Mechanical Engineering Commons^™

Field Induced Assembly Of Particulate Systems, Kinnari Shah

Dissertations

The primary focus of the first part of this dissertation is to study the AC field-driven assembly of monodisperse silica and glass particles on liquid - liquid interface and forming a liquid film of uniform thickness having arrangement of particles on it. This liquid film with arrangement of regular particles can be converted into a solid film by curing top UV curable liquid. Here, electric field is used as a tool to facilitate AC field-driven assembly. The work describes the assembly of different size of regular particles and effective development of solid film.

It is also shown that particles of …

Computer-Aided Design, Gary Benenson

Open Educational Resources

No abstract provided.

Vlsj Members Fall 2017, Vlsj Lab, Mechanical Engineering Department, Georgia Southern University

VLSJ Lab: Members (Archived)

No abstract provided.

Process Management And Design Layout Of High Throughput Screening, Anthony Vasquez, Kyle Dupuy

Industrial and Manufacturing Engineering

Calibr is a pharmaceutical company in San Diego and growing very quickly rate and need help redesigning their lab layout and in doing so reducing their cycle times and down times in machines. In addition to this, they do not currently have an accurate measurement of how long their processes take in an overall cycle. The objective of this project is to provide Calibr with a redesigned layout to accommodate new equipment as well as a software tool that can output Gantt charts for their planning of their testing. Our approach to this project first included mapping out the facilities …

Performance Analysis Of Constant Speed Local Abstacle Avoidance Controller Using A Mpc Algorithym On Granular Terrain, Nicholas Haraus

Master's Theses (2009 -)

A Model Predictive Control (MPC) LIDAR-based constant speed local obstacle avoidance algorithm has been implemented on rigid terrain and granular terrain in Chrono to examine the robustness of this control method. Provided LIDAR data as well as a target location, a vehicle can route itself around obstacles as it encounters them and arrive at an end goal via an optimal route. This research is one important step towards eventual implementation of autonomous vehicles capable of navigating on all terrains. Using Chrono, a multibody physics API, this controller has been tested on a complex multibody physics HMMWV model representing the plant …

Construction And Characterization Of A Single Stage Dual Diaphragm Gas Gun, Nathaniel Steven Helminiak

Master's Theses (2009 -)

In the interest of studying the propagation of shock waves, this work sets out to design, construct, and characterize a pneumatic accelerator that performs high-velocity flyer plate impact tests. A single stage gas gun with a dual diaphragm breach allows for a non-volatile, reliable experimental testing platform for shock phenomena. This remotely operated gas gun utilizes compressed nitrogen to launch projectiles down a 14 foot long, 2 inch diameter bore barrel, which subsequently impacts a target material of interest. A dual diaphragm firing mechanism allows the 4.5 liter breech to reach a total pressure differential of 10ksi before accelerating projectiles …

The Effects Of A Reduced Force Aerial Bucket Control On Upper Extremity Muscular Demands As Assessed With Surface Electromyography, Casey D. Garces

Master's Theses (2009 -)

A common control for operating aerial bucket trucks for utility companies in North America is called a pistol grip control. Based upon many anecdotal reports of forearm muscle fatigue from workers using this control, Prof. Richard Marklin began an EPRI-sponsored study in 2016 using EMG to determine muscle fatigue of workers while they used the pistol grip. Muscle activity recorded by EMG is a measure of the magnitude of muscle force under controlled conditions. This study confirmed the reports of muscle fatigue in extensor digitorum communis (EDC) muscle in the right forearm. The next phase of the study was to …

Design Of A Passive Ankle Prosthesis With Energy Return That Increases With Increasing Walking Velocity, Alexander J. Folz

Master's Theses (2009 -)

Patients who undergo a transtibial (below the knee) amputation are often met with a difficult decision: selection of a prosthesis. Limitations of currently available prostheses motivate work on a new solution, the EaSY Walk, a passive device that mimics two key aspects of the natural ankle: non-linear rotational stiffness through implementation of a stiffening flexure mechanism and rotational work output that varies as a function of walking velocity to propel the user forward. To achieve the latter, a strategy to convert the maximum available translational energy acquired from deflection along the leg into rotational energy about the ankle joint through …

Considering Manufacturing In The Design Of Thick-Panel Origami Mechanisms, Erica Brunson Crampton

Theses and Dissertations

Origami has been investigated and demonstrated for engineering applications in recent years. Many techniques for accommodating the thickness of most engineering materials have been developed. In this work, tables comparing performance and manufacturing characteristics are presented. These tables can serve as useful design tools for engineers when selecting an appropriate thickness-accommodation technique for their application. The use of bent sheet metal for panels in thick-origami mechanisms shows promise as a panel design approach that mitigates several trade-offs between performance and manufacturing characteristics. A process is described and demonstrated that can be employed to use sheet metal in designs of origami-adapted …

Computational Methods For Nonlinear Systems Analysis With Applications In Mathematics And Engineering, Geoffrey Kenneth Rose

Mechanical & Aerospace Engineering Theses & Dissertations

An investigation into current methods and new approaches for solving systems of nonlinear equations was performed. Nontraditional methods for implementing arc-length type solvers were developed in search of a more robust capability for solving general systems of nonlinear algebraic equations. Processes for construction of parameterized curves representing the many possible solutions to systems of equations versus finding single or point solutions were established. A procedure based on these methods was then developed to identify static equilibrium states for solutions to multi-body-dynamic systems. This methodology provided for a pictorial of the overall solution to a given system, which demonstrated the possibility …

Vulnerability Assessment Of Critical Bridges In The Hampton Roads Region Of Virginia To Storm Surge Flooding Under Sea Level Rise, Luca Castrucci

Civil & Environmental Engineering Theses & Dissertations

In this thesis, a hydrodynamic model was developed to study the vulnerability of the transportation infrastructure in the Hampton Roads region of Virginia to storm surge flooding under sea level rise. The Hampton Roads region is the second most affected area by relative sea level rise in the United States. The hydrodynamic model was validated for tide prediction, and its performance in storm surge simulation was validated with data from Hurricane Irene (2011). The developed model was then applied to eight flood-prone bridges in the transportation network that connect the cities of Norfolk, Hampton, Virginia Beach, Chesapeake and Portsmouth; the …

Development Of A Data Acquisition System For Unmanned Aerial Vehicle (Uav) System Identification, Donald Joseph Lear

Mechanical & Aerospace Engineering Theses & Dissertations

Aircraft system identification techniques are developed for fixed wing Unmanned Aerial Vehicles (UAV). The use of a designed flight experiment with measured system inputs/outputs can be used to derive aircraft stability derivatives. This project set out to develop a methodology to support an experiment to model pitch damping in the longitudinal short-period mode of a UAV. A Central Composite Response Surface Design was formed using angle of attack and power levels as factors to test for the pitching moment coefficient response induced by a multistep pitching maneuver.

Selecting a high-quality data acquisition platform was critical to the success of the …

Using Optimality Theory And Reference Points To Improve The Diversity And Convergence Of A Fuzzy-Adaptive Multi-Objective Particle Swarm Optimizer, Amit A. Kulkarni

Mechanical & Aerospace Engineering Theses & Dissertations

Particle Swarm Optimization (PSO) has received increasing attention from the evolutionary optimization research community in the last twenty years. PSO is a metaheuristic approach based on collective intelligence obtained by emulating the swarming behavior of bees. A number of multi-objective variants of the original PSO algorithm that extend its applicability to optimization problems with conflicting objectives have also been developed; these multi-objective PSO (MOPSO) algorithms demonstrate comparable performance to other state-of-the-art metaheuristics. The existence of multiple optimal solutions (Pareto-optimal set) in optimization problems with conflicting objectives is not the only challenge posed to an optimizer, as the latter needs to …

2017 (Fall) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the fall of 2017.

Hip Joint Function In People With Femoroacetabular Impingement Syndrome, Philip Malloy

Dissertations (1934 -)

Femoroacetabular impingement syndrome (FAIS) is a clinical hip disorder that represents symptomatic contact between the proximal femur and rim of the acetabulum during normal hip range of motion. FAIS has been described as a precursor to hip joint osteoarthritis (OA), and results in physical impairments and functional limitations in young individuals and active adults. Despite tremendous growth in arthroscopic hip surgery for FAIS, little is known about how this disorder affects dynamic hip joint function. The purpose of this dissertation was to investigate hip joint function, during clinical and functional activities, both before and after arthroscopic hip surgery for FAIS. …

Torrefaction Kinetics Of Hemp Hurds, An Emerging Agricultural Byproduct, In A Small Retort, Tel Jensen

Civil and Environmental Engineering Undergraduate Honors Theses

As knowledge concerning the consequences of unsustainable energy sources and agricultural practices grows, development of low-impact alternatives to both becomes more important. Sustainable sources of biomass offer solutions to both problems. This study characterized the reaction kinetics of torrefying an agricultural byproduct, the woody interior of hemp stems, or hurds. Torrefaction was carried out at 250 °C in small and simple retorts made of galvanized steel pipe. A first-order model most closely approximated the reaction. A sensitivity analysis was performed and the data was adjusted to correct for three potential sources of error, and regressed to find the best fit …

Shear Joy Of Watching Paint Dry, Randy Craig Hurd, Nathan B. Spiers, J. Belden, Zhao Pan, B. Lovett, W. G. Robinson, M. A. Zamora, Saberul I. Sharker, Mohammad M. Mansoor, A. Merritt, Tadd T. Truscott

Mechanical and Aerospace Engineering Faculty Publications

This paper is associated with a video winner of a 2016 APS/DFD Milton van Dyke Award for work presented at the DFD Gallery of Fluid Motion.

Orientation Dependent Compression Behavior Of Co35Ni35Al30 Single Crystals, Peizhen Li, Haluk E. Karaca, Yury I. Chumlyakov

Mechanical Engineering Faculty Publications

The shape memory effect (SME) and superelasticity (SE) behavior of homogenized Co₃₅Ni₃₅Al₃₀ single crystals were systematically characterized along the [100], [110] and [111] orientations under compression. The shape memory behavior of CoNiAl was found to be highly orientation and stress/temperature dependent. Maximum compressive recoverable strains were 3.98 % in [110], 3 % in [100] and 0.30 % in [111] orientations, respectively. The Co₃₅Ni₃₅Al₃₀ demonstrated a very high superelastic temperature window of more than 350 °C along the [100] and [110] orientations. Moreover, two-way shape memory effect with very low thermal …

Polar Exploration (University Focus) Research Into Smart Materials Continues At The University Of Dublin With The Development Of Methods To Record And Present Data To Demonstrate The Magnetorheological Effect When A Magnetic Field Is Applied To A Mr Elastomer Sample, Dave Gorman, Niall Murphy, Ray Ekins

Conference Papers

Research into methods to record and present data to demonstrate the Magnetorheological effect when a magnetic field is applied to a Magnetorheological Elastomer sample. By Dave Gorman, Niall Murphy and Ray Ekins, Technological University Dublin, Republic of Ireland A Magnetorheological Elastomer (MRE) is an example of a smart material as it undergoes a change in its physical properties when in the presece of an external magnetic field. This change in properties is known as the Magnetorheological (MR) effect and the manner in which it is achieved and reported, is of critical importance to the future development of MRE-based components. To …

Material Characterization Of Intermetallic Compound Formation With Respect To Thermosonic Bonding Duration, Mahin Khan

Mechanical Engineering Master's Theses

Intermetallic Metallic Compounds (IMCs) formation is a common cause for wire bond failures. This research studied the effect of US vibration duration on IMC formation and growth in Copper-Aluminum (Cu-Al) wire bonded samples. Wire bonded samples, using 2.5 mil (63.5 μm) thick Palladium coated Copper wire, is ultrasonically bonded on a 2 cm thick Aluminum (1”x1”) coupon. Segmented bonding technique using 200 gf force and 220 gf force are applied during segment 1 and segment 2 of the bonding respectively. Ultrasonic (US) vibration frequency of 115-117 khz and a bonding temperature of 175°C is used. A pair of 5 samples …

Self-Propulsion Of Leidenfrost Drops Between Non-Parallel Structures, Cheng Luo, Manjarik Mrinal, Xiang Wang

Mechanical and Aerospace Faculty Publications - Archive

In this work, we explored self-propulsion of a Leidenfrost drop between non-parallel structures. A theoretical model was first developed to determine conditions for liquid drops to start moving away from the corner of two non-parallel plates. These conditions were then simplified for the case of a Leidenfrost drop. Furthermore, ejection speeds and travel distances of Leidenfrost drops were derived using a scaling law. Subsequently, the theoretical models were validated by experiments. Finally, three new devices have been developed to manipulate Leidenfrost drops in different ways.

Rarefication Effects On Jet Impingement Loads, Shiying Cai, Chunpei Cai, Kai Zhang, Jun Li

Michigan Tech Publications, Part 1

Rarefication effects on jet impingement loads are studied by comparing recent new formulas at the collisionless flow limit and numerical simulations. The jet exit size is finite, and can be either planar or round. In the simulations, the jets have different degrees of rarefication, with a Knudsen (Kn) number ranging from 0 to infinity; i.e., the jet flows can be continuum, collisional, or collisionless. The comparison results indicate that (1) the new surface load formulas are accurate at the collisionless flow limit; (2) in general, the formulas offer upper limits for the peak loads; (3) however, it is improper to …

Open Source 3-D Printed Nutating Mixer, Dhwani K. Trivedi, Joshua M. Pearce

Department of Materials Science and Engineering Publications

As the open source development of additive manufacturing has led to low-cost desktop three-dimensional (3-D) printing, a number of scientists throughout the world have begun to share digital designs of free and open source scientific hardware. Open source scientific hardware enables custom experimentation, laboratory control, rapid upgrading, transparent maintenance, and lower costs in general. To aid in this trend, this study describes the development, design, assembly, and operation of a 3-D printable open source desktop nutating mixer, which provides a fixed 20° platform tilt angle for a gentle three-dimensional (gyrating) agitation of chemical or biological samples (e.g., DNA or blood …

Measured Performance Of A High-Efficiency Solar-Assisted Heat Pump Water Heater, Florida Solar Energy Center, Carlos Colon

FSEC Energy Research Center®

This paper describes a novel solar photovoltaic-assisted heat pump water heater (PV-HPWH). The system uses two 310 Wp PV modules, micro-inverters and innovative controls to produce and store daily hot water. The system likely costs half that of solar thermal systems, with greater reliability, no freeze protection and potentially superior performance in cloudy locations. Moreover, no net metering is needed for the PV, which with two modules makes for a simple installation.The HPWH controls have been modified through experimentation such that higher tank temperatures are achieved during the day when solar availability is high while avoiding triggering the compressor during …

A Bayesian Estimation Model For Transient Engine Exhaust Characterization Using Fourier Transform Infrared Spectroscopy, David Wilson, Casey Allen

Mechanical Engineering Faculty Research and Publications

Comprehensive emissions models extensively use engine exhaust data from vehicle experiments to represent the relationship between fuel composition and pollutants. However, the predicted emissions from these models often neglect the effects of transients and speed-load history. Fourier transform infrared (FTIR) spectroscopy is a high frequency measurement technique capable of comprehensive speciation. However, due to long residence times of exhaust within a FTIR spectrometer gas cell, FTIR measurements are contaminated by the effects of historical emissions, precluding the attainment of time-resolved engine exhaust data. This work presents a Bayesian estimation model for processing FTIR measurements to obtain accurate estimations of instantaneous …

Evaluation Of Heat Available From Calcium Chloride Desiccant Hydration Reaction For Domestic Heating In San Francisco, Ca, Michael Giglio

Mechanical Engineering Master's Theses

Thermochemical energy storage has the potential to support the use of solar thermal energy collection in ways that traditional thermal energy storage, like sensible and latent heat storage, have fallen short. Thermochemical energy storage has been shown to have higher storage capacities than sensible and latent storage for dehumidifying applications and does not require insulation like sensible and latent heating do. Sensible heating is focused on maintaining an increased temperature of a storage medium while latent heat storage is focused on maintaining a phase of the storage material. Both sensible and latent heat storage have been shown to have lower …

Computerized Heat Transfer Modeling For Solar Powered Water Purification System, Houtan Neynavaee

Mechanical Engineering Master's Theses

Since drinkable water resources are limited, as the human population increases it is predicted that providing pure water is a future human challenge. However, a huge resource of the water exists on the earth surface in seas and oceans, which are not proper for drinking and cultivate. Exploiting of a solar powered water purification system is an economy and environment-friendly solution to this human problem.

In this thesis, we present computerized heat transfer model for solar powered water purification system. This Model can be used for calculating the heat transfer, system temperature, and other variable parameters such as boiler pressure, …

A Sustainable Approach For Tungsten Carbide Synthesis Using Renewable Biopolymers, Monsur Islam, Rodrigo Martinez-Duarte

Publications

Here we present a sustainable, environment-friendly and energy-efficient approach for synthesis of porous tungsten carbide (WC). A biopolymer-metal oxide composite featuring iota-carrageenan, chitin and tungsten trioxide (WO3) was used as the precursor material. The reaction mechanism for the synthesis of WC was estimated using the results from X-ray diffraction characterization (XRD). A synthesis temperature of 1300 °C and dwell time of 3 h were found to be the optimum process parameters to obtain WC>98% pure. The grain size, porosity and Brunauer–Emmett–Teller (BET) surface area of the synthesized WC were characterized using field emission scanning electron microscopy, high resolution transmission …

Direct Numerical Simulation Of Turbulent Katabatic Slope Flows With An Immersed-Boundary Method, Clancy Umphrey, Ray Deleon, Inanc Senocak

Mechanical and Biomedical Engineering Faculty Publications and Presentations

We investigate a Cartesian-mesh immersed-boundary formulation within an incompressible flow solver to simulate laminar and turbulent katabatic slope flows. As a proof-of-concept study, we consider four different immersed-boundary reconstruction schemes for imposing a Neumann-type boundary condition on the buoyancy field. Prandtl’s laminar solution is used to demonstrate the second-order accuracy of the numerical solutions globally. Direct numerical simulation of a turbulent katabatic flow is then performed to investigate the applicability of the proposed schemes in the turbulent regime by analyzing both first- and second-order statistics of turbulence. First-order statistics show that turbulent katabatic flow simulations are noticeably sensitive to the …

Spiraling Light With Magnetic Metamaterial Quarter-Wave Turbines, J. Zeng, T. S. Luk, Jie Gao, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.