Mechanical Engineering Commons^™

The Research, Design And Implementation Of A Remotely Operated Bioreactor With Incubation System For The Purpose Of A 3d Cell Line Growth, Steven Doyle, John Helms, Ryan Longchamps

Research Horizons Day Posters

No abstract provided.

Sailboat Disablement Project- Net Entanglement System, Christine Milton

Research Horizons Day Posters

No abstract provided.

Slip Length Crossover On A Graphene Surface, Zhi Liang, Pawel Keblinski

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Using Equilibrium and Non-Equilibrium Molecular Dynamics Simulations, We Study the Flow of Argon Fluid above the Critical Temperature in a Planar Nanochannel Delimited by Graphene Walls. We Observe that, as a Function of Pressure, the Slip Length First Decreases Due to the Decreasing Mean Free Path of Gas Molecules, Reaches the Minimum Value When the Pressure is Close to the Critical Pressure, and Then Increases with Further Increase in Pressure. We Demonstrate that the Slip Length Increase at High Pressures is Due to the Fact that the Viscosity of Fluid Increases Much Faster with Pressure Than the Friction Coefficient between …

Distributed Wireless Pzt Fiber Composite Sensor System Development And Demonstration, Ethan Hopping, Markus Murdy

Research Horizons Day Posters

No abstract provided.

Noise Control By Structure And Material, Brian Tarling

Thinking Matters Symposium Archive

An acoustic impedance testing tube is designed and constructed to test noise absorption properties of selected materials. The structure will be made to be convenient for demonstration purposes and real testing procedures while following ASTM E1050 standards as closely as possible. An engineering drawing as well as a 3D-­‐CAD model of the structure is developed. Testing is conducted on selected materials; mainly ones that will allow obtained results to be compared to results found by other parties. Various sounds will be generated using Mathematical programming; the types of sound will include single frequency, wide band and narrow band noises. Microphones …

Control Oriented Concentrating Solar Power (Csp) Plant Model And Its Applications, Qi Luo

Open Access Dissertations

Solar receivers in concentrating solar thermal power plants (CSP) undergo over 10,000 start-ups and shutdowns, and over 25,000 rapid rate of change in temperature on receivers due to cloud transients resulting in performance degradation and material fatigue in their expected lifetime of over 30 years. The research proposes to develop a three-level controller that uses multi-input-multi-output (MIMO) control technology to minimize the effect of these disturbances, improve plant performance, and extend plant life. The controller can be readily installed on any vendor supplied state-of-the-art control hardware.^ We propose a three-level controller architecture using multi-input-multi-output (MIMO) control for CSP plants that …

Electric Vehicle Sales For 2014 And Future Projections, Florida Solar Energy Center, David L. Block

FSEC Energy Research Center®

The object of this research is to assess the current status and to predict the future penetration of electric vehicles (EVs) within the U.S. market. The prediction method is based on EV yearly sales giving the cumulative vehicles on the road for 2010 through 2014 and the growth rates for these five years. Using these growth values, the future ten year values are calculated. The EV sales results for 2014 in the U.S. show that 118,773 vehicles were sold as compared to 96,700 vehicles in 2013. This gives a one year sales growth rate of 23%. The total cumulative number …

Bayesian Global Optimization Approach To The Oil Well Placement Problem With Quantified Uncertainties, Zengyi Dou

Open Access Theses

The oil well placement problem is vital part of secondary oil production. Since the calculation of the net present value (NPV) of an investment depends on the solution of expensive partial differential equations that require tremendous computational resources, traditional methods are doomed to fail. The problem becomes exceedingly more difficult when we take into account the uncertainties in the oil price as well as in the ground permeability. In this study, we formulate the oil well placement problem as a global optimization problem that depends on the output of a finite volume solver for the two-phase immiscible flow (water-oil). Then, …

Optimizing Electrode Thickness And Material For Laser-Induced Electrothermal Flow, Jian Wei Khor

Open Access Theses

In this article, the material dependence of electrothermal flow is studied to optimize an optoelectric particle manipulation technique called Rapid Electrokinetic Patterning (REP). REP utilizes a heat source to produce temperature gradients, which, in this study, are induced by the application of a 1064 nm cw laser. The simultaneous application of an uniform AC electric field assemble colloids on the surface of an electrode that can be moved by translating the laser. The temperature gradients produced from the heat source are crucial in REP as the higher the temperature gradient the faster the electrothermal flow. Thus, optimization of temperature gradients …

Smart V-Belt, Kyle J. Mosier

Open Access Theses

The purpose of this research was to develop a method for detecting premature failure in a v-belt using capacitance and resistance readings. Another goal of the research was to detect tension values on the belt using the same readings. Materials of current belts and possible materials for a prototype belt were tested. Materials were chosen, and prototype belts were built. Pulley system configurations were developed and built. Sections of the belt designs were tested for capacitance and resistance before and after various methods of damage. Capacitance was chosen as the better sensing method. Certain layered belt configurations and sheave configurations …

Delamination Of C/Pekk I-Beam Using Virtual Crack Closure Technique And Cohesive Zone Method, Greeshma Ramakrishna

Open Access Theses

A damage study is conducted on a carbon epoxy/PEKK (poly-ether-ketone-ketone) thermoplastic composite I-Beam, with a pre crack of 100 mm modeled between the top flange and the filler (butt joint between filler and web). This project is in collaboration with Fokker Aerostructures, Netherlands and is part of the Thermoplastic Primary Aircraft Structure innovation program (TAPAS). The C/PEKK I-Beam is modeled after a section of the Gulfstream G650 aircraft's centre beam, which was previously a carbon fiber/epoxy hat-stiffened skin construction. The objective of the thesis is to identify if the crack propagates in the I-Beam within the load range that act …

An Experimental Study On The Effects Of Blade Row Interactions On Aerodynamic Loss Mechanisms In A Multistage Compressor, Natalie Rochelle Smith

Open Access Dissertations

While the gas turbine engine has existed for nearly 80 years, much of the complex aerodynamics which governs compressor performance is still not well understood. The unsteady flow field consists of periodic blade row interactions from the wakes and potential fields of each blade and vane. Vane clocking is the relative circumferential indexing of adjacent vane rows with the same vane count, and it is one method to change blade row interactions. Though the potential of performance benefits with vane clocking is known, the driving flow physics have yet to be identified. ^ This research examines the effects of blade …

Investigating Solutions To Wind Washing Issues In Two-Story Florida Homes, Phase 2, Florida Solar Energy Center, Charles Withers, Jr.

FSEC Energy Research Center®

With U.S. Department of Energy goals of reducing existing home energy use by 30% and new home energy use by 50%, it is imperative to focus on several energy efficiency measures, including the quality of air and thermal barriers. This report provides results from a second-phase research study of a phenomenon generally referred to as wind washing. Wind washing is the movement of unconditioned air around or through building thermal barriers in such a way as to diminish or nullify the intended thermal performance. This study focused on the impact of poorly sealed and insulated floor cavities adjacent to attic …

Creep And Shrinkage Behavior Of Fly Ash Based Geopolymer Concrete, Md Rashedul Islam

Doctoral Dissertations

The manuscript presented herein is based on the investigation of the short and long term properties of fly ash based geopolymer concrete (GPC) and their link to fly ash characteristics. Fly ash (FA) exhibits a significantly different particle morphology, which impacts the mechanical properties of the resulting GPC and typically contains impurities that fluctuate from one FA source to another. A key contribution of this research work is the capturing of the variability posed by the FA stockpile with a wide range of physical, chemical, and crystallographic characteristics as a source material to select the GPC mix design. In the …

Electrochemical Fatigue Crack Treatment, Konstantin Dolgan

Doctoral Dissertations

Fatigue is responsible for at least 50% of all mechanical and 90% of all metallic failures. Fatigue cracks often start at stress concentrations, and without timely and appropriate remediation, tend to exhibit relatively fast propagation that leads to property damage and sometimes serious accidents.

The objective of this research was to develop a new method of fatigue crack treatment in steel structures and estimate its efficiency and limitations. The method was based on placing fatigue cracks under compression by depositing nickel onto the surfaces of the cracks. The proposed method was applied to ASTM E399 compact-tension specimens machined from ASTM …

Modeling On Single-Sided Wind-Driven Natural Ventilation, Haojie Wang

Open Access Dissertations

Buildings use 40% of the total primary energy in the United States, with a significant part of this energy being used for ventilation and cooling. Despite the large amount of energy used in buildings, reports have shown that the indoor air quality (IAQ) and thermal comfort are not satisfactory. The lowered productivity due to the bad IAQ could cause $125 billion loss per year and the sick building syndromes could cause $32 billion direct healthcare costs. Most of the problems related to IAQ are caused by insufficient fresh outdoor air supply or lack of maintenance with traditional mechanical ventilation systems. …

Development Of Analytical Sensitivity Analysis For Ahp Applications, Marie L. Ivanco

Mechanical & Aerospace Engineering Theses & Dissertations

Decision makers often face complex problems, which can seldom be addressed without the use of structured analytical models. Mathematical models have been developed over the last 50 years to streamline and facilitate decision making activities. The Analytic Hierarchy Process constitutes one of the most utilized Multi-Criteria Decision Analysis Methods. While AHP has been thoroughly researched and applied, the method still shows limitations in terms of integrating profile disparities of Subject Matter Experts (SMEs). This thesis develops an analytical sensitivity analysis method for AHP based on local partial derivatives to address these limitations. Four examples are presented to demonstrate and validate …

Design Of Timing Circuit For Fuel Injection Conversion And Development Of Laboratory To Analyze Engine Performance Using A Dynamometer, Aditi Jayram Limaye

Mechanical & Aerospace Engineering Theses & Dissertations

A fundamental facility was built to analyze some of the basic parameters involved in engine performance, namely torque and power output of the engine. One of the objectives was to convert a carbureted engine into a fuel injection or (Fl) engine. This was achieved by designing and creating a timing circuit that is required to trigger the electronic fuel injector or (EFI). The facility was designed around a dynamometer and a fuel delivery system; that provided a specialized tool to analyze engines and injectors.

The results from the carbureted experiments and the FI experiments were compared to the rated specifications …

Multi-Segment Foot Joint Kinematics With Varying Midfoot Orthotic Postings, Hilary F. Feskanin

Honors Theses

Foot orthoses are often prescribed to prevent and treat lower limb disorders. While the success of these devices is well documented, the mechanisms behind them are unclear. Due to methodological limitations, many studies have focused on the rearfoot. This is the first study to assess the effects of midfoot-targeted orthotic strategies on midfoot and rearfoot kinematics. Gait mechanics were recorded for 19 healthy females walking in four orthotic conditions: valgus midfoot post, varus midfoot post, heel lift and standard/control. The midtarsal and ankle joint 3D kinematics for the three experimental conditions were compared to the control condition. Variables of interest …

School-Books On Tape: The Tensile And Adhesive Strength Of Duct Tape In A College Backpack, Robin Elizabeth Ker

Honors Theses

Two categories were used to assess the strength of duct tape constructions: adhesive strength and tensile strength. Previously made duct tape backpacks frequently suffered from adhesive failure around shoulder straps. When a backpack is lifted, it experiences a force which is greater than the resting weight. The hypothesis states that there is an area of application between two pieces of duct tape such that they will behave as a uniform piece and experience tensile failure, that two sufficiently overlapped pieces can hold within 5% of the load carried by a single piece, and that there is a relationship between the …

Transient Cardiovascular Hemodynamics In A Patient-Specific Arterial System, Jr Rodward Hewlin

Dissertations

The ultimate goal of the present study is to aid in the development of tools to assist in the treatment of cardiovascular disease. Gaining an understanding of hemodynamic parameters for medical implants allow clinicians to have some patient-specific proposals for intervention planning. In the present study a full cardiovascular experimental phantom and digital phantom (CFD model) was fabricated to study: (1) the effects of local hemodynamics on global hemodynamics, (2) the effects of transition from bed-rest to upright position, and (3) transport of dye (drug delivery) in the arterial system. Computational three dimensional (3-D) models (designs A, B, and C) …

2015 (Spring) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the spring of 2015.

Group Decisions In Value Management, Christiono Utomo, Farida Murti, Arazi Idrus

Makara Journal of Technology

This research deals with a technique to expedite group decision making during the selection of technical solutions for value management process. Selection of a solution from a set of alternatives is facilitated by evaluating using multicriteria decision making techniques. During the process, every possible solution is rated on criteria of function and cost. Function deals more with quality than with quantity, and cost can be calculated based on the theoretical time value of money. Decision-making techniques based on satisfying games are applied to determine the relative function and cost of solutions and hence their relative value. The functions were determined …

A Mechanical Regenerative Brake And Launch Assist Using An Open Differential And Elastic Energy Storage, David H. Myszka, Andrew P. Murray, Kevin Giaier, Vijay Krishna Jayaprakash, Christoph Gillum

Mechanical and Aerospace Engineering Faculty Publications

Regenerative brake and launch assist (RBLA) systems are used to capture kinetic energy while a vehicle decelerates and subsequently use that stored energy to assist propulsion. Commercially available hybrid vehicles use generators, batteries and motors to electrically implement RBLA systems. Substantial increases in vehicle efficiency have been widely cited.

This paper presents the development of a mechanical RBLA that stores energy in an elastic medium. An open differential is coupled with a variable transmission to store and release energy to an axle that principally rotates in a single direction. The concept applies regenerative braking technology to conventional automobiles equipped with …

Victair Mistifier Gearbox: Shafts And Bearings, Rickey Skinner, Gabe Bruno, Casey Mcfarlen

Mechanical Engineering and Technology Senior Projects

The current global population is 7.2 billion. It is projected to increase by 1 billion over the next 12 years. There is only 5% of usable farming land left on earth. Food is a resource that humans must consume daily. These facts undeniably lead to a shortage of food in the future. It is essential to mankind survival that farming becomes more efficient and sustainable. This provided the motivation to design a more efficient transmission for the Victair Mistifier (orchard and vineyard sprayer). Victair Mistifiers are designed, engineered, and manufactured by H.F. Hauff Company in Yakima, WA. The Hauff Company’s …

Verification Of A Dual-State Extended Kalman Filter With Lidar-Enabled Autonomous Hazard-Detection For Planetary Landers, Peter Joseph Jorgensen

Master's Theses (2009 -)

This thesis presents a mathematical model for a LIDAR-enabled Terrain- and Hazard-Relative Navigation sensor and the design and implementation of a dual-state extended Kalman filter. The extended Kalman filter equations are presented in summary. Mathematical models for an altimeter, a velocimeter, a star tracker, and a lidar-enabled mapping/tracking sensor are presented in depth. An explanation of the software designed for computer simulation is included. It is proved through this analysis that, when implemented as part of a well-tuned extended Kalman Filter and in combination with other sensors, the proposed model for a lidar-enabled mapping/tracking sensor significantly reduces estimation error. This …

Solid Lubrication Bearing Design Through Analytical And Empirical Vibration Analysis Of Characteristic Frequencies, Christopher A. Schultz

Master's Theses (2009 -)

Ball bearings with solid lubrication lack the damping mechanisms of oil and produce well-defined vibration characteristics based upon given geometry and speed of operation. This work takes advantage of the high signal to noise ratio in x-ray bearings and develops an algorithm to statistically track bearing performance based upon fundamental bearing theory, Monte Carlo simulation, Order Analysis, and Weibull statistics. The technique gathers vibration data solely related to the theoretical operation of a bearing, negates the background noise, and provides descriptive vibration amplitude statistics of individual bearing components for evaluation. The practical implications of the thesis described herein allow the …

A Compliant Mechanism-Based Variable-Stiffness Joint, Jacob Marc Robinson

Theses and Dissertations

A review of current variable-stiffness actuators reveals a need for more simple, cost effective, and lightweight designs that can be easily incorporated into a variety of human-interactive robot platforms. This thesis considers the potential use of compliant mechanisms to improve the performance of variable-stiffness actuators. The advantages and disadvantages of various concepts using compliant mechanisms are outlined, along with ideas for further exploration. A new variable-stiffness actuator that uses a compliant flexure as the elastic element has been modeled, built, and tested. This new design involves a variable stiffness joint that makes use of a novel variable transmission. A prototype …

Isogeometric Analysis For Electromagnetism, Tahsin Khajah

Mechanical & Aerospace Engineering Theses & Dissertations

The combination of numerical analysis with the scanning technology has been seeing increased use in many research areas. There is an emerging need for high-fidelity geometric modeling and meshing for practical applications. The Isogeometric Analysis (IGA) is a comprehensive computational framework, which integrates geometric modeling and meshing with analysis. Different from other existing numerical methods, the IGA can generate analysis ready models without loss of geometrical accuracy. In IGA, the continuity and the quality of a solution can be conveniently controlled and refined. These features enable IGA to integrate modeling, analysis, and design in a unified framework, the root idea …

Validation Of Open Chain Model During Kinematic Analysis Of Joint Mobilization Of The Foot: An In Vitro Study, Anthony Ross Mcnally

Mechanical & Aerospace Engineering Theses & Dissertations

Joint mobilization techniques have been shown to improve dorsiflexion range of motion after ankle injury in multiple in vivo studies; however, the underlying arthrokinematic effects of this treatment still require clarification. Therefore, the purpose of this preliminary study was to determine the viability of an open kinetic chain in vitro model for applying Maitland Grade III anterior/posterior joint mobilizations to the talocrural joint while examining the osteokinematic and arthrokinematic changes at the talocrural, subtalar and hindfoot joints. Three fresh frozen cadaver lower legs had Maitland Grade III anterior-to-posterior joint mobilization applied to the talocrural joint in 2 sessions of 200 …