional potential flow functions, was developed to model flow around buildings and other structures. The code allows a rapid determination of regions where flow may experience speed-up and where turbulence may result.

Experimental facilities were designed and …

State Consistence Of Data-Driven Reduced Order Models For Parametric Aeroelastic Analysis, William C. Krolick, Jung I. Shu, Yi Wang, Kapil Pant

Faculty Publications

This paper investigates the state consistence of parametric data-driven reduced order models (ROMs) in a state-space form obtained by various system identification methods, including autoregressive exogenous (ARX) and subspace identification (N4SID), for aeroelastic analysis in varying flight conditions. The target flight envelop is first partitioned into discrete grid points, on each of which an aerodynamic ROM is constructed using system identification to capture the dependence of the generalized aerodynamic force on the generalized displacement of structural modes. High-fidelity aeroelastic modal perturbation simulations are used to generate the ROM training and verification data. Aerodynamic ROMs not on the grid point are …

Defect Detection In Freight Railcar Tapered-Roller Bearings Using Vibration Techniques, Constantine Tarawneh, Joseph Montalvo, Brent Wilson

Mechanical Engineering Faculty Publications

Currently, there are two types of defect detection systems used to monitor the health of freight railcar bearings in service: wayside hot-box detection systems and trackside acoustic detection systems. These systems have proven to be inefficient in accurately determining bearing health, especially in the early stages of defect development. To that end, a prototype onboard bearing condition monitoring system has been developed and validated through extensive laboratory testing and a designated field test in 2015 at the Transportation Technology Center, Inc. in Pueblo, CO. The devised system can accurately and reliably characterize the health of bearings based on developed vibration …

Characterization Of The Strain-Rate–Dependent Mechanical Response Of Single Cell–Cell Junctions, Amir Monemian Esfahani, Jordan Rosenbohm, Bahareh Tajvidi Safa, Nickolay V. Lavrik, Grayson Minnick, Quan Zhou, Fang Kong, Xiaowei Jin, Eunju Kim, Ying Liu, Yongfeng Lu, Jung Yul Lim, James K. Wahl Iii, Ming Dao, Changjin Huang, Ruiguo Yang

Department of Mechanical and Materials Engineering: Faculty Publications

Cell–cell adhesions are often subjected to mechanical strains of different rates and magnitudes in normal tissue function. However, the rate-dependent mechanical behavior of individual cell– cell adhesions has not been fully characterized due to the lack of proper experimental techniques and therefore remains elusive. This is particularly true under large strain conditions, which may potentially lead to cell–cell adhesion dissociation and ultimately tissue fracture. In this study, we designed and fabricated a single-cell adhesion micro tensile tester (SCAμTT) using twophoton polymerization and performed displacement-controlled tensile tests of individual pairs of adherent epithelial cells with a mature cell–cell adhesion. Straining the …

Kinematic And Kinetic Changes After Total Hip Arthroplasty During Sit-To-Stand Transfers: Systematic Review, Junsig Wang, Safeer F. Siddicky, Michael P. Dohm, C. Lowry Barnes, Erin M. Mannen

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Background: Total hip arthroplasty (THA) is a common and effective surgical procedure that allows patients with hip osteoarthritis to restore functional ability and relieve pain. Sit-to-stand transfers are common demanding tasks during activities of daily living and are performed more than 50 times per day. The purpose of this systematic review is to obtain a comprehensive understanding of biomechanical changes during sit-to-stand transfers after THA.

Methods: Relevant articles were selected through MEDLINE, Scopus, Embase, and Web of Science. Articles were included if they met the following inclusion criteria: 1) participants underwent total hip arthroplasty without restriction on the arthroplasty design, …

Resilient Florida Buildings: Alternative Fuel Options For Maintaining Power During Outages, Brochure, Florida Solar Energy Center, Colleen Mccann Kettles

FSEC Energy Research Center®

Electricity outages impact buildings as well as the fueling infrastructure that delivers energy resources for power generation and transportation. A fueling infrastructure with minimal downtime during power outages is needed to increase the resiliency of buildings and the economy. This brochure describes alternative fuels to consider for a buildings resiliency plan. This material is based upon work supported by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE) under the Energy Technology Development Program Award Number DE-EE0008880. FSEC Art#: BLDG-89 Updated: 05/20/2021

Discrete Element Modeling Of Hydrogel Extrusion, Rohit Boddu

Theses and Dissertations

Hydrogels are widely used in extrusion bioprinting as bioinks. Understanding how the hydrogel microstructure affects the bioprinting process aids researchers in predicting the behavior of biological components. Current experimental tools are unable to measure internal forces and microstructure variations during the bioprinting process. In this work, discrete element modeling was used to study the internal interactions and the elastic deformation of the molecular chains within hydrogel networks during the extrusion process. Two-dimensional models of hydrogel extrusions were created in Particle Flow Code (PFC; Itasca Co., Minneapolis, MN). For our model's calibration, hydrogel compression testing was used in which a cluster …