Open Access. Powered by Scholars. Published by Universities.®

Mechanical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Missouri University of Science and Technology

Discipline
Keyword
Publication Year
Publication
Publication Type

Articles 181 - 210 of 2222

Full-Text Articles in Mechanical Engineering

Directed Energy Deposition Processing-Performance Relationship Of Af9628, Mianqing Yang Jan 2024

Directed Energy Deposition Processing-Performance Relationship Of Af9628, Mianqing Yang

Masters Theses

"AF9628 low alloy steel is a novel steel known for its low cost, high hardness, and outstanding tensile performance. However, the processing methods of AF9628 have been less studied in the additive manufacturing field. As the balance of hardness and tensile results is closely related to the cooling process during manufacturing process window and its relationship to resultant tensile properties is explored. By using the DED method, specimens of this steel are successfully fabricated, and tensile test results are obtained. The AF9628 steel can be manufactured for tailored properties with the DED process by controlling the cooling method. This work …

Go to article

High-Pressure Infiltration Process For Additively Manufactured Ceramic Matrix Composites, Samuel Weiler Jan 2024

High-Pressure Infiltration Process For Additively Manufactured Ceramic Matrix Composites, Samuel Weiler

Masters Theses

"Ceramic matrix composites were developed in order to increase the fracture toughness, thermal shock resistance, and elongation of ceramic materials, while maintaining the very high temperature capabilities of these materials. A renewed focus has been placed on ceramic matrix composites due to the need for materials that maintain good mechanical strength at very high temperatures, for use in the extreme environments encountered by hypersonic vehicles, jet turbine blades, and the like. However, conventional methods to manufacture CMCs are costly and time consuming. The aim of this work is to develop a method for creating additively manufactured ceramic matrix composites using …

Go to article

Human Arm Stiffness Estimation Method Developed For Overground Physical Interaction Experiments: Experimental Validation And Perspectives For Future Applications, Tarani Kanth Kamma Jan 2024

Human Arm Stiffness Estimation Method Developed For Overground Physical Interaction Experiments: Experimental Validation And Perspectives For Future Applications, Tarani Kanth Kamma

Masters Theses

"To build a physically interactive robot for overground applications, it is crucial to first understand the biomechanics of humans underlying overground physical human-robot interaction (pHRI) tasks. Estimating human arm stiffness during overground interactive tasks is a promising first step toward this goal. For this, an arm stiffness estimation technique was developed in our previous works that consider the unique challenges involving overground pHRI, such as the need to estimate the arm stiffness from a short duration of data with fewer repetitions. In this work, our stiffness estimation method is further validated with a passive spring setup with known stiffness values, …

Go to article

A Review Of Dielectric Barrier Discharge Cold Atmospheric Plasma For Surface Sterilization And Decontamination, Kolawole Adesina, Ta Chun Lin, Yue-Wern Huang, Marek Locmelis, Daoru Frank Han Jan 2024

A Review Of Dielectric Barrier Discharge Cold Atmospheric Plasma For Surface Sterilization And Decontamination, Kolawole Adesina, Ta Chun Lin, Yue-Wern Huang, Marek Locmelis, Daoru Frank Han

Biological Sciences Faculty Research & Creative Works

Numerous investigations have shown that non-equilibrium discharges at atmospheric pressure, also known as "cold atmospheric plasma" (CAP) are efficient to remove biological contaminants from surfaces of a variety of materials. Recently, CAP has quickly advanced as a technique for microbial cleaning, wound healing, and cancer therapy due to the chemical and biologically active radicals it produces, known collectively as reactive oxygen and nitrogen species (RONS). This article reviews studies pertaining to one of the atmospheric plasma sources known as Dielectric Barrier Discharge (DBD) which has been widely used to treat materials with microbes for sterilization, disinfection, and decontamination purposes. To …

Go to article

A Concept Of Producing Aluminum In-Situ On The Moon Through Molten Salt Electrolysis, Jacob N. Ortega, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daniel Stutts, Daoru Han Jan 2024

A Concept Of Producing Aluminum In-Situ On The Moon Through Molten Salt Electrolysis, Jacob N. Ortega, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daniel Stutts, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

This paper presents a concept of producing aluminum in-situ on the lunar surface, namely, the Lunar In-Situ Aluminum Production through Molten Salt Electrolysis (LISAP-MSE) method developed at Missouri University of Science and Technology. This paper aims to demonstrate the use of electro-deoxidation to reduce aluminum oxide (i.e., alumina) into aluminum and oxygen gas via electrolysis in a molten salt bath for the production of aluminum on the Moon. It is shown that with a steady supply of hydrogen chloride, this in-situ resource utilization (ISRU) method could supply several necessary materials consumed in the electro-deoxidation process except hydrogen chloride to produce …

Go to article

Magnetic Separation Of Lunar Regolith Simulants With Applications To In Situ Resource Utilization On The Moon, Peter Bachle, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han Jan 2024

Magnetic Separation Of Lunar Regolith Simulants With Applications To In Situ Resource Utilization On The Moon, Peter Bachle, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Chemical and Biochemical Engineering Faculty Research & Creative Works

The development of in situ resource utilization (ISRU) for metal extraction is imperative as a steppingstone for habitation construction in lunar and non-terrestrial environments. Separation of minerals by chemical composition is important to optimize metal and oxygen liberation from lunar ore. To this effect, devices capable of separating aluminum bearing minerals from iron-bearing minerals from the lunar regolith simulants have been developed. Twenty-eight different simulants have been used in this study. A dual-belt separator was designed to reduce middling. Para-magnetic minerals were reliably separated using a neodymium N52-magnet-separator system. Effective separation of aluminum-bearing minerals from iron-bearing minerals was greater than …

Go to article

Phenolic Polymer Infiltration And Pyrolysis Process For Additively Manufactured Carbon/Peek Composites To Produce Carbon–Carbon Composites, S. Weiler, H. A. Haffner, K. Chandrashekhara, J. Watts, G. E. Hilmas, J. Bayldon, L. M. Rueschhoff Jan 2024

Phenolic Polymer Infiltration And Pyrolysis Process For Additively Manufactured Carbon/Peek Composites To Produce Carbon–Carbon Composites, S. Weiler, H. A. Haffner, K. Chandrashekhara, J. Watts, G. E. Hilmas, J. Bayldon, L. M. Rueschhoff

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Carbon–carbon composites are carbon fibers reinforced with carbon matrix and are classified as advanced materials well suited for high-temperature structural applications. Carbon–carbon composites are characterized by maintaining excellent mechanical properties and structural stability at high temperatures and have been used in aerospace application as nozzles, heatshields, and leading edge. However, conventional methods to manufacture carbon–carbon composites are costly and time-consuming. the aim of this work is to develop a method for creating additively manufactured (AM) carbon–carbon composites using a high-pressure re-infiltration process. in doing so, less infiltration cycles are required compared to a low-pressure re-infiltration, reducing the total manufacture time. …

Go to article

Modeling Human Strategy For Flattening Wrinkled Cloth Using Neural Networks, Nilay Kant, Ashrut Aryal, Rajiv Ranganathan, Ranjan Mukherjee, Charles Owen Jan 2024

Modeling Human Strategy For Flattening Wrinkled Cloth Using Neural Networks, Nilay Kant, Ashrut Aryal, Rajiv Ranganathan, Ranjan Mukherjee, Charles Owen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper explores a novel approach to model strategies for flattening wrinkled cloth learning from humans. A human participant study was conducted where the participants were presented with various wrinkle types and tasked with flattening the cloth using the fewest actions possible. A camera and Aruco marker were used to capture images of the cloth and finger movements, respectively. The human strategies for flattening the cloth were modeled using a supervised regression neural network, where the cloth images served as input and the human actions as output. Before training the neural network, a series of image processing techniques were applied, …

Go to article

New Testing Capabilities Of The Missouri University Of Science And Technology Supersonic Wind Tunnel, Joshua Gary, Davide Viganò Jan 2024

New Testing Capabilities Of The Missouri University Of Science And Technology Supersonic Wind Tunnel, Joshua Gary, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The development of non-intrusive, laser-based diagnostic techniques has significantly enhanced supersonic experimental aerodynamics, enabling the measurement of many parameters in complex flow fields. Among these techniques, Tomographic Particle Image Velocimetry, capable of measuring 3 components of velocity in 3-dimensional volumes, is now available at the Aerodynamics Research Laboratory of the Missouri University of Science and Technology. To integrate this new system into the university's supersonic wind tunnel, a redesigned nozzle, test section, and diffuser have been implemented. The upgraded modular test section features 4 large ports which can be configured with windows for optical diagnostics or lead plates for model …

Go to article

Sensor Tasking For Low Earth Orbit Objects: Leveraging Space Sensor Data For Ground-Based Optical Observations, Smriti Nandan Paul, Hang Woon Lee Jan 2024

Sensor Tasking For Low Earth Orbit Objects: Leveraging Space Sensor Data For Ground-Based Optical Observations, Smriti Nandan Paul, Hang Woon Lee

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Because of recent advancements in space technologies, easier and more economical access to space, and an increase in commercial interests, the near-Earth space environment has witnessed an exploding number of objects being put into orbit. In particular, the low Earth orbit (LEO) region is at an increased risk of orbital collisions from large satellite constellation projects. Thus, monitoring LEO objects for space situational awareness and space traffic management has become increasingly imperative. In this paper, we use the concept of limited-CDF (cumulative distribution function) surface and mutual information for designing sensor tasking algorithms focusing on regular observation of known catalog …

Go to article

Sensor Tasking Strategies For Space-Based Observers In The Cislunar Environment, Smriti Nandan Paul, Roshan Thomas Eapen, Puneet Singla Jan 2024

Sensor Tasking Strategies For Space-Based Observers In The Cislunar Environment, Smriti Nandan Paul, Roshan Thomas Eapen, Puneet Singla

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The cislunar space environment has witnessed an increase in activities, and future projections indicate significant growth in object population. Consequently, it becomes crucial to monitor these objects for space domain awareness (SDA) purposes. As the number of objects surpasses the available observers, meticulous sensor tasking becomes essential. This paper focuses on designing and exploring strategies for observing and keeping custody of known objects in cislunar space. Optical space-based telescopes, combined with lunar ground-based telescope, are employed for sensor tasking of cislunar objects residing in valuable orbits. The proposed research aims to address the following key points: (1) examination of the …

Go to article

Damage Initiation Of 15v38 Steel Bar During Square-To-Round Hot Rolling Process, Siva Sai Krishna Dasari, Henry Adekola Haffner, K. Chandrashekhara, Mario F. Buchley, Simon N. Lekakh, Ronald J. O'Malley Jan 2024

Damage Initiation Of 15v38 Steel Bar During Square-To-Round Hot Rolling Process, Siva Sai Krishna Dasari, Henry Adekola Haffner, K. Chandrashekhara, Mario F. Buchley, Simon N. Lekakh, Ronald J. O'Malley

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Hot rolling processes have been extensively used to produce round bars by reducing the cross-sectional area of continuously cast steel. The current trend toward increasing productivity often requires a more aggressive reduction per pass. Establishing safe and optimized hot rolling parameters must be determined to avoid damage while deforming the specific steel composition. Understanding the damage mechanism during the metal forming process is vital for product quality. Herein, a combined experimental and simulation approach is developed to track the evolution potential damage during hot bar rolling. Hot tension tests are conducted on as-cast vanadium micro alloyed 15V38 steel at different …

Go to article

L∞ Bounds For Transient Growth In Repetitive And Iterative Learning Control Systems, Douglas A. Bristow, John R. Singler Jan 2024

L∞ Bounds For Transient Growth In Repetitive And Iterative Learning Control Systems, Douglas A. Bristow, John R. Singler

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper revisits the problem of large transient growth in Iterative Learning Control (ILC) and Repetitive Process Control (RPC) systems. In ILC and RPC problems a process is repeated iteratively, with new control calculations occurring in between each iteration. Large transient growth refers to the propensity of some control algorithms to grow error exponentially before eventually converging. While robust monotonic convergence algorithms (in which monotonic convergence is guaranteed usually in exchange for a small loss in performance) have largely eliminated the concern for large transient growth in ILC, similar results cannot always be obtained in RPC. The emergence of additive …

Go to article

Effect Of Bioactive Borate Glass On Printability And Physical Properties Of Hydrogels, Fateme Fayyazbakhsh, Mehedi H. Tusar, Yue-Wern Huang, Ming C. Leu Jan 2024

Effect Of Bioactive Borate Glass On Printability And Physical Properties Of Hydrogels, Fateme Fayyazbakhsh, Mehedi H. Tusar, Yue-Wern Huang, Ming C. Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Hydrogels are a key component in bioinks and biomaterial inks for bioprinting due to their biocompatibility and printability at room temperature. The research described in the present paper contributes to the advancement of bioprinting by studying the effect of bioactive borate glass (BBG) incorporated into hydrogels on printability and physical properties. In this study, we fabricated 3D-printed hydrogel scaffolds using gelatin and alginate hydrogel mixture incorporated with various amounts of BBG, a bio ceramic rich in therapeutic ions including boron, calcium, copper, and zinc. We investigated the effect of incorporating BBG on the density, viscosity, physical interactions, chemical structure, and …

Go to article

An Evaluation Of Methods For Assessing Robot Kinematic Model Accuracy In The Presence Of Noise, Mitchell R. Woodside, Patrick Bazzoli, Philip A. Olubodun, J. Adam Nisbett, Guixiu Qiao, Douglas A. Bristow Jan 2024

An Evaluation Of Methods For Assessing Robot Kinematic Model Accuracy In The Presence Of Noise, Mitchell R. Woodside, Patrick Bazzoli, Philip A. Olubodun, J. Adam Nisbett, Guixiu Qiao, Douglas A. Bristow

Mechanical and Aerospace Engineering Faculty Research & Creative Works

While there are many works developing methods for modeling and calibrating robot kinematics, assessing the accuracy of those models has received little attention. However, accuracy assessment is critically important for applications where the robot must operate with absolute accuracy over a large region of workspace, such as in robotic machining. When the model of such a system is well calibrated, the remaining deterministic error can be quite complex, owing to complicated gearing errors, deformations, and quasi-static thermal changes. Locating the largest deterministic error requires an exploration over the workspace, but assessing the largest error is complicated by repeatability error and …

Go to article

Impact Of Aging On Pim And Dc Resistance Of Fabric-Over-Foam Metallic Contacts, Kalkidan W. Anjajo, Seunghun Ryu, Shengxuan Xia, Gracie Boyer, Yuchu He, Haicheng Zhou, Hanfeng Wang, Jonghyun Park, Chulsoon Hwang Jan 2024

Impact Of Aging On Pim And Dc Resistance Of Fabric-Over-Foam Metallic Contacts, Kalkidan W. Anjajo, Seunghun Ryu, Shengxuan Xia, Gracie Boyer, Yuchu He, Haicheng Zhou, Hanfeng Wang, Jonghyun Park, Chulsoon Hwang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this paper the impact of aging on the level of passive intermodulation (PIM) and DC resistance of fabric-over-foam metallic contacts is presented. These contacts are widely used to maintain metallic connections between modules and chassis in electronic devices. The PIM caused by the loose metallic contact of these materials mainly affects a receiver's RF sensitivity in mobile devices. This aging test under elevated temperature and relative humidity conditions offers an experiment-based approach with respect to various metallic contact cases. Energy dispersive spectroscopy and scanning electron microscopy are used to characterize the change in material composition and the contact surface …

Go to article

Electrostatic Sorting Of Lunar Regolith Simulants For Sustainable Resource Utilization: Modeling And Characterization Of Particle Size Distribution, Abdullah Al Moinee, Peter Bachle, Kyle Newport, William Schonberg, David Bayless, Jeffrey Smith, Daoru Han, Fateme Rezaei Jan 2024

Electrostatic Sorting Of Lunar Regolith Simulants For Sustainable Resource Utilization: Modeling And Characterization Of Particle Size Distribution, Abdullah Al Moinee, Peter Bachle, Kyle Newport, William Schonberg, David Bayless, Jeffrey Smith, Daoru Han, Fateme Rezaei

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In pursuit of sustainable resource utilization on the Moon, this paper delves into modeling and characterization of particle size distribution (PSD) of lunar regolith simulants in an electrostatic system. A prototype electrostatic sieve was built and tested with four sample simulants mirroring properties of lunar mare and highland regolith. An alternating four-phase (90 degrees, 180 degrees, 270 degrees, 360 degrees) traveling square-wave was utilized for particle-directed transport to model the diverse trajectories of the particles. Numerically, we scrutinized how the distribution functions of the particles are manifested as the electrostatic field propagates, with a focus on three distinct particle ranges …

Go to article

Kinetic Modeling Of Electrostatic Sieving For Lunar Regolith Beneficiation: Case Studies, Easton Ingram, Emmanuela Amen Eze, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han Jan 2024

Kinetic Modeling Of Electrostatic Sieving For Lunar Regolith Beneficiation: Case Studies, Easton Ingram, Emmanuela Amen Eze, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

A new kinetic particle modeling framework was developed to investigate electrostatic transport of lunar regolith particles with applications to the concept of electrostatic sieving. the new approach is based on kinetic particle dynamics and includes major modules of sampling the particle size distribution, solving electric fields, and tracking motion of charged dust grains. Case studies for a concept of electrostatic sieving were chosen to validate the new model. the simulation achieved similar yields reported in previous works, which served as validation of the model. the new model is computationally efficient and could serve as a design, analysis, and optimization tool.

Go to article

Progress Of Lisap-Mse: A Concept Of Producing Aluminum In-Situ On The Moon Through Molten Salt Electrolysis, Jacob N. Ortega, David Bayless, Daniel Stutts, Daoru Han, Todd P. Sander, Jeffrey Smith, Fateme Rezaei, William Schonberg Jan 2024

Progress Of Lisap-Mse: A Concept Of Producing Aluminum In-Situ On The Moon Through Molten Salt Electrolysis, Jacob N. Ortega, David Bayless, Daniel Stutts, Daoru Han, Todd P. Sander, Jeffrey Smith, Fateme Rezaei, William Schonberg

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper presents a concept of producing aluminum in-situ on the lunar surface, namely, the Lunar In-Situ Aluminum Production through Molten Salt Electrolysis (LISAP-MSE) method developed at Missouri University of Science and Technology. This paper aims to demonstrate the use of electro-deoxidation to reduce aluminum oxide (i.e., alumina) into aluminum and oxygen gas via electrolysis in a molten salt bath for the production of aluminum on the Moon. It is shown that with a steady supply of hydrogen chloride, this in-situ resource utilization (ISRU) method could supply several necessary materials consumed in the electro-deoxidation process except hydrogen chloride to produce …

Go to article

Development Of A High-Pressure Infiltration Process For Phenol–Formaldehyde Matrix Composites, Samuel Weiler, Patrick Schwartzkopf, Henry Haffner, K. Chandrashekhara Jan 2024

Development Of A High-Pressure Infiltration Process For Phenol–Formaldehyde Matrix Composites, Samuel Weiler, Patrick Schwartzkopf, Henry Haffner, K. Chandrashekhara

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Phenol–formaldehyde (phenolic) thermosets are known for excellent heat and chemical resistance, high flame retardance, and good mechanical performance. However, phenolics are also known for their high brittleness, and tendency to form voids, due to a condensation reaction forming water during curing. These voids can decrease the mechanical performance of the resultant phenolic composite and introduce undesirable performance characteristics. This work aims to develop a technique that uses high-pressure infiltration to obtain dense phenolic matrix composites, with commercially available resin and fiber reinforcement. The high-pressure system developed in this work is compared to a conventional low-pressure resin infusion technique, and the …

Go to article

Development Of Digital Twin For Fdm Printer With Preventive Cyber-Attack And Control Algorithms, Md Hazrat Ali, Asad Malik, Nursultan Jyeniskhan, Muhammad Arif Mahmood, Essam Shehab, Frank Liou Jan 2024

Development Of Digital Twin For Fdm Printer With Preventive Cyber-Attack And Control Algorithms, Md Hazrat Ali, Asad Malik, Nursultan Jyeniskhan, Muhammad Arif Mahmood, Essam Shehab, Frank Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper presents a developed model of a Digital Twin (DT) for a fused deposition modeling (FDM) printer, real-time defect detection, and proposed frameworks for preventing cyber-attacks in real-time. It also highlights a model predictive control (MPC) algorithm for controlling the material feed based on a real-time feedback system. The system is designed and developed based on DT, and MPC with integrated machine learning (ML) algorithms to establish real-time process control and enhance the safety and reliability of the physical plant. ML algorithm is used for anomaly detection based on the convolutional neural network (CNN) model. The developed system can …

Go to article

Hyper-Thick Electrodes For Lithium-Ion Batteries Enabled By Micro-Electric-Field Process, Tazdik Patwary Plateau, Gracie Boyer, Jonghyun Park Jan 2024

Hyper-Thick Electrodes For Lithium-Ion Batteries Enabled By Micro-Electric-Field Process, Tazdik Patwary Plateau, Gracie Boyer, Jonghyun Park

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Increasing electrode thickness is a key strategy to boost energy density in lithium-ion batteries (LIBs), which is essential for electric vehicles and energy storage applications. However, thick electrodes face significant challenges, including poor ion transport, long diffusion paths, and mechanical instability, all of which degrade battery performance. to overcome these barriers, a novel micro-electric-field (μ-EF) process is introduced that enhances particle alignment during fabrication with reduced distance between anode and cathode. This process produces hyper-thick (≈700 µm) electrodes with low tortuosity and improved ion diffusion. the μ-EF electrodes achieve high areal capacities (≈8 mAh cm−2), while maintaining power density and …

Go to article

Kinetic Simulations Of Dust Grain Charging Near Surfaces Under Various Plasma Conditions, David Lund, Daoru Han Jan 2024

Kinetic Simulations Of Dust Grain Charging Near Surfaces Under Various Plasma Conditions, David Lund, Daoru Han

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper presents fully kinetic numerical investigations of the charging of spherical and irregular shaped dust grains in multiple configurations utilizing the Parallel Immersed-Finite-Element Particle-in-Cell Dusty (PIFE-PIC-D) framework. The simulations account for both surface charging and in-depth charging of the dust grains immersed in various ambient plasma conditions near a floating or biased surface. PIFE-PIC-D explicitly resolves the geometrical and material properties (permittivity and photoelectron emissions) of each individual dust grain. PIFE-PIC-D will model self-consistently the unsteady and stochastic charging of grains directly from the deposition of electrons and ions onto them. PIFE-PIC-D will also simulate the charging of irregular-shaped …

Go to article

Development And Characterization Of An Ion Source To Simulate Low Earth Orbit Plasma Environment In A Vacuum Chamber, Emmanuel Kofi Asuako Wie-Addo, Scott Lucas, Daoru Han Jan 2024

Development And Characterization Of An Ion Source To Simulate Low Earth Orbit Plasma Environment In A Vacuum Chamber, Emmanuel Kofi Asuako Wie-Addo, Scott Lucas, Daoru Han

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A magnetic filter-type plasma source has been installed and characterized in a 10 ft long x 6ft diameter vacuum chamber. The plasma source was characterized with a fleet of diagnostic probes including an in-house cylindrical Langmuir probe. This resulted in the measurement of key plasma parameters such as electron number density, electron temperature, plasma potential, Debye length, ion current density, streaming ion energy, ion number density, and streaming ion velocity. By varying the flow rates, discharge current, and distance, single points measurements were taken at three locations downstream of the plasma source to establish an optimum operating condition to simulate …

Go to article

Investigating Bistable Dynamics Of Coupled Oscillators With Similarities To Neural Activity In Epilepsy, Nilay Kant, Ranjan Mukherjee Jan 2024

Investigating Bistable Dynamics Of Coupled Oscillators With Similarities To Neural Activity In Epilepsy, Nilay Kant, Ranjan Mukherjee

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The dynamics of an oscillator, which exhibits a stable equilibrium and a stable limit cycle, is investigated. We refer to it as a bistable oscillator unit (BOU) and show that two coupled BOUs (CBOUs) exhibit dynamics analogous to neural activity patterns in epilepsy, including healthy, localized, and fully spread epileptic states. By treating each CBOU as an independent system influenced by the state of the other, we establish local input-to-state stability near the equilibrium and the limit cycle and estimate the ultimate bounds of the trajectories. Our analysis identifies the domain of the initial conditions and estimates the coupling parameter …

Go to article

Electrostatic Sorting Of Lunar Regolith Simulants For Sustainable Resource Utilization: Modeling And Characterization Of Particle Size Distribution, Abdullah Al Moinee, Peter Bachle, Kyle Newport, William Schonberg, David Bayless, Jeffrey Smith, Daoru Han, Fateme Rezaei Jan 2024

Electrostatic Sorting Of Lunar Regolith Simulants For Sustainable Resource Utilization: Modeling And Characterization Of Particle Size Distribution, Abdullah Al Moinee, Peter Bachle, Kyle Newport, William Schonberg, David Bayless, Jeffrey Smith, Daoru Han, Fateme Rezaei

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In pursuit of sustainable resource utilization on the Moon, this paper delves into modeling and characterization of particle size distribution (PSD) of lunar regolith simulants in an electrostatic system. a prototype electrostatic sieve was built and tested with four sample simulants mirroring properties of lunar mare and highland regolith. an alternating four-phase (90 degrees, 180 degrees, 270 degrees, 360 degrees) traveling square-wave was utilized for particle-directed transport to model the diverse trajectories of the particles. Numerically, we scrutinized how the distribution functions of the particles are manifested as the electrostatic field propagates, with a focus on three distinct particle ranges …

Go to article

Optimal Tilt-Wing Evtol Takeoff Trajectory Prediction Using Regression Generative Adversarial Networks, Shuan Tai Yeh, Xiaosong Du Jan 2024

Optimal Tilt-Wing Evtol Takeoff Trajectory Prediction Using Regression Generative Adversarial Networks, Shuan Tai Yeh, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric vertical takeoff and landing (eVTOL) aircraft have attracted tremendous attention nowadays due to their flexible maneuverability, precise control, cost efficiency, and low noise. The optimal takeoff trajectory design is a key component of cost-effective and passenger-friendly eVTOL systems. However, conventional design optimization is typically computationally prohibitive due to the adoption of high-fidelity simulation models in an iterative manner. Machine learning (ML) allows rapid decision making; however, new ML surrogate modeling architectures and strategies are still desired to address large-scale problems. Therefore, we showcase a novel regression generative adversarial network (regGAN) surrogate for fast interactive optimal takeoff trajectory predictions of …

Go to article

Bioprinting With Adipose Stem Cells And Hydrogel Modified With Bioactive Glass, Krishna C.R. Kolan, Apurv Saxena, Bradley A. Bromet, Lesa B. Steen, August T. Bindbeutel, Julie A. Semon, Delbert E. Day, Ming C. Leu Jan 2024

Bioprinting With Adipose Stem Cells And Hydrogel Modified With Bioactive Glass, Krishna C.R. Kolan, Apurv Saxena, Bradley A. Bromet, Lesa B. Steen, August T. Bindbeutel, Julie A. Semon, Delbert E. Day, Ming C. Leu

Biological Sciences Faculty Research & Creative Works

Bioprinting research is focused on utilizing growth factors and multiple cell types to create clinically relevant three-dimensional (3D) tissue models using hydrogels. Rheological and biological challenges are two main factors that limit the creation of extrudable bioactive hydrogels. In this study, we investigate incorporation of fast dissolving and bioactive borate glass in different weight to volume percentages (0.075 to 0.6%) to alginate-gelatin (1:1) hydrogel to improve rheological properties and enable bioprinting with bioactive glass. The addition of glass improved the stiffness of the hydrogel. Human adipose-derived mesenchymal stem cells (ASCs) were uniformly mixed in this bioink at 1 x 106 …

Go to article

Oxidation Of Additively Manufactured Zrb2–Sic In Air And In Co2 At 700–1000 °C, Marharyta Lakusta, Nicholas M. Timme, Abid H. Rafi, Jeremy Lee Watts, M. (Ming) C. (Chuan) Leu, Gregory E. Hilmas, William G. Fahrenholtz, David W. Lipke Jan 2024

Oxidation Of Additively Manufactured Zrb2–Sic In Air And In Co2 At 700–1000 °C, Marharyta Lakusta, Nicholas M. Timme, Abid H. Rafi, Jeremy Lee Watts, M. (Ming) C. (Chuan) Leu, Gregory E. Hilmas, William G. Fahrenholtz, David W. Lipke

Materials Science and Engineering Faculty Research & Creative Works

Oxidation behavior of additively manufactured zrb2–sic in air and in co2 is reported in the temperature range of 700–1000 °c. Observed scale morphologies in air and in co2 were similar, featuring an outer borosilicate layer and an inner porous zirconia layer containing partially oxidized silicon carbide particles and remnant borosilicate products. Oxide scale thicknesses and parabolic scaling constants in air were approximately twice those observed in co2 across all studied temperatures. Activation energies for oxidation of 140 ± 20 kj/mol in air and 110 ± 20 kj/mol in co2 were determined, indicating similar diffusion processes that appear to be rate-limiting. …

Go to article

Beneficiation Of Lunar Regolith Simulants Through Electrostatic Sieving And Magnetic Separation, Peter Bachle, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han Jan 2024

Beneficiation Of Lunar Regolith Simulants Through Electrostatic Sieving And Magnetic Separation, Peter Bachle, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

In the light of future development of lunar structures, in-situ feldspar beneficiation is imperative for metal extraction. This research incorporates the tandem use of electrostatic sieving and magnetic separation for collecting a specific size range and mineral composition from lunar soil that optimizes subsequent chemical processing. While earlier works focused on silt-sized particles, this work expands that range up to medium-grained sand with a greater variety of potential lunar regolith compositions. This work shows that a 2.5 kV, 7 Hz to 30Hz frequency, single-phase square wave can lift silt and fine sand for collection. This lifting is successful directly from …

Go to article

First Prev Next Last