Mechanical Engineering Commons^™

Comparative Analysis Of The Biaxial Mechanical Behavior Of Carotid Wall Tissue And Biological And Synthetic Materials Used For Carotid Patch Angioplasty, Alexey Kamenskiy, Iraklis I. Pipinos, Jason N. Mactaggart, Syed A. Jaffar Kazmi, Yuris A. Dzenis

Department of Mechanical and Materials Engineering: Faculty Publications

Patch angioplasty is the most common technique used for the performance of carotid endarterectomy. A large number of patching materials are available for use while new materials are being continuously developed. Surprisingly little is known about the mechanical properties of these materials and how these properties compare with those of the carotid artery wall. Mismatch of the mechanical properties can produce mechanical and hemodynamic effects that may compromise the long-term patency of the endarterectomized arterial segment. The aim of this paper was to systematically evaluate and compare the biaxial mechanical behavior of the most commonly used patching materials. We compared …

It’S Not What You Think: A Theory For Understanding The Lack Of Interest Among Domestic Students In The Engineering Phd, Michelle C. Howell Smith, Amanda L. Garrett, Ellen Weissinger, Namas Chandra

Department of Mechanical and Materials Engineering: Faculty Publications

We live in a fast-paced world surrounded by technological advances. Engineers with advanced skills perform important functions in our society. However we know very little about how engineers consider obtaining advanced education and skills. The purpose of this study is to understand and develop a theory explaining the process domestic engineers undergo in developing an interest in obtaining a PhD in engineering. Our research was guided by the following central research question: What is the theory that explains the process of developing interest in doctoral-level engineering education for engineers? We used qualitative, grounded theory methods, to investigate the process of …

Frequency Shifts In Plate Crystal Resonators Induced By Electric, Magnetic, Or Mechanical Fields In Surface Films, Nan Liu, J.S. Yang, Yuantai Hu, Xuedong Chen, Wei Jiang

Department of Mechanical and Materials Engineering: Faculty Publications

We study frequency shifts in plate crystal resonators with surface films. The films are multiphysical, including the effects of inertia, stiffness, intrinsic stress, piezoelectric coupling, and piezomagnetic coupling. Mindlin’s two-dimensional equations for a crystal plate with two elastic surface films are generalized to include the multiphysical effects of the films. They are used to study thickness-shear vibrations of a rotated Y-cut quartz plate with initial fields resulting from the mechanical, electric, and magnetic fields in the surface films. Frequency shifts caused by the initial fields are calculated and examined. Results show that plate crystal resonators with multiphysical surface films may …

A Few Transient Effects In At-Cut Quartz Thickness-Shear Resonators, Runyu Zhang, Hongping Hu

Department of Mechanical and Materials Engineering: Faculty Publications

We study a few transient effects of AT-cut quartz thickness-shear resonators, including resonator turning on and turning off as well as voltage amplitude and frequency fluctuations. Mindlin’s two-dimensional plate equations are used and solved analytically. Both a sudden change and a gradual change of the driving voltage are studied. It is found that for a resonator with a frequency of 1.649430868 MHz and material quality factor of Q = 10⁵, the characteristic time scale of the transient effects is of the order of 0.1 s.

Use Of Environmental Scanning Electron Microscopy For In Situ Observation Of Interaction Of Cells With Micro- And Nanoprobes, Alexander Goponenko, B. J. Boyle, K. I. Jahan, Maxim V. Gerashchenko, Dmitri E. Fomenko, Vadim N. Gladyshev, Yuris A. Dzenis

Department of Mechanical and Materials Engineering: Faculty Publications

Precision intracellular sensing, probing and manipulation offer unprecedented opportunities for advances in biological sciences. Next-generation ultra-fine probes will be capable of targeting individual cell organelles. Development of such probes as well as probes capable of penetrating through tough cell walls requires detailed knowledge of cell-probe interaction. This Letter evaluated the applicability of environmental scanning electron microscopy (ESEM) for cell and cell-probe interaction imaging. Several types of cells (plant and yeast cells as well as mouse spermatozoa) were successfully imaged in their natural state, with mouse spermatozoa observed by ESEM for the first time. Computerized stage applied to image was tough …

Nanomechanical Analysis Of Insulinoma Cells After Glucose And Capsaicin Stimulation Using Atomic Force Microscopy, Ruiguo Yang, Ning Xi, King Wai-Chu Lai, Bei-Hua Zhong, Carmen Kar-Man Fung, Chen-Geng Qu, Donna H. Wang

Department of Mechanical and Materials Engineering: Faculty Publications

Aim: Glucose stimulates insulin secretion from pancreatic islet β cells by altering ion channel activity and membrane potential in the β cells. TRPV1 channel is expressed in the β cells and capsaicin induces insulin secretion similarly to glucose. This study aims to investigate the biophysical properties of the β cells upon stimulation of membrane channels using an atomic force microscopic (AFM) nanoindentation system.

Methods: ATCC insulinoma cell line was used. Cell stiffness, a marker of reorganization of cell membrane and cytoskeleton due to ion channel activation, was measured in real time using an integrated AFM nanoindentation system. Cell height that …

The Relation Between The Arterial Stress And Restenosis Rate After Coronary Stenting, Linxia Gu, Shijia Zhao, Aswini K. Muttyam, James M. Hammel

Department of Mechanical and Materials Engineering: Faculty Publications

Two commercially available stents (the Palmaz–Schatz (PS) and S670 stents) with reported high and low restenosis rates, respectively, have been investigated in this paper. Finite element models simulating the stent, plaque, and artery interactions in 3 mm stenosed right coronary arteries were developed. These models were used to determine the stress field in artery walls after stent implantation. The material properties of porcine arteries were measured and implemented in the numerical models. The stress concentration induced in the artery by the PS stent was found to be more than double that of the S670 stent. It demonstrated a good correlation …

Steady-State Green’S Function Solution For Moving Media With Axial Conduction, A. Haji-Sheikh, J. V. Beck, Kevin D. Cole

Department of Mechanical and Materials Engineering: Faculty Publications

The objective of this presentation is the development of a generalized steady-state Green’s function solution to study the temperature field in moving bodies. This type of solution permits the inclusion of different nonhomogeneous boundary conditions, volumetric heat sources, and possible position-dependent thermophysical properties. Although the mathematical formulation is for moving solids, it can be used to study the heat transfer in a moving fluid with a non-uniform velocity distribution passing through a micro-channel or fluid-saturated porous ducts. Additionally, this presentation includes the application of this Green’s function solution to acquire numerical information for selected examples to further illustrate the numerical …

Steady-Periodic Heating In Parallel-Plate Microchannel Flow With Participating Walls, Kevin D. Cole

Department of Mechanical and Materials Engineering: Faculty Publications

Simulations are presented for thermal sensing of steady laminar flow in a parallel-plate microchannel. Steady-periodic heating is introduced at the channel wall and temperatures are reported at upstream and downstream locations to represent temperature sensors. Exact analytical expressions for the temperature are given in the form of integrals, and numerical values are found by quadrature. Because axial conduction is prominent, there is a well-defined measurable flow range associated with each thermal-sensor geometry. Various fluid-flow rates, heating frequencies, sensor locations, and wall properties are explored. The results are given as a design correlation which shows the extent to which a given …

Luminescence Enhancement Of Cdte Nanostructures In Laf3:Ce/Cdte Nanocomposites, Mingzhen Yao, Xing Zhang, Lun Ma, Wei Chen, Alan G. Joly, Jinsong Huang, Qingwu Wang

Department of Mechanical and Materials Engineering: Faculty Publications

Radiation detection demands new scintillators with high quantum efficiency, high energy resolution, and short luminescence lifetimes. Nanocomposites consisting of quantum dots and Ce³⁺ doped nanophosphors may be able to meet these requirements. Here, we report the luminescence enhancement of LaF₃:Ce/CdTe nanocomposites which were synthesized by a wet chemistry method. CdTe quantum dots in LaF₃:Ce/CdTe nanocomposites are converted into nanowires, while in LaF₃ /CdTe nanocomposites no such conversion is observed. As a result, the CdTe luminescence in LaF₃:Ce/CdTe nanocomposites is enhanced about five times, while in LaF₃ /CdTe nanocomposites no enhancement was …

Directional Annealing-Induced Texture In Melt-Spun (Sm12Co88)99Nb1 Alloy, Tanjore V. Jayaraman, P. Rogge, Jeffrey E. Shield

Department of Mechanical and Materials Engineering: Faculty Publications

Developing texture in nanocrystalline permanent magnet alloys is of significant importance. Directional annealing is shown to produce texture in the permanent magnet alloy (Sm₁₂Co₈₈)₉₉Nb₁. Melt spinning produced isotropic grain structures of the hard magnetic metastable SmCo₇ phase, with grain sizes of ∼300 nm. Conventional annealing of melt-spun (Sm₁₂Co₈₈)₉₉Nb₁ alloy produced Sm₂Co₁₇ phase with random crystallographic orientation. Directional annealing of melt-spun (Sm₁₂Co₈₈)₉₉Nb₁ alloy, with appropriate combinations of annealing temperature and translational velocity, produced Sm_{2 …}

Effects Of A Mass Layer With Gradually Varying Thickness On A Quartz Crystal Microbalance, Nan Liu, Jiashi Yang, Weiqiu Chen

Department of Mechanical and Materials Engineering: Faculty Publications

We study the effects of the nonuniform thickness of a thin mass layer on a quartz crystal microbalance. A theoretical analysis is performed on thickness-shear vibration of an AT-cut quartz plate with a nonuniform mass layer. Mindlin’s two-dimensional equation for thickness-shear vibration of a quartz plate is used. Free vibration frequencies and modes are obtained. The effects of the mass layer nonuniformity are examined. It is shown that resonant frequencies and energy trapping of thickness-shear modes are sensitive to mass layer nonuniformity.

Finite Element Analysis Of Cracks In Aging Aircraft Structures With Bonded Composite-Patch Repairs, Linxia Gu, Ananth Ram Mahanth Kasavajhala, Shijia Zhao

Department of Mechanical and Materials Engineering: Faculty Publications

Bonded composite-patch repair has been used to transfer load from cracked structures to the reinforcement such that subsequent crack propagation is reduced. In this study,the mechanical behavior of a single edge v-notch A17075-T6 plate repaired with 1-ply and 4-ply composite patches was investigated through the finite element method. Contour integral method was used to define and evaluate the stress intensity factors at the crack tip. The effect of the adhesive epoxy film, patch material, thickness and ply orientations on the evolution of the stress intensity factor (SIF) of the repaired structure was examined. The results indicated that the SIF of …

Thermal Models Of Railroad Wheels And Bearings, Kevin D. Cole, Constantine M. Tarawneh, Arturo A. Fuentes, B. M. Wilson, L. Navarro

Department of Mechanical and Materials Engineering: Faculty Publications

The rolling surface for railroad wheels can be a heat source that may have an impact on the performance of the wheel bearing. In this study, experimental data from an electrically-heated railroad wheel set is analyzed by constructing thermal models of the wheel set. A steady finite-element model, a steady-analytical model, and a transient lumped-parameter model are discussed. Model parameters are determined from careful comparisons with the experimental data. The lumped-parameter model given here is intended as a simple predictive tool for determining when wheel heating caused by rail operations will have an impact on bearing temperature. The model parameters …

Method Of Transferring Strained Semiconductor Structure, Michael Nastasi

Department of Mechanical and Materials Engineering: Faculty Publications

The transfer of strained semiconductor layers from one substrate to another substrate involves depositing a multilayer structure on a substrate having surface contaminants. An interface that includes the contaminants if formed in between the deposited layer and the substrate. Hydrogen atoms are introduced into the structure and allowed to diffuse to the interface. Afterward, the deposited multilayer structure is bonded to a second substrate and is separated away at the interface, which results in transferring a multilayer structure from one substrate at least one strained semiconductor layer and at least one strain-induced seed layer. The strain-induced seed layer can be …

Imprinting Polymerfilm On Patterned Substrate, Li Tan, Yen-Peng Kong, Stella W. Pang, Albert F. Yee

Department of Mechanical and Materials Engineering: Faculty Publications

A method of applying a pattern on a topography includes first applying a polymer film to an elastormer member, such as PDMS, to form a pad. The pad is then applied to a substrate having a varying topography under pressure. The polymer film is transferred to the substrate due to the plastic deformation of the polymer film under pressure compared to the elastic deformation of the PDMS member pulls away from the polymer layer, thereby depositing the polymer layer, thereby depositing the polymer layer upon the substrate.

Steady-Periodic Heating Of A Cylinder, Kevin D. Cole, Paul E. Crittenden

Department of Mechanical and Materials Engineering: Faculty Publications

Steady periodic heating is an important experimental technique for measurement of thermal properties. In these methods the thermal properties are deduced from a systematic comparison between the data (such as temperature) and a detailed thermal model. This paper addresses steady-periodic heat transfer on cylindrical geometries with application to thermal-property measurements. The method of Green’s functions is used to provide a comprehensive collection of exact analytical expressions for temperature in cylinders. Five kinds of boundary conditions are treated for one-, two-, and three-dimensional geometries. For some geometries an alternate form of the Green’s function is given, which can be used for …

Flexible Electronics Using Ion Implantation To Adhere Polymer Substrate To Single Crystal Silicon Substrate, Terry L. Alford, Douglas C. Thompson Jr., Hyunchul Kim, Michael A. Nastasi, James W. Mayer, Daniel Adams

Department of Mechanical and Materials Engineering: Faculty Publications

An electronic apparatus uses a single crystalline silicon Substrate disposed adjacent to a flexible substrate. The electronic apparatus may be a flexible flat panel display, or a flexible printed circuit board. The flexible substrate can be made from polymer, plastic, paper, flexible glass, and stainless steel. The flexible substrate is bonded to the single crystalline substrate using an ion implantation process. The ion implantation process involves the use of a noble gas Such as hydrogen, helium, Xenon, and krypton. A plurality of semiconductor devices are formed on the single crystalline silicon Substrate. The semi conductor devices may be thin film …

Analysis Of Flux-Base Fins For Estimation Of Heat Transfer Coefficient, Kevin D. Cole, C. Tarawneh, B. Wilson

Department of Mechanical and Materials Engineering: Faculty Publications

Exact solutions are given for the transient temperature in flux-base fins with the method of Green’s functions (GF) in the form of infinite series for three different tip conditions. The speed of convergence is improved by replacing the steady part by a closed-form steady solution. For the insulated-tip case, a quasi-steady solution is presented. Numerical values are presented and the conditions under which the quasi-steady solution is accurate are determined. An experimental example is given for estimation of the heat transfer coefficient (HTC) on a non-rotating roller bearing, in which the outer bearing race is treated as a transient fin.

Computational Model For Predicting Nonlinear Viscoelastic Damage Evolution In Materials Subjected To Dynamic Loading, Flavio V. Souza, Yong-Rak Kim, George A. Gazonas, David H. Allen

Department of Mechanical and Materials Engineering: Faculty Publications

Many inelastic solids accumulate numerous cracks before failure due to impact loading, thus rendering any exact solution of the IBVP untenable. It is therefore useful to construct computational models that can accurately predict the evolution of damage during actual impact/dynamic events in order to develop design tools for assessing performance characteristics. This paper presents a computational model for predicting the evolution of cracking in structures subjected to dynamic loading. Fracture is modeled via a nonlinear viscoelastic cohesive zone model. Two example problems are shown: one for model validation through comparison with a one-dimensional analytical solution for dynamic viscoelastic debonding, and …

Effects Of Aggregate Structure On Hot-Mix Asphalt Rutting Performance In Low Traffic Volume Local Pavements, Yong-Rak Kim, Hee Mun Park, Francisco Thiago Sacramento Aragão, Jamilla Emi Sudo Lutif

Department of Mechanical and Materials Engineering: Faculty Publications

The objective of this study is to evaluate the effect of mix gradations associated with the Superpave restricted zone on rutting potential specifically for low traffic volume roadways. Although the elim-ination of the restricted zone requirement in Superpave mix design is highly recommended, some questions still remain unanswered as the research conclusions supporting the elimination of the re-stricted zone were largely made for medium to high traffic volume roadways, where aggregates are highly crushed and of good quality. The applicability of such research conclusions based on high traffic volume mixes needs to be verified for low volume mixes because many …

Comparison Of Fuzzy Clustering Methods And Their Applications To Geophysics Data, David J. Miller, Carl A. Nelson, Molly Boeka Cannon, Kenneth P. Cannon

Department of Mechanical and Materials Engineering: Faculty Publications

Fuzzy clustering algorithms are helpful when there exists a dataset with subgroupings of points having indistinct boundaries and overlap between the clusters. Traditional methods have been extensively studied and used on real-world data, but require users to have some knowledge of the outcome a priori in order to determine howmany clusters to look for. Additionally, iterative algorithms choose the optimal number of clusters based on one of several performance measures. In this study, the authors compare the performance of three algorithms (fuzzy c-means, Gustafson-Kessel, and an iterative version of Gustafson-Kessel) when clustering a traditional data set as well as real-world …

Experimental Investigation Of A Novel Blast Wave Mitigation Device, Zhenbi Su, Wen Peng, Zhaoyan Zhang, George Gogos, Reed Skaggs, Bryan Cheeseman, Chian Fong Yen

Department of Mechanical and Materials Engineering: Faculty Publications

A novel blast wave mitigation device was investigated experimentally in this paper. The device consists of a pistoncylinder assembly. A shock wave is induced within the cylinder when a blast wave impacts on the piston. The shock wave propagates inside the device and is reflected repeatedly. The shock wave propagation process inside the device lengthens the duration of the force on the base of the device to several orders of magnitude of the duration of the blast wave, while it decreases the maximum pressure over an order of magnitude. Two types of experiments were carried out to study the blast …

Experiments And Models For The Thermal Response Of Railroad Tapered-Roller Bearings, Constantine M. Tarawneh, Kevin D. Cole, Brent M. Wilson, Fadi Alnaimat

Department of Mechanical and Materials Engineering: Faculty Publications

The need to understand and quantify the heat transfer paths within tapered-roller bearings is of great importance in the railroad industry since bearing cup temperature measurement is the primary tool utilized in the removal of distressed bearings from service. Experiments were performed to acquire temperature histories at several locations on a stationary bearing subjected to heat sources imbedded in two rollers. The experimental results were compared to zero- and first-order thermal models to estimate overall heat transfer coefficients from the bearing. The results presented here can be used to explain some of the mechanisms that lead to overheating of tapered-roller …

Flush-Mounted Steady-Periodic Heated Film With Application To Shear-Stress Measurement, Kevin D. Cole

Department of Mechanical and Materials Engineering: Faculty Publications

Surface-mounted heated films have been used for fluid-flow measurement for many years. Recently unsteady heating of such surface films has been explored experimentally. In this paper steady-periodic heating of a surface-mounted film is studied analytically. Wall effects and axial heat conduction in the fluid are included. The temperature is found as an exact integral expression constructed from separate Green’s function formulations in the fluid flow and in the solid wall that are matched at the fluid-solid interface. Results for temperature, obtained by quadrature, are reported for several flow speeds and several steady-periodic frequencies. The results show that steady-periodic heating has …

Finite Element Analysis Using Nonconforming Mesh, Ashok V. Kumar, Ravi Buria, Sanjeev Padmanabhan, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

A method for finite element analysis using a regular or structured grid is described that eliminates the need for generating conforming mesh for the geometry. The geometry of the domain is represented using implicit equations, which can be generated from traditional solid models. Solution structures are constructed using implicit equations such that the essential boundary conditions are satisfied exactly. This approach is used to solve boundary value problems arising in thermal and structural analysis. Convergence analysis is performed for several numerical examples and the results are compared with analytical and finite element analysis solutions to show that the method gives …

High-Impact, Energy-Absorbing Vehicle Barrier System : United States Patent 7,410,320 B2, Ronald K. Faller, Dean L. Sicking, John R. Rohde, John D. Reid, Robert W. Bielenberg, James C. Holloway, Karla A. Polivka

Department of Mechanical and Materials Engineering: Faculty Publications

A high-impact, energy-absorbing vehicle barrier system generally includes a substantially rigid outer containment wall coupled via strap assemblies with an energy-absorbing inner impact wall, and energy-absorbing cartridges strategically positioned between the impact wall and containment wall. The impact wall is constructed of a number of tubes coupled with one another to present a substantially smooth, unifonn surface to passing vehicles. The energy-absorbing cartridges generally consist of a foam member or a number of foam sheets which compress and crush between the containment wall and impact wall to absorb energy from an errant vehicle striking the face of the impact wall, …

Method And Apparatus For Noncontact Relative Rail Displacement, Track Modulus And Stiffness Measurement By A Moving Rail Vehicle: Us Patent No. Us 7,403,296 B2, Shane Farritor, Richard Arnold, Chris Norman

Department of Mechanical and Materials Engineering: Faculty Publications

An on-board, noncontact measurement system and method is disclosed for measuring track quality, vertical track stiffness and vertical track modulus for a portion of track underlying the rail vehicle. The system comprises first and second optical emitters mounted to the vehicle and configured to emit beams of light that are detectable on the underlying surface; a camera mounted to the vehicle for recording the distance between the beams of light as the vehicle travels along the surface, a mechanism for measuring the distance between the beams of light for a particular portion of the surface; and a mechanism for determining …

Subcritical And Supercritical Droplet Evaporation Within A Zero-Gravity Environment: Low Weber Number Relative Motion, Hongtao Zhang, Vasudevan Raghavan, George Gogos

Department of Mechanical and Materials Engineering: Faculty Publications

A validated comprehensive axisymmetric numerical model, which includes the high pressure transient effects, variable thermo-physical properties and inert species solubility in the liquid phase, has been employed to study the evaporation of moving n-heptane droplets within a zero-gravity nitrogen environment, for a wide range of ambient pressures and initial freestream velocities. At the high ambient temperature considered (1000 K), the evaporation constant increases with the ambient pressure. At low ambient pressure, the evaporation constant becomes almost a constant during the end of the lifetime. At high ambient pressures, the transient behavior is present throughout the droplet lifetime. The final penetration …

Surgical Camera Robot: United States Patent No. Us 7,339,341 B2, Dmitry Oleynikov, Shane Farritor, Mark E. Rentschler, Stephen R. Platt, Jason Dumpert

Department of Mechanical and Materials Engineering: Faculty Publications

The present invention is a miniature camera robot which can be placed entirely within an open space such as an abdominal cavity. The instant camera robot has pan and tilt capabilities, an adjustable focus camera, and a support component for supporting the robot body. In particular embodiments, the camera robot further contains a light source for illumination and a handle to position the camera robot. A system and method for using the instant camera robot are also provided.