Mechanical Engineering Commons^™

The Design And Application Of Induction Motors For Efficient Energy Utilization, Paul K. Lindhorst

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The various means for increasing electric motor efficiency and power factor are presented from the design and application points of view. Various design options are explored using computer aided design procedures. Motor characteristics are reviewed with the intent of maximizing efficiency through proper application. A thorough study of the economics of higher efficiency motors is presented showing payback to the user in terms of energy cost savings and payback of the increased energy required to produce the higher efficiency motors.

Self-Consistency In Estimating Future Electrical Energy Consumption, W. D. Devine Jr., C. C. Calligan, O. D. Osborne

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

A socio economic computer simulation model for the State of Oregon is described. The Oregon State Simulation Model (OSSIM) includes a thirty-seven sector model of electrical energy consumption. Coupling between this model and the OSSIM ensures self-consistent scenarios of socio economic phenomena which underlie energy consumption. One of the purposes of this effort is to help state-level decision makers understand the determinants of electricity consumption within a context of changing economic conditions.

Evaluating The Total Cost Of An On-Site Solar Energy System, Dennis Costello, Jerry Bradley

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

A methodology for evaluating the total or life-cycle cost of an on-site solar energy system is presented. The costs represent after-tax or effective costs realized by the owner of the energy system. The methodology addresses: (1) capital costs; (2) fuel costs; (3) maintenance and operating costs; (4) property taxes; (5) the tax benefits of depreciation; and (6) the investment tax credit. The model was developed for evaluating solar energy systems located at the point where the energy is demanded. However, the methodology also has applicability to many other types of energy systems.

Industrial Innovations And Management Toward More Efficient Usage Of Electrical Energy, Tom Day

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This paper deals with some of the industrial accomplishments in alleviating energy supply and demand problems. A survey is presented on how electrical energy in America is generated, resources used and kilowatt usage for the years 1970 to and including 1974. Conservation of electrical energy is the main theme in which three primary areas of innovation and utilization of industrial equipment are discussed; induction, lighting, heating and air conditioning. An awareness of natural gas shortages and the trend toward an "electric economy" are reviewed. The real challenge to energy management is apparent in order to handle the greatest expansion in …

An Engineering, Geological And Hydrological Environmental Assessment Of A 250 Mmscfd Dry Ash Lurgi Coal Gasification Facility, Mason H. Somerville, James L. Elder, Stephen R. Moran

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

A preliminary engineering, geological, and hydrological environmental assessment of a proposed 250 MMSCFD dry ash Lurgi coal gasification facility is discussed.

The facility's emission spectrum is examined on the basis of the proposed design and empirical data. This system utilizes approximately 13 million tons of lignite and 17,000 acre feet of water per year and consumes 6500 tons of oxygen per day. The results of the study indicate that the major gaseous effluent is CO₂, that the federal limits on SO₂ effluent may be met, and that the atmospheric degradation criterion will be the most difficult one …

2nd Annual Umr-Mec Conference On Energy -- Entire Proceedings, University Of Missouri--Rolla

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

No abstract provided.

Small Wind Power Machine For Rural And Farm Use In The State Of Missouri, R. B. Oetting

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This paper describes work in progress to develop a prototype wind power generator for use by small farms, rural and isolated homes. It is anticipated that the wind power generator may supply power (1 to 10 kw) as base electric power (including energy storage), supplemental power, or in other forms (e.g. water pumping, nitrogen or hydrogen manufacture, and direct mechanical drive). The objective of this study is to produce a system(s) of high efficiency, low construction cost, and minimum maintenance requirement. Preliminary wind tunnel tests have been completed on several blade designs. A tower system is under construction on campus …

Natural Resource Pricing And Economic Development, Vaman Rao

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

In a competitive equilibrium the price of a natural resource will be increasing at a rate equal to the social time preference rate, but in a monopoly market, the price will be increasing at less than social time preference rate. If the producer countries utilise their monopoly of production and sale of a natural resource for the purpose of developing their economies, the price of the natural resource will be growing at the rate at which the producer countries' economies are growing, whether or not the sales proceeds are used to finance their investment programmes, fully or partly.

Optimum Control Of Heating, Ventilating And Air Conditioning Systems, Terry R. Weaver

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The control of HVAC systems has traditionally been performed by relatively simple field hardware. The industry appears, however, to be ready for the use of more sophisticated measures. The paper presents several approaches to the conservation of energy in this area with the use of closed-loop computer control and optimization.

Energy Efficiency And Conservation Of Building Hvac Systems Using The Axcess Energy Analysis Computer Program, Ronald H. Howell, Harry J. Sauer Jr.

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This paper discusses the use of the AXCESS-UMR energy analysis computer program applied to two different buildings. The monthly and yearly energy requirements of many of the commonly used HVAC systems for a single-story multi-zone building are found and compared. Energy conservation techniques are also evaluated for a two-story St. Louis office building.

Creating The Electric Energy Economy, L. G. Hauser

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

My remarks will be directed to four points:

First, that energy is the life blood of our economy, and that its use or conservation is far from a simple matter of personal habits of waste or frugality. In other words, the vital role energy plays in the production of goods and services should be distinguished from its use in their consumption.

Second, that our excessive dependence on our two scarcest energy resources -- oil and natural gas -- is the core of the energy problem, both U.S. and worldwide.

Third, that limiting our time horizon to this winter, next summer, …

Control By Code Of Energy Usage In Building Systems, Harry J. Sauer Jr., Ronald H. Howell

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Space heating, air-conditioning and refrigeration accounts for over 30% of the total energy use in the U.S. ASHRAE Standard 90P, ENERGY CONSERVATION IN NEW BUILDING DESIGN, sets forth requirements for the design of all types of new buildings, covering their exterior envelopes and selection of their HVAC, service water heating, electrical distribution and illuminating systems and equipment for efficient use of energy. This paper reviews the current status, content, and implications of the proposed energy standard and reports some experience with its use.

Centralized Solar Wind Home Heating, Russell Peterson, Duane Cromack

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

In the immediacy of national goals for energy independence, the need emerges to use dialectic methods to diminish the energy consumptive characteristics of the typical home.

At the cutting edge of resourceful progress are the residential developments which embrace alternative and conservative energy techniques. In conjunction with such a planned, low impact community, this paper proposes a cluster-centralized system which utilizes wind energy in combination with solar thermal energy for space and domestic water heating.

A description of the random solar-wind resource embodies a matching problem that in turn reveals the benefits of the combined mode of energy collection. Though …

Energy And Transportation Policy, James S. Sagner

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Energy shortages of recent years suggest a re-examination of national transportation policy. The lack of a coordinated approach to the solution of urban cogestion inhibits potential short-run responses to gasoline shortfalls. Longer-range policy, particularly in the context of severe financial constraints, must be carefully integrated with demonstrated patterns of urban travel and population and employment densities. Given these considerations, metropolitan areas now planning or constructing rapid rail facilities may be selecting inappropriate responses to the problem of urban access.

Energy, Environment And Incremental Decision Making, Jeff V. Conopask, Robert R. Reynolds Jr.

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

During the late 1960's and early 70's a variety of environmental/energy oriented legislation was enacted by the Congress. The most important of these acts, the National Environmental Protection Act (NEPA), required that environmental impact statements be filed when various private and public activities have a potential for impacting man and his environment. (17) Impact statement requirements go beyond the currently practiced cost/benefit analysis, which is often just a production (direct) impact assessment. Heretofore, indirect or second round economic and social effects of consequence affecting other national goals were seldom counted.

The Design And Performance Of A Distributed Flow Water-Cooled Solar Collector, Donald L. Spencer, Theodore F. Smith, Herbert R. Flindt

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Design of a flat plate collector which reduces the temperature differential between the absorber plate and the fluid is described. The reduced temperature differences are shown to yield increase collector performance. Flow characteristics of the collector are examined. Collector thermal performance is illustrated for typical operating and environmental conditions. A cost analysis is presented to demonstrate that material and assembly costs are substantially lower than for any collector presently on the market.

Status Report On The Callaway Nuclear Power Plant, A. E. Bolan, D. F. Schnell

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The progress to date of the first nuclear-powered, electric generating plant proposed to be constructed in the state of Missouri is described.

Direct Ac Generation From Solar Cell Arrays, Fernando L. Alvarado, Adel H. Eltimsahy

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Results of the investigation of the performance of solar cells when directly coupled to a conventional three-phase power network are presented. This approach dissociates the electricity production problem from the electric energy storage problem. Extensive studies of the required power inverter are performed. Preliminary simulation results indicate that ac power outputs of better than 90% of the optimum cell power output can be easily achieved by means of a suitably controlled inverter, thereby justifying the elimination of dc loads or local dc electric energy storage devices. It is also shown that the controlling policy for the inverter must depend on …

Dynamic Simulation For Regional Energy Studies, B. W. Jones, P. M. Moretti, J. H. Mize

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

A series of models has been developed for regional studies of energy supply- demand systems. The models are based on dynamic simulation of components of the system using equations derived from the technical details of the system. The models contain sufficient detail to make in-depth studies and specific recommendations. The final goal is to include all aspects of regional energy systems from native supplies of energy resources to the economic activities of the region.

To develop a comprehensive model, the system has been partitioned into subsystems, so that a detailed model can be made for each subsystem. The detailed model …

How Might Synthetic Fuels From Coal Affect Natural Resources And Environment?, H. J. Plass Jr.

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Energy self-sufficiency for the U. S. requires substantially increased use of coal. Direct combustion of coal without adequate environmental controls, as would occur if coal were used as a fuel for homes and offices throughout the country, would result in severe air pollution problems„ Synthetic fuels from coal such as methane, low BTU gas, or hydrogen, when utilized by the homes and businesses as gas or as electricity from gas, will contribute a much smaller amount of air pollution. However, to make these synthetic fuels available, it is necessary to mine more coal than would have to be mined for …

Alcohol Assisted Hydrocarbon Fuels: A Comparison Of Exhaust Emissions And Fuel Consumption Using Steady-State And Dynamic Engine Test Facilities, D. J. Bushnell, J. M. Simonsen

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This paper presents experimental data which exemplifies the differences in emission level testing on internal combustion engines when dynamic engine tests are used instead of steady-state engine tests. A comparison of the two test methods is made using hydrocarbon fuels with varying amounts of methanol. Emissions measured include the nitric oxides, unburned hydrocarbons and carbon monoxide. Emission levels and fuel consumption are reported for the various volumetric percentages of methanol in the fuel.

Of special significance are the different trends the emission levels establish when subjected to a dynamic engine test as compared to the results for the steady-state tests. …

The Application Of Impact Dampers To Continuous Systems, Ranjit K. Roy, Richard D. Rocke, J. Earl Foster

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A study has been made of the application of impact dampers to two types of continuous systems, a simply supported and a clamped beam. Experimental models were tested in the laboratory and computer programs were developed to calculate response by two separate approaches. Results from calculations agreed favorably with experimental tests. Curves presented show the response to be expected for values of significant system parameters and enable the user to apply impact dampers to these types of continuous systems. © 1975 by ASME.

Transport Phenomena In Thermally Stratified Boundary Layers, D. W. Pepper, S. C. Lee

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Studies of heat, mass, and momentum transfer are made to analyze the formation of marine fogs in thermally stratified boundary layers in the atmosphere. The governing partial differential equations of continuity, momentum, temperature, and concentration are used to describe the transport phenomena. An additional equation of turbulence energy is introduced to account for the development of the turbulent motions. Simultaneous solution of this system of equations allows the turbulent exchange coefficients to be treated in the same way as all other dependent parameters. Verification of the theoretical approach is made by comparing the numerical predictions with wind tunnel simulations of …

Measurement Of Growth Rate To Determine Condensation Coefficients For Water Drops Grown On Natural Cloud Nuclei., A. M. Sinnarwalla, Darryl J. Alofs, J. C. Carstens

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Growth Rate Measurements Were Made for Water Drops Grown on Nuclei in Atmospheric Air Samples Taken in Rolla, Missouri. Rolla, Having a Population of 15,000 and Very Little Industry, is Relatively Free of Urban Pollutants. the Measurements Were Made in a Vertical Flow Thermal Diffusion Chamber at Supersaturations of 0. 5 and 1%. the Time to Grow from Near Dry Radius to the Final Radius (6 to 7. 5 Mu M) Was Measured. If One Assumes the Thermal Accomodation Coefficient is Unity, the Measurements Indicate an Average Value of 0. 026 for the Condensation Coefficient. the Temperature Ranged from 22. …

Thermal Stresses In A Sphere Due To Local Heating Followed By Complete Cooling, T. S. Chen, K. Thirumalai, J. B. Cheung

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Photoionization Of The 6p32,122 Fine-Structure Levels In Cesium, Kaare J. Nygaard, Robert E. Hebner, James A. Jones, Robert J. Corbin

Physics Faculty Research & Creative Works

The relative photoionization cross sections for cesium atoms selectively excited to the 6P32,122 states have been measured in a triple-crossed-beam experiment. A cesium discharge lamp produced resonant wavelengths of 8521 and 8944 for the excitation process. A Hg-Xe lamp combined with a grating monochromator was used for the actual ionization in the wavelength region from 2500 to 5000. Background counts due to photoionization of ground-state cesium atoms and dimers as well as various surface effects were discriminated against by chopping the excitation light source. The data are compared with results from radiative-recombination measurements in which the fine-structure levels are not …

Theoretical And Experimental Investigation Of A Viscous Ring Nutation Damper., Roy Alexander Campbell Iii

Masters Theses

"The dynamics of passive dampers applied to high s peed gyro systems is reviewed briefly and the partially filled viscous ring nutation damper is investigated. Particular attention is given to 1 the broken ring or nutation synchronous configuration where the fluid moves as a rigid slug and the damping is greatest. In this mode the damping is assumed to be viscous and expressions for a linear damping constant are presented. Data from an experimental, high-speed gyro is used to verify the theoretical analysis"-- Abstract, p. 1

The Design Of A Hydraulic Jet Coal Cutting Head., Rodney Steven Eck

Masters Theses

"The use of high-pressure water as a tool for cutting coal is discussed. A proposed longwall coal mining machine utilizing oscillating water jets to cut coal is presented. Apparatus for experimentation using high pressure water involving single and dual oscillating jets was designed, constructed, and tested. The design of the cutting head for the proposed mining machine is considered"-- Abstract, p. ii

Insoluble Condensation Nuclei: The Effect Of Contact Angle, Surface Roughness And Adsorption., P. C. Mahata, Darryl J. Alofs

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Condensation of Water Vapor on Various Surfaces Was Studied Experimentally. for Surfaces with an Air-Water Contact Angle Theta Less Than 20 Degree, the Experimentally Determined Values of Critical Supersaturation S//c Agreed with Those Given by the Volmer Theory. at Higher Theta, the Experimental Values of S//c Were Below the Volmer Theory Values. When the Applied Supersaturation Was Less Than S//c, Condensation Was Avoided for Periods as Long as 20 H. It Was Determined Both by Experiment and Theoretical Analysis that the Effect of Surface Roughness is to Decrease S//c Only Slightly. These Results Suggest that Most Insoluble Airborne Particles Are …

Bit Penetration Into Rock - A Finite Element Study, Jaw-Kuang Wang

Doctoral Dissertations

"A finite element approach has been developed to simulate bit penetration from bit-rock interaction to chip formation. A mathematical rock failure model, based on a review of the existing literature on rock tests, has been proposed to represent post-failure rock behavior and applied in the penetration simulations. The finite element program has been developed for two dimensional plane strain problems with non-linear material properties, geometrical nonlinearities and fracture. An anisotropic element as well as variable stiffness and stress release methods have been used. An iteration method, using an incremental approach, has been applied for continuous penetration and modifications of material …