Mechanical Engineering Commons^™

Bulk Storage (10,000+ Tons) Of Fly Ash, Fgd Gypsum, Limestone And Coal At Power Stations In Concrete Domes, Benjamin Davis, Zachary Fillmore, Michael Hunter

World of Coal Ash Proceedings

No abstract provided.

Soil Mixing And Slurry Trench Cutoff Walls For Coal Combustion Residue Sites, Jeffrey C. Evans, Daniel Ruffing

World of Coal Ash Proceedings

No abstract provided.

Cost-Effective, Environmentally-Friendly Ash Beneficiation Technology, Scott Ziegler

World of Coal Ash Proceedings

No abstract provided.

The Utilization Of Dry Scrubber Material For The Production Of Calcium Sulfoaluminate Clinkers And Cements, Tristana Y. Duvallet, Robert B. Jewell, Anne E. Oberlink, Thomas L. Robl

World of Coal Ash Proceedings

No abstract provided.

Net Environmental Benefit Analysis (Neba) For Ccr Pond Closure Decisions -- A Pathway To Meaningful Citizen Engagement And Reducing The Potential For Unnecessary Litigation, Chris Hardin, Ric Traver

World of Coal Ash Proceedings

No abstract provided.

Challenges Met In Using Bottom Ash As A Landfill Drainage Media, William M. Strachan

World of Coal Ash Proceedings

No abstract provided.

Two Bottom Ash Management/Handling System Enhancement Case Studies – From Technology Evaluation And Design Through Construction And Performance Verification, George Mckenzie, Aaron Davis, Chris Pickelmann, Jason Obermeyer

World of Coal Ash Proceedings

No abstract provided.

Slurry-Trench Cutoff Walls For The Containment Of The Coal Combustion Residuals (Ccr) Impacted Groundwater: Evaluation Of Hydraulic Conductivity And Consolidation Properties Of Soil-Bentonite Backfills, Y.L. Yang, Krishna Reddy, Y.J. Du, R.D. Fan

World of Coal Ash Proceedings

No abstract provided.

Ccp Beneficial Use Risk Assessment: Case Studies For Three Different Applications, Andrew Bittner, Ari Lewis

World of Coal Ash Proceedings

No abstract provided.

Corrective Measures/Corrective Action (Cm/Ca) Strategies That Effectively Integrate Engineered Pond Closures And Short/Long-Term Groundwater Management With Case Study Examples, Steve Putrich

World of Coal Ash Proceedings

No abstract provided.

Managing Landfill Leachate In A World Without Ash Basins: Lessons Learned And Practical Considerations, Evan Andrews, Michael Lazar

World of Coal Ash Proceedings

No abstract provided.

Developing Enhanced Monitored Natural Attenuation Strategies Using Reactive Transport Models, Pj Nolan, Hugh Davies, Greg Hebeler, Rens Verburg

World of Coal Ash Proceedings

No abstract provided.

Enhancing Coal Ash Impoundment Closure Using Value Engineering, Holt Wheeler, Trey Mangers, Paul Lear

World of Coal Ash Proceedings

No abstract provided.

Experimental Test Method To Determine The Reactivity Of Fly Ash For Use In Concrete Mixture Proportioning, Antara Choudry, Deborah Glosser, O. Burkan Isgor, W. Jason Weiss

World of Coal Ash Proceedings

No abstract provided.

Overview Of Epri Research On Environmental Issues And Beneficial Use Of Coal Combustion Products, Bruce Hensel, Ken Ladwig

World of Coal Ash Proceedings

No abstract provided.

Is My Site A Candidate For A Groundwater Natural Attenuation Remedy? A Geochemist’S Perspective, Bob Glazier

World of Coal Ash Proceedings

No abstract provided.

Impoundment Closure Enhancement Measures To Support Groundwater Compliance, John Hesemann, Wayne Weber, Eric Dulle

World of Coal Ash Proceedings

No abstract provided.

Panel On Liquefaction Of Ponded Fly Ash: From Laboratory To Practice, Tarunjit S. Butalia

World of Coal Ash Proceedings

No abstract provided.

College Of Engineering Senior Design Competition Spring 2019, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Geospatial Energy Potential And Life Cycle Assessment Of Nearshore Oscillating Water Column Systems, Aleks Siemenn, Marie-Odile Fortier

CURCE Annual Undergraduate Conference

Oscillating Water Column (OWC) systems are an iteration of terminator ocean energy technology which generate electrical energy from turbine torque induced by the compression of air in a chamber from changing water level height. OWCs are a well-established technology, however, there have been no studies to date which quantify the life cycle environmental impacts of these systems in a geographic context. The goal of this study is to optimally size an OWC system for selected New England coastline sites and then assess the environmental impacts of the varying system sizes.

An OWC system is optimally sized when the volume of …

Transferring Power Through A Magnetic Couple, Nickolas Cruz Villalobos Jr.

Senior Theses

Properties of several working magnetic coupled rotors have been measured and their performance compared to theoretical models. Axial magnetic couplers allow rotors to work within harsh environments, without the need for seals, proper alignment, or overload protection on a motor. The influence of geometrical parameters, such as distance from the center of the rotors, polarity arrangement, and the number of dipole pairs were experimentally tested. These results can be used to improve rotor designs, to increase strength and efficiency.

Exploring The Electrical Properties Of Twisted Bilayer Graphene, William Shannon

Senior Theses

Two-dimensional materials exhibit properties unlike anything else seen in conventional substances. Electrons in these materials are confined to move only in the plane. In order to explore the effects of these materials, we have built apparatus and refined procedures with which to create two-dimensional structures. Two-dimensional devices have been made using exfoliated graphene and placed on gold contacts. Their topography has been observed using Atomic Force Microscopy (AFM) confirming samples with monolayer, bilayer, and twisted bilayer structure. Relative work functions of each have been measured using Kelvin Probe Force Microscopy (KPFM) showing that twisted bilayer graphene has a surface potential …

Predicting The Mechanical Properties Of Nanocomposites Reinforced With 1-D, 2-D And 3-D Nanomaterials, Scott Edward Muller

Graduate Theses and Dissertations

Materials with features at the nanoscale can provide unique mechanical properties and increased functionality when included as part of a nanocomposite. This dissertation utilizes computational methods at multiple scales, including molecular dynamics (MD) and density functional theory (DFT), and the coupled atomistic and discrete dislocation multiscale method (CADD), to predict the mechanical properties of nanocomposites possessing nanomaterials that are either 1-D (carbyne chains), 2-D (graphene sheets), or 3-D (Al/amorphous-Si core-shell nanorod).

The MD method is used to model Ni-graphene nanocomposites. The strength of a Ni-graphene nanocomposite is found to improve by increasing the gap between the graphene sheet and a …

Fault Adaptive Workload Allocation For Complex Manufacturing Systems, Charlie B. Destefano

Graduate Theses and Dissertations

This research proposes novel fault adaptive workload allocation (FAWA) strategies for the health management of complex manufacturing systems. The primary goal of these strategies is to minimize maintenance costs and maximize production by strategically controlling when and where failures occur through condition-based workload allocation.

For complex systems that are capable of performing tasks a variety of different ways, such as an industrial robot arm that can move between locations using different joint angle configurations and path trajectories, each option, i.e. mission plan, will result in different degradation rates and life-expectancies. Consequently, this can make it difficult to predict when a …

Motor Control Systems Analysis, Design, And Optimization Strategies For A Lightweight Excavation Robot, Austin Jerold Crawford

Graduate Theses and Dissertations

This thesis entails motor control system analysis, design, and optimization for the University of Arkansas NASA Robotic Mining Competition robot. The open-loop system is to be modeled and simulated in order to achieve a desired rapid, yet smooth response to a change in input. The initial goal of this work is to find a repeatable, generalized step-by-step process that can be used to tune the gains of a PID controller for multiple different operating points. Then, sensors are to be modeled onto the robot within a feedback loop to develop an error signal and to make the control system self-corrective …

Stability Analysis Of A More General Class Of Systems With Delay-Dependent Coefficients, Chi Jin, Keqin Gu, Islam Boussaada, Silviu-Iulian Niculescu

SIUE Faculty Research, Scholarship, and Creative Activity

This paper presents a systematic method to analyse the stability of systems with single delay in which the coefficient polynomials of the characteristic equation depend on the delay. Such systems often arise in, for example, life science and engineering systems. A method to analyze such systems was presented by Beretta and Kuang in a 2002 paper, but with some very restrictive assumptions. This work extends their results to the general case with the exception of some degenerate cases. It is found that a much richer behavior is possible when the restrictive assumptions are removed. The interval of interest for the …

Construction Of A Hyperspectral Camera Using Off-The-Shelf Parts And 3d-Printed Parts, Connor Heo

Mechanical Engineering Undergraduate Honors Theses

The Arkansas Center for Space and Planetary Sciences (ACSPS) is working together with the Mechanical Engineering Department to build a modifiable camera with 3D-printed parts and off-the-shelf parts (sourced from Edmund Optics and Amazon). The design is to be readily changeable, primarily with the 3D printed parts, as to accommodate new ideas and functionalities in the future. Ultimately, the camera should be relatively cheap while maintaining functionality for proposed use cases. Earlier versions of the design will be tested extensively and rapidly updated in the ACSPS labs with benchtop testing. This will involve subjects with both visible and infrared emissions, …

Methods To Remotely Eliminate Biofilm From Medical Implants Using 2.4 Ghz Microwaves, Brett Glenn

Mechanical Engineering Undergraduate Honors Theses

Infections associated with biofilm growth are usually challenging to eradicate due to their high tolerance toward antibiotics [11, 12]. Biofilms often form on the inert surfaces of medically implanted devices [13]. No matter the sophistication, microbial infections can develop on all medical devices and tissue engineering constructs [12]. Related infections lead to 2 million cases annually in the U.S., costing the healthcare system over $5 billion in additional healthcare expenses [12].

Novel solutions to biofilm’s microbial colonization span the spectrum of engineering and science disciplines. Yet a practical solution still does not exist. The research presented here will explore a …

Lithium Molybdate-Sulfur Battery., Ruchira Ravinath Dharmasena

Electronic Theses and Dissertations

Rechargeable energy storage systems play a vital role in today’s automobile industry with the emergence of electric vehicles (EVs). In order to meet the targets set by the department of energy (DOE), there is an immediate need of new battery chemistries with higher energy density than the current Li- ion technology. Lithium–sulfur (Li–S) batteries have attracted enormous attention in the energy-storage, due to their high specific energy density of 2600 Wh kg^-1 and operational voltage of 2.0 V. Despite the promising electrochemical characteristics, Li-S batteries suffer from serious technical challenges such as dissolution of polysulfides Li₂S_{x …}

A Monolithic Arbitrary Lagrangian-Eulerian Finite Element Method For An Unsteady Stokes/Parabolic Interface Problem, Ian Kesler

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this thesis, a non-conservative arbitrary Lagrangian-Eulerian (ALE) method is developed

and analyzed for a type of linearized Fluid-Structure Interaction (FSI) problem in a

time dependent domain with a moving interface - an unsteady Stokes/parabolic interface

problem with jump coefficients. The corresponding mixed finite element approximation is

analyzed for both semi- and full discretization based upon the so-called non-conservative

ALE scheme. The stability and optimal convergence properties in the energy norm are

obtained for both schemes.