Mechanical Engineering Commons^™

In-Bottle Wine Aerator, Kevin Kesler, Patrick Lowry, Paul Woolworth

Mechanical Engineering

The proposal for Capitol Cultivators discusses and evaluates the development of an in-bottle wine aerator. It defines the problem and need for an aerator located inside the wine bottle. Additionally, it outlines requirements essential for an effective design and describes the engineering process that will be followed.

Design Of An Automatic Wood Trimming Machine, Van Ho, Nicholas Maskal, Andrew Rutland

Mechanical Engineering

This final design report, prepared for Sunrise Arts by the Cal Poly design team Mahogany Automation, details the year-long process in which the team of three engineering students designed and built an automated wooden -plank edge trimming machine that incorporates anti-jamming and continuous loading features. The team has examined current woodworking machines and features available on the industrial and commercial market, and used these as guides along with device requirements set by the project sponsor, Bruce Palmer. The focus has been on designing the simplest and most cost effective device that allows operators to make production runs of wooden slats …

Peripheral Artery Catheter Tracking System, Chris Blecher, Michael Lashore, Nhan Le

Mechanical Engineering

No abstract provided.

Rifle And Shotgun Recoil Test System, Benjamin Canfield-Hershkowitz, Trevor Foster, William Meijer

Mechanical Engineering

No abstract provided.

Trampoline And Bungee Fatigue-Test Machine, Andy Brock, Christopher D'Elia, Ryan Murphy

Mechanical Engineering

JumpSport, a Saratoga based recreational and fitness trampoline company, sponsored this senior project team towards the development of a fatigue-testing machine. The goal of this project was to iterate the previous machine JumpSport used for bungee cord, spring, and trampoline fatigue testing. Since minimal study had been conducted on these specific bungee cords, the fixture was designed to confirm the theoretical correlations for rubber and perform the final tests according to a strict protocol. Operating with a specific test protocol in mind will allow the data from multiple tests to be combined and analyzed statistically. With a design concept in …

Sodhana Environmental - Final Design Report, Eric Taylor, Corissa Bellis, Cody Perez, Cameron Zeller

Mechanical Engineering

A fully designed cost-effective, sustainable, toilet for the developing world.

Otto - The Wall Driving Platform, Cameron Venancio, Eric Mar, Kelvin Lei

Mechanical Engineering

A robotic wall-climbing robot.

Automated Foosball Table Year 1: Final Project Report, Juan David Gutierrez-Franco, John Inlow, Jesse Graham, Larry Huang

Mechanical Engineering

This project is a first iteration of an automated foosball table designed and created using servomotors provided by Yaskawa to create an interactive tradeshow display where guests can play against the algorithms developed in the PLC (programmable logic controller) controlling the servomotors. There will be a second iteration of the project done by a different team directly following this one. The motion components were selected with the intent to be able to surpass the reaction times and speeds of expert human players. There are a total of eight servomotors, four controlling linear actuators for translation of rods, and four controlling …

Prototype Device For The Detection Of Subsurface Peach Pit Fragments, Colby Lippincott, Hamilton Little, Rick Hayes, Elliot Wenzel

Mechanical Engineering

Peach pits can break during processing into several small fragments and are difficult to see and remove from the peach. Wawona Frozen Foods is asking for a fully designed, built and tested prototype that can detect these pit fragments with ease and speed. Our design uses an array of needles that puncture into a peach half. A pressure sensor measures the force on the needles and determines whether or not each needle hit the peach flesh or a pit fragment. The array of needles consists of 313 needles each with a diameter of 0.6 mm with a total array diameter …

Heat Transfer Experiment: Energy Conservation, Ben Ward, Brett Wallace, Ryan Waltman

Mechanical Engineering

This proposal, prepared for the Mechanical Engineering Department by the HTEC design team will redesign and replace the current energy conversion lab that is inaccurate and out of date. The team will evaluate methods of energy conversion, specifically using braking systems, as well as existing labs in order to design an accurate and relatable experiment for this lab. The project team will work with Professor Kim Shollenberger in order to design an experiment that demonstrates energy conversion through the first law of thermodynamics while utilizing a common device that is practical in student’s lives. The final result of this project …

Low-Cost Scheffler Solar Concentrator For The Developing World, Darren Sholes, Jason Morgan, Nicholas Fuller

Mechanical Engineering

This report will outline an approach to design, test, and build a low-cost Scheffler solar concentrator to be used for safer, sustainable and cost effective cooking in the developing world. The function of Scheffler concentrators and a proposed method to create one in an economic, environmentally conscious manner is summarized. If successful, the design will be presented in a way that is readily and freely available to anyone in the world. The authors have examined existing technology and researched the availability and cost of different materials. Analysis was performed in order to verify the feasibility of the different design ideas …

Twelve Days Of Christmas Mechatronic Display, Michael Beltran, Christine Hagerman, Katie Ruhm

Mechanical Engineering

No abstract provided.

A Finite Element Model Based On Coupled Refined High-Order Global-Local Theory For Static Analysis Of Electromechanical Embedded Shear-Mode Piezoelectric Sandwich Composite Beams With Various Widths, S.B. Beheshti-Aval, S. Shahvaghar-Asl, M. Lezgy-Nazargah, Mohammad N. Noori

Mechanical Engineering

In this study, a new theory for the accurate simulation of the shear-mode behaviour of thin or thick piezoelectric sandwich composite beams is developed. The effects of transverse normal stress and transverse flexibility of layers are considered in the development of the proposed formulation. In order to increase the computational accuracy, all kinematic and stress continuity conditions are satisfied at layer interfaces. Moreover, for the first time, both the electrically induced strain components and the transverse flexibility are taken into account in the proposed formulation. Despite the fact that the number of unknown mechanical parameters in this theory is only …

Workshop A - Implementing The "Design Your Process Of Becoming A World Class Engineering Student" Project, Steffen Peuker, Raymond B. Landis

Mechanical Engineering

Many students come into an engineering program lacking a strong commitment to stay in an engineering program and to graduate with an engineering degree. For students to accomplish the challenging goal of graduating in engineering requires a strong commitment, and behaviors and attitudes to follow through that commitment. To strengthen the commitment of the freshman engineering students an innovative project has been developed. The project challenges students to develop their process to become a "World-Class Engineering Student". Having freshman engineering students design their individually tailored learning process as part of a semester long project in the setting of a student …

Implementing Team Based Learning In Freshmen Engineering Courses, Steffen Peuker, Jennifer Peuker

Mechanical Engineering

Team Based Learning (TBL) is a specific pedagogical tool that emphasizes collaborative learning. Oftentimes TBL is confused with group activities and other active learning strategies involving student teams. TBL is distinct because it follows a prescribed sequence of individual work and group work, and includes immediate feedback as well as peer evaluation. TBL is widely used in medical, pharmacy and nursing schools and the use of TBL in engineering education is growing. The advantages of using TBL in the class room include: (1) students are held accountable for individual (pre-class) and group (in-class) work. (2) The responsibility for learning shifts …

Incorporating Active Learning Into A Thermal System Publications Lecture, Jennifer M. Peuker, Steffen Peuker

Mechanical Engineering

Many mechanical engineering departments offer a thermal system design (or similar) course for senior students. Some courses have a laboratory component, but many are a lecture only format. This paper demonstrates how active learning—through virtual labs, a semester long project, and in-class assignments—was incorporated into the lecture portion of a thermal system design course to enhance learning and provide the students a laboratory experience without a physical laboratory. These active learning ideas can also supplement the learning during lecture for those courses which have a designated laboratory time. Anecdotal evidence of the activities indicates that students were engaged and enjoyed …

Effect Of Multiple Choice Testing On Student Performance In An Introductory Engineering Course, Jennifer M. Peuker, Jennifer Mcferran Brock, Steffen Peuker

Mechanical Engineering

This study aims to compare student performance on introductory engineering statics material by comparing the exam scores of students who are given both multiple choice (MC) questions and constructed response (CR) questions to see whether the type of exam question makes a difference in student performance and understanding. Seventy-five students in an introductory engineering course did either a MC version or a CR version of each statics problem, resulting in MC answers and a control group of CR answers to each statics problem. The students were also polled for feedback regarding their preferences of test question format at the end …

Student Industry Cooperation For The Development Of Thermal System Design Teaching Laboratory Equipment, Steffen Peuker

Mechanical Engineering

In higher education, hands-on undergraduate education using state-of-the-art laboratory equipment is important to meet the quality standards expected in the engineering profession. However, the development of modern engineering laboratories is not only time consuming, but also budget constraints can hamper the development of needed laboratories for instructional purposes as Bidana and Billo state: "Development of state-of-the-art engineering laboratories is becoming an increasing problem in the University environment. Due to the greater variety and increased complexity of much state-of-the-art hardware and software, the cost and cycle time for development and startup of a modern engineering laboratory can be excessive. This, together …

Edwards Lifesciences - Skirt To Frame Attachment Manufacturing Aid, Samuel Joda, Cesar Grimaldo, Patrick Hutchinson

Mechanical Engineering

No abstract provided.

Multilink Suspension & Steering System For Cal Poly Formula Electric, Tristan French, Alissa Roland, Maximilian Sluiter

Mechanical Engineering

The purpose of this project was to design a suspension that would improve the performance of the Cal Poly SAE Formula Electric car around a racing track Performance would be quantified through skidpad, slalom, and straight-line acceleration tests as well as autocross lap times. The approach to meeting the objective was to increase the steady-state lateral acceleration and quicken the transient response while maintaining predictable handling so that the driver could extract maximum performance from the car.

The car uses round-section (motorcycle) tires at a large negative camber angle because the lateral force generated by a pair of negatively-cambered tires …

Cisco Rackmount Bracket Optimization, Michael Baldwin, Edwin Lee, Garrett Smith

Mechanical Engineering

No abstract provided.

Evs Sports Knee Brace Testing Machinefinal Design Report, Silvia Aguilar, Nick Mattison, Chris Mccarthy

Mechanical Engineering

The purpose of this document is to report on the development of a test machine for EVS’ Web and Axis knee braces. Between September 2012 and June 2013, Team CSN, comprising of Nick Mattison, Silvia Aguilar, and Chris McCarthy, have methodically planned, designed, built, and tested this machine. The overarching goal of this unique machine is to address the need for both hyperextension and fatigue testing. From here on out this report dives into details of the machine with an Appendix C reporting testing results of said knee braces.

Drape Forming Machine, Adam Johnson, Will Schlosser, Brian Miller

Mechanical Engineering

The goal of this project was to build a prototype machine that formed multiple sheets of debulked pre-preg OOA carbon fiber into a 2-foot long trapezoidal shape. The machine was required to do this process semi-automatically.

Rapid Decompression Containment System, Evan Domingue, Michelle Rudney, Daniel Trees

Mechanical Engineering

Cal Poly students; Evan Domingue, Michelle Rudney and Daniel Trees; are working with General Atomics Aeronautical Systems, Inc. (GA, ASI) and engineer John Wilcox to complete a senior project. The senior project is focused on finding a solution to meet the requirement set forth in MIL-HDBK 1791 4.2.5.2 for rapid decompression which requires cargo items to be designed with pressure relief devices or to be configured for air shipment as to prevent any part from becoming a projectile in the event of catastrophic loss of aircraft cabin pressure. The goal of this project is to design a safe, cost-effective, and …

Titan 130 Engine Aft-Mount, Woody Newell, Michael Haworth, Dylan Perry

Mechanical Engineering

No abstract provided.

Android App For General Aviation Ground Collision Avoidance, Corey Taylor Christiansen, Timothy Justin Dascomb, John Preston Cook

Mechanical Engineering

This project used ground collision avoidance algorithms developed by NASA's Dryden Flight Research Center to create an Android application that could be used by general aviation pilots. The application uses GPS and accelerometer data to calculate future trajectories and checks them against a terrain elevation map of the United States stored on the SD card. X-Plane, a flight simulator, was used for project testing.

Barbeque Grill Temperature Distribution Design Improvement, Peter Gobell, Connor Mcgill, Thomas Willson

Mechanical Engineering

Team License to Grill set out to asses Bull Outdoor Products, Inc.’s barbeques and quantify the apparent uneven temperature distribution or “hot spots” and “cold spots” across the grill. This testing was accomplished with the design and fabrication of a test fixture allowing for accurate and repeatable temperature collection across the barbeque. With results that matched the sponsor’s claims of hot and cold spots, an engineering model was made using heat transfer and thermodynamic equations. Once the model somewhat resembled the experimental data, it was used to suggest different modifications that would allow for better temperature distribution. It was discovered …

Adaptive Golf Device, Nick Baker, Katie Delaurentis, Grant Martens, Liz Allison

Mechanical Engineering

Our primary objective was to design a golf device that enables its user, who has limited leg movement and control, to be able to produce a balanced golf swing. Ultimately, the device maximizes the golfer's independence, and increases the accuracy of and power behind each shot. Specifically, the device was designed around the needs and requirements of Dr. Joshua Pate, Professor of Adapted Recreation at James Madison University. Dr. Pate has cerebral palsy limiting his lower body mobility and making it difficult for him to produce a balanced golf swing.

Stirling Engine - Bringing Electricity To Remote Locations, Joshua Dulin, Matthew Hove, Jonathan D. Lilley

Mechanical Engineering

This project report details the development of a prototype Stirling engine designed to be capable of running on many different heat sources.

On-Demand Labeling, Nathan Cheadle, Lorne Stoops, Tony Wang, Robert Zimmerman

Mechanical Engineering

No abstract provided.