Mechanical Engineering Commons^™

High Fidelity Time Accurate Cfd Analysis Of A Multi-Stage Turbofan At Various Operating Points In Distorted Inflow, David Bruce Weston

Theses and Dissertations

Inlet distortion is an important consideration in fan performance. Distortion can be caused through flight conditions and airframe-engine interfaces. The focus of this paper is a series of high-fidelity time accurate Computational Fluid Dynamics (CFD) simulations of a multistage fan. These investigate distortion transfer and generation as well as the underlying flow physics of these phenomena under different operating conditions. The simulations are performed on the full annulus of a 3 stage fan. The code used to carry out these simulations is a modified version of OVERFLOW 2.2 developed as part of the Computational Research and Engineering Acquisition Tools and …

Aerodynamic Improvements For Auto-Carrying Railcars, Robert Arthur Condie

Theses and Dissertations

The railroad industry is responsible for the mass transport of a vast numbers of goods throughout the United States. As needs and capabilities of the railroad industry have changed, the interest in reducing the resistance of locomotives and railcars has increased. This has become paramount as fuel prices have increased in recent years. Resistant forces can result from friction in mechanical components and aerodynamic drag of the moving train. As the average traveling speeds of trains have increased, aerodynamics are contributing a larger fraction of the overall resistance. For this reason, the aerodynamic profiles of trains have become a topic …

Microstructure Design And Experimental Characterization Of Functional Elastic Metamaterials, Rui Zhu

Theses and Dissertations

Elastic metamaterials are of growing interest due to their dramatically increased manipulation ability as well as their novel engineering applications. The purpose of this research is to develop and model elastic metamaterials with unusual effective properties and their applications in low frequency elastic wave attenuation and vibration suppression. The working principle of the elastic metamaterials is to use man-made microstructures, local resonators, on a scale much less than its working wavelength. Therefore it is possible to describe their response by using dispersive homogenized effective media. First, we developed a retrieval method to obtain effective material properties of the metamaterial and …

Design And Experimental Testing Of Nanoinjection Protocols For Delivering Molecules Into Hela Cells With A Bio-Mems Device, Zachary Kendall Lindstrom

Theses and Dissertations

Delivering foreign molecules into living cells is a broad and ongoing area of research. Gene therapy, or delivering nucleic acids into cells via non-viral or viral pathways, is an especially promising area for pharmaceutics. All gene therapy methods have their respective advantages and disadvantages, including limited delivery efficiency and low viability. Nanoinjection, or delivering molecules into cells using a solid lance, has proven to be highly efficient while maintaining high viability levels. In this thesis, an array of solid silicon lances was tested by nanoinjecting tens of thousands of HeLa cancer cells simultaneously. Several molecule types were injected in different …

An Experimental Study Of Bio-Inspired Force Generation By Unsteady Flow Features, Wesley N. Fassmann

Theses and Dissertations

As the understanding of the workings of the biological world expands, biomimetic designs increasingly move into the focus of engineering research studies. For this thesis, two studiesinvolving leading edge vortex generation for lift production as observed in nature were explored intheir respective flow regimes. The first study focused on the steady state analysis of streamwise vortices generated byleading edge tubercles of an adult humpback whale flipper. A realistic scaled model of a humpbackflipper was fabricated based on the 3D reconstruction from a sequence of 18 images taken whilecircumscribing an excised flipper of a beached humpback whale. Two complementary modelswith smooth …

Biomechanical Applications And Modeling Of Quantum Nano-Composite Strain Gauges, Taylor David Remington

Theses and Dissertations

Biological tissues routinely experience large strains and undergo large deformations during normal physiologic activity. Biological tissue deformation is well beyond the range of standard strain gauges, and hence must often be captured using expensive and non-portable options such as optical marker tracking methods that may rely upon significant post-processing. This study develops portable gauges that operate in real time and are compatible with the large strains seen by biological materials. The new gauges are based on a relatively new technique for quantifying large strain in real-time (up to 40 %) by use of a piezoresistive nano-composite strain gauge. The nano-composite …

Operational Characteristics Of An Ultra Compact Combustor, Christopher J. Damele

Theses and Dissertations

Ultra Compact Combustors offer unique solutions to minimize engine size and weight. They accomplish this by reducing the number of components in the engine core and perform the combustion in a circumferential cavity that encircles the core flow. Within this cavity, the fuel is injected rich. Burning continues to occur in the vane passage beneath the circumferential cavity which must be completed in a controlled manner prior to the inlet plane of the turbine rotor. Furthermore, the temperature distribution at the exit of the vane passage must be controlled to generate high work extraction from the turbine. The primary metrics …

Development Of A Detonation Diffuser, Christopher A. Stevens

Theses and Dissertations

This research includes an investigation of the mechanisms of diffraction and reinitiation that enable a detonation diffuser. It describes a set of geometric parameters necessary to design a diffuser for a given detonable mixture and initial channel height. Predetonators with channel height less than the critical height are ineffective because detonations in small channels decouple into separate shock and combustion fronts when the channel height increases. A detonation diffuser allows the channel height to increase by utilizing the decoupled shock wave to reinitiate detonation. In the diffuser, a detonation initially decouples into separate shock and combustion fronts, and then the …

U-Pu-Zr Alloy Design By Ternary Potts-Phase Field Modeling, Jordan Jeffrey Cox

Theses and Dissertations

U-Pu-Zr nuclear fuels experience a redistribution of constituents and a number of phase transformations when subjected to the thermal gradient present in nuclear reactors. This redistribution and phase separation leads to several undesirable fuel performance issues. In an effort to better understand how different alloys compositions are affected by this thermal gradient, we utilize the recently introduced Hybrid Potts-phase Field Method to study the U-Pu-Zr system. The recently introduced Hybrid method couples microstructural and compositional evolutions of a system so that the two phenomena can be studied together rather than separately, as is frequently done. However, simulation of the U-Pu-Zr …

Development Of Tailsitter Hover Estimation And Control, Jason M. Beach

Theses and Dissertations

UAVs have become an essential tool in many market segments, particularly the military where critical intelligence can be gathered by them. A tailsitter aircraft is a platform whose purpose is to efficiently merge the range and endurance of fixed-wing aircraft with the VTOL capabilities of rotorcraft and is of significant value in applications where launch and recovery area is limited or the use of launch and recovery equipment is not desirable. Developing autopilot software for a tailsitter UAV is unique in that the aircraft must be autonomously controlled over a much wider range of attitudes than conventional UAVs. Assumptions made …

Analysis And Modeling Of The Roles Of Actin-Myosin Interactions In Bladder Smooth Muscle Biomechanics, Seyed Omid Komariza

Theses and Dissertations

Muscle mechanical behavior potentially plays an important role in some of the most common bladder disorders. These include overactive bladder, which can involve involuntary contractions during bladder filling, and impaired contractility or underactive bladder, which may involve weak or incomplete contractions during voiding. Actin-myosin cross-bridges in detrusor smooth muscle (DSM) are responsible for contracting and emptying the bladder. The total tension produced by muscle is the sum of its preload and active tensions. Studies suggest that actin-myosin cross-links are involved in adjustable preload stiffness (APS), which is characterized by a preload tension curve that can be shifted along the length …

Modeling Acute Changes In Bladder Wall Tension, Shape And Compliance During Filling, Firdaweke Habteyes

Theses and Dissertations

The bladder wall consists primarily of detrusor smooth muscle. Tension-sensitive nerves in the bladder wall are responsible for providing bladder fullness information that is interpreted as urgency. Bladder wall tension, and therefore nerve output, is a function of bladder volume, shape and material properties. Studies have shown that the bladder wall exhibits acutely regulated detrusor compliance. In addition, bladder shape throughout filling depends on intra-abdominal forces and material properties of the bladder wall, such as regulated detrusor compliance. This thesis focused on modeling the potential influence of acute changes in bladder compliance, shape and bladder wall tension during filling. Laplace’s …

Classification Of Low Velocity Impactors Using Spiral Sensing Of Acousto-Ultrasonic Waves, Chijioke Agbasi

Theses and Dissertations

The non-linear elastodynamics of a flat plate subjected to low velocity foreign body impacts is studied, resembling the space debris impacts on the space structure. The work is based on a central hypothesis that in addition to identifying the impact locations, the material properties of the foreign objects can also be classified using acousto-ultrasonic signals (AUS). Simultaneous localization of impact point and classification of impact object is quite challenging using existing state-of-the-art structural health monitoring (SHM) approaches. Available techniques seek to report the exact location of impact on the structure, however, the reported information is likely to have errors from …

Optimal Design Of Geothermal Power Plants, Joshua Clarke

Theses and Dissertations

The optimal design of geothermal power plants across the entire spectrum of meaningful geothermal brine temperatures and climates is investigated, while accounting for vital real-world constraints that are typically ignored in the existing literature. The constrained design space of both double-flash and binary geothermal power plants is visualized, and it is seen that inclusion of real-world constraints is vital to determining the optimal feasible design of a geothermal power plant. The effect of varying condenser temperature on optimum plant performance and optimal design specifications is analyzed. It is shown that condenser temperature has a significant effect on optimal plant design …

A Practical Tool For The Determination Of Surface Stresses In Railroad Bearings With Different Contact Geometries And Load Conditions Using Finite Element Analysis, Michael A. Mason

Theses and Dissertations

The connection between contact geometry and fatigue in tapered roller bearings utilized in the railroad environment is still of interest. Roller bearings for railroad applications are typically precision ground with crowned contact geometries to prevent edge loading of components. This normally results in completely elastic Hertzian contact stresses under standard railcar loads. However, under extreme load conditions, detrimental edge loading has been known to occur. It is proposed to develop a tool, using finite element analysis, that can be utilized to optimize complex raceway crown geometries for severe applications.

A successful implementation of this tool is presented and validated using …

Early Prediction Of Fracture In Bodies Bounded By Random Rough Surfaces, Hector Medina

Theses and Dissertations

Under certain loading conditions, surfaces topography coupled with materials degree of brittleness can significantly compromise the mechanical performance of structures. The foregoing remains valid even if roughness is intentionally introduced for engineering reasons. In either case, stress can concentrate. The case of the stress concentration in surfaces having randomly distributed pits is a problem that, although being very practical, yet it remains unsolved. The complexity of a random configuration renders difficult the problem of analytically finding relationships between surface parameters and markers indicative of mechanical failure. Another difficulty is the reproducibility of replicates of specimens possessing random rough surfaces, for …

Modeling Of Chemical-Mechanical Couplings In Solid Oxide Cells And Reliability Analysis, Xinfang Jin

Theses and Dissertations

Solid oxide fuel cell (SOFC) has been well demonstrated as a promising clean energy conversion technology. For practical applications, the SOFC systems should have both good electrochemical performance and high reliability. The SOFCs are usually operated under very aggressive conditions, e.g., high temperatures (600-1000oC) and extremely low oxygen partial pressures (anode electrode). These aggressive operating conditions could lead to a variety of material system degradations, imposing great challenges on meeting lifetime requirement of SOFC commercial applications. It is therefore essential to increase the understanding of fundamental SOFC degradation mechanisms.

The basic structure of SOFCs is a positive electrode-electrolyte-negative electrode (PEN) …

Material Synthesis And Fabrication Method Development For Intermediate Temperature Solid Oxide Fuel Cells, Hanping Ding

Theses and Dissertations

Solid oxide fuel cells (SOFCs) are operated in high temperature conditions (750-1000 oC). The high operating temperature in turn may lead to very complicated material degradation issues, significantly increasing the cost and reducing the durability of SOFC material systems. In order to widen material selections, reduce cost, and increase durability of SOFCs, there is a growing interest to develop intermediate temperature SOFCs (500-750 oC). However, lowering operating temperature will cause substantial increases of ohmic resistance of electrolyte and polarization resistance of electrodes. This dissertation aimed at developing high-performance intermediate-temperature SOFCs through the employment of a series of layered perovskite oxides …

Measuring The Effectiveness Of Education For Sustainable Development Interventions For Effecting Change In Knowledge, Attitude And Behaviors Toward Sustainable Development, Christopher Robin Wilson

Theses and Dissertations

The question addressed by this study is whether an intervention involving a brief, focused seminar providing Sustainability Fundamental education can affect change in sustainability-centric behavior via measured change in attitude toward sustainability and/or change knowledge of sustainability fundamentals.

This study focused on applying and extending lessons from a previous exploration of the relationships between sustainable behavior and both attitude toward sustainability and knowledge of sustainability. The test involved determining whether brief, science-based sustainability fundamentals seminars are an effective intervention for affecting the favorable sustainable behavior of practicing engineers, defined as professionals engaged in engineering post-completion of their formal studies, in …

Heat Transfer Enhancement By Three-Dimensional Surface Roughness Technique In Nuclear Fuel Rod Bundles, Kang Liu

Theses and Dissertations

DISS_abstract> This thesis investigate thermal characteristic of a single-phase nano-fluid in a single heater element loop tester and provides a comparison between heat transfer enhancement results achieved using water as a coolant and using nano-fluids with different volume percentage. The experimental investigation is performed on two simulated nuclear fuel rods with two different types of modified outer surfaces roughness. The fuel rod surfaces modified are termed as two-dimensional surface roughness (square transverse ribbed surface) and three-dimensional surface roughness (Diamond shaped blocks). The nano-fluid used are 0.5% and 2% ZnO-Deionized water based nano-fluid. The maximum heat transfer co-efficient enhancement achieved compared …

Capillarity And Two-Phase Fluid Transport In Media With Fibers Of Dissimilar Properties, Thomas M. Bucher Jr.

Theses and Dissertations

Capillarity is a physical phenomenon that acts as a driving force in the displacement of one fluid by another within a porous medium. This mechanism operates on the micro and nanoscale, and is responsible for countless observable events. This can include applications such as absorption in various hygiene products, self-cleaning surfaces such as water beading up and rolling off a specially-coated windshield, anti-icing, and water management in fuel cells, among many others.

The most significant research into capillarity has occurred within the last century or so. Traditional formulations for fluid absorption include the Lucas–Washburn model for porous media, which is …

Cfd Assessment Of Respiratory Drug Delivery Efficiency In Adults And Improvements Using Controlled Condensational Growth, Ross L. Walenga

Theses and Dissertations

Pharmaceutical aerosols provide a number of advantages for treating respiratory diseases that include targeting high doses directly to the lungs and reducing exposure of other organs to the medication, which improve effectiveness and minimize side effects. However, difficulties associated with aerosolized drug delivery to the lungs include drug losses in delivery devices and in the extrathoracic region of human upper airways. Intersubject variability of extrathoracic and thoracic drug deposition is a key issue as well and should be minimized. Improvements to respiratory drug delivery efficiency have been recently proposed by Dr. P. Worth Longest and Dr. Michael Hindle through the …

Molecular Dynamics Simulations Of Pure Polytetrafluoroethylene Near Glassy Transition Temperature For Different Molecular Weights, Rawan Al-Nsour

Theses and Dissertations

Fluoropolymers are employed in countless end-user applications across several industries. One such fluoropolymer is polytetrafluoroethylene. This research is concerned with studying and understanding the thermal behavior of polytetrafluoroethylene. Such understanding is critical to predict its behavior in diverse service environments as the polymer ages and for allowing bottom up design of improved polymers for specific applications.

While a plethora of experiments have investigated the thermal properties of polytetrafluoroethylene, examining these properties using molecular dynamics simulations remains in its infancy. In particular, the current body of molecular dynamics research on polytetrafluoroethylene has primarily focused on studying polytetrafluoroethylene phases, its physical nature, …

Mems Cantilever Sensor For Thz Photoacoustic Chemical Sensing And Spectroscopy, Nathan E. Glauvitz

Theses and Dissertations

Sensitive Microelectromechanical System (MEMS) cantilever designs were modeled, fabricated, and tested to measure the photoacoustic (PA) response of gasses to terahertz (THz) radiation. Surface and bulk micromachining technologies were employed to create the extremely sensitive devices that could detect very small changes in pressure. Fabricated devices were then tested in a custom made THz PA vacuum test chamber where the cantilever deflections caused by the photoacoustic effect were measured with a laser interferometer and iris beam clipped methods. The sensitive cantilever designs achieved a normalized noise equivalent absorption coefficient of 2.83x10^-10 cm^-1 W Hz^-1/2 using a 25 …

Fundamental Experimental Studies In Scaling, Blast Mitigation And Material Processing, Xing Zhao

Theses and Dissertations

In this work, two separate research efforts are discussed. They include experimental studies in (1) Scaling and Blast Mitigation and (2) Scaling in Friction Stir Extrusion. In both studies, the primary experimental measurement method is three-dimensional digital image correlation (3D-DIC), a non-contacting full-field measurement method that is applicable for both high-rate loading and quasi-static loading conditions.

Scaling and Blast Mitigation Studies:

A series of properly scaled structures was subjected to buried blast loading conditions via detonation of a small explosive buried in saturated sand. Using high speed stereo-vision systems to record the deformations of selected regions on the upper surface …

Effect Of Full-Annular Pressure Pulses On Axial Turbine Performance, Mark H. Fernelius

Theses and Dissertations

Pulse detonation engines show potential to increase the efficiency of conventional gas turbine engines if used in place of the steady combustor. However, since the interaction of pressure pulses with the turbine is not yet well understood, a rig was built to compare steady flow with pulsing flow. Compressed air is used in place of combustion gases and pressure pulses are created by rotating a ball valve with a motor. This work accomplishes two main objectives that are different from previous research in this area. First, steady flow through an axial turbine is compared with full annular pulsed flow closely …

An Experimental Analysis Of The Weighted Sum Of Spatial Gradients Minimization Quantity In Active Structural Acoustic Control Of Vibrating Plates, Daniel R. Hendricks

Theses and Dissertations

Active Structural Acoustic Control (ASAC) is a subcategory of the more widely known field of Active Noise control (ANC). ASAC is different from traditional ANC methods because it seeks to attenuate noise by altering the noise producing structure instead of altering the acoustic waves traveling through the air. The greatest challenge currently facing ASAC researchers is that a suitable parameter has not yet been discovered which can be easily implemented as the minimization quantity in the control algorithms. Many parameters have been tried but none effectively attenuate the sound radiation in a way that can be easily implemented. A new …

Computational And Experimental Study Of Degeneration, Damage And Failure In Biological Soft Tissues, Gregory Allen Von Forell

Theses and Dissertations

The purpose of this work was to analyze the biomechanics of degeneration, damage, and failure in biological soft tissues both experimentally and computationally to provide insight into tendon or ligament tearing, tendo-achilles lengthening and lumbar spine dysfunction. For soft tissue tearing, experimental studies for calculating fracture toughness were performed and determined that tendons and ligaments are able to completely resist tear propagation. For tendo-achilles lengthening, a damage model was developed to mimic the behavior of the lengthening that occurs as a result of the percutaneous triple hemisection technique. The model provided insight for predicting the amount of lengthening that occurs …

Active Structural Acoustic Control Of Clamped And Ribbed Plates, William Richard Johnson

Theses and Dissertations

A control metric, the weighted sum of spatial gradients (WSSG), has been developed for use in active structural acoustic control (ASAC). Previous development of WSSG [1] showed that it was an effective control metric on simply supported plates, while being simpler to measure than other control metrics, such as volume velocity. The purpose of the current work is to demonstrate that the previous research can be generalized to plates with a wider variety of boundary conditions and on less ideal plates. Two classes of plates have been considered: clamped flat plates, and ribbed plates. On clamped flat plates an analytical …

The Effects Of Wrist Orthoses On The Stiffness Of Wrist Rotations, Daniel Brad Seegmiller

Theses and Dissertations

Wrist orthoses are the most common upper limb orthoses, being used by thousands of individuals each year to stabilize, immobilize, or support the wrist joint. Wrist orthoses achieve their function by altering the stiffness of the wrist joint (Figure 1-1). However, there is no quantitative understanding of how wrist orthoses affect wrist stiffness, and consequently, wrist orthosis development often relies on feel, intuition, or empirical heuristics rather than a methodical, quantitative approach. Because wrist movement control is dominated by wrist joint stiffness (Charles and Hogan 2011) a quantitative understanding of how wrist orthoses alter the stiffness of the wrist is …