Mechanical Engineering Commons^™

A Comparison Of Uniaxial Compressive Response And Inelastic Deformation Mechanisms In Freeze Cast Alumina-Epoxy Composites Without And With Rigid Confinement, Tareq Aljuhari

Mechanical & Aerospace Engineering Theses & Dissertations

Cellular ceramics have an array of improved mechanical properties that make them incredibly desired for different applications such as armor systems, aircraft structures, automobiles bumpers, and biomedical implants. It is also desirable that porous architecture could be shaped into bulk complicated shapes and easy to scale-up with low manufacturing cost. Despite several efficient techniques to fabricate cellular ceramics, some limitations are preventing us from meeting the high demand of the after mentioned applications. For that, freeze casting, also called ice-templating, is technique of solidifying an aqueous ceramic suspension under the effect of unidirectional temperature gradient. In this study, Ice-templated porous …

Smart Manufacturing—Theories, Methods, And Applications, Zhuming Bi, Lida Xu, Puren Ouyang

Information Technology & Decision Sciences Faculty Publications

(First paragraph) Smart manufacturing (SM) distinguishes itself from other system paradigms by introducing ‘smartness’ as a measure to a manufacturing system; however, researchers in different domains have different expectations of system smartness from their own perspectives. In this Special Issue (SI), SM refers to a system paradigm where digital technologies are deployed to enhance system smartness by (1) empowering physical resources in production, (2) utilizing virtual and dynamic assets over the internet to expand system capabilities, (3) supporting data-driven decision making at all domains and levels of businesses, or (4) reconfiguring systems to adapt changes and uncertainties in dynamic environments. …

Development Of A Reverse Engineered, Parameterized, And Structurally Validated Computational Model To Identify Design Parameters That Influence American Football Faceguard Performance, William Ferriell

All Dissertations

Traumatic brain injury (TBI) continues to have the greatest incidence among athletes participating in American football. The headgear design research community has focused on developing accurate computational and experimental analysis techniques to better assess the ability of headgear technology to attenuate impacts and protect athletes from TBI. Despite efforts to innovate the headgear system, minimal progress has been made to innovate the faceguard. Although the faceguard is not the primary component of the headgear system that contributes to impact attenuation, faceguard performance metrics, such as weight, structural stiffness, and visual field occlusions, have been linked to athlete safety. To improve …

Characterization Of A Flex-Fuel Oxy-Combustion System Through Experimental Investigation And Computational Modeling, Md Mohieminul I. Khan

Open Access Theses & Dissertations

Oxy-fuel combustion has the potential to offer high thermal efficiency and lower pollutants emission compared to other existing combustion technologies. More than 63% of the worldâ??s electricity is produced by fossil fuel combustion which also is the major reason for greenhouse gas emissions. Oxy combustion offers a solution to it. Oxy combustion uses pure oxygen as an oxidizer instead of air which eliminates the NOx and SOx products from the exhaust. In oxy-combustion flue gas mainly consists of CO2 and water vapor. Furthermore, combustion in presence of pure oxygen results in higher flame temperature and hence promises higher thermal efficiency. …

Constraint-Aware, Scalable, And Efficient Algorithms For Multi-Chip Power Module Layout Optimization, Imam Al Razi

Graduate Theses and Dissertations

Moving towards an electrified world requires ultra high-density power converters. Electric vehicles, electrified aerospace, data centers, etc. are just a few fields among wide application areas of power electronic systems, where high-density power converters are essential. As a critical part of these power converters, power semiconductor modules and their layout optimization has been identified as a crucial step in achieving the maximum performance and density for wide bandgap technologies (i.e., GaN and SiC). New packaging technologies are also introduced to produce reliable and efficient multichip power module (MCPM) designs to push the current limits. The complexity of the emerging MCPM …

An Algorithm For Task Allocation And Planning For A Heterogeneous Multi-Robot System To Minimize The Last Task Completion Time, Abhishek Patil, Jungyun Bae, Myoungkuk Park

Michigan Tech Publications, Part 1

This paper proposes an algorithm that provides operational strategies for multiple heterogeneous mobile robot systems utilized in many real-world applications, such as deliveries, surveillance, search and rescue, monitoring, and transportation. Specifically, the authors focus on developing an algorithm that solves a min-max multiple depot heterogeneous asymmetric traveling salesperson problem (MDHATSP). The algorithm is designed based on a primal-dual technique to operate given multiple heterogeneous robots located at distinctive depots by finding a tour for each robot such that all the given targets are visited by at least one robot while minimizing the last task completion time. Building on existing work, …

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Fiesta And Shock-Driven Flows, Brian E. Romero

Mechanical Engineering ETDs

In this study, the interaction of a shock with various gas and particle interfaces is analyzed through simulations using a new, GPU capable, multi-species flow solver, FIESTA (Fast, Interface Evolution, Shocks, and Transport in the Atmosphere), de- veloped for this research. The cases studied include the interaction between a shock and i) a two-dimensional (2D), circular cloud of a dense gas; ii) a 2D curtain of a dense gas; iii) a three-dimensional (3D) cylinder of a dense gas, and iv) a 3D curtain of solid particles.

In simulations of a 2D gas curtain and a 3D gas column, the curtain …

Machine Learning Approach For Classifying Power Outage In Secondary Electric Distribution Network, Stephan Mgaya, Hellen Maziku

Tanzania Journal of Engineering and Technology (TJET)

Power outage is the problem that hinders social and economic development especially for developing countries like Tanzania. Frequent power outages damage electric equipment, and negatively affect the industrial production process. Power outages cannot be completely eradicated due to uncontrolled cause like natural calamities but technical challenges can be managed and hence reducing power outages. The existing manual methods used to locate power outage like customer calls is inefficient and time consuming. On the other hand, modern method like the Advanced Metering Infrastructure (AMI) still faces a challenge in effectively classifying power line outage due to the nature of imbalanced datasets. …

Big Data Analytics Framework For Effective Higher Education Institutions, George Matto

Tanzania Journal of Engineering and Technology (TJET)

There has been an increased dependency on Information and Communication Technologies (ICTs) in undertaking various activities in Higher Education Institutions (HEIs) ecosystems. Because of that, huge volumes of data have increasingly been generated. There have been, for instance, considerable amounts of data generated through electronic platforms involved in students’ admission and registration process, students’ academic records management, teaching and learning data, curriculum related data, and several other administrative data. Analysis of data generated from these platforms stands to give students, lecturers, HEIs Management, policy makers and implementers, and other stakeholders useful insights that would help in improving HEIs’ effectiveness. Unfortunately, …

An Iot Based Worker Safety Helmet Using Cloud Computing Technology, Yuthriya Iddi Khamis, Mahmoud Alawi, Waheed Muhammad Sanya

Tanzania Journal of Engineering and Technology (TJET)

Miner safety and security is a major challenge around the world due to the exposure to toxic gases that are frequently released in underground mines. Miners' health is adversely affected primarily by toxic gases, which endanger the workers' lives. Furthermore, human sensory abilities do not detect these dangerous gases. As a result, this paper proposes a safety monitoring system that includes a temperature sensor, humidity sensor, and gas sensors to detect harmful gases and alert miners to those harmful gases using the smart helmet they wear. These gases are transmitted to the control station via the cloud using Internet of …

Control And Planning For Mobile Manipulators Used In Large Scale Manufacturing Processes, Joshua T. Nguyen

LSU Master's Theses

Sanding operations in industry is one of the few manufacturing tasks that has yet to achieve automation. Sanding tasks require skilled operators that have developed a sense of when a work piece is sufficiently sanded. In order to achieve automation in sanding with robotic systems, this developed sense, or intelligence, that human operators have needs to be understood and implemented in order to achieve, at the minimum, the same quality of work. The system will also need to have the equivalent reach of a human operator and not be constrained to a single, small workspace. This thesis developed solutions for …

Carbon Capture, Utilization, And Storage, University Of North Dakota. Energy And Environmental Research Center

EERC Brochures and Fact Sheets

Fact sheet about carbon capture, utilization, and storage (CCUS) and the Energy & Environmental Research Center’s CCUS capabilities. Includes information on the Plains CO₂ Reduction (PCOR) Partnership initiative, Brine Extraction and Storage Test (BEST), Carbon Storage Assurance Facility Enterprise (CarbonSAFE), Red Trail Energy Carbon Capture and Storage, a feed study at Coal Creek Station, Bell Creek and Cedar Creek anticline projects, and Partnership for CO₂ Capture (PCO₂C). [This item is an outdated or superseded version and retained for historical purposes only. It may no longer reflect current information, policies, or practices.]

Error Estimate Of A Decoupled Numerical Scheme For The Cahn-Hilliard-Stokes-Darcy System, Wenbin Chen, Shufen Wang, Yichao Zhang, Daozhi Han, Cheng Wang, Xiaoming Wang

Mathematics and Statistics Faculty Research & Creative Works

We analyze a fully discrete finite element numerical scheme for the Cahn-Hilliard-Stokes-Darcy system that models two-phase flows in coupled free flow and porous media. To avoid a well-known difficulty associated with the coupling between the Cahn-Hilliard equation and the fluid motion, we make use of the operator-splitting in the numerical scheme, so that these two solvers are decoupled, which in turn would greatly improve the computational efficiency. The unique solvability and the energy stability have been proved in Chen et al. (2017, Uniquely solvable and energy stable decoupled numerical schemes for the Cahn-Hilliard-Stokes-Darcy system for two-phase flows in karstic geometry. …

Large Area Projection Sintering Of Semicrystalline Polymers And Part Analysis Of The Printed Specimens, Taranjot Kaur

USF Tampa Graduate Theses and Dissertations

As the requirements posed to products have increased in recent years. The trend towards individualized serial products steps up the need for respective manufacturing techniques to be more and more flexible. Conventional techniques of serial production, such as injection molding, are unable to fully meet the requirements of this trend. Additive manufacturing techniques generate components directly from a CAD data set while requiring no specific mold, producing minimal waste, and reaching satisfactory geometric accuracy. This is how, as opposed to conventional techniques, they comply with these increased demands to processing technology. Over the last two decades, the research community has …

Real-Time Data Analytics For Monitoring Electricity Consumption Using Iot Technology, Waheed Muhammad Sanya, Gaurav Bajpai, Omar Haji Kombo, Evariste Twahirwa

Tanzania Journal of Engineering and Technology (TJET)

Rising electricity bills as a result of climate variability and new home electrical and electronic appliances are becoming a major source of concern for most end users. Consumers are typically unaware of their household electricity consumption patterns and the costs associated with them, making proper planning and budgeting difficult. Monitoring and controlling energy consumption on appliances can reduce energy costs for end-users. The Internet of Things (IoT) has the potential to provide remote monitoring and control of devices via automated monitoring and control. In this study, we propose an IoT-enabled system for monitoring and controlling energy consumption in homes to …

Group-Based Data Offloading Techniques Assisted By D2d Communication In 5g Mobile Network, Juma S Ally

Tanzania Journal of Engineering and Technology (TJET)

Machine type communication devices proposed as one of the substantial data collections in the 5G of wireless networks. However, the existing mobile communication network is not designed to handle massive access from the MTC devices instead of human type communication. In this context, we propose the device-to-device communication assisted a mobile terminal (smartphone) on data computing, focusing on data generated from a correlated source of machine type communication devices. We consider the scenario that the MTC devices after collecting the data will transmit to a smartphone for computing. With the limitation of computing resources at the smartphone, some data are …

Digital Skills And Self-Employment Among Graduates Of Technical Higher Education Institutions In Tanzania, Charles Raphael

Tanzania Journal of Engineering and Technology (TJET)

Digital skills are the driving forces for innovative, inclusive and sustainable growth through innovations and digitalization which in turn stimulate job creation, alleviate poverty, reducing inequality, facilitating the delivery of goods and services. However, large number of graduates is shown to be weak in digital skills in the industry hence affect their employability including self-employment. Recently, the Technical Higher Education Institutions (THEIs) took some initiatives to instill the digital skills to their respective students. This study therefore assessed the level of competence of digital skills among graduates following the initiatives taken by the THEIs and their influence on self-employment. It …

Implementation Of Digital Transformation In The Technical Higher Education Institutions In Tanzania, Charles Raphael

Tanzania Journal of Engineering and Technology (TJET)

Digital transformation has been prioritized recently in this era of fourth industrial revolution by various organizations for maintaining strong competitive advantage, especially in the fourth industrial revolution. The higher education institutions must likewise adopt and implement digital transformation to enrich their students with the knowledge, experience and the skills they need for a very different future. Technical higher education institutions are inevitable in the given transformation. However, very little is known regarding adoption of digital transformation in the given institutions. This study therefore examined the level of adoption of digital services in the technical higher education institutions in Tanzania. It …

Efficient And Simple Heuristic Algorithm For Portfolio Optimization Collether John, Collether John

Tanzania Journal of Engineering and Technology (TJET)

Markowitz model considers what is termed as standard portfolio optimization. The portfolio optimization problem is a problem which based on asset allocation and diversification for maximum return with minimum risk. Thus, the standard portfolio optimization problem happens when the constraints considered are budget and no-short selling. In reality however, portfolio optimization has realistic constraints to be incorporated such as holding sizes, cardinality and transaction cost. When realistic constraints are added into portfolio optimization problem, it becomes too complex to be solved by standard optimization methods which in this case turns to be an extended portfolio optimization problem. Markowitz solution and …

Analyzing The Influence Of Smart-Device Visual Features, Viewing Distance And Content Factors On Video Streaming Qoe, Alex Frank Mongi

Tanzania Journal of Engineering and Technology (TJET)

Quality of experience (QoE) over wireless networks has attracted attention from industry and academia due to an increase in video streaming applications. Several researchers have attempted to understand the factors affecting QoE and design appropriate quality control strategies. Normally, video streaming is initiated by a user who accesses video content over a network using a smart device that may be held at various viewing distances. Each aforementioned factor has the potential to affect QoE. However, several studies explore the behavior of wireless networks on video streaming QoE. To understand the effects of other factors on QoE, this paper investigates the …

Cyber Security Challenges, Its Emerging Trends On Latest Information And Communication Technology And Cyber Crime In Mobile Money Transaction Services, Hakeem J. Pallangyo

Tanzania Journal of Engineering and Technology (TJET)

This paper investigates the challenges emerging trends on latest Information and Communication Technology and cybercrime in mobile money transaction services in Tanzania. The objective of this is to evaluate the challenges associated with this rapid growth in ICT and to determine factors influencing Cybersecurity readiness and Cybercrimes in mobile money transaction services. Cyber Security plays a significant role in the field of Information and Communication Technology especially on mobile money transaction services. The study recognizes the provision of mobile money services by both telecommunication companies and local banks, the fact is that whenever we think about the cyber security, the …

Bbt Side Mold Assy, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set covers the design and fabrication information of the ETSU Guitar Building Project’s BBT (OM-sized) Side Mold Assy for use with the STEM Guitar Project’s standard acoustic guitar kit. The extended 'as built' data set contains an overview file and companion video, the 'parent' CADD drawing, CADD data for laser etching and cutting a drill &/or layout template, CADD drawings in AutoCAD .DWG and .DXF R12 formats of the centerline tool paths for creating the mold assembly pieces on an AXYZ CNC router, and support documentation for CAM applications including router bit specifications, feeds, speed, multi-pass …

Solid Thermal Storage As An Energy Storage Device In Insulated Solar Electric Cookers: Thermal Modeling And Experiment, Michael Antonio Fernandez

Physics

The use of solid thermal storage (STS) as an energy storage device in insulated solar electric cookers (ISEC) was explored using a thermal simulation before retrofitting an existing cooker without energy storage and testing it under several conditions. STS sizing, material selection, and geometry were examined from both theoretical and practical perspectives and re-examined following experimental results. Characterization of the system’s thermal interfaces and methods to improve their thermal conductivities were investigated resulting in several performance enhancements to the system.

Developing A Miniature Smart Boat For Marine Research, Michael Isaac Eirinberg

Computer Engineering

This project examines the development of a smart boat which could serve as a possible marine research apparatus. The smart boat consists of a miniature vessel containing a low-cost microcontroller to live stream a camera feed, GPS telemetry, and compass data through its own WiFi access point. The smart boat also has the potential for autonomous navigation. My project captivated the interest of several members of California Polytechnic State University, San Luis Obispo’s (Cal Poly SLO) Marine Science Department faculty, who proposed a variety of fascinating and valuable smart boat applications.

Investigation Of Topological Phonons In Acoustic Metamaterials, Wenting Cheng

Dissertations

Topological acoustics is a recent and intense area of research. It merges the knowledge of mathematical topology, condensed matter physics, and acoustics. At the same time, it has been pointed out that quasiperiodicity can greatly enhance the periodic table of topological systems. Because quasiperiodic patterns have an intrinsic global degree of freedom, which exists in the topological space called the hull of a pattern, where the shape traced in this topological space is called the phason. The hull augments the physical space, which opens a door to the physics of the integer quantum Hall effect (IQHE) in arbitrary dimensions. In …

Integrating Deep Learning And Hydrodynamic Modeling To Improve The Great Lakes Forecast, Pengfei Xue, Aditya Wagh, Gangfeng Ma, Yilin Wang, Yongchao Yang, Tao Liu, Chenfu Huang

Michigan Tech Publications, Part 1

The Laurentian Great Lakes, one of the world’s largest surface freshwater systems, pose a modeling challenge in seasonal forecast and climate projection. While physics-based hydrodynamic modeling is a fundamental approach, improving the forecast accuracy remains critical. In recent years, machine learning (ML) has quickly emerged in geoscience applications, but its application to the Great Lakes hydrodynamic prediction is still in its early stages. This work is the first one to explore a deep learning approach to predicting spatiotemporal distributions of the lake surface temperature (LST) in the Great Lakes. Our study shows that the Long Short-Term Memory (LSTM) neural network, …

In Situ Observations Of Fish Attraction To Light-Emitting Diodes On An Undersea Observation Deck, Makoto Tomiyasu, Yoko Tanouchi, Yasuzumi Fujimori, Minato Kaji, Takuma Hayashi, Naoto Matsubara, Hiroki Yasuma, Susumu Shimizu, Seiji Katakura

Journal of Marine Science and Technology–Taiwan

Many fisheries employ fishing lights to manipulate the behaviors of target fish and to attract them toward the light; however, relatively few long-time observations of fish attraction have been performed in the field. Here, an underwater observation deck was used to examine the differences in the fish-attracting effect of light-emitting diode (LED) lights on the number of attracted fish and on their behavior in the field, using white-edged rockfish as the target species. A total of 604 ± 324, 307 ± 203 and 171 ± 106 white-edged rockfish individuals were attracted to the observation window when it was illuminated with …

Inter-Annual Variability In Growth And Maturation Of The Swordtip Squid Uroteuthis Edulis In Yilan Bay Off Northeastern Taiwan, Jing-Yu Chen, Tzu-Yun Ching, Chih-Shin Chen

Journal of Marine Science and Technology–Taiwan

The swordtip squid Uroteuthis edulis, distributed in the temperate and tropical neritic waters in the Indo-Pacific region, is a crucial component of marine ecosystems and is a target species of fisheries in the Northwest Pacific. Although studies have elucidated the growth and maturation of the squid in the southern East China Sea (ECS) shelf, few have assessed the population biology of the squid in waters in the vicinity of the southern ECS. We collected samples of swordtip squid from a trawler in Yilan Bay (YLB) between January 2011 and December 2012 to examine the growth and maturation of the squid …

Study On The Improved Radiation Boundary Conditions Based On The Quadratic B-Spline Rankine Panel Method, Ming-Chung Fang, Chun-Hsien Wu

Journal of Marine Science and Technology–Taiwan

This study presents a higher-order Rankine source method that is based on a biquadratic B-spline scheme with an improved radiation boundary condition. This method solves flow problems under all conditions, where , including the undercritical condition ( < 0.25); this condition is present when a ship undergoes slow translational motion. The proposed method is thus more flexible than the many Rankine-source models in the literature that are applicable only to the overcritical condition ( > 0.25). Specifically, the improved radiation boundary condition is derived from upstream Seto radiation boundary conditions and by incorporating the Rayleigh damping distribution over a free surface; the improved condition is explicit and efficient for solving flow problems. In evaluations, the proposed method yields accurate solutions for unsteady flows, which are produced by an oscillating, translationally moving submerged singularity. The method is also compared …