Mechanical Engineering Commons^™

Assessment Of The Impact Of Climate Change On Hydrological Processes In The Chirchik River Basin, Kh.Sh. Gafforov, Sh.D. Sh.D.Tursunboev

Irrigation and Melioration

The importance of assessing past and future climate differences plays an important role in future planning in relation to climate change. This situation requires urgent and concerted action in several areas: technology, infrastructure, politics, economics, and the environment. The article evaluates the impact of changes in precipitation intensity on the water level in the global circulation model (GCM) RCP 4.5 and 8.5 scenarios in the 2030s, 2050s, and 2070s. This study is a useful reference for improving water resource management and ensuring the sustainability of agricultural products in the future, as well as for improving operational water management and agricultural …

Assessment Of The Impact Of Climate Change On Hydrological Processes In The Chirchik River Basin, В.K. Saliev

Irrigation and Melioration

The article examines the assessment of the state and problems of irrigation water use in the republic in the past and in the near future. A comparative analysis of the state of water resources use for the period of the last 30 years from 1989 to 2019 was carried out.According to the estimates, own water withdrawal for 5 years (2014/15-2018/19) shows that an average of 53.2 m3, including 50.5 billion m3 from rivers At present (2018-2019), an average of 57.06 billion m3 of water is taken for irrigation of 4.289 million hectares of land, against 63.02 billion m3 approved in …

Environmental Damage Caused By Transport Equipment Waste, M. Radkevich, K. Shipilova, M. Abdukodirova, O. Pochugevski

Irrigation and Melioration

The article suggests a new approach to the monetary assessment of the damage caused to the environment by the processed waste of the transport sector. The proposed assessment method is based on the waste collection factor, all types of irretrievable losses and the volume of necessary compensatory release of materials. Based on a survey among vehicle owners, it was found that the solid waste collection rate is about 50 %, while the waste collection rate for operating fluids does not exceed 32 %. In this regard, the bulk of the damage to the environment is caused by liquid waste. Calculations …

Research Of Stress-Deformed State Of Multi-Connected Complex Shell Structures, Т.М. Маvlanov, Sh.O. Khudainazarov, B. Yalgashev, O.S. Nurova

Irrigation and Melioration

Conducting numerical experiments for complex structurally inhomogeneous structures allows us to understand the qualitative picture of the effect of various parameters in a wide range of studies and to give sound recommendations at the design stage for conducting laboratory model and field experiments. In this paper, on the basis of the classical theory of elasticity, the basic equations characterizing the stress-strain state of complex multiply connected shell structures are given and a specific problem is solved. At the same time, some of the structural elements have viscoelastic properties. When solving the problem, the behavior of the structure for the n-th …

To The Determination Of The Critical Circuit Speed Of The Sharing Drum, Kh. Kh. Igamberdiev, A.B. Mukhitdinov

Irrigation and Melioration

The article is devoted to the theoretical definition of the critical circumferential speed of the stripping drum of a kena harvester, which depends on the drum diameter, diameter and weight of the stems. It was determined from the equality of the change in the momentum of the stem during impact, i.e. from a shock impulse acting on the stem. The shock impulse is determined when the drum blade touches the stem in the process of stripping, which acts on the mass of the entire stem. The duration of the impact of the drum stripping on the stem was determined from …

An Innovative Seeder For Sowing Non-Loose Seeds Of Saxaul And Cherkez, E.T. Farmonov

Irrigation and Melioration

The main reasons for the absence of a seeder for mechanized sowing of non-loose seeds of fodder plants in deserts are analyzed in the article. The author has developed a technology for sowing non-loose seeds (saxaul and cherkez), which prevents clogging, crushing and breakage in the seeder hopper, and provides for uniform and stable sowing at a set rate and shallow depth over the entire field area without reducing the biological germination. An innovative seeder with a universal sowing unit is recommended. Field tests of the innovative seeder with the proposed universal sowing unit were conducted in February 2020, as …

Recommendations For The Analysis And Safety Assessment Of Turbid Sediments In Flood Reservoirs, А. Yangiev, Sh. Panjiev, D. Adjimuradov

Irrigation and Melioration

The article presents the results of field research conducted in Langar, Dehkanabad, Shurabsoy flood reservoirs in the Kashkadarya region.There are many problems as a result of floods in the reservoirs, there are disturbances in the discharge and drainage facilities during the passage of accidental floods.At the same time, there was a large accumulation of turbid-sediments in flood reservoirs.In the article, the results of the calculations using empirical formulas for predicting the amount of turbid sediments in Langar, Dehkanabad, Shurabsoy flood reservoirs up to 2025-2030 years are also presented, and it is noted that at present their useless volumes are full …

Justification Of Parameters Of Replaceable Working Parts Of A Combined Machine, А.A. Akhmetov, L.B. Muratov

Irrigation and Melioration

In article are described the design and options for completing the replaceable working parts of the combined machine for continuous tillage which of the formation of ridges and ridges for sowing re-crops. The parameters of the ridge former and apron-leveler of this machine have been substantiated. The rational values of the parameters of the comb-former are: length 600 mm, width of the entrance edge 680 mm, height of the blade 160 mm, length of the side edge of the blade 178 mm. The rational values of the working length and height of the leveling apron are 220 mm and 200 …

Development Of An Algorithm For Optimization Of Continuous Technological Process Of Cultivation Of Microorganisms, Sh.R. Rakhmanov

Irrigation and Melioration

In article the analysis of possible modes of microalgae cultivation has been carried out. Two optimization algorithms are substantiated. The first one is based on the method of random search with an absolute bias, an algorithm for optimizing the process of cultivating microorganisms with continuous regeneration of the flow in one cultivator. The second is an algorithm for determining the optimal residence time of chlorella particles in multistage cultivators, focused on the method of dynamic programming, implemented in Wellman's recurrence relation. The developed algorithm for operational forecasting and automatic control of the chlorella cultivation process allows, under given production conditions …

Covid-19 Impact To Family Food Consumption And Income In Uzbekistan: Results Of An Online Survey, Kh. Pardaev, Sh. Hasanov, S. Mamasoliev, Sh. Muratov, R. Kalandarov, U. Nurullaev

Irrigation and Melioration

This article aims to study the impact of the pandemic on food consumption by families in Uzbekistan. The shock of the pandemic is threatening the well-being of families in Uzbekistan, as in all developing countries. The study focuses on the effects of changes in food prices, declining consumption, and changes in household incomes. The Instrumental regression model was used in the factor impact analysis. Data for analysis were collected online by messenger groups from families in urban and rural areas of Uzbekistan. Results of the Econometric analysis demonstrated that the decline in food consumption in households was assessed by a …

Status Of Crop Diversification And Its Empirical Analysis: A Case Study Of The Republic Of Uzbekistan, A.E. Primov

Irrigation and Melioration

The main objective of this study is to determine the status and level of crop diversification among farms in the country through an empirical analysis using panel data collected in 2009-2017. In doing so, we performed the Stata-16 software using the Simpson Diversification Index model in determining the diversification index. According to the results, the highest diversification indicators were found for Samarkand, Fergana and Tashkent regions, respectively, and accounted for 0.74, 0.74 and 0.76, respectively. It can be seen that the existing farms in Tashkent region used more diversified crops than in other regions of the country. The average diversification …

Efficiency Of Using Graphic Software In The Design Of Hydrotechnical Structures, U.A. Nasritdinova, A.M. Khodjaev, Z.I. Kayumova

Irrigation and Melioration

The article examines the work of scientists engaged in research in this area in the design of hydrotechnic structures. The possibilities of design programs for the application of the results of scientific research in the educational process were used. Thanks to the design in these programs, practical tasks are carried out with the utmost precision. The use of computer technology in teaching the subject "Hydrotechnical structures" and the use of graphic software AutoCAD in the design of linear platforms for clothing, curved platforms for clothing from hydrotechnical structures are shown in 2D and 3D three-dimensional modeling.

Étude De L’Applicabilité De Haut-Parleurs Paramétriques Au Développement De Nouveaux Concepts D’Alarmes De Recul, Olivier Robin, Alain Berry, Hugues Nélisse

Rapports de recherche scientifique

L’utilisation d’alarmes de recul est obligatoire sur une majorité de véhicules lourds et reste un moyen largement utilisé pour prévenir et alerter les personnes œuvrant à proximité de ces véhicules. Des études antérieures, réalisées par l’IRSST, ont montré les limites d’efficacité des alarmes utilisées en milieu de travail pour minimiser le risque à la sécurité des travailleurs. De plus, les alarmes de recul, par le son de niveau élevé et très typé qu’elles produisent, sont régulièrement une source de nuisance importante pour les travailleurs, et aussi pour les riverains. Ces problèmes de gêne et de perception sonore pour les travailleurs …

Thermoelectric Generation And Thermophysical Properties Of Metal Oxide Nanofluids, Xinran Hou, Rong-Tsu Wang, Shaowen Huang, Jung-Chang Wang

Journal of Marine Science and Technology–Taiwan

This study describes the comprehensive characterization of the diverse water-based nanofluids involving aluminum oxide, titanium dioxide, and zinc oxide nanoparticles, which were prepared through the two-step synthesis method assisted by a microemulsion ultrasound skill with effects of both weight-percent concentration (wt.%) in the range of 1.0% and 5.0% and between 20 ^oC and 40 ⁰C. The mean cluster size, zeta potential, pH value, viscosity, thermal conductivity, absorbance, light absorption, and electrical charge density of the various nanofluids were surveyed by relative experiments. The results showed that the 2 wt.% Al₂O₃, 2 wt.% TiO_{2 …}

Wireless Sensor Network-Based Monitoring Of Bridge Pile Foundations For Detecting Scouring Depth, Han-Tang Huang, H. Ping Tserng, Ruei-Yu Hou, Mirosław Skibniewski

Journal of Marine Science and Technology–Taiwan

Climate change brings about unprecedented increases in the occurrence of storms and flooding. In response to increased risk of bridge pier scouring, there is a need for increased safety monitoring of bridges. This paper presents a wireless sensor network (WSN) - based solution developed to measure micro-vibrations of a bridge pier. Test measurement values are converted with the use of the Fast Fourier Transform (FFT) method to obtain natural frequencies. Scouring depth of the pier is estimated with the use of a Finite Element Method model. WSN is used to collect the signal and to test data transmission stability in …

A New Fuzzy Dea Model For Solving The Mcdm Problems In Supplier Selection, Chi-Mao Tsai, Hsuan-Shih Lee, Guo-Ya Gan

Journal of Marine Science and Technology–Taiwan

Supplier selection is a crucial task in supply chain management, and good supply chain management is essential to a company's ability to develop sustainably and gain the trust and satisfaction of its customers. In modern supply chain management, supplier selection often takes the form of a multi-criteria decision-making (MCDM) problem. Thus, to solve this problem, this study formulated a novel fuzzy MCDM model, which is based on the fuzzy data envelopment analysis model. This novel approach can transform the linguistic variables of assessment criteria into well-founded quantitative data for calculation. Moreover, our approach can effectively discriminate between decision-making units (both …

Evaluation Of The Human Discomfort Caused By Ship Vibrations, Laurentiu Picu, Eugen Rusu

Journal of Marine Science and Technology–Taiwan

The present work analyzes the subjective responses of people exposed to transient vibrations caused by systems with a single degree of freedom. In this context, the main objective of the research was to identify the main effect of vibrations on people's well-being at work (in particular on vessels crew) and to discover those frequencies that lead to the greatest discomfort. In order to achieve this goal, 12 laboratory experiments were carried out involving ten male subjects in good health, aged between 28 and 42. The variables of the vibratory system considered are: acceleration (4.8 ÷ 8.6 m/s¡2), amplitude (1 ÷ …

Application Of Physically Based Semi-Distributed Hec-Hms Model For Flow Simulation In Tributary Catchments Of Kaohsiung Area Taiwan, Fiaz Hussain, Ray-Shyan Wu, Kai-Chun Yu

Journal of Marine Science and Technology–Taiwan

Hydrologic modeling is a commonly used tool to understand the rainfallerunoff processes of gauged and ungauged catchments for proper quantitative estimation of water resources availability. In the present study, an attempt is made to simulate surface runoff using a physically based semi-distributed hydrological (HEC-HMS) model for four local-scale tributary catchments of Kaohsiung area Taiwan. The input physical parameters of the model were calculated and preprocessed in HEC-GeoHMS based on digital elevation model (DEM), land use, soil and hydro-meteorological data. The model performance was satisfactory with Nash Sutcliffe Efficiency (NSE) ¼ 0.51 to 0.86 and the coefficient of determination (R2) ¼ …

Evaluating Key Factors Of Container Shipping Lines From The Perspective Of High-Tech Industry Shippers, Chien-Lung Hsu, Tien-Chun Ho

Journal of Marine Science and Technology–Taiwan

Because of the changes in customers' needs and demands created by the development of container transport in the 1960s, the global container transport business has become increasingly competitive. With the high-tech industry ranged with one of the few competitive industries in Taiwan from 2002, container shipping lines have been forced to implement innovative operating patterns to meet the evolving demands of the high-tech industry shippers. This study conducts a survey questionnaire of domestic high-tech industry shippers to explore the different factors affecting their selection of container shipping lines, evaluating the key influencing factors by maritime marketing's 4C framework: customer needs, …

Beach Topography Surveying Using Unmanned Aerial Vehicle Photogrammetry Technology, Hui-Ming Fang, Kuan-Tsung Chang, Sung-Shan Hsiao, Shih-Peng Chiang

Journal of Marine Science and Technology–Taiwan

The mechanisms of in situ topography changes must be identified for spatial planning in coastal areas. In this study, the authors used in situ direct measurement methods and indirect remote-sensing technologies to develop a method for beach topography surveillance. Unmanned aerial vehicles (UAVs) have advantages of high portability and mobility and low operating altitude. Therefore, a UAV was equipped with a lightweight camera and a positioning system that comprised a global positioning system and an inertial measurement unit. Aerial photogrammetry and aerial triangu-lation methods were adopted for matching image feature points to obtain the corresponding topographic points in the sand. …

Research Of The Process Of Continuous Hydrogenation Of Benzene In The Presence Of Modified Catalysts, B Kedelbaev Dr. Professor, K Lakhanova Phd, G Iztleuov, Sadritdin Turabdzhanov Dr., Professor

Technical science and innovation

The technology has been developed for the production of unsaturated alloy nickel hydrogenation catalysts. The results of the study of the phase, chemical compositions and structure of nickel alloys and catalysts showed that the ferroalloy introduction as a modifying additive affects the NiAl₃ / Ni₂Al₃ ratio. The studied alloying metals are practically insoluble in alkali and exist in the catalyst in dissolved states. All these changes favorably affect the catalytic properties of modified nickel catalysts in the benzene hydrogenation reaction. A systematic study of the stationary catalyst activity with addition of ferroalloys in the continuous catalytic …

Research Results For The Selection Of Working Body Types For Strip Tillage Of Soil, F Alimova, B Primkulov, A Tolibaev, M Gulamov

Technical science and innovation

The article describes the results of research on the selection of working body types for strip tillage of soil. Information on the advantages of the technology of minimal soil tillage (Strip-Till) is presented. The data obtained as a result of experimental studies to determine soil moisture and hardness, as well as the quality of soil tilling by the recommended working bodies, are presented. The arrangement schemes of working bodies for the considered technology have been drawn up. The general concept of the development of a combined aggregate on energy-resource-water-saving technologies for the cultivation of crops in permanent furrows and in …

Special Aspects Of Fuel Saving Of Agricultural Equipment And Its Environmental Influence On Oil, Ramzjon Hamroyev Assistant, Amirku Irgashev Dr. Professor, Yuriy Kuznetsov Dr. Academic

Technical science and innovation

The national economy of the country uses various machines and mechanisms, the vast majority of which are road transport, operated in various sectors of the Republic. Due to the fact that they operate in the severe operating conditions associated with off-road and high dusty environment, there is an intensive lubricant contamination of transmission units. This article studies the rates of fuel consumption when using agricultural machinery, such parameters as fuel and lubricant efficiency, flammability, motor ability of agricultural machinery, speed. In addition, the article presents the results of bench tests to determine the quantitative and qualitative indicators of abrasive particles …

Efficiency Of A Helio Heating Collector, Azamat Usenov, Shaxnoza Sultanova Phd, Jasur Safarov Dr., Professor, Tojiniso Rahmanova

Technical science and innovation

A study of several industrial heat demand identified several industries with favourable conditions for the use of solar energy, the most important industrial processes using heat at moderate temperatures are: sterilization, pasteurization, drying, hydrolysis, distillation and evaporation, rinsing and cleaning and polymerization. The study describes some important processes and the temperature range required for each of them.

In this paper, a model of a solar water-heated drying device for drying ginger (Zungiber) root and other medicinal plants has been developed and studied experimentally. Using the model, the useful energy and temperature coming from the solar collector were analysed. The graphs …

Modulation Of Mechanical Stress Mitigates Anti-Dsg3 Antibody-Induced Dissociation Of Cell–Cell Adhesion, Xiaowei Jin, Jordan Rosenbohm, Eunju Kim, Amir Monemian Monemianesfahani, Kristina Seiffert-Sinha, James K. Wahl Iii, Jung Yul Lim, Animesh A. Sinha, Ruiguo Yang

Department of Mechanical and Materials Engineering: Faculty Publications

It is becoming increasingly clear that mechanical stress in adhesive junctions plays a significant role in dictating the fate of cell–cell attachment under physiological conditions. Targeted disruption of cell–cell junctions leads to multiple pathological conditions, among them the life-threatening autoimmune blistering disease pemphigus vulgaris (PV). The dissociation of cell–cell junctions by autoantibodies is the hallmark of PV, however, the detailed mechanisms that result in tissue destruction remain unclear. Thus far, research and therapy in PV have focused primarily on immune mechanisms upstream of autoantibody binding, while the biophysical aspects of the cell– cell dissociation process leading to acantholysis are less …

Modulation Of Mechanical Stress Mitigates Anti-Dsg3 Antibody-Induced Dissociation Of Cell–Cell Adhesion, Xiaowei Jin, Jordan Rosenbohm, Eunju Kim, Amir Monemian Esfahani, Kristina Seiffert-Sinha, James K. Wahl Iii, Jung Yul Lim, Animesh A. Sinha, Ruiguo Yang

Department of Mechanical and Materials Engineering: Faculty Publications

It is becoming increasingly clear that mechanical stress in adhesive junctions plays a significant role in dictating the fate of cell–cell attachment under physiological conditions. Targeted disruption of cell–cell junctions leads to multiple pathological conditions, among them the life-threatening autoimmune blistering disease pemphigus vulgaris (PV). The dissociation of cell–cell junctions by autoantibodies is the hallmark of PV, however, the detailed mechanisms that result in tissue destruction remain unclear. Thus far, research and therapy in PV have focused primarily on immune mechanisms upstream of autoantibody binding, while the biophysical aspects of the cell– cell dissociation process leading to acantholysis are less …

Solid State Synthesis And Characterization Of Apatite Based Ceramic Waste Form For The Immobilization Of Radioactive Iodine, Md Imdadul Islam

LSU Doctoral Dissertations

The growing demand for nuclear power in the United States and worldwide is accountable for addressing the major concern of radioactive waste, involving the technical challenges of maintaining the nuclear fuel cycle and immobilizing high-level wastes for safe disposal in geological storage. The appropriate selection of waste forms for spent nuclear fuel such as fission products and radionuclides can be effective means for a feasible and sustainable nuclear fuel cycle. But highly volatile radionuclides such as iodine (129) are of specific concern due to its extraordinary long half-life (15.7 million years). Due to its poor solubility and high volatility at …

Teaching Engineering Virtually: A Rapid Response To Address The Academic Challenges Generated By Covid-19, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

In this study, an alternative pedagogical model was established to address the academic challenges posed when undergraduate engineering students in a private university in Texas were mandated to seek off-campus housing due to the outbreak of COVI-19. As a result of the rapid transition to remote instruction, traditional and effective pedagogical methods implemented for in-person instruction had to be modified to overcome challenges such as the lack of academic resources, established campus practices that promote effective learning (e.g., study groups), and time-zone differences. Additionally, the instructional format had to be adjusted to ensure that the academic development of the students …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• Graduate Student to Present at Posters on the Hill

Foot Contact Dynamics And Fall Risk Among Children Diagnosed With Idiopathic Toe Walking, Rahul Soangra, Michael Shiraishi, Richard Beuttler, Michelle Gwerder, Lou Anne Boyd, Venkatesan Muthukumar, Mohamed Trabia, Afshin Aminian, Marybeth Grant-Beuttler

Electrical & Computer Engineering Faculty Research

Children that are diagnosed with Idiopathic Toe walking (cITW) are characterized by persistent toe-to-toe contacts. The objective of this study was to explore whether typical foot contact dynamics during walking predisposes cITW to a higher risk of falling. Twenty cITW and age-matched controls performed typical and toe walking trials. The gait parameters related to foot contact dynamics, vertical force impulses during stance, slip, and trip risk were compared for both groups. We found that cITW manifest less stable gait and produced significantly higher force impulses during push-off. Additionally, we found that cITW had a higher slip-initiation risk that was associated …