Mechanical Engineering Commons^™

A Variational Approach To Non-Newtonian Flow In Angular Pores: An Application To Enchanced Oil Recovery, Nithin Kavoori

Open Access Theses & Dissertations

With an alarming rise in carbon dioxide (CO2) emission from anthropogenic sources, CO2 sequestration has become an attractive choice to mitigate the emission. Some popular storage media for CO2 are oil reservoirs, deep coal-bed, deep oceanic-beds. These have been used for the long term CO2 storage. Due to special lowering viscosity and surface tension property of CO2, it has been widely used for enhanced oil recovery. The sites for CO2 sequestration or enhanced oil recovery mostly consist of porous rocks. In this thesis work, I focus on understanding the flow through porous at pore-level using variational approach.

Variational approach is …

Computational Study Of Fluid-Valve Interaction Involving Deep Vein Thrombosis, Upendra Parimi

Open Access Theses & Dissertations

The venous valves in veins carry on the important function of eliminating the retrograde (re-verse) flow of blood in veins and help the veins to carry on their work effectively. The abnormal functioning of venous valves can cause deep vein thrombosis (DVT) which is a phenomena caused by clotting in deep veins. The importance of the thesis work lies in understanding the role of blood flow dynamics in Deep Vein Thrombosis (DVT). Elderly People and pregnant women are the ones who are most likely to develop DVT. It was determined from previous studies that women in their postpartum period are …

Effect Of Air Addition On Plasma-Based Reforming Of Methane And Propane, Atul Vitthalrao Ambhore

Open Access Theses & Dissertations

No abstract provided.

Retrofitting A Stereolithography System Within A Laminar Flow Hood, Mahesh Pandurang Tonde

Open Access Theses & Dissertations

This research focused on retrofitting the stereolithography (SL), a rapid prototyping technology, inside a laminar flow hood to provide an aseptic, particulate-free environment for scaffold fabrication. Two of the important objectives of this project were to retrofit the commercial SLA 250/30 inside a laminar flow hood to demonstrate that the manufacturability of the Bio-SL system was comparable to original SLA 250 system and to conduct the sterility test on fabricated scaffolds to show that the laminar flow hood was able to provide an aseptic, particulate-free environment for the fabrication.

An Investigation On The Mixing Hydrodynamics Of A Gas-Solid Fluidized Bed, Mario Alberto Ruvalcaba

Open Access Theses & Dissertations

In previous decades, the experimental and numerical studies of multiphase flows have remarkably increased especially gas-solid flows. Research of this type has abundant applications in energy, chemical processes, among others. Moreover, common applications include fluid catalytic cracking for petroleum refineries, fluidized bed reactors (type of chemical reactors), interface modification, such as applying a coating onto solid items, and an important technology breakthrough in coal gasification. The work presented on this thesis concentrates on the investigation of gas-solid flows utilizing Computational Fluid Dynamics (CFD) methods. The gas-solid flows studies performed on this investigation assumed the solid phase as a continuum with …

Insight Into The Physics Of Rupture: Dynamic Triggering Seismicity, Hector Gonzalez-Huizar

Open Access Theses & Dissertations

Seismic waves can trigger earthquakes and tremor at large distances from the causable event. Dynamic triggering occurs when the surface waves from large earthquakes change the stresses conditions on previously overstressed faults, promoting failure. To understand the causative stresses and environments behind dynamic triggering, we model the change in the stress field that the passing of Rayleigh and Love waves cause on a fault plane of arbitrary orientation relative to the direction of propagation of the waves, and apply a Coulomb failure criterion to calculate the potential of these stress changes to trigger seismicity. We apply our model to three …

Impacting Testing Of High Temperature Ceramics Through The Use Of A Vitiated Heater For Hot And Cold Fire Collisions, Adrian Trejo

Open Access Theses & Dissertations

Material testing is a crucial step during the design process as particular materials serve as safety and life saving conditions. In this study, a MoSi2 is chosen as the target specimen to undergo impact under high temperatures. An impact apparatus is designed and constructed for the purpose of propelling alumina particles at high velocities. A nozzle using compressed nitrogen gas is used to fire the particle at the desired velocities. Due to the possibility of thermal shock occurring at higher temperatures, a separate nozzle utilizing vitiation heating is designed to fire the particle at equally higher temperatures to prove the …

An Experimental Study Of The Hydrodynamics Of Multiphase Flow In Fluidized Beds, Gerardo Vargas

Open Access Theses & Dissertations

Fluidized bed reactors have been widely used as a gasifier in coal gasification processes to convert coal into other forms of energy. At this stage, full fluidization is required to attain the best thermochemical reaction within the fluid-solid mixture. This can only be achieved if the fluid is maintained between minimum fluidization and terminal velocities. To better understand the hydrodynamics of multiphase flow, a fluidized bed was designed and constructed to carry out the investigation. Compressed air and 1-mm glass beads were used to determine gas minimum fluidization and terminal velocities at three different particle concentrations. The solids were enclosed …

Laminar Burning Velocities Of Gas Mixtures, Vishwanath Reddy Ardha

Open Access Theses & Dissertations

In this study, burning velocities of hydrogen-carbon monoxide (H2-CO) mixtures, which are primary constituents of syngas fuels, are measured. The effect of different burner systems, H2 concentration, and different measurement techniques on the burning velocities of H2-CO mixtures is also discussed. The burning velocities of H2-CO mixtures increase with the increase in H2 content in the mixture. When compared with different burner systems using different methods, the burning velocity data almost coincide in the lean condition, but at rich condition the data stray away from each other. The burning velocities of actual syngas compositions (based on different sources of coal) …

Experimental Investigation Of A Meso-Scale Axial Flow Pump, Jonathon Ray Bice

Open Access Theses & Dissertations

The scope of this work involves the testing of an experimental meso-scale axial flow pump intended for use in micro-spacecraft and micro-satellites. A setup was implemented to test pressure and flow characteristics at different velocities for three configurations of the pump. In addition, an alternate setup was used to test torque and efficiency. Computational fluid dynamics simulations were also conducted. The results are presented and analyzed to determine whether the pump is a viable alternative for the space industry.

Flashback Propensity Of Gas Mixtures, Bidhan Kumar Dam

Open Access Theses & Dissertations

In this study, experimental measurements of flashback propensity of hydrogen (H2)-carbon monoxide (CO) mixtures, which are the primary constituents of syngas fuels, are described. The effects of H2 concentration, diluents and swirl on the flashback propensity of H2 CO flames are discussed. For boundary layer type flashback, the critical velocity gradient (gF) values of 5 to 95%, 15 to 85%, and 25 to 75% H2-CO mixtures somewhat agree with the scaling relation (g_F=c (S_L^2)/α) and yield an average c value of 0.038. At a lower SL2/α ratio, burner diameters have small effects on critical velocity gradient measurements; however, the effect …

Aluminum Hydride Compunds: A Theoretical And Experimental Spectroscopic Study, Layra E. Reza

Open Access Theses & Dissertations

None

An Impedance Model Approach For Adaptive Cruise Control, Xi Sun

Open Access Theses & Dissertations

The objective of this Thesis is to design an intelligent cruise controller for the motion control of a vehicle platoon and discuss the relationship between following distance and signal sampling frequency. For safe vehicle following, an Adaptive cruise control (ACC) law is considered in an impedance model based approach. The impedance model is developed to guide the dynamic behavior of the following vehicles. In order to assure the safety of the vehicle platoon, it is necessary to regulate the distance between vehicles at an appropriate value. The proposed control law uses relative speed and spacing as well as preceding acceleration …

Phase Change Cooling Applications - Engine Cooling, Kiran Kumar Katta

Open Access Theses & Dissertations

Waste heat recovery system composed of two phase cooling system, exhaust heat exchanger, and mini-turbine has been proposed by Henry Works, Inc to generate auxiliary power via harvesting engine cooling and exhaust heat loss from heavy duty vehicles. The objective of this research is to evaluate the two phase cooling system through the engine dynamometer test and obtain initial test data for the development of the waste heat recovery system. Engine dynamometer experiment for evaluating two phase cooling has been conducted using Perkins diesel engine. During two phase cooling phase, the coolant temperature showed less than 1 °C variation in …

Stereolithography Of Poly(Ethylene Glycol) Hydrogels With Application In Tissue Engineering As Peripheral Nerve Regeneration Scaffolds, Karina Arcaute

Open Access Theses & Dissertations

In recent years, rapid prototyping (RP) technologies initially developed to create prototypes prior to production for the automotive, aerospace, and other industries, have found applications in tissue engineering (TE). Several different RP technologies are being used to fabricate biocompatible 3D structures with controlled micro- and macro-scale characteristics. The focus of this research was to explore the capabilities of the RP technology, stereolithography (SL), for creating complex, 3D scaffolds with applications in TE using a photocrosslinkable biopolymer, poly(ethylene glycol) (PEG). The primary objective was to create an implantable multi-lumen nerve guidance conduit (NGC) for the regeneration of peripheral nerves.

Studies of …

Meso-Machining Of Miniature Space System Components, Carlos Ramirez

Open Access Theses & Dissertations

Many industries in engineering and science are focusing more on producing mechanisms and system components of magnitudes smaller than existing products. One of the major technologies associated with these demands is the development of meso scale precision manufacturing systems. Meso scale fabrication involves the scaling down of conventional machining to incorporate the use of familiar materials, such as aluminum, steel, and even titanium for machining miniature components. New techniques in meso scale fabrication allow for the machining of miniature space system components in an efficient manner to meet certain specifications. A description of the processes used to accurately machine a …