Mechanical Engineering Commons^™

Corrigendum To “Applicability Of Reducing Valve Timing Overlap For Diesel Engines Under High Exhaust Back Pressure”

Journal of Marine Science and Technology–Taiwan

No abstract provided.

Distribution And Population Structure Of Corallivorous Drupella Snails In The Coral Reefs Of Kenting In Taiwan, Chih-Jui Tan, Dun-Ru Kang, Li-Lian Liu

Journal of Marine Science and Technology–Taiwan

The corallivorous Drupella snails are common predators of living hard corals in the Indo-Pacific Ocean, and they can significantly threaten coral reef ecosystems when outbreaks occur. In Taiwan, a Drupella outbreak, which resulted in the dramatic decline of Acropora and Montipora corals, was reported in Penghu in 2002 – 2009. However, the Drupella species involved was not identified, and no further research has been conducted. To obtain current knowledge on the predation pressure of corallivorous snails on hard corals, we investigated benthic communities and the distribution and population structure of Drupella snails in the coral reefs of Kenting, Taiwan. The …

Evaluating The Connectivity Reliability Of The Seaborne Transportation Network Using Uncertainty Theory, Tianshou Liu, Haiyang Bian, Lin Feng, Chenyang Fan, Chaojun Ding, Grifoll Manel, Hongxiang Feng

Journal of Marine Science and Technology–Taiwan

The shipping network serves as the backbone of international trade. However, due to unstable geopolitical conditions, unexpected events have occurred frequently in recent years that have impacted the global shipping supply chain, and this has placed enormous pressure and had adverse effects on seaborne transportation. To measure the reliability of the global shipping network under unexpected events, we abstract the global shipping network into a small world network using uncertainty theory. A method is proposed for selecting (i) the optimal reliable path and (ii) the optimal reliable path with a maximum measurement under different confidence intervals. Our approach is then …

Mechanical Property Analysis And Three-Dimensional Reverse Reconstruction Based On Corrosion Pit Characteristics Of Strong Corrosion Steel Plate, Qiujun Ning, Xiaosong Lu, Jiawei Lu

Journal of Marine Science and Technology–Taiwan

To investigate the strong corrosion effect of 36% industrial hydrochloric acid on Q370 steel for bridges at room temperature. The surface morphology variations of the Q370 steel for bridges with corrosion time were measured and analyzed using a three-dimensional non-contact scanning profilometer. Subsequently, the standard monotonic tensile test was carried out to obtain the load-displacement curve and analyze the mechanical properties of the heavily corroded steel. Moreover, the constitutive model parameters of the heavily corroded steel were optimized. Furthermore, the heavily corroded steel model base on the actual corroded surface morphology was established, employing three-dimensional reverse reconstruction technology and finite …

Sea Ice Identification And Risk Assessment For Navigation In Ice Regions Based On Shipboard Camera Images, Tsung-Hsuan Hsieh, Xuan Lu, Shengzheng Wang, Wei Liu, Jianan Luo

Journal of Marine Science and Technology–Taiwan

In order to guarantee the safe navigation of vessels in icy regions and effectively capture sea ice risk information surrounding ships, this study introduces a sea ice identification and risk assessment process utilizing shipboard camera images. Firstly, based on the distribution characteristics of sea area, a hierarchical region segmentation algorithm is proposed to precisely remove interference factors and extract the region of interest. Then, a multivariate K-means clustering algorithm is proposed to classify sea ice classes based on various characteristics, including spatial similarity, sea ice area, sea ice thickness, gray scale, and other multivariate information. Finally, a method for small …

Optimization On Container Drayage Scheduling In Stochastic Time-Dependent Network, Qi Xu, Jie Huang, Xingyue Chen, Rui Cheng, Xiangyu Yin, Zhongzhen Yang

Journal of Marine Science and Technology–Taiwan

To ensure a reliable operation of container drayage transport system, this paper investigates the drayage scheduling problem in a stochastic time-dependent network. Based on the theory of the robust optimization, a mathematical model considering the attributes of “synchronized operation of multi machines” is built with the aim of minimization of the schedule delay in the whole system. A Simulated Annealing algorithm with Embedded Heuristics (SAEH) is designed for model solution. Comparisons between the results from the robust optimization and traditional expected value approach, and the results from the SAEH and CPLEX are conducted. Based on that, the effectiveness of our …

Offshore Vertical Axis Wind-Photovoltaic Power Plants: Development And Case Study, Victor V. Cheboxarov, Pavel N. Kuznetsov, Shun-Han Yang, Shiu-Wu Chau

Journal of Marine Science and Technology–Taiwan

This paper examines the potential for the development and implementation of hybrid wind-solar power plants utilizing large-scale offshore vertical-axis wind turbines. The proposed solution aims to increase energy production and reliability through the integration of photovoltaic modules directly into the wind turbine structure. Schematics of photovoltaic modules on the upper annular surface of the respective wind turbine are considered. The operation of the hybrid power plant is described. Equations to estimate the power characteristics of the plant are given. The case study analyzes the potential energy production of a hybrid marine power plant with a diameter of 200 m at …

Harvest By Autoflocculation, Biomass, And Carotenoid Production In Sequential Batch Culture Of Haematococcus Pluvialis Under High Ionic Strength And Macroelements Content, J. Galán-González, I. Quintero-Zapata, M Elías-Santos, L.J. Galán-Wong, U.J. López-Chuken, C Guajardo-Barbosa, J.C Beltrán-Rocha

Journal of Marine Science and Technology–Taiwan

Haematococcus pluvialis is a microalga with significant potential due to its capacity to produce carotenoids with antioxidant and nutraceutical benefits. However, the cost of harvesting this microalga, constituting over 30% of total expenses in large-scale production, is a major concern. Efficient flocculation, aiding in cell separation from the culture medium, is crucial to address this issue. The study contrasted Bold’s Basal Medium (BBM) with Lopez-Chuken & Young nutrient solution (LC-Y). The heightened salt content in LC-Y plays a crucial role in fostering saline stress, which is essential for evaluating H. pluvialis flocculation, biomass yield, and carotenoid production. To assess stability …

Research Progress On Ship Trajectory Prediction In Marine Transportation, Xiangen Bai, Kai Ye, Xiaofeng Xu

Journal of Marine Science and Technology–Taiwan

The prediction of ship navigation trajectories is crucial for ensuring maritime navigation safety and forecasting risk. In recent years, extensive research has been conducted on the prediction of ship navigation trajectories at home and abroad, and some results have been achieved. At present, most research on ship navigation trajectory prediction relies heavily on automatic identification system (AIS) data and the historical trajectories of ships. This study first reviews the research background and current situation of ship navigation trajectory prediction. Second, it provides an overview of ship navigation trajectory prediction, with an emphasis on sorting out and elaborating on artificial intelligence …

Numerical Investigations On Particle Collection And Discharge Of Rounded Rectangle Aquaculture Tank In Dual-Diagonal-Inlet Layout, Xiaozhong Ren, Shupeng Du, Hangfei Liu, Xianying Shi, Meng Li, Xian Wang, Suping Liu

Journal of Marine Science and Technology–Taiwan

To improve the space utilization rate of aquaculture tanks in aquaculture facilities and investigate the effect of the length-width ratio parameter (abbr. L/W, with L being the length of the tank and W being its width) on the particle collection and discharge characteristics of the rounded rectangle aquaculture tank with diagonal double inlet pipes. The study simulates the particle discharge procedure of the tank using a solidliquid two-phase numerical model (discrete phase model and RNG k-ε turbulence model adopted). The validity of the numerical model was confirmed through physical experiments. The simulation results for two jet condition indicate that when …

Effects Of Electron Beam Irradiation On Crmnv And Crmntiv High Entropy Alloys: Nano-Mechanical, Structural, And Thermodynamic Perspectives, N. A. Sultana, Y. S. Mohammed, S. J. Pendleton, J. Vennekate, G. Ciovati, X. Li, H. Baumgart, A. A. Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

Beam exit windows are crucial components of any particle accelerator as they provide an interface between the beamline vacuum and target material at atmospheric media. For high beam power machines, special materials and designs are required to withstand high radiation and mechanical loads, while minimizing energy loss during transition and maximizing window lifetime. This research investigates the impact of electron beam exposure to bulk CrMnV and CrMnTiV high entropy alloys (HEAs) with the primary goal of identifying suitable candidate materials for the design of robust and durable exit window settings. The selection criteria include intrinsic characteristics, power dissipation, and mechanical …

Data-Driven Modeling Of Oxygen Kinetics In La0.6sr0.4co0.2fe0.8o3−Δ (Lscf) For High-Temperature Reduction Of Co2 In An Electrolysis Cell, Ferron Campbell

Graduate Theses, Dissertations, and Problem Reports (ETD)

Electrolysis systems are critical to several societal applications, particularly energy storage and conversion. Developing these systems requires a detailed knowledge of the chemistry and thermodynamics of the materials used in the electrolysis cell. This work focuses on using embedded scientific machine learning as an efficient way to build an interpretable model for the reaction and transport kinetics in the LSCF electrode, whose performance directly influences the electrolysis system’s performance. The models developed in this study are trained using the publicly available machine learning package, FoKL-GP. This package incorporates a robust Gibbs sampler that employs a forward variable selection process to …

Railroad Condition Monitoring Using Distributed Acoustic Sensing And Deep Learning Techniques, Md Arifur Rahman

College of Graduate Studies: Theses & Dissertations

Proper condition monitoring has been a major issue among railroad administrations since it might cause catastrophic dilemmas that lead to fatalities or damage to the infrastructure. Although various aspects of train safety have been conducted by scholars, in-motion monitoring detection of defect occurrence, cause, and severity is still a big concern. Hence extensive studies are still required to enhance the accuracy of inspection methods for railroad condition monitoring (CM). Distributed acoustic sensing (DAS) has been recognized as a promising method because of its sensing capabilities over long distances and for massive structures. As DAS produces large datasets, algorithms for precise …

Simulation Of Wave Propagation In Granular Particles Using A Discrete Element Model, Syed Tahmid Hussan

College of Graduate Studies: Theses & Dissertations

The understanding of Bender Element mechanism and utilization of Particle Flow Code (PFC) to simulate the seismic wave behavior is important to test the dynamic behavior of soil particles. Both discrete and finite element methods can be used to simulate wave behavior. However, Discrete Element Method (DEM) is mostly suitable, as the micro scaled soil particle cannot be fully considered as continuous specimen like a piece of rod or aluminum. Recently DEM has been widely used to study mechanical properties of soils at particle level considering the particles as balls. This study represents a comparative analysis of Voigt and Best …

Parametrization Of Fluid Models For Electrical Breakdown Of Nitrogen At Atmospheric Pressure, Shirshak K. Dhali

Electrical & Computer Engineering Faculty Publications

In the transient phase of an atmospheric pressure discharge, the avalanche turns into a streamer discharge with time. Hydrodynamic fluid models are frequently used to describe the formation and propagation of streamers, where charge particle transport is dominated by the creation of space charge. The required electron transport data and rate coefficients for the fluid model are parameterized using the local mean energy approximation (LMEA) and the local field approximation (LFA). In atmospheric pressure applications, the excited species produced in the electrical discharge determine the subsequent conversion chemistry. We performed the fluid model simulation of streamers in nitrogen gas at …

Dynamics Of A 3-D Inlet/Isolator Measured With Fast Pressure-Sensitive Paint, Andrew N. Bustard, Mark E. Noftz, Mitsugu Hasegawa, Hirotaka Sakaue, Joseph S. Jewell, Nicholas J. Bisek, Thomas J. Juliano

Publications

Fast pressure-sensitive paint (PSP) was applied to an inlet/isolator designed using the Osculating Internal Waverider Inlet with Parallel Streamlines (OIWPS) method. The dorsal isolator surface pressure was measured using anodized-aluminum PSP through transparent cast acrylic that makes up the ventral portion of the isolator. Temperature-sensitive paint was utilized to correct for the PSP’s temperature sensitivity. The model was tested under Mach 5.7 flow at Re = 8.5 ×106 /m and 10.2 ×106 /m in the AFOSR–Notre Dame Large Mach-6 Quiet Tunnel (ANDLM6QT) under conventional noise conditions. Flow phenomena, such as shocks originating in the inlet and flow separation at the …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Combined Risk Based Inspection And Fault Tree Analysis For Repetitive 3-Phase Line Piping Leakage At West Java Offshore Topside Facility, Dona Yuliati, Akhmad Herman Yuwono, D. Rizal Asral, Donanta Dhaneswara

Journal of Materials Exploration and Findings

Hydrocarbon releases might result in serious consequences in various aspects. In addition to the contribution to environmental pollution, repetitive leakages need high repair costs. This study aim is to minimize potential repetitive leakage for other typical 3-phase piping systems. We conducted the risk assessment by adopting Risk Based Inspection (RBI) API 581 to identify risk level, calculating piping lifetime, recommended inspection plan and mitigations. The most relevant root causes can be obtained through quantitative Fault Tree Analysis (FTA). Observation and investigation was taken from eight 3-phase piping systems that experienced repetitive leakages. It has been found that the risk level …

Nitrogen Gas Quenching Pressure Effect On Bs S155 Alloy Steel In Vacuum Furnace, Agus Mulyadi Hasanudin, Eddy Sumarno Siradj

Journal of Materials Exploration and Findings

The production of metal and alloy products requires the use of heat treatment, when during the heat treatment process, quenching is a crucial step. The quenching medium can be anything from water, a salt bath, oil, air and gas. In a vacuum furnace, pressurized gas, most frequently nitrogen (N₂) gas, serves as one of the quenching mediums. One of the drawbacks of the quenching process is the distortion and dimensional change of the parts. This paper aims to investigate the influence of nitrogen gas quenching pressure on the distortion and dimensional change of aerospace actuator gear planet parts …

A Preliminary Study On Floating Flexible Otec Cold Water Pipe, Nai Kuang Liang, Hai Kuan Peng

Journal of Marine Science and Technology–Taiwan

Ocean Thermal Energy Conversion (OTEC) requires a large amount of cold seawater. The traditional rigid pipe, semi-rigidly fixed onto the ship bottom is not easy to install and disassemble, so the Floating Flexible Cold Water Pipe (FFCWP) flexibly connected to the ship is proposed. A small FFCWP was designed, fabricated, and successfully installed and recovered in the sea. The flexible pipe adopts commercially available fire ventilation snake pipe. The pipe wall material strength must be improved in the future. Assuming that the drag coefficient Cd value is 1.5, a numerical calculation is employed to simulate the FFCWP attitude from the …

Machine Learning With Multi-Source Data To Predict And Explain Marine Pilot Occupational Accidents, Gokhan Camliyurt, Youngsoo Park, Daewon Kim, Won Sik Kang, Sangwon Park

Journal of Marine Science and Technology–Taiwan

Marine pilot occupational accidents during transfer to/from ships are the primary concern of the International Marine Pilots’ Association (IMPA) and industry professionals. There are multiple transfer methods for marine pilots, with the most common being the pilot boat. To reach the mother ship bridge, the following stages must be safely completed: car transfer, walking on the pier, pier to pilot boat, pilot transfer by boat, cutter to pilot ladder, mother ship freeboard climbing, and ship deck to the bridge. Each stage has its own risk. Previous accident records and expert opinions are commonly used to conduct a risk analysis and …

Evaluation Of Operational Performance Of Wusongkou Cruise Port Through Network Data Envelopment Analysis, Qian-Feng Wang, Guo-Ya Gan, Xin-Liang Ye, Hsuan-Shih Lee

Journal of Marine Science and Technology–Taiwan

As major hubs for cruise berthing and passenger transfers, cruise ports in China were developing rapidly in the years before the COVID-19 pandemic because of an ever-growing regional market. Wusongkou Cruise Port is the most important port for cruise ships in China, and this study evaluated the operational performance of this port during 2011–2020. To this end, two-stage network data envelopment analysis was conducted to evaluate the port’s operation performance; subsequently, the change trajectory of the port’s operational efficiency during 2011–2020 was determined, and the potential reasons for the identified changes are discussed. Finally, suggestions for improving the operational performance …

Controlled Manipulation And Transport By Microswimmers In Stokes Flows, Jake Buzhardt

All Dissertations

Remotely actuated microscale swimming robots have the potential to revolutionize many aspects of biomedicine. However, for the longterm goals of this field of research to be achievable, it is necessary to develop modelling, simulation, and control strategies which effectively and efficiently account for not only the motion of individual swimmers, but also the complex interactions of such swimmers with their environment including other nearby swimmers, boundaries, other cargo and passive particles, and the fluid medium itself. The aim of this thesis is to study these problems in simulation from the perspective of controls and dynamical systems, with a particular focus …

Femtosecond Laser Shock Peening And The Dynamics Of Femtosecond Laser-Induced Shock Waves, Yuxin Li

All Dissertations

Laser shock peening (LSP) is an important material surface strengthening technique that uses laserinduced shock waves to cause severe plastic deformation near material surfaces. It can significantly improve material properties like hardness, strength, fatigue life, and corrosion resistance and is widely used in industrial sectors such as automotive, aerospace, nuclear, and medical areas. The conventional nanosecond laser shock peening (ns-LSP) has demonstrated effectiveness but faces challenges such as complex setup, low throughput, high energy consumption, and inflexibility for complex geometries. Femtosecond laser shock peening (fs-LSP) offers a promising alternative to overcome these issues, thanks to its ultra-high laser intensity and …

Analyzing The Effects Of Ultrafast Laser Processing On Mechanical Properties Of 3d-Printed Pla Parts, Darshan Pramodbhai Yadav

Theses and Dissertations

Recent advances in additive manufacturing technologies have already led to wide-scale adoption of 3D-printed parts in various industries. The expansion in choice of materials that can be processed, particularly using Fused Deposition Modeling (FDM), and the steady advancements in dimensional accuracy control have extended the range of applications far beyond rapid prototyping. However, additive manufacturing still has considerable limitations compared to traditional and subtractive manufacturing processes. This work addresses limitations associated with the as-deposited surface roughness of 3D-printed parts. The effects of roughness-induced stress concentrations were studied on ultimate tensile strength and fatigue life. The samples were manufactured using a …

Interactive Water Vortex Exhibit, Simon Way, Emily Laing, Roqaya Naseri, Makenzie Kan

Mechanical Engineering

The San Luis Obispo Children’s Museum requested an interactive water vortex exhibit to both engage and entertain inquisitive guests, ages two to eight. The goal was to design and manufacture an exhibit that would educate its users on the fluid mechanics behind water vortices. They activate the mechanics by spinning a wheel, which is perceived as the catalyst to manipulate the flow of water to successfully create a whirlpool. Our team has created an interactive display that will enlighten young minds, providing the museum with an educational exhibit which shares a concept not currently taught by any other. Our project …

Damage Detection With An Integrated Smart Composite Using A Magnetostriction-Based Nondestructive Evaluation Method: Integrating Machine Learning For Prediction, Christopher Nelon

All Dissertations

The development of composite materials for structural components necessitates methods for evaluating and characterizing their damage states after encountering loading conditions. Laminates fabricated from carbon fiber reinforced polymers (CFRPs) are lightweight alternatives to metallic plates; thus, their usage has increased in performance industries such as aerospace and automotive. Additive manufacturing (AM) has experienced a similar growth as composite material inclusion because of its advantages over traditional manufacturing methods. Fabrication with composite laminates and additive manufacturing, specifically fused filament fabrication (fused deposition modeling), requires material to be placed layer-by-layer. If adjacent plies/layers lose adhesion during fabrication or operational usage, the strength …

Characterization Of Interlayer Laser Shock Peening During Fused Filament Fabrication Of Polylactic Acid (Pla), Fabien Denise

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The field of additive manufacturing (AM) has gained a significant amount of popularity due to the increasing need for more sustainable manufacturing techniques and the adaptive development of complex product geometries. The problem is that AM parts routinely exhibit flaws or weaknesses that affect functionality or performance. Over the years, surface treatments have been developed to compensate certain flaws or weaknesses in manufactured products. Combining surface treatments with the modularity of additive manufacturing could lead to more adaptable and creative improvements of product functions in the future. The current work evaluates the feasibility of pursuing a new research axis in …

Experimental Analysis Of Nonlinear Wave Propagation In Bistable Mechanical Metamaterials With A Defect, Samuel R. Harre

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Mechanical metamaterials built up of compliant units can support the propagation of linear and nonlinear waves. A popular architecture consists of a one-dimensional chain of bistable elements connected by linear springs. This type of chain can support nonlinear transition waves that switch each element from one stable state to the other as they propagate along the chain. One way to manipulate the propagation of such waves is via introduction of a local inhomogeneity, i.e., a defect in the otherwise periodic chain. Recent analytical and numerical work has shown that based on its initial velocity, a transition wave may be reflected, …

Dynamics And Scaling Of Particle Streaks In High-Reynolds-Number Turbulent Boundary Layers, Tim Berk, Filippo Coletti

Mechanical and Aerospace Engineering Faculty Publications

Inertial particles in wall-bounded turbulence are known to form streaks, but experimental evidence and predictive understanding of this phenomenon is lacking, especially in regimes relevant to atmospheric flows. We carry out wind tunnel measurements to investigate this process, characterizing the transport of microscopic particles suspended in turbulent boundary layers. The friction Reynolds number Re_𝜏 = O(10⁴) allows for significant scale separation and the emergence of large-scale motions, while the range of viscous Stokes number St⁺ = 18–870 is relevant to the transport of dust and fine sand in the atmospheric surface layer. We …