Mechanical Engineering Commons^™

Coal Gasification For Fuel Synthesis: Multiphysics Modeling And New Concepts, Jian Xu

Open Access Dissertations

Fuel synthesis through gasification of carbonaceous materials (e.g. coal and biomass) has the potential to provide a solution to the increasing demand for energy and liquid transportation fuels. To theoretically understand the complex physical and chemical processes in a gasifier and to identify the most influential parameters for syngas production, we first developed a multi-physics and multi-scale model to simulate the gasification processes in a well-stirred reactor. This model is the first of its kind and considers detailed gas-phase chemistry, particle-phase reactions, moisture drying, devolatilization, porous structure evolution, convective and radiative heat transfer, as well as full coupling between the …

Development Of Methodologies For Evaluating Performance Of Fault Detection And Diagnostics Protocols Applied To Unitary Air-Conditioning Equipment, David P. Yuill

Open Access Dissertations

This thesis describes the development of standardized methodologies and methods for evaluating the performance of fault detection and diagnostics (FDD) protocols that are intended for air-cooled vapor compression unitary air-conditioners. Although there are currently many FDD protocols available commercially and there are jurisdictions in which the building codes require FDD, there is currently no standardized method to determine how effective the FDD might be at detecting and diagnosing faults.^ An FDD evaluation method is proposed, in which the evaluator passes data from a large number of scenarios to a candidate FDD protocol, and collects the responses from each scenario. The …

Ultrashort Laser Pulse-Matter Interaction: Fundamentals And Early Stage Plasma Dynamics, Xin Zhao

Open Access Dissertations

Despite extensive studies for many years, the detailed mechanisms of ultrashort laser pulse (USLP)-matter interaction are still not fully understood and further fundamental investigation is required. This study seeks to provide an improved understanding of the USLP-material interaction by both theoretical and experimental investigations and to find ways to enhance laser energy coupling with different materials.^ A two-dimensional comprehensive hydrodynamic model for USLP ablation of metals and semiconductors is developed in this study. The model comprises a two-temperature model and a hydrodynamic model supplemented with a quotidian equation of state model, considering the relevant multiphysical phenomena during the laser-matter interaction. …

Unsteady Flamelet Progress Variable Modeling Of Reacting Diesel Jets, Muhsin Mohammed Ameen

Open Access Dissertations

Accurate modeling of turbulence/chemistry interactions in turbulent reacting diesel jets is critical to the development of predictive computational tools for diesel engines. The models should be able to predict the transient physical and chemical processes in the jets such as ignition and flame lift-off. In the first part of this work, an existing unsteady flamelet progress variable (UFPV) model is employed in Reynolds-averaged Navier-Stokes (RANS) simulations and large-eddy simulations (LES) to assess its accuracy. The RANS simulations predict that ignition occurs toward the leading tip of the jet, followed by ignition front propagation toward the stoichiometric surface, and flame propagation …

Droplet Behavior On Superhydrophobic Surfaces: Interfaces, Interactions, And Transport, Susmita Dash

Open Access Dissertations

The primary objective of the present work is to study droplet dynamics on smooth hydrophobic and textured superhydrophobic surfaces, and to understand the dependence of interfacial interaction mechanisms on surface morphology. ^ A detailed understanding of the dynamics of droplet response to an applied electric field is essential for implementation of electrowetting techniques in various devices. In the first part of the thesis, a systematic study of the transient response in terms of contact angle and contact radius of a sessile droplet on a smooth hydrophobic surface under electrical actuation is presented. A scaling analysis predicts the response time of …

Granular Matter: Microstructural Evolution And Mechanical Response, Aashish Ghimire, Ishan Srivastava, Timothy S. Fisher

The Summer Undergraduate Research Fellowship (SURF) Symposium

Heterogeneous (nano) composites, manufactured by the densification of variously sized grains, represent an important and ubiquitous class of technologically relevant materials. Typical grain sizes in such materials range from macroscopic to a few nanometers. The morphology exhibited by such disordered materials is complex and intricately connected with its thermal and electrical transport properties. It is important to quantify the geometric features of these materials and simulate the fabrication process. Additionally, granular materials exhibit complex structural and mechanical properties that crucially govern their reliability during industrial use. In this work, we simulate the densification of soft deformable grains from a low-density …

Visualizing Mechanics: Educational Videos Demonstrating Core Mechanics Concepts, Camilo Schrader, Jeffrey Rhoads, Charles M. Krousgrill, Stephen Alex Stamm, Elizabeth Bushman

The Summer Undergraduate Research Fellowship (SURF) Symposium

There has been an increased interest in using technology to relay information over the past 20 years. This interest has been reflected in the way the internet has expanded to incorporate nearly-uncountable numbers of blogs, streaming videos, and discussion forums. Recent research has shown that younger generations of students prefer internet-based platforms such as these to communicate and learn, as they are congruent with a visual style of learning. The present study seeks to fuse the predominantly reflective and intuitive methods found in a traditional lecture with the more visual and active modes of learning to provide a larger range …

Porphyrin Interaction With Dna-Based Carbon Nanotubes And Regeneration For Light Harvesting, Sawyer E. Morgan, Hanyu Zhang, Jong Hyun Choi

The Summer Undergraduate Research Fellowship (SURF) Symposium

Limitations to current solar cells include the high cost of pure silicon and poor current transfer within cells. An emerging alternative is single-walled carbon nanotubes (SWCNTs), which when combined with DNA and porphyrin chromophores can generate a current when absorbing light. We sought to find a chromophore and conditions that would promote bonding to the SWCNTs and improve light harvesting, while being able to regenerate on the film after being damaged. This was experimentally tested by first making SWCNT films on conducting glass slides. These were then functionalized in solutions of chromophore and spectra were measured to determine the bonding …

Design Of A Small Scale Roll To Roll Device, Amon A. Pereira, Edward White, Rebecca Krone Kramer

The Summer Undergraduate Research Fellowship (SURF) Symposium

In the soft robotics field, hyperelastic polymer films are used in conjunction with eutectic gallium indium to create flexible strain gages. However, rapid large scale manufacturing methods of such sensors have yet to be developed.

Developing new manufacturing methods will allow for researchers to build and test new soft sensor concepts faster but also pave the way for future mass-production of these sensors for consumer or industrial consumption.

One of those methods would be a Roll to Roll System (R2R) similar to those used to in the publication industry. In this context, Polyethylene terephthalate (PET) film rolls will be used …

Development Of Integration Software For Multiple Inkjet Functionalization Systems, Jieyu Lu, J. William Boley, George T.-C. Chiu

The Summer Undergraduate Research Fellowship (SURF) Symposium

Inkjet printing is widely used in functional product manufacturing. Performing a printing task requires communication and synchronization among multiple subsystems (e.g. motion and drop ejection), which introduces complexity in the overall printing system. A user interface has been developed, which enables users to input printing parameters and patterns for printing functional materials. The interface then sends commands to the controllers that execute the printing process. The software can also be expanded to carry out standard experiments for functional printing research and characterization. Moreover, the software is transferable to multiple systems. One application explored using the software is drug anti- counterfeiting …

Microstructure Development Of Granular System During Compaction, Chen Shang, Marcial Gonzalez

The Summer Undergraduate Research Fellowship (SURF) Symposium

Granular materials is the second most manipulated material in the industry today. They are easy to transport and more and more newly developed materials cannot stand the process of traditional casting, like energetic materials and bio-materials, but will survive the powder compaction process. Having a better understanding of the microstructure development of granular systems during compaction process, especially for particles that will heavily deform under loading, will give an insight of how to better process the powders to produce materials with overall better performance comparing to bulk materials. The main theory and mechanism applied are Hertz law and nonlocal contact …

Development Of Combined Dual-Pump Vibrational And Pure-Rotational Coherent Anti-Stokes Raman Scattering (Dpvcars And Prcars) System, Shenli Yuan, Aman Satija, Robert Lucht

The Summer Undergraduate Research Fellowship (SURF) Symposium

Coherent anti-Stokes Raman scattering (CARS) [1,2] is a spatially-resolved, time-resolved spectroscopic technique for quantitative measurements in reacting flows [3 – 6]. This work demonstrates a combination of N₂/O₂/CO₂ dual-pump vibrational coherent anti-Stokes Raman scattering (DPVCARS) system and two-beam pure-rotational coherent anti-Stokes Raman scattering (PRCARS) system. It is based on the previous development of combined VCARS and PRCARS system which was used to obtain temperature measurements in non-premixed H₂-air flames. The new combined system will be used to measure the temperature profiles and major species concentrations such as N₂/O₂/CO_{2 …}

Motion Control Of Robotic Arm With Command Shaping Method, Yumeng Wu, Peter H. Meckl, Alok Agrawal

The Summer Undergraduate Research Fellowship (SURF) Symposium

In the manufacturing industry, lots of rapid point-to-point motion is required while the residual vibration is unfavorable. Residual vibrations caused by flexible elements are limiting the performance of mechanical system, especially when the system needs to make rapid point-to-point motion. As proved in earlier studies, avoiding natural frequencies of the mechanical system reduces the residual vibrations. This work is based on a non-linear, two-link flexible jointed robot with configuration dependent resonance. Command shaping method consisting different combinations of base functions and weighting factors are compared in this work. The compatibility of command shaping with classical feedback control structure allows a …

Improved Microrobotic Control Through Image Processing And Automated Hardware Interfacing, Archit R. Aggarwal, Wuming Jing, David J. Cappelleri

The Summer Undergraduate Research Fellowship (SURF) Symposium

Untethered submilliliter-sized robots (microrobots) are showing potential use in different industrial, manufacturing and medical applications. A particular type of these microrobots, magnetic robots, have shown improved performance in power and control capabilities compared to the other thermal and electrostatic based robots. However, the magnetic robot designs have not been assessed in a robust manner to understand the degree of control in different environments and their application feasibility. This research project seeks to develop a custom control software interface to provide a holistic tool for researchers to evaluate the microrobotic performance through advance control features. The software deliverable involved two main …

Modeling Of Mixed Friction Interactions Occurring In Axial Piston Pumps, Andrew C. Adelsperger, Lizhi Shang, Dan Mizell, Monika Ivantysynova

The Summer Undergraduate Research Fellowship (SURF) Symposium

Axial piston pumps are integral to a variety of hydraulic systems due to their versatility and reliability, but most attempts to model them for design purposes have failed. However, software which fully models the fluid structures within these pumps, such as the FSTI gap design program, has improved significantly. Unfortunately, current discrepancies between simulated and measured friction forces on the cylinder due to the fluid drag and piston movement need to be eliminated so that more accurate simulation of these pumps in operation is possible. Friction measurements and FSTI simulation outputs were analyzed with MATLAB filters and graphs, resulting in …

Thermal Properties Of Soft Nanomaterials: Materials Synthesis And Fabrication, Meng Pan, Collier Miers, Amy Marconnet, Yu Han

The Summer Undergraduate Research Fellowship (SURF) Symposium

The properties of soft nanomaterials are hard to measure exactly due to their mechanical properties and unstable shape. In particular, hydrogels are a class of cross-linked polymers that can absorb large quantities of water changing their shape under the influence of various conditions such as humidity, temperature, and pH. This research addresses the fabrication of a material that has a significant contrast in properties under different conditions (e.g. temperature, wetting, and pH) and determine the physical mechanisms of heat transfer in this nanomaterial. The hydrogels are made using a several cycles of a freeze-thaw method. The method requires soluble material. …

Radiation Measurements And Data Analysis Of Turbulent Premixed Lean Flame, Yunzhe Yang, Dong Han, Jay P. Gore

The Summer Undergraduate Research Fellowship (SURF) Symposium

An accurate understanding of the radiation transfer in turbulent premixed lean flame is critical for improving energy efficiencies and reducing emissions such as nitric oxide and soot. Radiation measurement is an effective and nonintrusive way to study the radiation properties of turbulent premixed lean flames. In this study, a high-speed infrared camera was utilized to measure the planar radiation from turbulent premixed lean flames under different conditions. Time-dependent flame images were acquired and radiation statistics were calculated and compared to investigate the effects of equivalence ratio, heat release rate, hydrogen pilot flame rate, and co-flow rate on the radiation intensity …

The Role Of Surface Area In Catalytic Gasification Of Biomass, Elizabeth A. Wachs, Nitish Kumar, Indraneel Sircar, Prithviraja Basak, Jay P. Gore Phd

The Summer Undergraduate Research Fellowship (SURF) Symposium

Gasification of biomass has the potential to provide a carbon-negative source of liquid fuels. The current limited use of gasification is due in part to the high temperatures necessary to achieve high conversion levels. These temperatures can be lowered by the use of catalysts, but the mechanisms by which catalysts affect the reaction rate are not fully understood. Here, the structural component of potassium carbonate’s role in the gasification process was examined. Samples of pinewood sawdust were impregnated with potassium carbonate, then pyrolyzed with N2 in a fixed bed reactor at 750°C (heater thermocouple reading). Half of the char was …

Preliminary Testing Of Plasma-Induced Combustion, Ahmed Thalib Razi, Carson Slabaugh, Robert Lucht

The Summer Undergraduate Research Fellowship (SURF) Symposium

Plasma-induced combustion (PIC) has been shown to improve the reliability, efficiency, and delay time of ignition in flight systems like augmentors and scramjets. These high-velocity systems are mostly used in military applications, and improvement may help commercial viability. To understand this chemical process, the concentration of radicals, particularly H radicals, must be tracked through the flame using laser diagnostics. This requires a steady source of plasma-assisted combustion to be secured and well-understood. A plasma torch flowing partially premixed air and methane was installed and successfully operated, and preliminary testing was carried out. Primarily it was observed that PIC created stable …

Thermal Properties Of Soft Nanomaterials: Thermal Measurement Design, Yu Han, Meng Pan, Amy Marconnet, Collier Miers

The Summer Undergraduate Research Fellowship (SURF) Symposium

Soft materials like hydrogels have multiple tunable material properties because of their unique structures. Due to the ability to respond to stimuli like temperature or chemical environment, they have numerous applications in different fields like delivering drugs inside the human body and other medical uses. Details of the thermal transport mechanisms, as well as the overall thermal properties, are critical for a variety of applications. Multi-property measurements elucidate the underlying transport mechanisms in the soft materials. This research demonstrates a new methodology of measuring thermal properties of soft materials. This work uses the 3w method [1,2] for measuring the thermal …

Study Of A Generalized Empirical Model For Predicting Pressure Drop For Internal Flows, Tejas Anup Pant

Open Access Theses

A generalized empirical model for estimating the pressure drop across a channel for a given massflow rate is studied through computational fluid dynamics (CFD) simulations. It is observed that for developing laminar and turbulent flow through channels and pipes of arbitrary cross-section, the variation in the pressure drop between any two points in the flow direction with massflow rate can be well approximated by a second degree expression in massflow rate which is referred to as the empirical model in this study. In the first part of this study, a correlation between the pressure gradient and the massflow rate is …

Synthesis And Characterization Of Bulk Metallic Glasses Prepared By Laser Direct Deposition, Xiaoyang Ye

Open Access Theses

Fe-based and Zr-based metallic glasses have attracted extensive interest for structural applications due to their excellent glass forming ability, superior mechanical properties, unique thermal and corrosion properties. In this study, the feasibility of synthesizing metallic glasses with good ductility by laser direct deposition is explored. Both in-situ synthesis with elemental powder mixture and ex-situ synthesis with prealloyed powder are discussed. Microstructure and properties of laser direct deposited metallic glass composites are analyzed.^ Synthesis of Fe-Cr-Mo-W-Mn-C-Si-B metallic glass composite with a large fraction of amorphous phase was accomplished using laser direct deposition. X-ray diffraction (XRD) and transmission electron microscopy investigations revealed …

Investigation Of The Influence Of Gravitational Body Force Effects On Critical Heat Flux For Flow Boiling With Subcooled And Two-Phase Inlet, Christopher Alan Konishi

Open Access Dissertations

Space agencies worldwide are being confronted with the challenges of more distant manned space missions, which will demand greater energy efficiency and reduced weight and volume. One method being considered to reduce the weight and volume is to replace present single-phase Thermal Control Systems (TCSs) with ones that rely on flow boiling and condensation. This transition will require a thorough understanding of the influence of reduced gravity on flow boiling and condensation, and the development of predictive tools for both. The primary purpose of the present study is to investigate the impact gravitational body force effects have on flow boiling …

A Small-Scale Experiment Using Microwave Interferometry To Investigate Detonation And Shock-To-Detonation Transition In Pressed Tatb, Peter John Renslow

Open Access Theses

A small-scale characterization test utilizing microwave interferometry was developed to dynamically measure detonation and run to detonation distance in explosives. The technique was demonstrated by conducting two experimental series on the well-characterized explosive triaminotrinitrobenzene (TATB). In the first experiment series, the detonation velocity was observed at varying porosity. The velocity during TATB detonation matched well with predictions made using CHEETAH and an empirical relation from the Los Alamos National Laboratory (LANL). The microwave interferometer also captured unsteady propagation of the reaction when a low density charge was near the failure diameter. In the second experiment series, Pop-plots were produced using …

Light Off Temperature Based Approach To Determine Diesel Oxidation Catalyst Effectiveness Level And The Corresponding Outlet No And No2 Characteristics, Prateek Tayal

Open Access Theses

According to the latest EPA emission regulations, the NO_x (Nitrogen oxide compounds) emissions from heavy duty compression ignition engines need to see a dramatic reduction. The current technology used for this purpose is the selective catalytic reduction (SCR) system, which achieves NO_x reduction of around 90% [9]. This involves urea injection which is influenced by the NO: NO₂ ratio at the inlet to the SCR. Thus, the role of the DOC (Diesel Oxidation Catalyst) where most of the oxidation of the NO_x compounds takes place, comes to fore. The focus is also on the effectiveness of …

A Novel Microgrid Demand-Side Management System For Manufacturing Facilities, Terance Jerome Harper

Open Access Theses

Thirty-one percent of annual energy consumption in the United States occurs within the industrial sector, where manufacturing processes account for the largest amount of energy consumption and carbon emissions. For this reason, energy efficiency in manufacturing facilities is increasingly important for reducing operating costs and improving profits. Using microgrids to generate local sustainable power should reduce energy consumption from the main utility grid along with energy costs and carbon emissions. Also, microgrids have the potential to serve as reliable energy generators in international locations where the utility grid is often unstable.

For this research, a manufacturing process that had approximately …

Experimental Study Of Unsteady Heat Release In An Unstable Single Element Lean Direct Injection (Ldi) Gas Turbine Combustor, Varun S. Lakshmanan

Open Access Theses

In an effort to curb emissions from gas turbine engines, many low emission engine concepts have been developed. Among the most promising of these is the LDI (Lean Direct Injection). These systems operate at relatively low equivalence ratios close to blowout and are prone to instabilities. Combustion instabilities can reduce the life of the combustor by causing large pressure fluctuations and enhanced heat release to the walls of the combustor and reduce the efficiency of the engines. The understanding of combustion instabilities is vital to the implementation of such systems. Combustion instabilities are studied in an self-excited single element gas …

Weld Pool And Keyhole Dynamic Analysis Based On Visual System And Neural Network During Laser Keyhole Welding, Masiyang Luo

Open Access Theses

In keyhole fiber laser welding processes, the weld pool behavior and keyhole dynamics are essential to determining welding quality. To observe and control the welding process, the accurate extraction of the weld pool boundary as well as the width is required. In addition, because of the cause-and-effect relationship between the welding defects and stability of the keyhole, which is primarily determined by keyhole geometry during the welding process, the stability of keyhole needs to be considered as well.^ The first part of this thesis presents a weld pool edge detection technique based on an off axial green illumination laser and …

Assessment Of Noise Metrics For Application To Rotorcraft, Andrew L. Mcmullen

Open Access Theses

It is anticipated that the use of rotorcraft passenger vehicles for shorter journeys will increase because their use can reduce the time between boarding and take-off. The characteristics of rotorcraft noise are very different to that of fixed wing aircraft. There can be strong tonal components, fluctuations that can also make the noise sound impulsive, and future rotorcraft may produce proportionally more low frequency noise content. Most metrics that are used today to predict noise impact on communities around airports (e.g., L_dn) are just functions of A-weighted sound pressure level. To build a better noise annoyance model that …

Experimental Characterization Of The Pt Asymmetry With Balanced Inflow And Outflow At Different Reynolds Numbers, Zijie Qu

Open Access Theses

This research focused on characterizing the PT asymmetry with balanced inflow and outflow conditions at different Reynolds number using experimental method. The characterization process utilized PIV data to explore the relationship between PT asymmetry and Reynolds number in two different experiments. In the first experiment, balanced inflow and outflow are used to generate the flow field in a cuboid test section with different Reynolds number, the inflow and outflow are located at the central of left side and right side of the test section. In the second experiment, a main flow is introduced to the first experiment by adding another …