Open Access. Powered by Scholars. Published by Universities.®

Mechanical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Discipline
Keyword
Publication Year

Articles 901 - 930 of 1141

Full-Text Articles in Mechanical Engineering

Multidimensional, Time-Accurate Cfd Simulation Of Adsorption/Desorption In A Carbon Canister, Xingyan Bai, Kakkattukuzhy M. Isaac, D. Klein, R. Banerjee, J. Edson, W. Breig, L. Oliver Jan 2003

Multidimensional, Time-Accurate Cfd Simulation Of Adsorption/Desorption In A Carbon Canister, Xingyan Bai, Kakkattukuzhy M. Isaac, D. Klein, R. Banerjee, J. Edson, W. Breig, L. Oliver

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Computational fluid dynamics simulations of fixed-bed adiabatic adsorption/desorption processes are presented in this paper. Linear driving force model is used for heat and mass transfer rates. a two-dimensional cylindrical canister and three-dimensional automotive production canister geometry are used to study the adsorption/desorption processes of carbon dioxide in helium carrier gas on Norit B4 activated carbon. the two-dimensional results compare well with the results of Hwang et al. [1]. Computational results as breakthrough curve, adsorption amount and temperature profiles are provided. Results show that non-adiabatic model should be used to fully utilize the activated carbon bed capacity prior to breakthrough. Copyright …

Go to article

Photoreflectance Spectroscopy Of Strained (In)Gaasn/Gaas Multiple Quantum Wells, J. B. Heroux, Xiaodong Yang, W. I. Wang Oct 2002

Photoreflectance Spectroscopy Of Strained (In)Gaasn/Gaas Multiple Quantum Wells, J. B. Heroux, Xiaodong Yang, W. I. Wang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The effect of a variation of the indium and nitrogen concentrations in Inᵪ Ga1-x As1-y Ny /GaAs multiquantum wells grown by molecular beam epitaxy is studied systematically by room temperature photoreflectance spectroscopy. The band gap redshift caused by a nitrogen fraction of 1.5% decreases by as much as 30% as the indium fraction increases from 0% to 20%. A moderate increase of electron effective mass (Δmₑ ~ 0.03m₀) is found in all samples containing nitrogen (y ≳ 1%). In compressively strained quantum wells, the energy separation between the first confined heavy and light hole energy levels decreases …

Go to article

Composite Structures Using Asphalt Based Roofing Scrap Materials: Eiera -- Final Report, V. J. Flanigan, K. Chandrashekhara, Susan L. Murray Sep 2002

Composite Structures Using Asphalt Based Roofing Scrap Materials: Eiera -- Final Report, V. J. Flanigan, K. Chandrashekhara, Susan L. Murray

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The uses of recycled materials in composites provide the potential for large cost savings and a solution to the ever-growing disposal problem. Shingles contain petroleum based binders and fillers, which used as a valuable resource in composite production. Composites offer inherent advantages over traditional materials in regard to corrosion resistance, design flexibility and extended service life. Use of scrap-roofing shingles as a core material in glass fiber reinforced composite materials offer potential low cost composite products such as sound barrier system, railroad ties and other building materials including blocks. In the present work, processes have been developed for shredding scrap …

Go to article

Laser Aided Part Repair -- A Review, Jinglei Wang, Sashikanth Prakash, Yashodhan Joshi, Frank W. Liou Aug 2002

Laser Aided Part Repair -- A Review, Jinglei Wang, Sashikanth Prakash, Yashodhan Joshi, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Laser aided part-repair is an emerging trend that has great potential for future industrial applications. Part-repair technologies are currently used in repairing military and civilian equipment. The focus of this paper is to review the current repair processes, which use the laser-aided metal deposition technology. Many metal parts, which are worn by continual use, can be restored to working condition by the deposition of metal with a laser and machining. This not only extends the life of the part, but also, saves on cost. A comparison between various processes, their parameters, efficiency, cost, and etc. are also presented. The process …

Go to article

Object-Oriented Modeling And Fauly Detection Of A Powder Feeder For A Laser Metal Deposition System, Robert G. Landers, Michael Gene Hilgers, Frank W. Liou, Bruce M. Mcmillin Aug 2002

Object-Oriented Modeling And Fauly Detection Of A Powder Feeder For A Laser Metal Deposition System, Robert G. Landers, Michael Gene Hilgers, Frank W. Liou, Bruce M. Mcmillin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

One of the most critical components of a laser metal deposition system is the powder feeder unit. Techniques are required to efficiently design and analyze these systems and to ensure fault tolerance during the operation. In this paper, a model of the powder feeder unit, based on object- oriented abstractions of it components, is developed. This model is modular in that specific components can be efficiently updated or replaced with components that perform a similar function. In addition, the model can be used for simulation allowing for efficient design and analysis. Assurance of the correctness of the powder feeder system …

Go to article

Investigation Of Part Accuracy And Surface Roughness In Rapid Freeze Prototyping Based Investment Casting, Qingbin Liu, Ming-Chuan Leu, Stephen M. Schmitt Aug 2002

Investigation Of Part Accuracy And Surface Roughness In Rapid Freeze Prototyping Based Investment Casting, Qingbin Liu, Ming-Chuan Leu, Stephen M. Schmitt

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The study as described in this paper is aimed at investigating the dimensional accuracy and surface finish of metal parts made by investment casting with ice patterns generated by rapid freeze prototyping. The process of investment casting with ice patterns is described and contrast with conventional investment casting with wax patterns is made. The selection of binder material for ceramic slurries and the need for an interface agent to separate the ice pattern from the ceramic slurry in the mold making process are discussed. The accuracy and surface finish of ice patterns and of the metal castings are presented and …

Go to article

System Integration And Real-Time Control Architecture Of A Laser Aided Manufacturing Process, Mallikharjuna R. Boddu, Robert G. Landers, Srinivas Musti, Sanjeev Agarwal, Jianzhong Ruan, Frank W. Liou Aug 2002

System Integration And Real-Time Control Architecture Of A Laser Aided Manufacturing Process, Mallikharjuna R. Boddu, Robert G. Landers, Srinivas Musti, Sanjeev Agarwal, Jianzhong Ruan, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper discusses a hybrid deposition–removal manufacturing system being developed at the University of Missouri--Rolla. The system consists of a laser system, five-axis CNC machining center, and powder feeder system. A description of the control software, real-time control architecture, and integration of various subsystems to build the hybrid system is given. The interaction of the real-time controller with various sensors and subsystems to monitor and regulate the process is presented. The communication between integrated process planning for the system and real–time control is also discussed in this paper.

Go to article

A Study On Effects Of Process Parameters In Rapid Freeze Prototyping, Frances D. Bryant, Guanghua Sui, Ming-Chuan Leu Aug 2002

A Study On Effects Of Process Parameters In Rapid Freeze Prototyping, Frances D. Bryant, Guanghua Sui, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Rapid Freeze Prototyping (RFP) is a relatively new solid freeform fabrication process, which builds a three-dimensional part according to a CAD model by depositing and freezing water droplets layer by layer. A study on the effects of RFP process parameters including the nozzle scanning speed, droplet size, and droplet frequency in building ice parts with a single-nozzle work head is made. Presented in this paper are the results of this study which indicate that these process parameters determine the ice layer thickness and ice line width, which in turn determine the surface roughness and the waiting time required after depositing …

Go to article

Object-Oriented Modeling And Fault Detection Of A Powder Feeder For A Laser Metal Deposition System, Robert G. Landers, Michael Gene Hilgers, Frank W. Liou, Bruce M. Mcmillin Aug 2002

Object-Oriented Modeling And Fault Detection Of A Powder Feeder For A Laser Metal Deposition System, Robert G. Landers, Michael Gene Hilgers, Frank W. Liou, Bruce M. Mcmillin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

One of the most critical components of a laser metal deposition system is the powder feeder unit. Techniques are required to efficiently design and analyze these systems and to ensure fault tolerance during the operation. In this paper, a model of the powder feeder unit, based on object-oriented abstractions of it components, is developed. This model is modular in that specific components can be efficiently updated or replaced with components that perform a similar function. In addition, the model can be used for simulation allowing for efficient design and analysis. Assurance of the correctness of the powder feeder system is …

Go to article

Energy Conservation Using The Closed Water Loop Heat Pump, Harry J. Sauer, Guruprasad Rao Apr 2002

Energy Conservation Using The Closed Water Loop Heat Pump, Harry J. Sauer, Guruprasad Rao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The closed water loop heat pump (CWLHP) system has been shown to be an energy conserving building heating and cooling system. Such systems are most applicable where simultaneous heating and cooling needs occur. In these systems, internally generated space heat is used to meet heating needs before external heat is provided from a heating plant. The water loop is the transport system moving heat from where it is not wanted to where it is required. Addition of water storage gives an option to store thermal energy for later use. In the common arrangement for the closed water loop heat pump …

Go to article

Analytical Derivation Of A Coupled-Circuit Model Of A Claw-Pole Alternator With Concentrated Stator Windings, Hua Bai, Steven Pekarek, Jerry L. Tichenor, Walter Eversman, Duane J. Buening, Gregory R. Holbrook, Michael L. Hull, Ronald J. Krefta, Steven J. Shields Mar 2002

Analytical Derivation Of A Coupled-Circuit Model Of A Claw-Pole Alternator With Concentrated Stator Windings, Hua Bai, Steven Pekarek, Jerry L. Tichenor, Walter Eversman, Duane J. Buening, Gregory R. Holbrook, Michael L. Hull, Ronald J. Krefta, Steven J. Shields

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A lumped-parameter coupled-circuit model of a claw-pole alternator is derived. To derive the model, analytical techniques are used to define a three-dimensional (3-D) Fourier-series representation of the airgap flux density. Included in the series expansion are the harmonics introduced by rotor saliency, concentrated stator windings, and stator slots. From the airgap flux density waveform, relatively simple closed-form expressions for the stator and rotor self- and mutual-inductances are obtained. The coupled-circuit model is implemented in the simulation of an alternator/rectifier system using a commercial state-model-based circuit analysis program. Comparisons with experimental results demonstrate the accuracy of the model in predicting both …

Go to article

State Dependent Riccati Equation Based Spacecraft Attitude Control, Ming Xin, S. N. Balakrishnan Jan 2002

State Dependent Riccati Equation Based Spacecraft Attitude Control, Ming Xin, S. N. Balakrishnan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We present a new optimal control approach to the robust spacecraft attitude control in the framework of State Dependent Riccati Equation (SDRE) technique. To treat this highly nonlinear control system, we formulate it as a nonlinear optimal regulator problem. SDRE technique was well applied to this class of attitude control problem. We also synthesize a neural network based extra controller to achieve the robustness in the presence of the parameter uncertainties. A general spacecraft attitude regulation problem was studied to show the effectiveness of SDRE approach and robust extra control design. © 2002. Published by the American Institute of Aeronautics …

Go to article

Accuracy And Efficiency In Fem Modeling Of Turbofan Acoustic Radiation, Eivind Listerud, Walter Eversman Jan 2002

Accuracy And Efficiency In Fem Modeling Of Turbofan Acoustic Radiation, Eivind Listerud, Walter Eversman

Mechanical and Aerospace Engineering Faculty Research & Creative Works

It is shown that there is an increase in efficiency of acoustic radiation finite element modeling with the incorporation of cubic rather than quadratic serendipity elements. Cubic serendipity elements produce a given level of accuracy for acoustic pressure using a coarser mesh than required using quadratic elements, thus decreasing the CPU time needed for accurate modeling. These elements have been applied to the near field inlet and aft acoustic radiation models for a turbofan engine with the result of considerable reduction in the dimensionality of the problem without sacrificing accuracy. Visual observations of the gain in computational efficiency is supported …

Go to article

A New Optimal Nonlinear Control Method And Its Application To Missile Guidance Law Design, Ming Xin, S. N. Balakrishnan Jan 2002

A New Optimal Nonlinear Control Method And Its Application To Missile Guidance Law Design, Ming Xin, S. N. Balakrishnan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this paper, a new nonlinear control synthesis technique (q-D approximation) is discussed. By adding perturbations to the cost function this approach achieves a suboptimal solution to the Hamilton-Jacobi- Bellman (HJB) equation. By manipulating the perturbation terms both asymptotic stability and optimality properties are obtained. An application to the design of missile guidance law is presented and is compared with a similar technique (State Dependent Riccati Equation technique) used in problems of this class. © 2002 by the author(s).

Go to article

Proper Orthogonal Decomposition Based Optimal Control Design Of Heat Equation With Discrete Actuators Using Neural Networks, Radhakant Padhi, S. N. Balakrishnan Jan 2002

Proper Orthogonal Decomposition Based Optimal Control Design Of Heat Equation With Discrete Actuators Using Neural Networks, Radhakant Padhi, S. N. Balakrishnan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A new method is presented for the optimal control design of one-dimensional heat equation with the actuators being concentrated at discrete points in the spatial domain. This systematic methodology incorporates the advanced concept of proper orthogonal decomposition for the model reduction of distributed parameter systems. After deigning a set of problem-oriented basis functions an analogous optimal control problem in the lumped domain is formulated. The optimal control problem is then solved in the time domain, in a state feedback sense, following the philosophy of adaptive critic neural networks. The control solution is then mapped back to the spatial domain using …

Go to article

A Quantitative Similarity Metric For Design-By-Analogy, Daniel A. Mcadams, Kristin L. Wood Jan 2002

A Quantitative Similarity Metric For Design-By-Analogy, Daniel A. Mcadams, Kristin L. Wood

Mechanical and Aerospace Engineering Faculty Research & Creative Works

During the design and development of new products, design engineers use many techniques to generate and define new and "good" concepts. Inherent in this search for solutions is the conscious and unconscious reliance on prior experience and knowledge, or design-by-analogy. In this paper, a quantitative metric for design-by-analogy is developed. This metric is based on the functional similarity of products. By using this product-similarity metric, designers are able to formalize and quantify design-by-analogy techniques during concept and layout design. The methods, as developed in this paper, allow a designer with limited experience to develop sophisticated solutions that enhance the overall …

Go to article

Cfd Simulations Of Critical Components In Fuel Filling Systems, R. Banerjee, X. Bai, D. Pugh, Kakkattukuzhy M. Isaac, D. Klein, J. Edson, W. Breig, L. Oliver Jan 2002

Cfd Simulations Of Critical Components In Fuel Filling Systems, R. Banerjee, X. Bai, D. Pugh, Kakkattukuzhy M. Isaac, D. Klein, J. Edson, W. Breig, L. Oliver

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A comprehensive study is reported on the dynamics of critical components in the refueling process for passenger cars and light trucks. Nozzle, filler pipe, recirculation tube, tank, and canister are investigated. CFD simulations are conducted for flow rates of 4 liters/min (lpm) to 80 lpm for gasoline and up to 120 lpm for diesel fuel. Tank pressure, identified as a critical parameter controlling flow performance, is measured and utilized as a boundary condition. Flow simulation in a carbon canister, accomplished by treating the adsorbing carbon as a porous medium, indicates pressure drops which are in good agreement with published experimental …

Go to article

State-Constrained Agile Missile Control With Adaptive-Critic-Based Neural Networks, Dongchen Han, S. N. Balakrishnan Jan 2002

State-Constrained Agile Missile Control With Adaptive-Critic-Based Neural Networks, Dongchen Han, S. N. Balakrishnan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this study, we develop an adaptive-critic-based controller to steer an agile missile that has a constraint on the minimum flight Mach number from various initial Mach numbers to a given final Mach number in minimum time while completely reversing its flightpath angle. This class of bounded state space, free final time problems is very difficult to solve due to discontinuities in costates at the constraint boundaries. We use a two-neural-network structure called "adaptive critic" in this study to carry out the optimization process. This structure obtains an optimal controller through solving optimal control-related equations resulting from a Hamiltonian formulation. …

Go to article

Experimental Implementation Of Adaptive-Critic Based Infinite Time Optimal Neurocontrol For A Heat Diffusion System, Prashant Prabhat, S. N. Balakrishnan, Dwight C. Look Jan 2002

Experimental Implementation Of Adaptive-Critic Based Infinite Time Optimal Neurocontrol For A Heat Diffusion System, Prashant Prabhat, S. N. Balakrishnan, Dwight C. Look

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Recently the synthesis methodology for the infinite time optimal neuro-controllers for PDE systems in the framework of adaptive-critic design has been developed. In this paper, first we model an experimental setup representing one dimensional heat diffusion problems. Then we synthesize and implement an adaptive-critic based neuro-controller for online temperature profile control of the experimental setup.

Go to article

Proper Orthogonal Decomposition Based Feedback Optimal Control Synthesis Of Distributed Parameter Systems Using Neural Networks, Radhakant Padhi, S. N. Balakrishnan Jan 2002

Proper Orthogonal Decomposition Based Feedback Optimal Control Synthesis Of Distributed Parameter Systems Using Neural Networks, Radhakant Padhi, S. N. Balakrishnan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A new method for optimal control design of distributed parameter systems is presented in this paper. The concept of proper orthogonal decomposition is used for the model reduction of distributed parameter systems to form a reduced order lumped parameter problem. The optimal control problem is then solved in the time domain, in a state feedback sense, following the philosophy of ''adaptive critic'' neural networks. The control solution is then mapped back to the spatial domain using the same basis functions. Numerical simulation results are presented for a linear and nonlinear one-dimensional heat equation problem in an infinite time regulator framework.

Go to article

A New Method For Suboptimal Control Of A Class Of Nonlinear Systems, Ming Xin, S. N. Balakrishnan Jan 2002

A New Method For Suboptimal Control Of A Class Of Nonlinear Systems, Ming Xin, S. N. Balakrishnan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this paper, a new nonlinear control synthesis technique (θ - D approximation) is presented. This approach achieves suboptimal solutions to nonlinear optimal control problems in the sense that it solves the Hamilton-Jacobi-Bellman (HJB) equation approximately by adding perturbations to the cost function. By manipulating the perturbation terms both semi-globally asymptotic stability and suboptimality properties can be obtained. The convergence and stability proofs are given. This method overcomes the large control for large initial states problem that occurs in some other Taylor expansion based methods. It does not need time-consuming online computations like the state dependent Riccati equation (SDRE) technique. …

Go to article

A Functional Basis For Engineering Design: Reconciling And Evolving Previous Efforts, Julie Hirtz, Robert B. Stone, Daniel A. Mcadams, Simon Szykman, Kristin L. Wood Jan 2002

A Functional Basis For Engineering Design: Reconciling And Evolving Previous Efforts, Julie Hirtz, Robert B. Stone, Daniel A. Mcadams, Simon Szykman, Kristin L. Wood

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In engineering design, all products and artifacts have some intended reason behind their existence: the product or artifact function. Functional modeling provides an abstract, yet direct, method for understanding and representing an overall product or artifact function. Functional modeling also strategically guides design activities such as problem decomposition, physical modeling, product architecting, concept generation, and team organization. A formal function representation is needed to support functional modeling, and a standardized set of function-related terminology leads to repeatable and meaningful results from such a representation. We refer to this representation as a functional basis; in this paper, we seek to reconcile …

Go to article

A New Filtering Technique For A Class Of Nonlinear Systems, Ming Xin, S. N. Balakrishnan Jan 2002

A New Filtering Technique For A Class Of Nonlinear Systems, Ming Xin, S. N. Balakrishnan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this paper, a new nonlinear filtering technique (θ-D filter) is presented. This filter is derived by constructing the dual of a new nonlinear regulator control technique, θ-D approximation which involves approximate solution to the Hamilton-Jacobi-Bellman equation. The structure of this filter is similar to the state dependent riccati equation filter (SDREF). However, this method does not need time-consuming online computation of the algebraic Riccati equation at each sample time compared with the SDREF. By manipulating the perturbation terms both the asymptotic stability and optimality properties can be obtained. A simple pendulum problem is investigated to demonstrate the effectiveness of …

Go to article

World Wide Web Resources For Materials Science, Serge Abrate Dec 2001

World Wide Web Resources For Materials Science, Serge Abrate

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The internet makes technical information readily available in ways that were unthinkable a few years ago. This article shows how the World Wide Web (the web) can be used in a Materials Science class to enrich the educational process. Strategies for finding and evaluating information and are discussed. © 2002 Wiley Periodicals, Inc.

Go to article

Research And Development Of A Hybrid Rapid Manufacturing Process, Frank W. Liou, J. Choi, Robert G. Landers, Vijayakumar Janardhan, S. N. Balakrishnan, Sanjeev Agarwal Aug 2001

Research And Development Of A Hybrid Rapid Manufacturing Process, Frank W. Liou, J. Choi, Robert G. Landers, Vijayakumar Janardhan, S. N. Balakrishnan, Sanjeev Agarwal

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper presents the research and development of a hybrid rapid manufacturing process being developed at the University of Missouri--Rolla. This process includes a laser deposition and a 5- axis CNC milling system. By combining laser deposition and machining processes, the resulting hybrid process can provide greater build capability and better accuracy and surface finish. The hybrid process can build some features that are difficult to build in using a purely deposition processes. The issues and related approaches in the research and development of the hybrid deposition-machining process, including laser deposition process, system design and integration, process planning, and sensor …

Go to article

Empirical Modeling And Vision Based Control For Laser Aided Metal Deposition Process, Mallikharjuna R. Boddu, Srinivas Musti, Robert G. Landers, Sanjeev Agarwal, Frank W. Liou Aug 2001

Empirical Modeling And Vision Based Control For Laser Aided Metal Deposition Process, Mallikharjuna R. Boddu, Srinivas Musti, Robert G. Landers, Sanjeev Agarwal, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper gives a brief description of the laser aided manufacturing process. Empirical models describing the process dynamics of the laser aided metal deposition process is developed based on some of the models found in the literature. These models provide the basis for process planning and real time control. An embedded vision system, a two color temperature sensor, and a laser displacement sensor are incorporated for real time monitoring and control of the deposition process. The temperature profile of the surface and geometric characteristics of the melt pool are studied to ensure consistent operation of the process.

Go to article

Skeleton-Based Geometric Reasoning For Adaptive Slicing In A Five-Axis Laser Aided Manufacturing Process System, Kunnayut Eiamsa-Ard, Jun Zhang, Frank W. Liou Aug 2001

Skeleton-Based Geometric Reasoning For Adaptive Slicing In A Five-Axis Laser Aided Manufacturing Process System, Kunnayut Eiamsa-Ard, Jun Zhang, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Multi-axis Laser Aided Manufacturing Process (LAMP) is an additive manufacturing process similar to laser cladding. This process can produce full functional parts [1]. Traditional Layered Manufacturing processes produce parts with limited surface quality; and also the build time is often long due to the deposition of sacrificial support structure. The multiple degrees of freedom endow the LAMP system a capability to build parts without support structure. An algorithm for adaptive slicing based on skeleton is presented in this paper. The skeleton is useful for many applications such as feature recognition, robot path planning, shape analysis, and etc [2]. The near …

Go to article

Control Of Laser Cladding For Rapid Prototyping -- A Review, Mallikharjuna R. Boddu, Robert G. Landers, Frank W. Liou Aug 2001

Control Of Laser Cladding For Rapid Prototyping -- A Review, Mallikharjuna R. Boddu, Robert G. Landers, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Lasers have wide-ranging applications in the manufacturing field (e.g., cladding, welding, cutting, machining, drilling). Extensive work is being conducted to apply laser cladding as a Rapid Prototyping (RP) process. In this paper the authors illustrate various principles of laser cladding in rapid prototyping. Important process parameters for the control of the laser cladding process are discussed as well as the experimental methods adopted, and results obtained by, various authors.

Go to article

Ingaasnsb/Gaas Quantum Wells For 1.55 Μm Lasers Grown By Molecular-Beam Epitaxy, Xiaodong Yang, J. B. Heroux, L. F. Mei, W. I. Wang Jun 2001

Ingaasnsb/Gaas Quantum Wells For 1.55 Μm Lasers Grown By Molecular-Beam Epitaxy, Xiaodong Yang, J. B. Heroux, L. F. Mei, W. I. Wang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

InGaAsNSb/GaAs quantum wells (QWs) were grown by solid-source molecular-beam epitaxy using a N2 radio frequency plasma source. The effect of adding Sb during growth of InGaAsN/GaAs QWs was studied. X-ray diffraction, reflection high-energy electron diffraction and transmission electron microscopy studies indicate that Sb suppresses the three-dimensional growth and improves the interface of the QWs. X-ray diffraction and secondary ion mass spectroscopy analysis show that Sb gets incorporated into the quantum well, which becomes a quinternary compound that was previously unexplored. The introduction of Sb during growth of InGaAsN/GaAs QWs significantly enhances the optical properties of the QWs. 1.53 /spl …

Go to article

Membrane Electrostatic Precipitator, Hajrudin Pasic, M. Khairul Alam, David J. Bayless May 2001

Membrane Electrostatic Precipitator, Hajrudin Pasic, M. Khairul Alam, David J. Bayless

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A membrane is used as a collection substrate in an electrostatic precipitator (ESP). Possible material choices include fibers in the form of woven mats, screens made from stainless steel wires or fiber reinforced polymer composite membranes. The membranes have a tensile bias applied during operation, and have impulse tensile force applied during a dust removal step. By combining a dry ESP membrane field with wet-film cleaning field, it may be possible to improve collection efficiencies both by reducing turbulence and eliminating re-entrainment losses due to rapping. Through implementation of new materials that resist hostile ESP environments, the invention enhances the …

Go to article

First Prev Next Last