Mechanical Engineering Commons^™

Engineered Plasmonic Nanostructures For Nanomedicine, Christopher Matthew Portz

McKelvey School of Engineering Graduate Student Theses & Dissertations

No abstract provided.

An Approach To Thermocouple Temperature Measurements That Reduces Uncertainties Associated With Radiative Corrections, Siddharth Krishnan

McKelvey School of Engineering Graduate Student Theses & Dissertations

Obtaining accurate temperature measurements in flame environments with thermocouples is extremely challenging due to the effects of radiative heat loss. These losses are difficult to quantify and often cannot be corrected for or minimized without sacrificing spatial resolution. In this work, a new experimental methodology is presented that has shown potential to minimize the temperature correction by both increasing and controlling the effects of convection. This is accomplished through high speed rotation of the thermocouple. The rotation yields a high and known convective velocity over the thermocouple. Heat transfer can then be modeled for the thermocouple, and a functional relationship …

A Novel Intermediate-Temperature All Ceramic Iron–Air Redox Battery: The Effect Of Current Density And Cycle Duration, Xuan Zhao, Xue Li, Yunhui Gong, Nansheng Xu, Kevin Huang

Faculty Publications

We here report the energy storage characteristics of a new all ceramic iron–air redox battery comprising of a reversible solid oxide fuel cell as the charger/discharger and a Fe–FeO_x redox couple as the chemical storage bed. The effects of current density and cycle duration on specific energy and round trip efficiency of the new battery have been systematically studied at 650°C and 550°C. The results explicitly show that current density is the most influential variable on the performance, signifying the importance of improving electrochemical performance of the reversible solid oxide fuel cell.

Handloaded Rifle Ammunition: A Look Into The Assembly Process, Load Development Methods, And Its Comparison To Factory Ammunition, Jeffrey Dalton Snyder

Senior Theses

The purpose of this thesis is to educate the reader on the appeal of assembling firearm ammunition from its individual components, a process known as “handloading,” in comparison to factory assembled ammunition. This is accomplished by providing the reader with the benefits of handloading with an overview of the handloading process. Then, an example of a handload development method (Ladder Test) is discussed and performed. The results from the test are then analyzed and explained. Finally, the handloaded ammunition from the test is compared by function and price to factory ammunition from three different market segments.

The project portion of …

College Of Engineering Senior Design Competition Spring 2014, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Characterization Of 3d Interconnected Microstructural Network In Mixed Ionic And Electronic Conducting Ceramic Composites, William M. Harris, Kyle S. Brinkman, Ye Lin, Dong Su, Alex P. Cocco, Arata Nakajo, Matthew B. Degostin, Yu-Chen Karen Chen-Wiegart, Jun Wang, Fanglin Chen, Yong S. Chu, Wilson K. S. Chiu

Faculty Publications

The microstructure and connectivity of the ionic and electronic conductive phases in composite ceramic membranes are directly related to device performance. Transmission electron microscopy (TEM) including chemical mapping combined with X-ray nanotomography (XNT) have been used to characterize the composition and 3-D microstructure of a MIEC composite model system consisting of a Ce_0.8Gd_0.2O₂ (GDC) oxygen ion conductive phase and a CoFe₂O₄ (CFO) electronic conductive phase. The microstructural data is discussed, including the composition and distribution of an emergent phase which takes the form of isolated and distinct regions. Performance implications are considered …

Piezoresistive Sensing Of Bistable Micro Mechanism State, Jeffrey K. Anderson, Larry L. Howell, Jonathan W. Wittwer, Timothy W. Mclain

Faculty Publications

The objective of this work is to demonstrate the feasibility of on-chip sensing of bistable mechanism state using the piezoresistive properties of polysilicon, thus eliminating the need for electrical contacts. Changes in position are detected by observing changes in resistance across the mechanism. Sensing the state of bistable mechanisms is critical for various applications, including high-acceleration sensing arrays and alternative forms of nonvolatile memory. A fully compliant bistable micro mechanism was designed, fabricated, and tested to demonstrate the feasibility of this sensing technique. Testing results from two fabrication processes, SUMMiT IV and MUMPs, are presented. The SUMMiT mechanism was then …

Bi-Directional Variable Stiffness Magnetorheological Elastomer (Mre) Design, Sarah S. Trabia

College of Engineering: Graduate Celebration Programs

What is MRE?
•MRE is a semi-active silicon with embedded iron particles for variable stiffness changes under external magnetic flux

Research Objective
•Feasibility of using MRE as a haptic feedback device.
•Design a MRE device that can increase or decrease the stiffness.
•Design an effective way of providing a “pre-strain” to the base silicon material.

Computational Simulation
•COMSOL 4.3b Finite Element Analysis
•2D axisymmetric model
•Parametric sweep was run to find the amount of current needed to counteract the permanent magnet.

Investigation Of Phase Change In A36 Steel As A Result Of High Velocity Impact Loading, Mena Slewa

College of Engineering: Graduate Celebration Programs

High velocity projectiles cause severe damage to target materials upon impact. The target material is subject to high pressure and temperature over a very short period of time. This work studies the effects of Lexan projectiles impacting A36 steel at velocities between 3 km/sec and 6 km/sec. The damage zone develops in the target within 5 microseconds. Some steel materials go through a reversible phase change when subject to elevated temperature and high quasi-static pressure. It is unknown whether A36 steel experiences this phase change during high velocity impact. The objective of this work is to investigate if any permanent …

Computational Feasibility Study Of Dual Photon/Neutron Imaging Technique, Jessica Hartman, Alexander Barzilov

College of Engineering: Graduate Celebration Programs

• Non-destructive testing (NDT) is crucial for industrial applications, particularly when imaging of internal components or structures is desired

• Current NDT imaging techniques, such as x-rays, focus primarily on isolating unique shapes. Rarely are these methods capable of distinguishing materials or material composition

• Potential application in the car industry for testing and examining the functional durability of products
  − Vehicle engines are composed of a combination of low-z and high-z materials with significant variation in density
  − Being able to determine the location of material during operation eliminates the need to disassemble an engine during study

Design And Experimental Testing Of Nanoinjection Protocols For Delivering Molecules Into Hela Cells With A Bio-Mems Device, Zachary Kendall Lindstrom

Theses and Dissertations

Delivering foreign molecules into living cells is a broad and ongoing area of research. Gene therapy, or delivering nucleic acids into cells via non-viral or viral pathways, is an especially promising area for pharmaceutics. All gene therapy methods have their respective advantages and disadvantages, including limited delivery efficiency and low viability. Nanoinjection, or delivering molecules into cells using a solid lance, has proven to be highly efficient while maintaining high viability levels. In this thesis, an array of solid silicon lances was tested by nanoinjecting tens of thousands of HeLa cancer cells simultaneously. Several molecule types were injected in different …

Fixed Platform Crane For Equipment Access, Carlos Gonzalez, Steven Hollander, Yue Zhao, Jared Pellegrin, Travis Odom

Honors Capstones

No abstract provided.

Assortment Planning Of Automotive Products: Considerations For Economic And Environmental Impacts Of Technology Selection, Ali Taghavi, Ratna Babu Chinnam

Industrial and Systems Engineering Faculty Research Publications

A manufacturer’s assortment is the set of products that the company offers to its customers. Assortment planning considerably affects both the sales revenue and product offering costs for the company and it had experienced growing attention across different industries over recent decades. In this study, we propose a modeling framework that seeks to identify the optimal assortment for a manufacturer of configurable products (in particular, automobiles). Our model accounts for environmental considerations (Corporate Average Fuel Economy requirements, tail-pipe emissions, and greenhouse gas emissions related to the production of the fuel used to power the vehicle) during assortment planning. We formulate …

A Study On The Fluorescent Properties Of Nanoapatite Particles Under Externally Applied Magnetic Fields, Heidi Reid

TECHxpo

Hydroxyapatite is a naturally occurring mineral found in human bones and teeth. Its chemical formula is: Ca₁₀(PO₄)₆(OH)₂. In this project hydroxyapatite nanoparticles were doped with iron or europium to give the particles magnetic or fluorescent properties, respectively. The magnetic and fluorescent responses of these particles under externally applied magnetic fields has not yet been fully characterized.

Development Of Nhtsa’S Side Impact Test Procedure For Child Restraint Systems Using A Deceleration Sled : Part 2, Janet Brelin-Fornari, Sheryl Janca

Mechanical Engineering Grants

This report presents the results of the continued research and development of child seat side impact tests using the deceleration sled at Kettering University’s Crash Safety Center. The objective of this test series was to gain further insight into the sensitivity of the side impact test fixture response. Test variations included speed of impact, weight of the fixture, and impact characteristics. Additionally, 20 child restraint system (CRS) specific tests were conducted using a fixed set of test parameters.

Phase Transformation In Monolayer Molybdenum Disulphide With And Without Defects Under Tension Predicted By Atomistic Simulations, Khanh Quoc Dang

Graduate Theses and Dissertations

In addition to its use as a solid lubricant, molybdenum disulphide (MoS2) has gained recent attention as a possible substitute for silicon as it is increasingly difficult to keep shrinking down electronic devices made of silicon, the conventional electronic material. When thinned down to atomic thickness, monolayer MoS2 possesses very unique and promising electronic and electrical properties. Unlike electronic and electrical properties, knowledge of the mechanical properties and role of structural defects on these properties of monolayer MoS2 is unexplored. For this thesis, the two main objectives are (1) to gain insight about the failure mechanism of monolayer MoS2 by …

Redesigning The Walker: A More Durable & Dignified Device, Gianna M. Curcio

Renée Crown University Honors Thesis Projects - All

Aging and Rehabilitation Engineering is a prominent field with ample room for development of and improvement upon existing options. Surveying city sidewalks, family gatherings, hospital waiting rooms it becomes apparent that the need for mobility aids is abundant. My proposal for Capstone is to redesign the walker from both my mechanical engineering and sculptural perspectives. A walker is meant to improve the quality of life for those who are unable to walk unassisted, but should not come at the cost of the user’s dignity. The way we carry ourselves says a lot about us (i.e. character, will, and level of …

Influence Of Surface Modification On Corrosion And Biocompatibility Of Titanium Alloys, Zia Ur Rahman

Theses and Dissertations - UTB/UTPA

Titanium alloys enhance the quality and longevity of human life by replacing or treating various parts of the body. However, the aggressive body fluids lead to corrosion and metal ions dissolution. These ions leach to the adjacent tissues and causes adverse reactions. Surface modifications improve corrosion resistance and biological activity. In this investigation, electropolishing, magnetoelectropolishing, titanium coating and hydroxyapatite coating were carried out on commercially pure titanium (CPTi), Ti6Al4V and Ti6Al4V-ELI (Extra Low Interstitials). These surface modifications are known to affect surface chemistry, morphology, wettability, corrosion resistance and biocompatibility of these materials. In vitro cyclic potentiodynamic polarization tests were conducted …

Identifying Target Properties For The Design Of Meta-Material Tank Track Pads, Venkata Sampath Dangeti

All Theses

On track vehicle systems, track pads are designed to provide traction and support the weight of the vehicle, they have limited service life due to common failure by blowout. According to the literature, blowout is a failure mode caused by overheating due to hysteresis in elastomeric materials during high speed operations. Elastomers are used primarily for their high compliance, which is essential to protect the suspension components and maintain structural integrity of the track pad. The objective of the work is to explore the use of linear elastic meta-materials with optimized topology to replace elastomers and reduce or eliminate the …

Design Of A Custom Software Application To Monitor And Communicate Cnc Machining Process Information To Aid In Chatter Identification, Valerie Pezzullo

All Theses

In any manufacturing environment, it is important to be able to monitor the Computer Numerical Control (CNC) machining process so that high quality parts can be produced in the least amount of time in order to be profitable. This involves acquiring the proper parameters needed from the machine's controller, which can prove to be difficult with proprietary machine tools that tend to limit access to the internal data collected by the controller. This closed approach to controller design also means that many technological advances that have recently become prevalent in society are not being adopted in the manufacturing industry, preventing …

Nanostructured Transition Metal Oxides For Energy Storage And Conversion, Qiang Li

Theses and Dissertations - UTB/UTPA

The conventional film configuration of electrochemical electrodes hardly fulfills the high energy and efficiency requirements because heavy electroactive material deposition restricts ion diffusion path, and lowers power density and fault tolerance. In this thesis, I demonstrate that novel nanoarchitectured transition metal oxides (TMOs), e.g. MnO2, V2O5, and ZnO, and their relevant nanocomposites were designed, fabricated and assembled into devices to deliver superior electrochemical performances such as high energy and power densities, and rate capacity. These improvements could be attributed to the significant enhancement of surface area, shortened ion diffusion distances and facile penetration of electrolyte solution into open structures of …

Corrosion Assessment And Enhanced Biocompatibility Analysis Of Biodegradable Magnesium-Based Alloys, Luis Enrique Pompa

Theses and Dissertations - UTB/UTPA

Magnesium alloys have raised immense interest to many researchers because of its evolution as a new third generation material. Due to their biocompatibility, density, and mechanical properties, magnesium alloys are frequently reported as prospective biodegradable implant materials. Moreover, magnesium based alloys experience a natural phenomena to biodegrade in aqueous solutions due to its corrosive activity, which is excellent for orthopedic and cardiovascular applications. However, major concerns with such alloys are fast and non-uniform corrosion degradation. Controlling the degradation rate in the physiological environment determines the success of an implant. In this investigation, three grades of magnesium alloys: AZ31B, AZ91E and …

Process Capability In A Computer Integrated Manufacturing Cell, Andrew Austin

Masters Theses & Specialist Projects

With the rise of automation in traditional manufacturing processes, more companies are beginning to integrate computer integrated manufacturing (CIM) cells on their production floors. Through CIM cell integration, companies have the ability to reduce process time and increase production. One of the problems created with CIM cell automation is caused by the dependency the sequential steps have on one another. Dependency created by the previous step increases the probability that a process error could occur due to previous variation. One way to eliminate this dependency is through the use of an in-process measuring device such as a Renishaw spindle probe …

Economic, Energy And Ghg Emissions Performance Evaluation Of A Whispergen Mk Iv Stirling Engine Μ-Chp Unit In A Domestic Dwelling, Gerry Conroy, Aidan Duffy, Lacour Ayompe

Articles

This paper presents an assessment of the energy, economic and greenhouse gas emissions performances of a WhisperGen Mk IV Stirling engine μ-CHP unit for use in a conventional house in the Republic of Ireland. The energy performance data used in this study was obtained from a field trial carried out in Belfast, Northern Ireland during the period June 2004 - July 2005 by Northern Ireland Electricity and Phoenix Gas working in collaboration with Whispertech UK. A comparative performance analysis between the µ-CHP unit and a condensing gas boiler revealed that the µ-CHP unit resulted in an annual cost saving of …

Investigation Of Boiling Performance Of Graphene-Coated Surfaces, Daniel C. Stack

Renée Crown University Honors Thesis Projects - All

In this Capstone Project, I sought to investigate the boiling performance of graphene-coated surfaces. Boiling was accomplished in a pool boiling chamber, with samples of graphene-coating SiO₂ wafers. I developed a procedure for graphene transfer for sample fabrication. Samples were prepared with graphene grown on copper substrates by chemical vapor deposition (CVD). Graphene was transferred from copper substrates to SiO­₂ wafers by a thermal release transfer tape. Copper was etched away from the tape-graphene combination by ferric chloride, and the tape was peeled away after heating, leaving graphene on the SiO₂ substrate. Contact angles were measured to …

Scalable Nano Particle Production Of Low Bioavailability Pharmaceuticals For Augmented Aqueous Solubility, Aaron Madden

HIM 1990-2015

The billion dollar pharmaceutical research and development pipeline suffers greatly from high attrition rates of novel therapeutic compounds within pre-clinical and clinical trials. Poor bioavailability in many new drugs, originating in the various methodologies of high throughput screening, may explain part of these growing failure rates. One interpretation of this phenomenon relies on bioavailability's correlation with aqueous solubility; much modern processing allows chemicals to fully develop without touching water, yielding upwards of 90% of new chemical entities practically insoluble in aqueous media. Thus, one approach to alleviating bioavailability and potentially clinical attrition rates necessitates augmented aqueous solubility. The amorphous nanoparticle …

Multi-Muscle Fes Force Control Of The Human Arm For Arbitrary Goals, Eric M. Schearer, Yu-Wei Liao, Eric J. Perreault, Matthew C. Tresch, William D. Memberg, Robert F. Kirsch, Kevin M. Lynch

Mechanical Engineering Faculty Publications

We present a method for controlling a neuroprosthesis for a paralyzed human arm using functional electrical stimulation (FES) and characterize the errors of the controller. The subject has surgically implanted electrodes for stimulating muscles in her shoulder and arm. Using input/output data, a model mapping muscle stimulations to isometric endpoint forces measured at the subject’s hand was identified. We inverted the model of this redundant and coupled multiple-input multiple-output system by minimizing muscle activations and used this inverse for feedforward control. The magnitude of the total root mean square error over a grid in the volume of achievable isometric endpoint …

Bellevue-Santa Fe Charter School Solar Panel Project, Dulce Arroyo Martinez, Henrik Lee, Moises Quiroz, Timothy Iafrate

Mechanical Engineering

This project covers the design, manufacture, and installation of solar panel frames on a charter school in Avila Beach, CA. Through preliminary research regarding important factors (such as solar movement, ideal panel angle, and site-specific factors), a frame that meets the standards set forth in the California Building Codes was designed. After approval by presiding authorities, parts specified in the design were ordered, inspected upon arrival, and manufactured to the design as necessary. Much of the challenge was related to the installation aspect of the project—coordination with the proper authorities and correct submission of applications was integral to the success …

The Tlc Method For Modeling Creep Deformation And Rupture, David May

HIM 1990-2015

This thesis describes a novel new method, termed the Tangent-Line-Chord (TLC) method, that can be used to more efficiently model creep deformation dominated by the tertiary regime. Creep deformation is a widespread mechanical mode of failure found in high-stress and temperature mechanical systems. To accurately simulate creep and its effect on structures, researchers utilize finite element analysis (FEA). General purpose FEA packages require extensive amounts of time and computer resources to simulate creep softening in components because of the large deformation rates that continuously evolve. The goal of this research is to employ multi-regime creep models, such as the Kachanov-Rabotnov …

Damage Stability Of Inland Towboats, Kyle Stephen Tyson

Senior Honors Theses

The focus of this report is to investigate whether a towboat would be able meet damaged stability requirements. In order to evaluate what type of damage stability requirements could be considered, two damage stability criteria were selected for this investigation: Offshore Supply Vessel and Passenger Vessel Damage Criteria. Two vessels are then evaluated using General Hydrostatic Software (GHS) to find the maximum allowable vertical center of gravity allowed by each set of criteria. These values are then compared to the vessels’ operating conditions to show if the vessels would currently be able to operate. Ultimately it is found that the …