Mechanical Engineering Commons^™

Investigation On Flame Characteristics Of Oxy-Fuel Combustion, Md R. Islam

Open Access Theses & Dissertations

Oxy-fuel combustion is currently being considered by the U.S Department of Energy as a promising technology for efficient carbon capture. This technology could substantially reduce NOx and CO2 emissions. In addition, the implementation of oxy-fuel combustion technology in a power generation system could potentially reduce negative environmental impacts of fossil fuel use. It also encourages the use of reliable and domestic energy sources. The U.S. Department of Energy has made efforts to investigate the performance of a CO2 and H2O diluted oxy-fuel combustion system in a high-pressure combustor. In an effort to better understand and characterize the fundamental flame characteristics …

Experimental Investigation Of Magnesium/Regolith Combustion For In-Situ Production Of Materials On The Moon, Christopher White

Open Access Theses & Dissertations

Future settlements on the Moon will require that strong, cost-effective structural materials be developed in whole or in part from locally available resources. Such materials can be created in-situ from the lunar regolith using self-propagating high-temperature synthesis (SHS). By mixing the lunar regolith with metal additives, such as aluminum or magnesium, a combustible mixture is formed which, when ignited, can reach temperatures high enough to allow combustion to be self-sustaining, sintering the lunar regolith without further energy input and without the need for atmospheric oxygen. The resulting products may be strong enough for some structural applications, such as radiation shielding, …

On Feasibility Of Reducing Metal Fuel Content And Operating Temperatures In Chemical Oxygen Generators, Allen Garcia

Open Access Theses & Dissertations

Chemical oxygen generators are widely used in aircraft, submarines, spacecraft, and other applications, problems such as combustion instabilities and a risk of fire may be present. For example, due to malfunction of an oxygen generator, fire occurred onboard the Mir Space Station in 1997. It is thus important to improve the process stability and fire safety of chemical oxygen generators. Chemical compositions for oxygen generators include an oxygen source such as sodium chlorate (NaClO3), a transition metal oxide as a catalyst, and a metal fuel to provide energy for self-sustaining combustion. Eliminating or decreasing the metal fuel would decrease the …

Experimental Study Of Thermoelectric Properties For Randomly Distributed Carbon Nanotubes And Silicon Carbide Nanoparticles, Onasis Garcia

Open Access Theses & Dissertations

In this experimental study, the thermoelectric (TE) properties of carbon nanotubes (CNTs) and Silicon carbide (SiC) nanoparticles have been investigated. Nanoparticles were randomly disrtibuted on a non-conductive glass or quartz substrate. The carbon nanotubes used were single-walled and multi-walled type, consisting of approximately 60% semiconducting 40% metallic tubes. The experimental design is analogous to that of a thermocouple measurement, with the nanoparticle layers creating hot and cold joints with a dissimilar metal Alumel (Ni-Al). Voltage (mV), current (μA) and resistance (Ω) values were measured with respect to temperature (°C), and Seeback coefficient values were also calculated in parallel. Summarized results …

Study Of Probabilistic Approach For Structural Health Assessment Of Aerospace Structures, Jose Antonio Garcia

Open Access Theses & Dissertations

Current practical approaches used in structural health assessment programs of aerospace structures involve performing a fracture mechanics analysis to verify the safe life of structural components. The analysis typically makes several conservative assumptions implemented by NASA fracture control standard practices for critical structural components. This well-established paradigm for fracture control follows a deterministic approach and, in some cases, the calculations may produce overly conservative remaining life estimates.

This thesis describes the results of a study to approach the health assessment challenge of several critical components using probabilistic methods. The probabilistic analysis takes the current deterministic model and identifies variables that …

A Combined X-Fem And Level Set Approach For Modeling Composite Material's Micro Structure, Himanshu Kumar

Open Access Theses & Dissertations

Composite materials are usually made of fibers and binding matrix. It's always a challenge to model composite materials' microstructure through the traditional finite element method because construction of an approximation space which is discontinuous across a given line or surface will place strict restrictions on the FE mesh. The interfacing of fibers in composites' microstructure through the standard finite element method is irksome and tedious because the presence of fiber presents a discontinuity in the binding material. In this present work, the composite's microstructure is modeled through the combined approach of Level Set and Extended Finite Element Method. The fiber …

Combustion Of Lunar Regolith Mixed With Energetic Additives: Thermodynamic Calculations And Experimental Studies, Francisco Alvarez

Open Access Theses & Dissertations

The future of space exploration will require longer missions in order to better understand the conditions of near-Earth celestial objects, like the Moon or Mars. Future space missions will require the development of goods, such as propulsion fuel and structural materials, produced using the extraterrestrial resources available. The area that develops these technologies is called In-Situ Resource Utilization (ISRU). ISRU allows reducing the payload, and as a consequence reduces the energy consumption and cost of space travel. The production of structural materials on the Moon can be accomplished using Self-Propagating High-Temperature Synthesis (SHS). This work describes the combination of ISRU …

Design And Cfd Optimization Of Methane Regenerative Cooled Rocket Nozzles, Christopher Linn Bradford

Open Access Theses & Dissertations

Liquid rocket engines benefit in life cycle from the active regenerative cooling method which passes the fuel as the coolant through channels surrounding the combustion chamber. These channels are designed and optimized using structural considerations as well as heat transfer theory, then CFD simulations with the software FLUENT are performed for the final analysis. The difficulty in using methane as the fuel/coolant is addressed, and requires the use of the ideal gas numerical model in preliminary CFD simulations. Comparison to real gas numerical models is made, and results also given for one channel design. The techniques utilized herein allow the …

Experimental And Numerical Investigation Of The Effect Of Fuel Composition On Flame Stability On A Gas Turbine Combustor, Gilberto Corona

Open Access Theses & Dissertations

Gas turbines are used for power generation and aviation all over the world. Fossil fuels remain the main source of energy for the operation of gas turbines but the recent increase in environmental awareness has influenced government agencies to impose stringent limits on pollutant emissions from power generation plants. Pollutant emissions control is one of the major challenges for gas turbine designers. In this study, experimental methods and computational fluid dynamics (CFD) technologies are used to study the problems that arise when coal derived fuels are used in Gas Turbine Combustors.

Gas turbine designers need both experimental data and combustion …

Evaluation Methods For Health Monitoring Of Aerospace Structure Rotary Joints, Sergio Armando Navarro

Open Access Theses & Dissertations

In September 2007, the excessive vibrations played a significant role in the station operation since one of the rotary joints, which provides the station electrical energy, presented an anomaly. The replacement of its bearing components and re-lubrication were necessary to reduce the problem. To avoid a new anomaly, the inspection of the rotary joints performance continues by using the accelerometers data. This thesis presents three new approaches to monitor the vibrations at the International Space Station based on Root-Mean-Square, kurtosis, and Approximate Entropy (ApEn). MATLAB functions and codes were necessary to implement the three monitoring techniques results from the provided …

Synthesis, Microstructure And Thermal Analysis Of Gd2o3 - Hfo2 Coatings, Chandan Kumar Roy

Open Access Theses & Dissertations

Thermal barrier coatings (TBCs) are critical for future gas turbines of advanced coal based power generation systems. The TBCs are protective layers of low thermal conductivity ceramic materials, which prevent the damage of components that are exposed to very high temperature of the hot gases. Due to increasing demand to improve the efficiency, it is necessary to find alternate TBC materials which can withstand higher temperature for longer period than state-of-art TBCs. The present study focuses on the Gd2O3 stabilized HfO2 (GSH) as a potential candidate for TBC. GSH materials were synthesized in bulk and coatings form. The Gd2O3 content …

Combustion Characteristics Of Alh3 Flame, Sudipa Sarker

Open Access Theses & Dissertations

The combustion characteristics of Al hydride and Al were compared using a combustion chamber. Burning rate, ignition energy and temperature at atmospheric temperature and pressure in carbon dioxide and O2 were tested with a volumetric flow rate that ranged from 10 to 50% in Ar. A spark ignition system was used to ignite the Alane and Aluminum. The combustion rate was measured using a high speed camera. Results showed the combustion rate of Alane and Aluminum decreases with increasing volumetric flow rate of oxidizer. And the combustion rate of Alane is higher than that of Aluminum. Alane needs more ignition …

Multidisciplinary Collaborative Model For Complex, Angel Ernesto Delgado

Open Access Theses & Dissertations

Nowadays, most devices with advanced technology require the development of embedded systems with mechanical and electrical components as well as software including more than one discipline. These are devices that are usually complex in terms of composition and functionality and that design must follow a methodology in order to successfully design and launch a device of this nature. Hence, the assembly of a multidisciplinary engineering group is required to carry out such complex devices and develop a fully functional product. The group may also need an expert on the field that can provide guidance and knowledge where needed. This is …

Development Of A Micro-Catbed For Miniature Thrusters, Chance Paul Garcia

Open Access Theses & Dissertations

The goal of this work is to develop a micro catalytic bed for miniature thrusters. A test bed was constructed for experimental testing to characterize several parts of the micro catalytic bed. The reactant fluid studied is 90% Hydrogen Peroxide (H2O2) by weight. Three different cross sectional area designs were tested to determine decomposition efficiency, temperature reaction propensity, optimum flow rate, and temperature distribution across each bed. The products of decomposition were condensed to measure the oxygen released from decomposition. The results will be used to develop the basis for a micro catalytic bed design to implement into future miniature …

Computational Study Of Fluid-Valve Interaction Involving Deep Vein Thrombosis, Upendra Parimi

Open Access Theses & Dissertations

The venous valves in veins carry on the important function of eliminating the retrograde (re-verse) flow of blood in veins and help the veins to carry on their work effectively. The abnormal functioning of venous valves can cause deep vein thrombosis (DVT) which is a phenomena caused by clotting in deep veins. The importance of the thesis work lies in understanding the role of blood flow dynamics in Deep Vein Thrombosis (DVT). Elderly People and pregnant women are the ones who are most likely to develop DVT. It was determined from previous studies that women in their postpartum period are …

Sensitivity Analysis Of The Johnson-Cook Plasticity Model For Hypervelocity Impacts: A Hydro-Code Study, Carlos David Castellanos

Open Access Theses & Dissertations

Computer simulations have been in use for decades in the modeling of hypervelocity impacts and general large deformation problems. Several computer codes have been developed to simulate this type of problems under a variety of geometric configurations and for any number of materials. These codes make use of several constitutive material models to simulate the response of the material under a variety of thermo-mechanical conditions. The Johnson-Cook constitutive model is widely used in the simulation hypervelocity impacts for the simulation of crater formation and even perforation of target structures. This thesis presents the results of a sensitivity study of this …

Automated Fluid Handling And Leveling System For Multiple Material Stereolithography, Yinko I. Grajeda

Open Access Theses & Dissertations

This work addresses the development of an automated multiple material fluid handling and leveling system for its implementation into a Multiple-Material Stereolithography (MMSL) apparatus. A patent filed by Wicker et al. (US Patent 7,556,490) disclosing a MMSL apparatus served as the basis for the development of this work. The system is designed to operate in a variety of MMSL apparatus configurations. Fluid vats are designed to meet the enclosure constraints, facilitate the interface to the pump and sensor, and support the handling of the fluids. Due to its fluid isolation and bi-directional flow capabilities, a digital drive peristaltic pump is …

Processing Of Zrb2-Zrc-Zrxsiy Ceramic By Reactive Metal Penetration, Nischel B. Maheswaraiah

Open Access Theses & Dissertations

The processing of ZrB2-ZrC-ZrxSiy composite by reactive metal penetration was investigated as a successor to the ZrB2-SiC composites for hypersonic vehicles application, which cannot be used for extended time at temperatures greater than 1600C due to formation of SiO and CO gases. Zirconium (Zr), zirconium disilicide (ZrSi2), and boron carbide (B4C) were reacted in graphite crucibles for 60, 120, 180, and 240 minutes. Microscopy and x-ray diffraction (XRD) deduced the formation of a heterogeneous microstructure of ZrB2-ZrC-ZrxSiy precipitates surrounded by a solidified Zr-Si melt. Unreacted boron carbide was observed in samples held at 1860C for 60 minutes and 120 minutes, …

Scaffold Based In-Vitro Osteodistraction For Bone Tissue Engineering, Cesar Adrian Terrazas

Open Access Theses & Dissertations

Engineering of hard tissues such as bone is a challenge because of the limited ability of the body to heal large defects. Current treatment options, such as employing bone sections from the patient or a deceased donor have been utilized for some time now with various degrees of success. However, these methods still exhibit many limitations such as limited supply and the possibility of transmission of disease.

To address the many limitations of bone grafts, synthetic engineered substitutes have been developed and widely researched for nearly three decades. Generally termed scaffolds, these are matrices that serve the purpose of temporary …

An Investigation On Pulsing Performance Of Mn Class Bi-Propellant Thrusters, Carlos Francisco Gomez

Open Access Theses & Dissertations

With the advancement of technology and machining methods, considerable attention has been focused in manufacturing micro thrusters for micro spacecraft applications (Yetter et al, 2003). Micro propulsion systems are currently being investigated for Miniature Kill Vehicles (MKV) and Micro Satellite Systems (MSS) with an emphasis in reducing weight and cost but without affecting performance. Reducing the weight seems practical when reducing the size of the propulsion system, but problems are encountered with system design.

In addition, propulsion requirements strongly influence choice in propellant and complexity. A thorough understanding of stabilizing thrust levels and the ability to control the propulsion system …

A Variational Approach To Non-Newtonian Flow In Angular Pores: An Application To Enchanced Oil Recovery, Nithin Kavoori

Open Access Theses & Dissertations

With an alarming rise in carbon dioxide (CO2) emission from anthropogenic sources, CO2 sequestration has become an attractive choice to mitigate the emission. Some popular storage media for CO2 are oil reservoirs, deep coal-bed, deep oceanic-beds. These have been used for the long term CO2 storage. Due to special lowering viscosity and surface tension property of CO2, it has been widely used for enhanced oil recovery. The sites for CO2 sequestration or enhanced oil recovery mostly consist of porous rocks. In this thesis work, I focus on understanding the flow through porous at pore-level using variational approach.

Variational approach is …

Impacting Testing Of High Temperature Ceramics Through The Use Of A Vitiated Heater For Hot And Cold Fire Collisions, Adrian Trejo

Open Access Theses & Dissertations

Material testing is a crucial step during the design process as particular materials serve as safety and life saving conditions. In this study, a MoSi2 is chosen as the target specimen to undergo impact under high temperatures. An impact apparatus is designed and constructed for the purpose of propelling alumina particles at high velocities. A nozzle using compressed nitrogen gas is used to fire the particle at the desired velocities. Due to the possibility of thermal shock occurring at higher temperatures, a separate nozzle utilizing vitiation heating is designed to fire the particle at equally higher temperatures to prove the …

An Experimental Study Of The Hydrodynamics Of Multiphase Flow In Fluidized Beds, Gerardo Vargas

Open Access Theses & Dissertations

Fluidized bed reactors have been widely used as a gasifier in coal gasification processes to convert coal into other forms of energy. At this stage, full fluidization is required to attain the best thermochemical reaction within the fluid-solid mixture. This can only be achieved if the fluid is maintained between minimum fluidization and terminal velocities. To better understand the hydrodynamics of multiphase flow, a fluidized bed was designed and constructed to carry out the investigation. Compressed air and 1-mm glass beads were used to determine gas minimum fluidization and terminal velocities at three different particle concentrations. The solids were enclosed …

An Impedance Model Approach For Adaptive Cruise Control, Xi Sun

Open Access Theses & Dissertations

The objective of this Thesis is to design an intelligent cruise controller for the motion control of a vehicle platoon and discuss the relationship between following distance and signal sampling frequency. For safe vehicle following, an Adaptive cruise control (ACC) law is considered in an impedance model based approach. The impedance model is developed to guide the dynamic behavior of the following vehicles. In order to assure the safety of the vehicle platoon, it is necessary to regulate the distance between vehicles at an appropriate value. The proposed control law uses relative speed and spacing as well as preceding acceleration …

An Investigation On The Mixing Hydrodynamics Of A Gas-Solid Fluidized Bed, Mario Alberto Ruvalcaba

Open Access Theses & Dissertations

In previous decades, the experimental and numerical studies of multiphase flows have remarkably increased especially gas-solid flows. Research of this type has abundant applications in energy, chemical processes, among others. Moreover, common applications include fluid catalytic cracking for petroleum refineries, fluidized bed reactors (type of chemical reactors), interface modification, such as applying a coating onto solid items, and an important technology breakthrough in coal gasification. The work presented on this thesis concentrates on the investigation of gas-solid flows utilizing Computational Fluid Dynamics (CFD) methods. The gas-solid flows studies performed on this investigation assumed the solid phase as a continuum with …

Flashback Propensity Of Gas Mixtures, Bidhan Kumar Dam

Open Access Theses & Dissertations

In this study, experimental measurements of flashback propensity of hydrogen (H2)-carbon monoxide (CO) mixtures, which are the primary constituents of syngas fuels, are described. The effects of H2 concentration, diluents and swirl on the flashback propensity of H2 CO flames are discussed. For boundary layer type flashback, the critical velocity gradient (gF) values of 5 to 95%, 15 to 85%, and 25 to 75% H2-CO mixtures somewhat agree with the scaling relation (g_F=c (S_L^2)/α) and yield an average c value of 0.038. At a lower SL2/α ratio, burner diameters have small effects on critical velocity gradient measurements; however, the effect …

Retrofitting A Stereolithography System Within A Laminar Flow Hood, Mahesh Pandurang Tonde

Open Access Theses & Dissertations

This research focused on retrofitting the stereolithography (SL), a rapid prototyping technology, inside a laminar flow hood to provide an aseptic, particulate-free environment for scaffold fabrication. Two of the important objectives of this project were to retrofit the commercial SLA 250/30 inside a laminar flow hood to demonstrate that the manufacturability of the Bio-SL system was comparable to original SLA 250 system and to conduct the sterility test on fabricated scaffolds to show that the laminar flow hood was able to provide an aseptic, particulate-free environment for the fabrication.

Aluminum Hydride Compunds: A Theoretical And Experimental Spectroscopic Study, Layra E. Reza

Open Access Theses & Dissertations

None

Experimental Investigation Of A Meso-Scale Axial Flow Pump, Jonathon Ray Bice

Open Access Theses & Dissertations

The scope of this work involves the testing of an experimental meso-scale axial flow pump intended for use in micro-spacecraft and micro-satellites. A setup was implemented to test pressure and flow characteristics at different velocities for three configurations of the pump. In addition, an alternate setup was used to test torque and efficiency. Computational fluid dynamics simulations were also conducted. The results are presented and analyzed to determine whether the pump is a viable alternative for the space industry.

Insight Into The Physics Of Rupture: Dynamic Triggering Seismicity, Hector Gonzalez-Huizar

Open Access Theses & Dissertations

Seismic waves can trigger earthquakes and tremor at large distances from the causable event. Dynamic triggering occurs when the surface waves from large earthquakes change the stresses conditions on previously overstressed faults, promoting failure. To understand the causative stresses and environments behind dynamic triggering, we model the change in the stress field that the passing of Rayleigh and Love waves cause on a fault plane of arbitrary orientation relative to the direction of propagation of the waves, and apply a Coulomb failure criterion to calculate the potential of these stress changes to trigger seismicity. We apply our model to three …