Mechanical Engineering Commons^™

Integration Of Massive Multiplayer Online Role-Playing Games Client-Server Architectures With Collaborative Multi-User Engineering Cax Tools, Joshua D. Winn

Theses and Dissertations

This research presents a new method for integrating client server architectures that are used for the development of Massive Online Role Playing Games (MMORPG) into multi-user engineering software tools. The new method creates a new architecture named CAx Connect by changing the client-pull-server communication pipeline to a server-push-client communication pipeline, effectively reducing the amount of bandwidth consumed and allowing these tools to utilize multiple server processors for complex calculations. This method was used on the new NX Connect multi-user CAx prototype developed at BYU. The new method provides a road map to further implement this architecture and its services into …

The Influence Of Nozzle Spacing And Diameter On The Acoustic Emissions Of Closely Spaced Supersonic Jet Arrays, Ian S. Coltrin

Theses and Dissertations

The acoustic emissions from supersonic jets represent an area of significant research needs; not only in the field of aero-acoustics, but in industry as well where high pressure let down processes have been known to cause acoustically induced vibrations. A common method to reduce the acoustic emissions of such processes involves dividing the single larger supersonic flow into several smaller ones. Though this is common practice, there is not yet a current model which describes the reduction of acoustic emissions from an array of smaller supersonic jets. Current research which studies supersonic jet arrays are mainly focused on the effects …

Characterization And Biomechanical Analysis Of The Human Lumbar Spine With In Vitro Testing Conditions, Dean K. Stolworthy

Theses and Dissertations

Biomechanical testing of cadaveric spinal segments forms the basis for our current understanding of healthy, pathological, and surgically treated spinal function. Over the past 40 years there has been a substantial amount of data published based on a spinal biomechanical testing regimen known as the flexibility method. This data has provided valuable clinical insights that have shaped our understanding of low back pain and its treatments. Virtually all previous lumbar spinal flexibility testing has been performed at room temperature, under very low motion rates, without the presence of a compressive follower-load to simulate upper body weight and the action of …

Biomechanical Implications Of Lumbar Spinal Ligament Transectiona Finite Element Study, Gregory Allen Von Forell

Theses and Dissertations

The purpose of this work was to determine the possible effects of isolated spinal ligament transection on the biomechanics of the lumbar spine. A finite element model of a lumbar spine was developed and validated against experimental data. The model was tested in the primary modes of spinal motion in the intact condition, followed by comparative analysis of isolated removal of each spinal ligament. Results showed that stress increased in the remaining ligaments once a ligament was removed, potentially leading to ligament damage. Results also showed changes in bone remodeling "stimulus" which could lead to changes in bone density. Isolated …

A Comparative Evaluation Of An Educational Program Designed To Enable Mechanical Engineering Students To Develop Global Competence, Aaron Gerald Ball

Theses and Dissertations

The 'flattening of the world', using Thomas Friedman's phraseology, is driving corporations to increasingly use collaborative engineering processes and global teams to operate on a global scale. Globalization of the traditional university engineering curriculum is necessary to help students prepare to work in a global environment. More scalable and economically sustainable program types are needed to enable the majority of students to obtain a globalized education. The purpose of this research was to determine how effectively a global team- and project-based computer aided engineering course provided learning opportunities that enabled students to develop elements of global competence in comparison to …

Detail Extraction From Electron Backscatter Diffraction Patterns, John A. Basinger

Theses and Dissertations

Cross-correlation based analysis of electron backscatter diffraction (EBSD) patterns and the use of simulated reference patterns has opened up entirely new avenues of insight into local lattice properties within EBSD scans. The benefits of accessing new levels of orientation resolution and multiple types of previously inaccessible data measures are accompanied with new challenges in characterizing microscope geometry and other error previously ignored in EBSD systems. The foremost of these challenges, when using simulated patterns in high resolution EBSD (HR-EBSD), is the determination of pattern center (the location on the sample from which the EBSD pattern originated) with sufficient accuracy to …

Model Decomposition And Constraints To Parametrically Partition Design Space In A Collaborative Cax Environment, Felicia Diane Marshall

Theses and Dissertations

An industry survey was conducted to collect information on current collaboration methods and project management and communication structures. The results, along with other design collaboration philosophies, were used to develop a method of coordinating users in a multi-user design space. These thesis methods will regulate collaboration and avoid user collisions in the same model space, either by cooperative interaction or by spatial decomposition with regional blocking. The method partitions the design space by integrating a graphical user interface tool into the engineering application used to define and assign the necessary tasks of the project. A simple implementation of this method …

Investigation Of Selected Complexes And Alloys For Use In Hydrogen Storage And Related Applications, Michael Joseph Wolverton

Theses and Dissertations

The storage of hydrogen in adequate amounts limits its practical application as a fuel. This is especially important for automotive applications. Metal hydride based storage systems may yet be able to meet these storage parameters. However, no ideal hydride system has yet been identified. This work explores methods of increasing the feasibility of metal hydride based hydrogen storage by: (1) improvement of hydrogen uptake/release in known hydrides through catalysis, and (2) characterization of new hydrides and hydrogen storage materials. Catalysis work concerns primarily borohydrides due to their large hydrogen content. Catalysis and destabilization of borohydrides by addition of bulk alloy …

Influence Of Supraglottal Geometry And Modeling Choices On The Flow-Induced Vibration Of A Computational Vocal Fold Model, Timothy E. Shurtz

Theses and Dissertations

Computational models of the flow-induced vibrations of the vocal folds are powerful tools that can be used in conjunction with physical experiments to better understand voice production. This thesis research has been performed to contribute to the understanding of vocal fold dynamics as well as several aspects of computational modeling of the vocal folds. In particular, the effects of supraglottal geometry have been analyzed using a computational model of the vocal folds and laryngeal airway. In addition, three important computational modeling parameters (contact line location, Poisson's ratio, and symmetry assumptions) have been systematically varied to determine their influence on model …

Microstructural Evaluation In Friction Stir Welded High Strength Low Alloy Steels, Majid Abbasi Gharacheh

Theses and Dissertations

Understanding microstructural evolution in Friction Stir Welding (FSW) of steels is essential in order to understand and optimize the process. Ferritic steels undergo an allotropic phase transformation. This makes microstructural evolution study very challenging. An approach based on Electron Backscattered Diffraction (EBSD) and phase transformation orientation relationships is introduced to reconstruct pre-transformed grain structure and texture. Reconstructed pre-transformed and post-transformed grain structures and textures were investigated in order to understand microstructural evolution. Texture results show that there is evidence of shear deformation as well as recrystallization in the reconstructed prior austenite. Room temperature ferrite exhibits well-defined shear deformation texture components. …

Aerial Rendezvous Between An Unmanned Air Vehicle And An Orbiting Target Vehicle, Mark Andrew Owen

Theses and Dissertations

In this thesis we develop methods that facilitate an aerial rendezvous between two air vehicles. The objective of this research is to produce a method that can be used to insert a miniature air vehicle behind a rendezvous vehicle and then track that vehicle to enable a visual rendezvous. For this research we assume the rendezvous vehicle is following a relatively stable and roughly elliptical orbit. Path planners and controllers have been developed that can be used to effectively intercept the rendezvous vehicle by inserting the MAV onto the orbit of interest. A method for planning and following time-optimal Dubins …

Automated Flow Path Design Optimization Using Mesh Morphing, William Dennis Gough

Theses and Dissertations

The use of CAD models and CFD analysis has become an essential part of fluid flow design. To reduce the time spent determining a design, optimization frameworks have been implemented to automate the process. Mesh morphing has been implemented within these frameworks to further reduce the time needed. While optimization methods have been developed to optimize a fluid flow path, the optimum design needs to be recreated in a CAD model. A method has been developed which eliminates the need to recreate the optimal results in CAD. This is accomplished by using mesh morphing, CAD and CFD together in an …

Toward The Design Of A Statically Balanced Fully Compliant Joint For Use In Haptic Interfaces, Levi Clifford Leishman

Theses and Dissertations

Haptic interfaces are robotic force-feedback devices that give the user a sense of touch as they interact with virtual or remote environments. These interfaces act as input devices, mapping the 3-dimensional (3D) motions of the user's hand into 3D motions in a slave system or simulated virtual world. A major challenge in haptic interfaces is ensuring that the user's experience is a realistic depiction of the simulated environment. This requires the interface's design to be such that it does not hinder the user's ability to feel the forces present in the environment. This "transparency" is achieved by minimizing the device's …

Microstructure Evolution In 304l Stainless Steel Subjected To Hot Torsion At Elevated Temperature, Jian Lu

Theses and Dissertations

The current study focus on investigating a relationship between processing variables and microstructure evolution mechanism in 304L stainless steel subjected to hot torsion. The Gleeble 3800 with Mobile Torsion Unit (MTU) is utilized in the current study to conduct hot torsion test of 304L stainless steel. Samples are rotated at 1100℃ in the shear strain rate range of 0.02s-1 to 4.70s-1 and the shear strain range of 0.5 to 4. Orientation imaging microscopy (OIM) technique is used to collect and analyze the microstructure. At low strains (≤1) and strain rate (0.02s-1), average grain size remains relatively constant, but the lengths …

Expanding Lamina Emergent Mechanism (Lem) Capabilities: Spherical Lems, Lem Joints, And Lem Applications, Samuel E. Wilding

Theses and Dissertations

Lamina Emergent Mechanisms (LEMs) are a class of compliant mechanisms that can be manufactured from sheet goods and possess motion out of the plane of fabrication. LEMs can be designed to perform sophisticated motions. This thesis expands LEM understanding and increases the ability to utilize them in applications by introducing the fundamentals of spherical LEMs, creating joints suitable for LEMs, and providing an example of a LEM application. In this thesis, the fundamentals of spherical LEMs are developed. This includes classification of all possible spherical 4R LEMs and a discussion of the motion characteristics of the various mechanisms. The motion …

Analytical Comparison Of Multimicrophone Probes In Measuring Acoustic Intensity, Curtis P. Wiederhold

Theses and Dissertations

In the late 1970s, a method was developed to estimate acoustic intensity in one dimension by taking the cross-spectral density of two closely-spaced microphone signals. Since then, multimicrophone probes have been developed to measure three-dimensional intensity as well as energy density. Their usefulness has led to the design of various types of multimicrophone probes, the most common being the four-microphone orthogonal, the four-microphone regular tetrahedron, and the six-microphone designs. These designs generally either consist of microphones suspended in space near each other or mounted on the surface of a sphere. This work analytically compares the relative merits of each probe …

Influence Of Subglottic Geometry On Computational And Synthetic Vocal Fold Model Vibration, Simeon L. Smith

Theses and Dissertations

The voice plays a vital role in human communication. The purpose of voice research is to advance the understanding of voice production physics, with the ultimate goal of leading to improved voice care. In this research computational and synthetic vocal fold models were used to explore the role of subglottal geometry in vocal fold vibration. Three specific studies were performed. First, the effect of the inferior vocal fold surface angle on voice production was investigated using a two-dimensional self-oscillating finite element vocal fold model. Varying the inferior angle resulted in significant changes to model vibratory motion, glottal width, flow rate, …

Smb-Interp: An N-Th Order Accurate, Distributed Interpolation Library, Stephen Mardson Mcquay

Theses and Dissertations

The research contained herein yielded an open source interpolation library implemented in and designed for use with the Python programming language. This library, named smbinterp, provides an interpolation to an arbitrary degree of accuracy. The library is parametric in that is can take input from the user to adjust the underlying interpolation mechanism. The characteristics and behavior of the library according to the adjustment of these parameters is presented herein, as well as the results of a mesh resolution study depicting the accuracy obtained by the library. The smbinterp library was designed with parallel computing environments in mind. The library …

Flow-Induced Responses Of Normal, Bowed, And Augmented Synthetic Vocal Fold Models, Preston Roylance Murray

Theses and Dissertations

The voice is the primary mode of communication for humans. Because the voice is so important, voice disorders tend to severely diminish quality of life. A better understanding of the physics of voice production can help to improve treatment of voice disorders. For this thesis research a self-oscillating synthetic vocal fold model was developed, compared with previous synthetic vocal fold models, and used to explore the physical effects of augmentation injections on vibration dynamics. The research was conducted in two stages. First, four vocal fold models were evaluated by quantifying onset pressure, frequency, maximum glottal gap, flow rate, and medial …

Collaborative Products: A Design Methodology With Application To Engineering-Based Poverty Alleviation, Jacob S. Morrise

Theses and Dissertations

Collaborative products are created when physical components from two or more products are temporarily recombined to form another product capable of performing entirely new tasks. The method for designing collaborative products is useful in developing products with reduced cost, weight, and size. These reductions are valued in the developing world because collaborative products have a favorable task-per-cost ratio. In this paper, a method for designing collaborative products is introduced. The method identifies a set of products capable of being recombined into a collaborative product. These products are then designed to allow for this recombination. Three examples are provided to illustrate …

Efficient, Accurate, And Non-Gaussian Error Propagation Through Nonlinear, Closed-Form, Analytical System Models, Travis V. Anderson

Theses and Dissertations

Uncertainty analysis is an important part of system design. The formula for error propagation through a system model that is most-often cited in literature is based on a first-order Taylor series. This formula makes several important assumptions and has several important limitations that are often ignored. This thesis explores these assumptions and addresses two of the major limitations. First, the results obtained from propagating error through nonlinear systems can be wrong by one or more orders of magnitude, due to the linearization inherent in a first-order Taylor series. This thesis presents a method for overcoming that inaccuracy that is capable …

Direct Numerical Simulation Of Transonic Wake Flow In The Presence Of An Adverse Pressure Gradient And Streamline Curvature, Jeffrey Reed Gibson

Theses and Dissertations

Wakes are present in many engineering flows. These flows include internal flows such as mixing chambers and turbomachinery as well as external flows like flow over high-lift or multi-element airfoils. Many times these wakes are exposed to flow conditions such as adverse pressure gradients and streamline curvature that alter the mean flow and turbulent structure of the wake. The ability to understand how pressure gradients and streamline curvature affects the structure of the wake is essential to predicting how the wake will affect the performance of the application in which it is found. The effects of pressure gradients and curvature …

Design And Analysis Of A Flapping Wing Mechanism For Optimization, Ryan Brandon George

Theses and Dissertations

Furthering our understanding of the physics of flapping flight has the potential to benefit the field of micro air vehicles. Advancements in micro air vehicles can benefit applications such as surveillance, reconnaissance, and search and rescue. In this research, flapping kinematics of a ladybug was explored using a direct linear transformation. A flapping mechanism design is presented that was capable of executing ladybug or other species-specific kinematics. The mechanism was based on a differential gear design, had two wings, and could flap in harsh environments. This mechanism served as a test bed for force analysis and optimization studies. The first …

Automated Multidisciplinary Optimizations Of Conceptual Rocket Fairings, Ronald S. Smart

Theses and Dissertations

The purpose of this research is to develop and architect a preliminary multidisciplinary design optimization (MDO) tool that creates multiple types of generalized rocket fairing models. These models are sized relative to input geometric models and are analyzed and optimized, taking into account the primary objectives, namely the structural, thermal, and aerodynamic aspects of standard rocket flights. A variety of standard nose cone shapes is used as optimization proof of concept examples, being sized and compared to determine optimal choices based on the input specifications, such as the rocket body geometry and the specified trajectory paths. Any input models can …

Analytical Modeling And Optimization Of A Thermoelectric Heat Conversion System Operating Betweeen Fluid Streams, Stephen H. Taylor

Theses and Dissertations

Analytical, closed-form solutions governing thermoelectric behavior are derived. An analytical model utilizing a thermal circuit is presented involving heat transfer into, through, out of, and around a thermoelectric device. A nondimensionalization of the model is presented. Linear heat transfer theory is applied to the model to obtain a series of closed form equations predicting net power output for the thermoelectric device. Fluid streams flowing through shrouded heat sinks with square pin fins are considered for the thermal pathways to and from the device. Heat transfer and pressure drop are characterized in a manner conducive to an analytical model using previously …

Spinal Implant With Customized And Non-Linear Stiffness, Eric Ray Dodgen

Theses and Dissertations

There is a need for spinal implants that have nonlinear stiffness to provide stabilization if the spine loses stiffness through injury, degeneration, or surgery. There is also a need for spinal implants to be customizable for individual needs, and to be small enough to be unobtrusive once implanted. Past and ongoing work that defines the effects of degeneration on the torque rotation curve of a functional spinal unit (FSU) were used to produce a spinal implant which could meet these requirements. This thesis proposes contact-aided inserts to be used with the FlexSuRe™ spinal implant to create a nonlinear stiffness. Moreover, …

Mechanical Characterization Of The Interspinous Ligament Using Anisotropic Small Punch Testing, Rachel Jane Bradshaw

Theses and Dissertations

Objective: The objective of this work was to characterize the nonlinear anisotropic material constitutive response of the interspinous ligament (ISL).

Methods: Cadaveric test samples of the interspinous ligament were tested using the anisotropic small punch test. The measured force-displacement response served as experimental input into a system identification optimization routine to determine the constitutive material parameters that replicated the measured material response.

Results: The constitutive behavior of the ISL is notably different from that reported for knee, shoulder, and hip ligaments. Specifically, the high collagen fiber content and unique collagen architecture provided a stiffer material response. The results from the …

Characterization Of The Mechanical Response Of The Lumbar Spine, Shannon Alisa Zirbel

Theses and Dissertations

The primary objective of this research is to associate lumbar segmental mechanical response with intervertebral disc degeneration under physiologic testing conditions. Because no mathematical model exists for lumbar spine segmental rotations, a portion of this thesis evaluates potential methods for curve fitting the torque-rotation curves. The Dual Inflection Point (DIP) Boltzmann equation was developed during the course of this research and is presented here as a method for fitting spinal motion data wherein a physical meaning can be assigned to each of the model coefficients. This model can tell us more about the effects of degeneration, testing conditions, and other …

Devices And Methods For Electro-Physical Transport Of Dna Across Cell Membranes, Quentin Theodore Aten

Theses and Dissertations

A novel method for charged macromolecule delivery, called nanoinjection, has been developed at Brigham Young University. Nanoinjection combines micro-fabrication technology, mechanism design, and nano-scale electrical phenomenon to transport exogenous DNA across cell membranes on a nano-featured lance. DNA is electrically accumulated on the lance, precision movements of microelectromechanical systems (MEMS) physically insert the lance into cell, and DNA is electrically released from the lance into the cell. Penetration into the cell is achieved through a two-phase, self-reconfiguring metamorphic mechanism. The surface-micromachined, metamorphic nanoinjector mechanism elevates the lance above the fabrication substrate, then translates in-plane at a constant height as the …

An Evaluation Of Constitutive Laws And Their Ability To Predict Flow Stress Over Large Variations In Temperature, Strain, And Strain Rate Characteristic Of Friction Stir Welding, Katherine Lynn Kuykendall

Theses and Dissertations

Constitutive laws commonly used to model friction stir welding have been evaluated, both qualitatively and quantitatively, and a new application of a constitutive law which can be extended to materials commonly used in FSW is presented. Existing constitutive laws have been classified as path-dependent or path-independent. Path-independent laws have been further classified according to the physical phenomena they capture: strain hardening, strain rate hardening, and/or thermal softening. Path-dependent laws can track gradients in temperature and strain rate characteristic to friction stir welding; however, path-independent laws cannot. None of the path-independent constitutive laws evaluated has been validated over the full range …