Mechanical Engineering Commons^™

Nebraska Summary: S1122 Massey Ferguson 6715s, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Multi-Use Fireline Handtool, Bruce W. Bernard Jr

All Undergraduate Projects

A wildland firefighter is a valuable resource to protecting public lands and managing fuels. The many hand tools used by firefighters aid in their ability to complete any required tasks effectively. Several of the tools available are specially purposed for individually grubbing, scraping, or liming. A small squad of firefighters could become a more effective resource if the tools they carried could perform several of these purposes as one single tool. To improve the effectiveness of an individual on the fireline a multi-use hand tool was designed to include an axe for liming and a heavy duty scraper for grubbing …

Bike Lock Combining Strength And Flexibility, Zachary Uhrich

All Undergraduate Projects

What can be done when someone is riding a bicycle in a large metropolitan area, and when they reach their destination they find that there either is no bike rack, or the rack is already full. For bikers who prefer the security of a standard U-lock, this means having to leave to find another rack elsewhere or leave your bike unlocked. This situation is the why there is a need for a bike lock which can combine the security of a U-lock, with the flexibility and size of a chain. This project solves the problem by using a hardened steel …

Aging Assessment Of High Voltage Single Component Room Temperature Vulcanized Silicone Rubber (Rtv-1) Subjected To Aqueous Salt, Monika Bleszynski

Electronic Theses and Dissertations

Single component room temperature vulcanized (RTV-1) silicone based caulk used in high voltage insulators and other applications is frequently subjected to environmental pollutants. Aging of RTV-1 silicone rubber is the result of various stressors, including environmental aging conditions such as UV, acid, and salt exposure from ocean mist. Loss of hydrophobicity due to damage of the hydrophobic methyl groups, as well as loss of mechanical strength due to depolymerization via hydrolysis as a result of aqueous salt exposure were the two main factors of material aging assessed in this work. Multiple RTV-1 formulations were initially assessed for resistance to aging …

Properties Of Partially Stabilized Zirconia Components Fabricated By The Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin Mcmillen, Ming Leu, Gregory Hilmas, Jeremy Watts

Faculty Publications, Mechanical Engineering

The Ceramic On-Demand Extrusion (CODE) process is a novel additive manufacturing process for fabricating dense ceramic components from aqueous pastes of high solids loading. In this study, 3 mol% Y2O3 stabilized tetragonal zirconia polycrystal (3Y-TZP) parts were fabricated using the CODE process. The parts were then dried in a humidity controlled environmental chamber and sintered under atmospheric pressure. Mechanical properties of the sintered parts were examined using ASTM standard test techniques, including density, Young’s modulus, flexural strength, Weibull modulus, fracture toughness and Vickers hardness. The microstructure was analyzed, and grain size was measured using scanning electron microscopy. The results compared …

Asme Mini Rc Baja: Drivetrain, Jason M. Moore

All Undergraduate Projects

Title and author: ASME mini RC Baja Drivetrain by Jason Moore; partner Mike Cox. (Engineering Technologies, Safety, and Construction)

Abstract/Artists Statement: The issue that this project is concerned with is how to design and build a drivetrain, steering and suspension systems for an RC car. The systems must be simple and functional. Furthermore, these systems will be designed to fit on a small chassis and not interfere with each other. They also need to be strong and durable enough to propel the car forward and maneuver through various obstacles and be built in a way that is easy to take …

Truss Alignment Tool, Jason Hedin

All Undergraduate Projects

The purpose of this project is to follow the engineering process from start to finish, and create a fully functioning truss alignment tool that has been designed, constructed, and tested successfully. The first phase involves the design of the truss alignment tool. The main design requirements of the tool includes taking an input force of 60 pounds and outputting the 630 pounds of clamping force needed to realign a set of two stacked trusses and pull their bottom edges flush. The second phase involves the construction of the tool. This involves all machining processes associated with the cutting, shaping, and …

Paper Airplane Building Machine: Paper Airplane Launcher, Hassan A. Bujayli

All Undergraduate Projects

The project was motivated by an ASME 2016 design challenge. The challenge was to design and manufacture a device that would turn a single sheet of paper into a paper airplane and launch it. The project is divided into three portions. The three portions are the frame and paper loading, folding mechanism, and launching. The circumference equation is used, to determine what is the proper speed of the paper loading motor. Notably, a slow rpm motor is needed for the loading mechanism to prevent the paper from being damaged. To avoid any deflection in the frame, the total weight of …

Experimental Study Of The Flow Of Ferrofluid In A Porous Media Under A Magnetic Field, Muskaan Khurana

Dissertations, Master's Theses and Master's Reports

This research presents results from a laboratory-scale experimental setup that was designed to visualize the behavior of ferrofluid percolation through a porous media. Ferrofluids are colloidal suspensions made of magnetic particles of a few nanometers and stabilized in carrier liquids like water or mineral oil. Ferrofluids get magnetized and align themselves in the direction of a magnetic field when a field gradient is applied.

With the help of this experiment we investigate the viability of controlling fluid flow in porous medium by a magnetic field in vicinity. The experiments show that ferrofluids can be used as a transporting media to …

A Comprehensive Methodology For Design Of A Circulation Control Small-Scale Unmanned Aircraft, Konstantinos Kanistras

Electronic Theses and Dissertations

Unmanned Aerial Vehicles (UAVs) have become increasingly prevalent and important for a wide spectrum of civilian and military operations. When focusing on small-scale fixed-wing UAVs, payload, power and energy requirements limit considerably their utilization and flexibility allowing them to complete only those specific missions they are designed for. Circulation Control (CC) is an active flow control method used to produce increased lift over the traditional systems (flaps, slats, etc...) currently in use. This dissertation focuses on the foundations of a comprehensive methodology from design to implementation and experimental testing of Coanda-based Circulation Control Wings (CCW) for unmanned aircraft. The …

Sustainability: Reusing Data Center Waste Heat, John Boushra, Kyle Duncan, Aleksandr Kogan, Giang Pham

Capstone Design Expo Posters

Data Centers are facilities used to house a large number of computer systems and their associated components, such as telecommunications and data storage systems. Nowadays many organizations depend on the reliable operation of their data centers for their day to day business operations. Data centers are designed with redundant and backup power supplies, redundant data communications connections, robust cybersecurity protocols and very strict environmental controls. The many computer systems held in a typical data center generate large heat loads that need to be continuously removed with high grade air conditioning systems. Anthem currently owns a large corporate data center in …

Tracking Surgical Instruments, Akia Wells, Samuel Samvura, Brandon Santiago

Capstone Design Expo Posters

Surgical instruments and sponges are mistakenly left inside patients for more than a dozen times a day. Hospitalizations involving a lost instrument or sponge can average costing more than $60,000 for a hospital. The objective of this design project is to develop a simple, innovative tracking flow process that will better keep track of surgical instruments and sponges before and after surgeries. Using high temperature stickers with matrix barcode technology attached to the surgical instruments, the instruments will be easily scanned into a database to track when instruments are checked in and checked out. Before all instruments are used and …

Vehicle Level Transient Aircraft Thermal Management Modeling And Simulation, Adam Donovan

Browse all Theses and Dissertations

Many advances in technology are expected to increase the capabilities of next generation aircraft, and these advances will increase the thermal load on the aircraft as well. In order to assess and account for these increased thermal loads, three studies were performed: a fuel pump trade study, a high energy pulsed system (HEPS) implementation study, and a legacy vehicle environmental control system (ECS) study. The fuel pump study addresses the effect of the implementation of a centrifugal fuel pump versus a variable displacement fuel pump. Traditionally, aircraft designers have used a centrifugal fuel pump over a piston based pump based …

Soap Bubble Clusters In Thin Enclosures, Said Shakerin

All Faculty Books and Book Chapters - School of Engineering and Computer Science

No abstract provided.

Nebraska Summary: S1063 Massey Ferguson 7718, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1102 New Holland T6.180, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1095 Case-Ih Maxxum 135, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1083 Case-Ih Puma 200, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Group Scheduling In A Cellular Manufacturing Shop To Minimise Total Tardiness And Nt: A Comparative Genetic Algorithm And Mathematical Modelling Approach, Gokhan Egilmez, Emre M. Mese, Bulent Erenay, Gürsel A. Süer

Mechanical and Industrial Engineering Faculty Publications

In this paper, family and job scheduling in a cellular manufacturing shop is addressed where jobs have individual due dates. The objectives are to minimise total tardiness and the number of tardy jobs. Family splitting among cells is allowed but job splitting is not. Two optimisation methods are employed in order to solve this problem, namely mathematical modelling (MM) and genetic algorithm (GA). The results showed that GA found the optimal solution for most of the problems with high frequency. Furthermore, the proposed GA is efficient compared to the MM especially for larger problems in terms of execution times. Other …

Galvanic Corrosion Of Aluminum/Carbon Composite Systems, Eva Håkansson

Electronic Theses and Dissertations

Aluminum/carbon composite systems can have outstanding mechanical properties. Aluminum and carbon fiber reinforced polymer matrix composites (CFRP) are typically considered corrosion resistant when used alone, but can develop severe galvanic corrosion when in physical contact in the same component or structure.

General engineering practice is to avoid contact between aluminum and CFRP in any application where moisture may be present, but it is still of great importance to understand the consequences if the two materials accidentally become in contact. There may also be applications where a low rate of galvanic corrosion is acceptable.

This dissertation contributes unique experimental and numerical …

A Novel Extrusion-Based Additive Manufacturing Process For Ceramic Parts, Amir Ghazanfari, Wenbin Li, Ming Leu, Gregory Hilmas

Faculty Publications, Mechanical Engineering

An extrusion-based additive manufacturing process, called the Ceramic On-Demand Extrusion (CODE) process, for producing three-dimensional ceramic components with near theoretical density is introduced in this paper. In this process, an aqueous paste of ceramic particles with a very low binder content (<1 vol%) is extruded through a moving nozzle at room temperature. After a layer is deposited, it is surrounded by oil (to a level just below the top surface of most recent layer) to preclude non-uniform evaporation from the sides. Infrared radiation is then used to partially, and uniformly, dry the just-deposited layer so that the yield stress of the paste increases and the part maintains its shape. The same procedure is repeated for every layer until part fabrication is completed. Several sample parts for various applications were produced using this process and their properties were obtained. The results indicate that the proposed method enables fabrication of large, dense ceramic parts with complex geometries.

Mechanical And Aerospace Engineering, 2015-2016, College Of Engineering And Applied Sciences

Mechanical and Aerospace Engineering News

• Letter from the Department Chair
• New Faculty
• Student Success
• University NanoSatellite Program P-Spec Mission
• WALI Student Opportunities
• Study of Blind Cane Vibration

Hybrid Metal Oxide Cycle Water Splitting, Richard B. Diver Jr, Robert D. Palumbo, Nathan P. Siegel, James E. Miller

Other Faculty Research and Publications

Hybrid thermochemical water splitting cycles are provided in which thermally reduced metal oxides particles are used to displace some but not all of the electrical requirements in a water splitting electrolytic cell. In these hybrid cycles, the thermal reduction temperature is significantly reduced compared to two-step metal-oxide thermochemical cycles in which only thermal energy is required to produce hydrogen from water. Also, unlike the conventional higher temperature cycles where the reduction step must be carried out under reduced oxygen pressure, the reduction step in the proposed hybrid cycles can be carried out in air, allowing for thermal input by a …

Test 2162a: New Holland T9.645, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1060a Massey Ferguson S7715s, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1072 Challenger Mt545e, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1114 John Deere 6195m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

A Conjugate Fluid-Porous Approach To Convective Heat And Mass Transfer With Application To Produce Drying, Furqan A. Khan, Anthony G. Straatman

Mechanical and Materials Engineering Publications

No abstract provided.

Closure Of The Macroscopic Turbulence And Non-Equilibrium Turbulent Heat And Mass Transfer Equations For Porous Media Composed Of Randomly Packed Spheres, Furqan A. Khan, Anthony G. Straatman

Mechanical and Materials Engineering Publications

No abstract provided.

A Conjugate Fluid-Porous Approach For Simulating Airflow In Realistic Geometric Representations Of The Human Respiratory System, Christopher Degroot Dr, Anthony G. Straatman

Mechanical and Materials Engineering Publications

No abstract provided.