Mechanical Engineering Commons^™

Unplanned Maintenance Scheduling A Lean Application Using Group Technology And Adaptive Conflict Resolution, Manish Shashibhushan Mittal

Mechanical & Aerospace Engineering Theses & Dissertations

Historically, production of ships is based on Group Technology (GT) with product oriented work breakdown structure. Recent GT applications have been effectively adapted to ship maintenance operations. In this thesis we have developed a GT based classification and coding system for the three basic requirements for maintenance operations: personnel, resources and space.

Traditionally unplanned maintenance activities are executed as and when the resources are available. This thesis presents a method for planning and scheduling these jobs with many of the traditional Lean manufacturing principles first adapted appropriately and then applied to Lean Maintenance. This method begins with identifying the priority …

An Error Threshold Criterion For Singular Value Decomposition Modes Extracted From Piv Data, Brenden P. Epps

Link Foundation Ocean Engineering and Instrumentation Fellowship Reports

Singular value decomposition (SVD) is often used as a tool to analyze particle image velocimetry (PIV) data. However, experimental error tends to corrupt higher SVD modes, in which the root mean square velocity value is smaller than the experimental error. Therefore, we suggest that the threshold criterion, sk [ ffiffiffiffiffiffiffi DT p ; can be used as a rough limit of the validity of SVD modes extracted from experimental data (where sk is the singular value of mode k, D and T are the number of data sites and time steps, respectively, and is the root mean square PIV error). …

Technical Research Needs For Sustainable Buildings: Results From A Multidisciplinary Nsf Workshop, Leidy Klotz, Vivien Loftness, Gregor Henze, David J. Sailor, David Riley

Mechanical and Materials Engineering Faculty Publications and Presentations

This article describes research needs for sustainable buildings as defined in a July 2009 National Science Foundation-sponsored workshop. This workshop brought together building researchers with researchers in the areas of distributed renewable energy and multifunctional materials to engage their expertise and identify overlapping research needs and opportunities. An overview of sustainable building design provided the broad context for discussion. This overview was followed by focused presentations in building control systems, advanced building envelopes, and systems and process integration. In addition, presentations on distributed renewable energy and multi-functional materials supported the participants in outlining and generating research needs that connect the …

Towards Supervised Autonomous Task Completion Using An In Vivo Surgical Robot, Jason J. Dumpert

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Laparoscopy is a minimally invasive alternative to traditional abdominal surgery. Unlike traditional surgery, a laparoscopic procedure can be completed using small incisions. The use of these small incision results in reduced pain to the patient, shorter recovery times, and less trauma to skin, muscle and other tissues. However, these benefits to the patient are offset by the increased difficulty to the surgeon performing the procedure. These difficulties include reduced dexterity, reduced perception, and longer procedure times. The use of small in vivo robotic devices in minimally invasive surgery is one possible solution to these problems. The movement of these devices …

Shear Rate Threshold For The Boundary Slip In Dense Polymer Films, Nikolai V. Priezjev

Mechanical and Materials Engineering Faculty Publications

The shear rate dependence of the slip length in thin polymer films confined between atomically flat surfaces is investigated by molecular dynamics simulations. The polymer melt is described by the bead-spring model of linear flexible chains. We found that at low shear rates the velocity profiles acquire a pronounced curvature near the wall and the absolute value of the negative slip length is approximately equal to thickness of the viscous interfacial layer. At higher shear rates, the velocity profiles become linear and the slip length increases rapidly as a function of shear rate. The gradual transition from no-slip to steady-state …

Cracked Rotor Detection By Recurrence Plots, Grzegorz Litak, Jerzy T. Sawicki, Rafał Kaspereka

Mechanical Engineering Faculty Publications

Recurrence plots (RPs) analysis has been used to distinguish cracked and healthy rotor responses. It has been shown that the recurrence criteria of the dynamical systems defined by the RPs can indicate the damages of the rotating shaft using relatively short time series.

Haptic Collision Avoidance For A Remotely Operated Quadrotor Uav In Indoor Environments, Adam M. Brandt

Theses and Dissertations

A quadrotor is an omnidirectional unmanned air vehicle that is suitable for indoor flight because of its ability to hover and maneuver in confined spaces. The remote operation of this type of vehicle is difficult due to a lack of sensory perception; typically, the view from the onboard camera is the only information transmitted to the pilot. This thesis proposes using force feedback exerted by the command input device on the hand of the pilot to assist in avoiding collisions while navigating in indoor environments. Five candidate algorithms are presented for calculating the forces to be felt by the pilot …

Composite Manufacturing Of Small Wind Turbine Blades- Utility Scale Methods Applied To Small Wind, Bryan Kyle Edwards

Master's Theses

Cal Poly, San Luis Obispo’s first wind turbine explores the methods and processes that are employed to manufacture utility scale wind turbines, and applies them to small scale wind turbines. The primary objective is to promote the development of small scale wind turbine blades in ways that resemble, as closely as possible, the construction and methods of utility scale turbine blade manufacturing. Vacuum infusion is employed to create a hollow, multi piece, lightweight design using carbon fiber and fiberglass with an epoxy based resin. A “rapid prototyping” method is developed using high density foam molds that allows short cycle time …

Phase Change Mechanisms During Femtosecond Laser Pulse Train Ablation Of Nickel Thin Films, Xin Li, Lan Jiang, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The mechanisms of nickel thin films irradiated by femtosecond laser pulse trains are studied by a model using molecular dynamics simulations and two-temperature model. It is found that the pulse train technology can change energy transport and corresponding phase change processes. Compared with single pulse ablation at the same total fluence, the pulse trains lead to (1) lower ablation rate with more and smaller uniform nanoparticles, (2) higher film surface temperatures and longer thermalization time, (3) much lower electron thermal conductivity that can further control heat-affected zone, (4) significantly smaller film compressive stresses and tensile stresses which reduce microcracks, and …

An Elaborate Data Set Characterizing The Mechanical Response Of The Foot, Ahmet Erdemir, Pavana A. Sirimamilla, Jason P. Halloran, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

Mechanical properties of the foot are responsible for its normal function and play a role in various clinical problems. Specifically, we are interested in quantification of foot mechanical properties to assist the development of computational models for movement analysis and detailed simulations of tissue deformation. Current available data are specific to a foot region and the loading scenarios are limited to a single direction. A data set that incorporates regional response, to quantify individual function of foot components, as well as the overall response, to illustrate their combined operation, does not exist. Furthermore, the combined three-dimensional loading scenarios while measuring …

Rayleigh Flow Of Two-Phase Nitrous Oxide As A Hybrid Rocket Nozzle Coolant, Lauren May Nelson

Master's Theses

The Mechanical Engineering Department at California Polytechnic State University in San Luis Obispo currently maintains a lab-scale hybrid rocket motor for which nitrous oxide is utilized as the oxidizer in the combustion system. Because of its availability, the same two-phase (gas and liquid) nitrous oxide that is used in the combustion system is also routed around the throat of the hybrid rocket’s converging-diverging nozzle as a coolant. While this coolant system has proven effective empirically in previous tests, the physics behind the flow of the two-phase mixture is largely unexplained. This thesis provides a method for predicting some of its …

Hole-Type Aerospike Compound Nozzle Thrust Vectoring, Stanley Ikuo Beebe

Master's Theses

Compound aerospike nozzles were designed and tested as part of an ongoing

experimental study to determine the feasibility of thrust vectoring an aerospike

nozzle with the addition of a secondary port. Earlier phases of the study have

indicated that a compound aerospike nozzle could provide sufficient thrust

vectoring. The addition of a hole-type secondary port was found to provide

effective thrust vectoring.

Experiments were carried out to determine the effects of secondary port size,

secondary port inlet geometry and compound aerospike nozzle chamber

pressure. Results show good predictability, axisymmetric flow, and emphasize

the importance of a radius on secondary port …

Steady-Periodic Heating Of A Cylinder, Kevin D. Cole, Paul E. Crittenden

Department of Mechanical and Materials Engineering: Faculty Publications

Steady periodic heating is an important experimental technique for measurement of thermal properties. In these methods the thermal properties are deduced from a systematic comparison between the data (such as temperature) and a detailed thermal model. This paper addresses steady-periodic heat transfer on cylindrical geometries with application to thermal-property measurements. The method of Green’s functions is used to provide a comprehensive collection of exact analytical expressions for temperature in cylinders. Five kinds of boundary conditions are treated for one-, two-, and three-dimensional geometries. For some geometries an alternate form of the Green’s function is given, which can be used for …

Me-Em Enewsbrief, September 2009, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Performance Flight Testing Of Small Electric Powered Unmanned Aerial Vehicles, Jon N. Ostler, W. Jerry Bowman, Deryl O. Snyder, Timothy W. Mclain

Faculty Publications

Flight testing methods are developed to find the drag polar for small unmanned aerial vehicles powered by electric motors with fixed-pitch propellers. Wind tunnel testing was used to characterize the propeller-motor efficiency. The drag polar was constructed using data from flight tests. This drag polar was then used to find the following performance parameters: maximum velocity, minimum velocity, velocity for maximum range, velocity for maximum endurance, maximum rate of climb, maximum climb angle, minimum turn radius, maximum turn rate, and maximum bank angle. The developed flight testing methods are used to characterize the performance of a small UAV.

On-Line Realtime Water Quality Monitoring And Control For Swimming Pools, Paul Duffy, Gerard Woods, Sean O'Hogain, James Walsh, C. Caplier

Conference Papers

Effective swimming pool water quality monitoring and control systems are important to safeguard public health and for bather comfort. Most Irish swimming pool monitoring systems rely heavily on manual methods for sampling, testing and data recording of important parameters. Microbiological testing is infrequent and results can often take days. The goal of this research is to develop a water quality monitoring and control system with real time data logging, automatic data analysis, remote monitoring and control, microbiological sampling capabilities and online connectivity. National Instruments hardware and its software package LabView form the basis of the monitoring and control system. Several …

Electrohydrodynamic Manipulation Of Multiphase Fluids, Sai C. Nudurupati

Dissertations

In microfluidic devices, the fluid can be manipulated either as continuous streams or droplets. The latter is particularly attractive as individual droplets can not only move but also split and fuse, thus offer a greater flexibility in applications such as a laboratory-on- a-chip. In this thesis, a technique is developed that uses an externally applied electric field for manipulating and removing particles trapped on the surface of a drop. The drop is assumed to be immersed in another liquid with which it is immiscible, and the electric field is generated by placing electrodes on the sides of the microdevice. Both …

Preliminary Modelling Results For An Otto Cycle/Stirling Cycle Hybrid-Engine-Based Power Generation System, Barry Cullen, Jim Mcgovern, Michel Feidt, Stoian Petrescu

Conference Papers

This paper presents preliminary data and results for a system mathematical model for a proposed Otto Cycle / Stirling Cycle hybrid-engine-based power generation system. The system is a combined cycle system with the Stirling cycle machine operating as a bottoming cycle on the Otto cycle exhaust. The application considered is that of a stationary power generation scenario wherein the Stirling cycle engine operates as a waste heat recovery device on the exhaust stream of the Otto cycle engine. This paper is primarily concerned with the development of a model for a suitable Stirling cycle engine capable of running on the …

Strain Energy And Lateral Friction Force Distributions Of Carbon Nanotubes Manipulated Into Shapes By Atomic Force Microscopy, Mark C. Strus, Roya R. Lahiji, Pablo Ares, Vincente Lopez, Arvind Raman, Ron R. Reifenberger

Other Nanotechnology Publications

The interplay between local mechanical strain energy and lateral frictional forces determines the shape of carbon nanotubes on substrates. In turn, because of its nanometer-size diameter, the shape of a carbon nanotube strongly influences its local electronic, chemical, and mechanical properties. Few, if any, methods exist for resolving the strain energy and static frictional forces along the length of a deformed nanotube supported on a substrate. We present a method using nonlinear elastic rod theory in which we compute the flexural strain energy and static frictional forces along the length of single walled carbon nanotubes (SWCNTs) manipulated into various shapes …

On Tgo Creep And The Initiation Of A Class Of Fatigue Cracks In Thermal Barrier Coatings, Mercedes T. Hernandez, Anette M. Karlsson, Marion Bartsch

Mechanical Engineering Faculty Publications

The initiation of a class of fatigue cracks observed in thermal barrier coatings (TBCs) subjected to thermal gradient mechanical fatigue testing is investigated. The coating system is based on a NiCoCrAlY bond coat and a partially yttria stabilized zirconia top coat. To explain the development of the cracks of interest, the thermo-mechanical response of the bond coat and the thermally grown oxide (TGO) is examined and quantified through finite element analyses. The models include non-linear and time-dependent behavior such as creep, TGO growth stress, and thermo-mechanical cyclic loading. The simulations suggest that stress-redistribution due to creep can lead to tensile …

Doppler Broadening Analysis Of Steel Specimens Using Accelerator Based In Situ Pair Production, V. Makarashvili, Douglas P. Wells, Ajit K. Roy

Mechanical Engineering Faculty Research

Positron Annihilation Spectroscopy (PAS) techniques can be utilized as a sensitive probe of defects in materials. Studying these microscopic defects is very important for a number of industries in order to predict material failure or structural integrity. We have been developing gamma‐induced pair‐production techniques to produce positrons in thick samples ( ∼4–40 g/cm2, or ∼0.5–5 cm in steel). These techniques are called ‘Accelerator‐based Gamma‐induced Positron Annihilation Spectroscopy’ (AG‐PAS). We have begun testing the capabilities of this technique for imaging of defect densities in thick structural materials. As a first step, a linear accelerator (LINAC) was employed to produce photon beams …

Development Of Guidelines For Deformable And Rigid Switch In Ls-Dyna Simulation, Ling Zhu

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

LS-Dyna simulations have been widely used in research and design to reduce fiscal and time costs. In order to improve the simulation’s efficiency, the components which experience negligible deformations are usually modeled as rigid bodies. However, the use of rigid bodies is always restricted. Though the use of more rigid bodies can save computing resources for a particular simulation, less rigid bodies are preferred for building a model in order to broaden its applications. Meanwhile, if a simulation task has multiple events, the application of rigid bodies in the particular simulation is always minimized so that it can satisfy all …

Numerical Characterizaton Of The Inlet Flow In Eleven Radial Flow Turbomachines, Nathan O. Packard

Theses and Dissertations

Statistics based models have been developed previously to predict a priori the performance of new radial flow compressors and pumps and to model test data of previously designed and tested machines. Unfortunately, critical dynamics in the inlet region of the machines were neglected. Consequently, room for improvement in the previous modeling exists. Historical practice has placed a static pressure tap on the shroud just upstream of the impeller leading edge for experimental characterization. The previously developed statistics based models rely on this measured data. However, the location of the tap may be vulnerable to high gradients which would decrease the …

Analysis Of Induced Vibrations In Fully-Developed Turbulent Pipe Flow Using A Coupled Les And Fea Approach, Thomas P. Shurtz

Theses and Dissertations

Turbulent flow induced pipe vibration is a phenomenon that has been observed but not fully characterized. This thesis presents research involving numerical simulations that have been used to characterize pipe vibration resulting from fully developed turbulent flow. The vibration levels as indicated by: pipe surface displacement, velocity, and acceleration are characterized in terms of the parameters that exert influence. The influences of geometric and material properties of the pipe are investigated for pipe thickness in the range 1 to 8 mm at a diameter of 0.1015 m. The effects of pipe elastic modulus are explored from 3 to 200 GPa. …

Piezoresistive Models For Polysilicon With Bending Or Torsional Loads, Gerrit T. Larsen

Theses and Dissertations

This thesis presents new models for determining piezoresistive response in long, thin polysilicon beams with either axial and bending moment inducing loads or torsional loads. Microelectromechanical (MEMS) test devices and calibration methods for finding the piezoresistive coefficients are also presented for both loading conditions. For axial and bending moment inducing loads, if the piezoresistive coefficients are known, the Improved Piezoresistive Flexure Model (IPFM) is used to find the new resistance of a beam under stress. The IPFM first discretizes the beam into small volumes represented by resistors. The stress that each of these volumes experiences is calculated, and the stress …

Development Of A Theoretical Decoupled Stirling Cycle Engine, Barry Cullen, Jim Mcgovern

Conference Papers

The Stirling cycle engine is gaining increasing attention in the current energy market as a clean, quiet and versatile prime mover for use in such situations as solar thermal generation, micro cogeneration and other micro distributed generation situations. A theoretical Stirling cycle engine model is developed. Using a theoretical decoupled engine configuration in which working space swept volume, volume variation, phase angle and dead space ratio are controlled via a black-box electronic controller, a model is developed that is to be used as a tool for analysis of the ideal Stirling cycle engine and the limits on its real world …

Experimental Characterization Of Flow Induced Vibration In Turbulent Pipe Flow, Andrew S. Thompson

Theses and Dissertations

This thesis presents results of an experimental investigation that characterizes the wall vibration of a pipe with turbulent flow passing through it. Specifically, experiments were conducted using a water flow loop to address three general phenomena. The topics of investigation were: 1) How does the pipe wall vibration depend on the average flow speed, pipe diameter, and pipe thickness for an unsupported pipe? 2) How does the behavior change if the pipe is clamp supported at various clamping lengths? 3) What influence does turbulence generation caused by holed baffle plates exert on the pipe response? A single pipe material (PVC) …

Off-Axis Stiffness And Piezroresistive Sensing In Large-Displacement Linear-Motion Microelectromechanical Systems, David G. Smith

Theses and Dissertations

Proper positioning of Microelectromechanical Systems (MEMS) components influences the functionality of the device, especially in devices where the motion is in the range of hundreds of micrometers. There are two main obstacles to positioning: off-axis displacement, and position determination. This work studies four large-displacement devices, their axial and transverse stiffness, and piezoresistive response. Methods for improving the device characteristics are described. The folded-beam suspension, small X-Bob, large X-Bob and double X-Bob were characterized using non-dimensional metrics that measure the displacement with regard to the size of the device, and transverse stiffness with regard to axial stiffness. The stiffness in each …

Comment On "A Stochastic Biomechanical Model For Risk And Risk Factors Of Non-Contact Anterior Cruciate Ligament Injuries", Antonie J. Van Den Bogert, Scott G. Mclean

Mechanical Engineering Faculty Publications

No abstract provided.

Development Of A Melt Pool Tracking Vision System For Laser Deposition, Todd E. Sparks, Lie Tang, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper chronicles the development of a vision system for tracking melt pool morphology in the laser metal deposition process. This development is to augment an existing temperature feedback control system. Monitoring both the temperature and shape of the melt pool is necessary because of the effects of local geometry on the cooling rate at the melt pool. Temperature feedback alone cannot accommodate this effect without complex process planning. The vision system's hardware, software, and integration into the laser deposition system's controller is detailed in this paper. Preliminary testing and the effects on depositionquality is also discussed.