Mechanical Engineering Commons^™

Loss On Ignition Using Infrared Heating, Benjamin J. Binoniemi

Masters Theses

The focus of this study is a proof of concept that infrared heating can be used to produce a reliable and rapid method of performing the loss on ignition test. The loss on ignition test is a foundry industry standard test that requires all moisture and volatile organic compounds be vaporized from a sample of foundry sand. The standard test as recommended by the American Foundry Society uses a muffle oven and requires nearly four hours to perform. This new concept performs the same test in approximately ten minutes. The biggest issues with the loss on ignition test are time …

A Multi-Objective Optimization Method For Maximizing The Value Of System Evolvability Under Uncertainty, Jason Daniel Watson

Theses and Dissertations

System evolvability is vital to the longevity of large-scale complex engineered systems. The need for evolvability in complex systems is a result of their long service lives, rapid advances to their integrated technologies, unforeseen operating conditions, and emerging system requirements. In recent years, quantifiable metrics have been introduced for measuring the evolvability of complex systems based on the amount of excess capability in the system. These metrics have opened opportunities for optimization of systems with evolvability as an objective. However, there are several aspects of such an optimization that require further consideration. For example, there is a trade-off between the …

Computational Modeling Of Alternating Current Potential Drop Measurement For Crack Detection Of Multi-Functional Ceramic Coated Structures, Simha Sandeep Rao

All Theses

Non-destructive testing and evaluation (NDT&E) is a set of techniques commonly used to evaluate a material for the presence of any flaws without actually degrading the material itself. The Alternating Current Potential Drop (ACPD) test method is one of the NDT surface methods used to determine the electrically insulating defects beneath the surface by injection of currents in the structure and measurement of the resulting voltage difference between two or more points on the surface. The presence of defects generally increases the resistance of the structure and hence causes the drop of measured voltage. The inversion of this data can …

Burnout, No, And Flame Characterization From An Oxygen-Enriched Biomass Flame, Steven Andrew Owen

Theses and Dissertations

Concern for the environment and a need for more efficient energy generation have sparked a growing interest throughout the world in renewable fuels. In order to reduce emissions that negatively contribute to global warming, especially CO2, enormous efforts are being invested in technologies to reduce our impact on the environment. Biomass is an option that is considered CO2 friendly due to the consumption of CO2 upon growth. Co-firing biomass with coal offers economic advantages because of reduced capital costs as well as other positive impacts, such as NOx and SOx emission reductions. However, due to the large average particle size …

Active Control Of The Human Voice From A Sphere, Monty J. Anderson

Theses and Dissertations

This work investigates the application of active noise control (ANC) to speech. ANC has had success reducing tonal noise. In this work, that success was extended to noise that is not completely tonal but has some tonal elements such as speech. Limitations such as causality were established on the active control of human speech. An optimal configuration for control actuators was developed for a sphere using a genetic algorithm. The optimal error sensor location was found from exploring the nulls associated with the magnitude of the radiated pressure with reference to the primary pressure field. Both numerically predicted and experimentally …

Supersonic Retro-Propulsion Computational Fluid Dynamics Analysis Applied To Future Mars Mission, Margarita Nataly Brandt

Doctoral Dissertations and Master's Theses

Supersonic Retro-Propulsion is one of the most promising emerging technologies being considered by NASA for use in future Mars missions. This new form of Entry Descent Landing has the potential to help increase the allowable payload mass currently constraining many science instruments and operations. Computational Fluid Dynamics was used to show the feasibility of supersonic retro - propulsion in Mars atmospheric conditions. The results presented show the SRP will be able to perform satisfactory using the same conditions that the Curiosity Rover was exposed to during its landing sequence. The plume expansion was analyzed for various cases, moving from free …

Design And Manufacturing Of A Mecanum Wheel For The Magnetic Climbing Robot, Shruti Deepak Kamdar

Doctoral Dissertations and Master's Theses

An AndyMark Mecanum Wheel has been re-designed for better performance and utilization by Helical Robotics. Mecanum Wheel is a complex "Omni-Directional" wheel that currently contains several drawbacks. The drawbacks include design, usage of hobby grade material, bumps in rollers, etc. A comprehensive design of the Mecanum wheel is being presented using Computer Aid Software, CAD and analysis tools, such as Finite Element Analysis, FEA. The different concepts were hand sketched using various parameters and then implemented in a CAD software-- CATIA. The Mecanum Wheel's feasibility was thoroughly studied through ANSYS software. Load analysis was performed using various materials and several …

Experimental Verification And Integration Of A Next Generation Smart Power Management System, Tavis Clemmer

Graduate Theses and Dissertations

With the increase in energy demand by the residential community in this country and the diminishing fossil fuel resources being used for electric energy production there is a need for a system to efficiently manage power within a residence. The Smart Green Power Node (SGPN) is a next generation energy management system that automates on-site energy production, storage, consumption, and grid usage to yield the most savings for both the utility and the consumer. Such a system automatically manages on-site distributed generation sources such as a PhotoVoltaic (PV) input and battery storage to curtail grid energy usage when the price …

Manipulating The Mass Distribution Of A Golf Putter, Paul J. Hessler Jr.

Senior Honors Projects

Putting may appear to be the easiest but is actually the most technically challenging part of the game of golf. The ideal putting stroke will remain parallel to its desired trajectory both in the reverse and forward direction when the putter head is within six inches of the ball. Deviation from this concept will cause a cut or sidespin on the ball that will affect the path the ball will travel.

Club design plays a large part in how well a player will be able to achieve a straight back and straight through club head path near impact; specifically the …

Effect Of Manufacturing Processes On The Loss Factor And Other Mechanical Properties Of Kenaf Fiber-Reinforced Composites, Brian P. Spackman

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The characteristics essential for manufacturing parts and products are not well known for natural fiber-reinforced composite materials. Natural fibers display properties similar to glass fibers, and present a more environmentally friendly option for manufacturing composite materials. This research investigates various parameters in the manufacture of kenaf fiber-reinforced composites including cure time, density, matrix hardener ratio, surface treatment, and fiber length and examines the effect they have on mechanical properties of the composite material. Several samples were created and subjected to a vibrational test. Using known relationships, mechanical properties were extracted from the test results. Samples were found to exhibit repeatable …

Systems Modeling And Economic Analysis Of Photovoltaic (Pv) Powered Water Pumping Brackish Water Desalination For Agriculture, Michael A. Jones

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The objective of this study was to determine the economic viability of solar powered water pumping and desalination systems for agriculture. Growing global demand for agricultural production has put increased pressure on limited freshwater resources in various locations around the word. Many areas have low quality groundwater resources that have not been utilized for agriculture due to limited availability to electricity, high operational costs of diesel generators and the economics associated with water pumping and processing. Reverse osmosis is a desalination technology that removes salts and other minerals from low-quality water, making it fit for drinking or irrigation. Reduced costs …

Electrokinetic Flow In A Nanochannel With An Overlapped Electrical Double Layer, Zhuorui Song

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This research is a theoretical study aiming to improve the understanding of nanofluidic flows. Nanofluidic flows have a wide range of potential application in many fields, such as DNA analysis, drug delivery, analyte separation, power generation, and so on. The most common material used in nanofluidic flows is silica whose surfaces are charged mainly due to proton exchange with the fluids. Charges on the surfaces as well as near the surfaces in the fluid side cause a significantly different response of the fluids to the applied electric field or pressure difference compared to those at normal scale. In the previous …

Techno-Economic Feasibility And Life Cycle Assessment Of Dairy Effluent To Biofuel Via Hydrothermal Liquefaction, Hailey M. Summers

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Delactosed whey permeate (delac) is a low valued by-product in the dairy industry with 90 million tons annually disposed of worldwide. Upgrading delac to bioproducts, specifically biofuel, has been demonstrated at laboratory scale through yeast fermentation. However, the large-scale environmental impact and economic feasibility of this process is yet to be quantified. Further research, focused on evaluating the sustainability, scalability and economic feasibility of the fermentation pathway, directs research and development to move the technology towards commercialization. The enclosed research incorporates biological experimentation with engineering systems modeling to evaluate the large-scale environmental impacts and economic feasibility of generating bioproducts from …

Using Controlled Curing In A Custom Stereolithography-Based 3d Printing Machine To Obtain Graded Property Variations, Evan S. Schwahn

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

In an effort to construct materially graded parts, a strategy was studied that is based on varying ratios of interpenetrating polymer networks (IPNs) in a manner that can be adapted to 3D printing. Using IPNs has the benefit of allowing access to a broad range of property variation. The strategy used involves controlled partial curing of the first network, followed by washing of that network to remove uncured components, then swelling of the structure with a second polymer component and curing.

This method was utilized to control final IPN properties by controlling the extent of crosslinking of the initial network, …

Methods Of Processing Kenaf Chopped Strand Mats For Manufacturing Test Specimens And Composite Structures, Joshua W. Heil

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Every year in the United States, 10 to 11 million vehicles reach the end of their life cycle. Nearly all of these go to a recycling facility. After the recycling process is complete an average of 25% of each vehicle, by weight, goes to waste. This demonstrates the need to use natural fibers in parts that could be recycled, like parts that can be made from kenaf. There are many reasons to consider using natural/bio-fiber composites (bio-composites). These reasons include human health and environmental factors as well as advantages that natural fibers have over fiberglass, such as: lower costs and …

Parameterized Least-Squares Attitude History Estimation And Magnetic Field Observations Of The Auroral Spatial Structures Probe, Ryan J. Martineau

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

As charged particles from the Sun enter the Earth’s atmosphere and create the aurora borealis (Northern lights) and aurora australis (Southern lights), energy is transferred to the atmosphere. In order to better understand the energy transfer processes, the Auroral Spatial Structures Probe rocket was launched to make measurements in the active aurora. Several payloads were deployed by the rocket, each with sensors to measure the magnetic field and the electric field so that the way they change over time and in different positions could be observed. The measurements require accurate knowledge of the spacecraft orientation, and to that end this …

Experimental Validation Data For Cfd Of Steady And Transient Mixed Convection On A Vertical Flat Plate, Blake W. Lance

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In this computer age, simulations are becoming common in science and engineering. One category of simulation, Computational Fluid Dynamics (CFD), begins with physical equations but adds approximations and calibrations in order to complete solutions. Translating these equations into computer languages may cause unintended errors. If simulation results are to be used for decision making, their accuracy needs to be assessed. This accuracy assessment is the theory behind the field of Verification & Validation.

Verification involves confirming the translation of physical equations to computer language was per- formed correctly. It also features methods to detect many types of code errors. Validation …

Effective Properties Of Randomly Oriented Kenaf Short Fiber Reinforced Epoxy Composite, Dayakar Naik L.

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Natural fibers have drawn attention of researchers as an environmentally-friendly alternative to synthetic fibers. Developing natural fiber reinforced bio-composites are a viable alternative to the problems of non-degrading and energy consuming synthetic composites. This study focuses on (i) the application of kenaf fiber as a potential reinforcement and, (ii) determining the tensile properties of the randomly oriented short kenaf fiber composite both experimentally and numerically. Kenaf fiber micro-structure and its Young's modulus with varying gage length (10, 15, 20, and 25.4 mm) were investigated. The variation in tensile strength of kenaf fibers was analyzed using the Weibull probability distribution function. …

Mechanical Properties Of Kenaf Composites Using Dynamic Mechanical Analysis, Thomas A. Loveless

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Natural fibers show potential to replace glass fibers in thermoset and thermoplastic composites. Kenaf is a bast-type fiber with high specific strength and great potential to compete with glass fibers.

In this research kenaf/epoxy composites were analyzed using Dynamic Mechanical Analysis (DMA). A three-point bend apparatus was used in the DMA testing. The samples were tested at 1 hertz, at a displacement of 10 μm, and at room temperature.

The fiber volume content of the kenaf was varied from 20%-40% in 5% increments. Ten samples of each fiber volume fraction were manufactured and tested. The flexural storage modulus, the flexural …

Eight Degree Of Freedom Vehicle Model With Pitch, Yaw, Tire Control And Sensor Inputs, Sean T. Hirtle

Master's Theses

This research focuses on the development of an eight degree of freedom vehicle model in the MATLAB computing language. Its purpose is to provide flexibility in the modeling and implementation of signal inputs and crash avoidance logic while maintaining accuracy in the physics of the vehicle’s motion. Firstly, the equations of motion for the bodies involved under a reasonable set of assumptions were developed. Next the model was translated to computer code. By writing the model in SimuLink with *.m files, the modularity of the code is enhanced. To validate the model, several well defined tests were simulated.

To establish …

An Elaborate Data Set On Human Gait And The Effect Of Mechanical Perturbations, Jason K. Moore, Sandra K. Hnat, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

Here we share a rich gait data set collected from fifteen subjects walking at three speeds on an instrumented treadmill. Each trial consists of 120 s of normal walking and 480 s of walking while being longitudinally perturbed during each stance phase with pseudo-random fluctuations in the speed of the treadmill belt. A total of approximately 1.5 h of normal walking (>5000 gait cycles) and 6 h of perturbed walking (>20,000 gait cycles) is included in the data set. We provide full body marker trajectories and ground reaction loads in addition to a presentation of processed data that …

Collapsible Bicycle Frame, Keith Stone

Mechanical Engineering and Technology Senior Projects

There are many situations where people could choose to ride a bicycle, whether it is to go to school, to a job, to meet with friends, or just for recreational purposes. However, once people reach their destination and have a break between their trips, they are left with a bicycle with little means of storing it while they go about their day. Some people buy a bike lock so that they can secure it in a safe location, while others may just lean it against a wall or even roll it into the building with them. However, according to FBI …

Design And Implementation Of An Interactive Animatronic System For Guest Response Analysis, Brian Burns

GS4 Student Scholars Symposium

For nearly half a century, animatronic figures have provided entertainment in the theme park industry by simulating life-like animations and sounds. These figures enhance the storytelling experience by stimulating visual and audio senses among guests. Animatronics must be identified as human partners to establish status for dynamic interactions for enhanced acceptance and effectiveness as socially-interactive agents. An animatronic dragon, Kronos, has been designed, fabricated and implemented with human-identification sensors. The primary sensor input comes from an infrared camera, the PrimeSense Carmine, and includes an Arduino Mega 2560 as the center of control. Using the data from the depth camera, people …

Simulation Of Complex Ionic Liquid Ionization Process, Forrest Grady Kidd Iii

Research and Creative Activities Poster Day

The future of satellites will require dual-mode propulsion to obtain dynamic orbits. One set of propellants capable of dual-mode propulsion are ionic liquids. These energy-dense liquids have similar thrust characteristics to SOTA monopropellants and low vapor pressures making them safer to handle. That low vapor pressure makes ionization more difficult as it requires the propellant to be in a gaseous state. This requires experiments to determine how to efficently vaporize and ionize this propellant. Computational modelling is needed to guide these experiments and to develop simulations that can extrapolate the data to more complex geometries.

Conceptual Development Of An Impact-Attenuation System For Intersecting Roadways, Joseph G. Putjenter

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Longitudinal barriers are commonly used to shield hazards, including stiff bridge rail ends and slopes. In some locations, a secondary roadway intersects the primary roadway within the guardrail’s length-of-need (LON). Some intersections have as little as 15 ft (4.6 m) between the intersection and beginning of the bridge railing, which require short-radius guardrail systems. No short-radius systems have been tested and approved to current impact safety standards for shielding hazards with these conditions.

Site conditions provided by the Nebraska Department of Roads were used to determine the constraints for a new safety treatment for intersecting roadways and include intersection radii, …

Local Control Robotic Surgical Devices And Related Methods, Eric Markvicka, Tom Frederick, Jack Mondry, Joe Bartels, Shane Farritor

Department of Mechanical and Materials Engineering: Faculty Publications

The various robotic medical devices include robotic devices that are disposed within a body cavity and positioned using a support component disposed through an orifice or opening in the body cavity. Additional embodiments relate to devices having arms coupled to a device body wherein the device has a minimal profile such that the device can be easily inserted through smaller incisions in comparison to other devices without such a small profile. Further embodiments relate to methods of operating the above devices.

Investigation Of Synthesis And Processing Of Cellulose, Cellulose Acetate And Poly(Ethylene Oxide) Nanofibers Incorporating Anti-Cancer/Tumor Drug Cis-Diammineplatinum (Ii) Dichloride Using Electrospinning Techniques, Saheem Absar, Mujibur R. Khan, Kyle Edwards, Jeffrey Neumann

Mechanical Engineering: Faculty Publications

A model anti-cancer/tumor drug cis-diammineplatinum (II) dichloride (cisplatin) was loaded into micro- and nanofibers of cellulose, cellulose acetate (CA) and poly(ethylene oxide) (PEO), using various electrospinning techniques. Single-nozzle electrospinning was used to fabricate neat fibers of each category. Drug loading in cellulose fibers was performed using single-nozzle electrospinning. Encapsulation of cisplatin in CA and PEO-based fibers was performed using coaxial electrospinning. Morphological analysis of the fibers was performed using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). The various categories of fibers exhibited diverse morphological features depending on the material compositions and applied process parameters. The drug-loaded cellulose …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• Eagle Motorspots Places 5th Overall at Auburn

A Study Of Microwave Curing Of Underfill Using Open And Closed Microwave Ovens, Aditya Thakare

Dissertations and Theses

As the demand for microprocessors is increasing with more and more consumers using integrated circuits in their daily life, the demand on the industry is increasing to ramp up production.

In order to speed up the manufacturing processes, new and novel approaches are trying to change certain aspects of it. Microwaves have been tried as an alternative to conventional ovens in the curing of the polymers used as underfills and encapsulants in integrated circuits packages. Microwaves however being electromagnetic waves have non uniform energy distribution in different settings, causing burning or incomplete cure of polymers.

In this study, we compare …

Semi-Annual Program Progress Performance Report For The Electric Vehicle Transportation Center Pppr#3, Florida Solar Energy Center, David L. Block

FSEC Energy Research Center®

This document covers the program activities of the University of Central Florida's Electric Vehicle Transportation Center (EVTC) for the 6 month period of October 1, 2014 to March 31, 2015. The Electric Vehicle Transportation Center supports the U.S. Department of Transportation's strategic goal of planning for near-term integration of alternative fuel vehicles as a means to build a sustainable transportation system. The project objectives are to evaluate technologies, standards and policies to ensure seamless integration of electric vehicles (EVs) into a complex transportation network and electricity grid. The EVTC will bridge the gap between deployment of electric vehicles and the …