Mechanical Engineering Commons^™

Numerical Analysis Of Two And Three Dimensional Recessed Flame Holders For Scramjet Applications, Douglas L. Davis

Theses and Dissertations

This study investigated the flame holding properties of recessed cavities in supersonic flow using numerical analysis techniques. A simplified analytical model indicated that an important property for flame holding was the lower residence time. Several chemical kinetic rate models for hydrogen and hydrocarbon combustion were compared. The perfectly stirred reactor model also indicated that trace species diffusion should increase flame spreading rate, and that heat loss reduces flame holding limits. After nonreacting calibration, two-dimensional simulations confirmed the perfectly stirred reactor results for blowout limits. Also, the effect of trace species diffusion on flame spreading was shown to be negligible, and …

How Contractors Really Size Air Conditioning Systems, Florida Solar Energy Center, Robin Vieira

FSEC Energy Research Center®

This paper presents results from 489 of the 5559 Florida air conditioning contractors surveyed (an 8.5% response rate) regarding equipment sizing methods in new residences. Air conditioning sizing is accomplished by using ACCA's Manual-J procedure by 33% of the respondents, software by 34.4% of the respondents, square-footage by 24.2% and other estimate procedures by about 8.4%. Those using square-footage estimates varied from 350 square-feet- per-ton to 700 square-feet-per-ton. Over a third of respondents indicated oversizing intentionally on some jobs, in order to avoid complaints, accommodate future expansions, enable quicker cooling down of homes, and to allow for lower cooling set …

Are Energy Savings Due To Ceiling Fans Just Hot Air?, Florida Solar Energy Center, Patrick James

FSEC Energy Research Center®

Human comfort studies have shown that people prefer higher temperatures when they are subjected to a breeze. Ceiling fans are often used to create air motion in residences. Simulation studies (including one given in this paper) have demonstrated that in Florida, using ceiling fans combined with raising a home's temperature 2° F will generate about a 14% net savings in annual cooling energy use (subtracting out the ceiling fan energy and accounting for internally released heat). This savings drops to 2.6% with a 1° F increase in set point and to a negative 3.7% savings with only a 0.5° F …

Recent Developments In Extrusion Freeform Fabrication (Eff) Utilizing Non-Aqueous Gel Casting Formulations, Greg Hilmas, John L. Lombardi, Robert A. Hoffman, Kevin Stuffle

Materials Science and Engineering Faculty Research & Creative Works

Extrusion Freeform Fabrication (EFF) was shown to be an extremely versatile method for fabricating Functionally Graded Materials (FGMs) The approach is inexpensive and potentially feasible for grading between any thermodynamically compatible ceramic-metal, ceramic-ceramic, or metal-metal material combination. Several material systems were investigated in this study including alumina-304 stainless steel, zirconia-304 stainless steel, alumina-Inconel 625, zirconiaInconel625, alumina-nickel aluminide, zirconia-nickel aluminide, titanium carbide-InconeI625, titanium diboride-nickel aluminide, and tungsten carbide-nickel aluminide. A controlled gradient was demonstrated between the end members for all of the above compositions. The FGMs were hot pressed to achieve near theoretical densities, providing flexural strengths as high as 1000 …

Proposal For Renovation Of 1920 Tractor Test Lab Into Museum, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Bids for Renovating Roof State Fair Display Further Funding for Renovation

Daylight Dimming Systems: Studies In Energy Savings And Efficiency, Florida Solar Energy Center, Lynn Schrum

FSEC Energy Research Center®

Three studies were conducted at Florida Solar Energy Center (FSEC) to study the lighting energy savings of daylight dimming systems. The Daylighting Test Facility (DTF) was used to study daylight dimming systems and how aperture orientation and blinds affect performance. The energy consumption was compared in two pairs of offices for all four window orientations: north, south, east and west. One office in each pair had blinds in a fixed position (down and open) and the other office had no blinds. The study showed that the energy savings ranged from 24% to 51% depending on the orientation and blinds.

The …

Measured Field Performance And Energy Savings Of Occupancy Sensors: Three Case Studies, Florida Solar Energy Center, David Floyd

FSEC Energy Research Center®

Occupancy sensors have the potential to significantly reduce energy use by switching off electrical loads when a normally occupied area is vacated. While occupancy sensors can be used to control a variety of load types, their most popular use has been to control lighting in commercial buildings. Manufacturers claim savings of 15% to 85%, although there is little published research to support the magnitude or timing of reductions. Energy savings and performance are directly related to the total wattage of the load being controlled, effectiveness of the previous control method, occupancy patterns within the space and proper sensor commissioning. In …

Finite Element Study Of The Effect Of The Blank Holder Force And Drawbead On The Sheet Metal's Drawability In The Deep Drawing Process, Shada Philip Halim

Archived Theses and Dissertations

No abstract provided.

The Development And Evaluation Of The Knife Finite Element, Brett W. Clark

Theses and Dissertations

This thesis presents the development and evaluation of the knife finite element which is a degenerate case of a hexahedral element. The knife connectivity is an artifact of automatic all-hexahedral mesh generators. Currently, knives are propagated to the surface of the mesh for removal. However since this disturbs the surface mesh, other alternatives are needed. This thesis investigates the option of leaving the knife connectivity in the mesh and treating it as a valid finite element. The shape functions and stiffness matrix for the knife element are derived and evaluated using theoretical and practical evaluations. It is concluded that the …

Solute Nucleation And Growth In Supercritical Fluid Mixtures, Gregory T. Smedley, Gerald Wilemski, W. Terry Rawlins, David B. Oakes, Prakash Joshi, William W. Durgin

Office of the Provost Scholarship

This research effort is directed toward two primary scientific objectives: (1) to determine the gravitational effect on the measurement of nucleation and growth rates near a critical point and (2) to investigate the nucleation process in supercritical fluids to aid in the evaluation and development of existing theoretical models and practical applications. A nucleation pulse method will be employed for this investigation using a rapid expansion to a supersaturated state that is maintained for ≈ 1 ms followed by a rapid recompression to a less supersaturated state that effectively terminates nucleation while permitting growth to continue. Nucleation, which occurs during …

Characterization Of The Si/Sio2 Interface Formed By Remote Plasma Enhanced Chemical Vapor Deposition From Sih4/N2O With Or Without Chlorine Addition, Young-Bae Park, Xiaodong Li, Shi-Woo Rhee

Faculty Publications

The Si/SiO₂interface formed by remote plasma enhanced chemical vapor deposition (RPECVD) at low temperature with SiH₄/N₂O or SiH₄/N₂O/Cl₂ was studied and compared with thermal oxidation. The interface of the CVD SiO₂ without chlorine addition is rougher than that with chlorine addition. But the surface roughness of CVD SiO₂ films increases with chlorine addition. The thermal oxidation induces strong interface strains, and the strains generated by the CVD SiO₂ without chlorine addition are stronger and are distributed more nonuniformly than those by the chlorinated SiO₂. …

Surface Modification Of Titanium Foil Substrates In Experimental Solar Cells, Richard Nishimuro, Omar S. Es-Said

Mechanical Engineering Faculty Works

A case study involving surface smoothing of titanium foil was obtained from a solar cell research company. It was believed that the rougher surface of metals was responsible for low solar cell efficiency when using titanium foil rather than glass as a substrate. A method was needed to reduce the surface asperity height of the titanium foil from the existing 1 μm to less than 0.1 μm. Several methods were investigated. The recommended method was the use of an excimer laser, a laser powered by excited noble gas-halide molecules as a lasing medium.

On The Excessive Porosity In The Welds Of Ams 4975 Titanium Air Compressor Rotor Duct, Stefanie Roberts, Rachel Hoang, Laura Pate, Joseph Foyos, Richard Nishimuro, Omar S. Es-Said

Mechanical Engineering Faculty Works

This case study deals with the existence of excessive porosity in the welds of an air compressor rotor duct. The duct does not meet the testing criteria because the diameters of the pores in the weld exceeded allowable specifications. As such, the duct failed inspection for excessive pore diameter and shrinkage due to welding. At this point, the part was beyond repair, and it was scrapped. The possible causes of failure were analyzed, and it was concluded that the source of the problem was the welding technique.

Comprehensive Conjunctive-Use Management Of Connected Surface Water Groundwater Systems Using Stochastic Inputs And Uncertainties, Seshadri Suryanarayana

Civil & Environmental Engineering Theses & Dissertations

A comprehensive conjunctive-use management model is developed. The dynamics of flow and solute transport processes in connected surface water groundwater systems are integrated by a dual programming management model. The governing aquifer flow parameters and streamflows are treated as stochastic random processes. Multiple realizations of the random field are generated and are explicitly incorporated in a non-linear optimization model along with other system, environmental, and management constraints. To facilitate management of large aquifer systems, a linked simulation-optimization approach is used. The simulation program generates the response matrices for flow and transport processes. The management model then determines optimal well discharges …

An Investigation Of The Influence Of Tightening Torque And Sea Water On Pultruded Gfrp Composite Bolted Joints, Satish Devara

Mechanical & Aerospace Engineering Theses & Dissertations

Pultruded glass fiber-reinforced polymeric matrix composites are candidate materials for ever-increasing structural applications due to their continuous production capability, light weight and excellent properties. In this investigation an extensive experimental study has been carried out to understand their structure, basic mechanical properties, and influence of fiber orientation on the unnotched, notched and pin-loaded tensile strength. Furthermore, the effects of sea water and tightening torque separately and together on the failure loads and failure modes of the bolted joints are also studied. It is shown that blockshear failure mode is also a principal mode of failure in the bolted joints of …

Lattice Truss Structural Response Using Energy Methods, Winfred Scottson Kenner

Mechanical & Aerospace Engineering Theses & Dissertations

A deterministic methodology is presented for developing closed-form deflection equations for two-dimensional and three-dimensional lattice structures. Four types of lattice structures are studied: beams, plates, shells and soft lattices. Castigliano's second theorem, which entails the total strain energy of a structure, is utilized to generate highly accurate results. Derived deflection equations provide new insight into the bending and shear behavior of the four types of lattices, in contrast to classic solutions of similar structures. Lattice derivations utilizing kinetic energy are also presented, and used to examine the free vibration response of simple lattice structures. Derivations utilizing finite element theory for …

Energy Use Analysis Of A Multi-Unit Housing Facility A Parametric Study, Brian David Cooper

Mechanical & Aerospace Engineering Theses & Dissertations

In the continuing effort to reduce the energy use of buildings, design engineers and architects are called upon to design facilities which are more efficient and use less energy. The prediction of the energy used by a building's systems and occupants, for different design options and combinations, is an important part of the design of an energy efficient building.

An energy use analysis was conducted to determine the accuracy of a computerized building energy analysis simulation when only preliminary design information is available. Additional studies were made to determine the accuracy of the simulation as more detailed design, construction and …

Effects Of Elevated Temperature On The Physical Aging Of A High Temperature Thermoplastic Resin And Composite, Mark Feldman

Mechanical & Aerospace Engineering Theses & Dissertations

Development of a High Speed Civil Transport is considered by the commercial aviation industry to be one of the next big challenges for our national aircraft industry. Critical to the success of this aircraft is the development of advanced polymeric composites for both the primary and secondary structures and the predictive methodology necessary for assessment of long term durability. While polymeric composites offer an excellent strength to weight ratio a key disadvantage is the time dependent properties exhibited by the polymer matrix which can age and ultimately effect the resultant stiffness of a laminate.

Experimental studies were performed to determine …

Rectified Synthesis Of Coupler Driven Four Bar Mechanisms For Two And Three Position Motion Generation, Ramanujam Thiruvenkatachari

Mechanical & Aerospace Engineering Theses & Dissertations

Four-bar mechanisms are widely used in the industry to solve a variety of motion problems. Till recently, their design was based on fundamental kinematics and brute force techniques, resulting in impractical designs and spurious linkages that failed to perform their desired functions effectively.

Procedures have been developed and implemented to guide the rigid body of crank driven four-bar linkages, through a set of design positions with techniques to avoid their defects. However, the practical applications of linkages used in the industry are coupler driven, with primitive synthesis procedures based on trial and error. The opening and closing of the hood …

Numerical Prediction Of Turbulent Diffusion Flames Formed By Cylindrical Tube Injector, Ali S. Kheireddine

Mechanical & Aerospace Engineering Theses & Dissertations

This work summarizes numerical results for a diffusion flame formed from a cylindrical tube fuel injector, issuing gaseous fuel jet vertically in a quiescent atmosphere. Both pure fuels as well as fuel mixtures are examined. The primary objective is to predict the flame base height as a function of the jet velocity. A finite volume scheme is used to discretize the time-averaged Navier-Stokes equations for the reacting flow, resulting from the turbulent fuel jet motion. The turbulent stresses, and heat and mass fluxes are computed from the Reynolds stress turbulence model. A chemical kinetics model involving a two-step chemical reaction …

A Progressive Damage Methodology For Residual Strength Predictions Of Center-Crack Tension Composite Panels, Timothy William Coats

Mechanical & Aerospace Engineering Theses & Dissertations

An investigation of translaminate fracture and a progressive damage methodology was conducted to evaluate and develop residual strength prediction capability for laminated composites with through penetration notches. This is relevant to the damage tolerance of an aircraft fuselage that might suffer an in-flight accident such as an uncontained engine failure. An experimental characterization of several composite materials systems revealed an R-curve type of behavior. Fractographic examinations led to the postulate that this crack growth resistance could be due to fiber bridging, defined here as fractured fibers of one ply bridged by intact fibers of an adjacent ply.

The progressive damage …

Reaction Based Grasp Force Assignment, Mark W. Hunter

Theses and Dissertations

An iterative method is developed by which the contact forces required to apply an arbitrary wrench (six elements of force and moment) to a stably grasped object may be calculated quickly. The assignment of contact forces, given a required object wrench, is accomplished with the use of fuzzy logic. This concept is referred to as the fuzzy logic reactive system (FLRS). The solution is versatile with respect to goals inherent in the rulebase and the input parameters, and is also applicable for an arbitrary number of contacts. The goal presented in this research, to illustrate the concept of the FLRS, …

Laboratory Development For Mechatronics Education, Burford Furman, T. Hsu, Freidoon Barez, A. Tesfaye, J. Wang, P. Hsu, P. Reischl

Faculty Publications, Mechanical Engineering

This paper presents the strategy for developing the “Mechatronic Engineering Laboratory” at the authors’ university. The laboratory development was a principal part of an award for “Undergraduate Curriculum Development on Mechatronic Systems Engineering” by the Division of Undergraduate Education of the National Science Foundation (NSF). Major tasks involved in the award include the development and implementation of five new courses and a new laboratory. The purpose of the new laboratory is to support instruction of two of the five new courses: ME 105 Fundamentals of Mechatronic Systems Engineering and ME 190 Electromechanical Systems and Microprocessor Applications.

Microstructure And Deposition Rate Of Aluminum Thin Films From Chemical Vapor Deposition With Dimethylethylamine Alane, Byoung-Youp Kim, Xiaodong Li, Shi-Woo Rhee

Faculty Publications

Deposition of aluminumfilm from DMEAA in the temperature range of 100–300 °C has been studied. In this temperature range, there is a maximum deposition rate at around 150 °C. The film deposited at 190 °C has elongated blocklike grain shapes, which are ∼600 nm in width and 930 nm in length. Grains in the film deposited at 150 °C showed an equiaxed structure with grain size in the range of 100–300 nm in a film with 600 nm thickness. Aluminum oxide particle inclusion was observed especially at high deposition temperature. Plausible reaction pathways of DMEAA dissociation were suggested to explain …

Demonstration Of Cooling Savings Of Light Colored Roof Surfacing In Florida Commercial Buildings: Our Savior's School, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

Architects and designers have long known that light-colored building roofs can reduce cooling needs. Recently, monitoring studies in Florida have made an effort to quantify these savings. Experiments in existing residences have shown that a white reflective roof can reduce cooling requirements by an average of 20%. However, until now there has been no investigation in Florida's climate to examine the potential in commercial scale buildings.

To remedy this need, a two year study was performed on a private elementary school building in Cocoa Beach, Florida. Our Savior's Elementary School was monitored for an entire year in a base line …

Modeling Of Macroscopic/Microscopic Transport Phenomena In Zeolite Crystal Solutions Under Microgravity Conditions, Andreas Alexandrou, Nikos A. Gatsonis, William W. Durgin, Albert Sacco, Jr.

Office of the Provost Scholarship

Crystals grown from special liquid solutions find important industrial applications. Most often the physics and chemistry of the growth processes are not well understood due to complex microscopic chemical and thermo-fluid phenomena. Microgravity could help elucidate these phenomena and allow the control of defect concentration and crystal size. We are proposing to study zeolites grown in silica solutions as a typical crystal growth system. By using macroscopic fluid dynamics, coupled with first-principle microscopic fluid physics and advanced particle simulations, we will study: (a) the effect of transport phenomena and nutrient flow under microgravity conditions along with (b) the nucleation process …

Results From A Comprehensive Residential Lighting Retrofit. 09-96, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

A single family residence in Miami, Florida was used as a case study to determine how residential lighting energy use could be reduced by substituting energy efficient lamps and fixtures. The three person household was chosen based both on its high utility bills and extensive use of interior lighting. A detailed audit revealed 40 lamps or bulbs on 26 controls (switches) with a total connected load of 2.5 kW.

All major energy using appliances in the home were sub-metered so that lighting and other plug loads could be differenced from the measured total power demand. Also, each of the individual …

Flastar: Florida Alliance For Saving Taxes And Energy Resources. Final Report., Florida Solar Energy Center, John Sherwin

FSEC Energy Research Center®

This document comprises the final project report in supporting the demonstration of the pilot Florida Public Building Loan Concept. This loan program provides low cost funds to eligible public entities for upgrade of building energy systems. The FLASTAR program (Florida Alliance for Saving Taxes And Resources) was modeled after the successful Texas LoanSTAR project [1, 2]. Within that program, funds provided from oil overcharges are loaned to various facilities for building system retrofits. These loans are repaid (with interest) from energy cost savings. As of the most recent reporting, the LoanSTAR program had saved the State of Texas some $13.7 …

Top Gear Manufacturing, B Mahadevan

IIMB Management Review

No abstract provided.

Simultaneous Composite Tailoring And Bending Control Optimization For Damping The Torsional Vibration Of A Plate, Douglas W. Dehart

Theses and Dissertations

A method for the simultaneous structural and control optimization for torsional vibration of a composite plate which simulates a spacecraft solar array structure was developed in this study. Included in the optimization of the plate are the location of the piezoceramic actuators and sensors that provide bending/torsion actuation, the control gains, and the orientation of the graphite fibers in the composite plies. This research included the effects of using composite tailoring to promote the coupling of the twisting-bending mode to enhance the damping system. The plate was modeled by classical lamination plate theory using a linear elastic strain-displacement theory. This …