Mechanical Engineering Commons^™

Electroosmotic Flow Of Viscoelastic Fluid In A Nanochannel Connecting Two Reservoirs, Lanju Mei, Shizhi Qian

Mechanical & Aerospace Engineering Faculty Publications

Electroosmotic flow (EOF) of viscoelastic fluid with Linear Phan-Thien–Tanner (LPTT) constitutive model in a nanochannel connecting two reservoirs is numerically studied. For the first time, the influence of viscoelasticity on the EOF and the ionic conductance in the micro-nanofluidic interconnect system, with consideration of the electrical double layers (EDLs), is investigated. Regardless of the bulk salt concentration, significant enhancement of the flow rate is observed for viscoelastic fluid compared to the Newtonian fluid, due to the shear thinning effect. An increase in the ionic conductance of the nanochannel occurs for the viscoelastic fluid. The enhancement of the ionic conductance is …

Design And Modeling Of A New Biomimetic Soft Robotic Jellyfish Using Ipmc-Based Electroactive Polymers, Zakai J. Olsen, Kwang J. Kim

Mechanical Engineering Faculty Research

Smart materials and soft robotics have been seen to be particularly well-suited for developing biomimetic devices and are active fields of research. In this study, the design and modeling of a new biomimetic soft robot is described. Initial work was made in the modeling of a biomimetic robot based on the locomotion and kinematics of jellyfish. Modifications were made to the governing equations for jellyfish locomotion that accounted for geometric differences between biology and the robotic design. In particular, the capability of the model to account for the mass and geometry of the robot design has been added for better …

A Rotating Aperture Mask For Small Telescopes, Edward L. Foley

Master's Theses

Observing the dynamic interaction between stars and their close stellar neighbors is key to establishing the stars’ orbits, masses, and other properties. Our ability to visually discriminate nearby stars is limited by the power of our telescopes, posing a challenge to astronomers at small observatories that contribute to binary star surveys. Masks placed at the telescope aperture promise to augment the resolving power of telescopes of all sizes, but many of these masks must be manually and repetitively reoriented about the optical axis to achieve their full benefits. This paper introduces a design concept for a mask rotation mechanism that …

Modeling Of Buildings With Electrochromic Windows And Thermochromic Roofs, Hua-Ting Kao

USF Tampa Graduate Theses and Dissertations

Air conditioning and heating have increased substantially during the past two decades. According to a survey, buildings consume about 73% of the total electricity in the United States, accounting for 41% of all other energy in the world. At the same time, building skin technologies are constantly improving. Electrochromic and thermochromic are two exciting new technologies that can help reduce the energy consumption of a building. The purpose of this work is to increase our understanding of how much the use of electrochromic (EC) and thermochromic (TC) technologies can reduce the energy consumption of residential and commercial buildings in two …

Deficiencies In The Physics Of Existing Operational Wave And Surge Models, D. T. Resio

Ocean Waves Workshop

No abstract provided.

A New Real-Time Ocean Observing Station On Ship Shoal On Louisiana Shelf, Chunyan Li, Peter Luo, Brian Milan, Wei Huang

Ocean Waves Workshop

One of the major challenges that we are facing in the northern Gulf of Mexico coastal area is the need of a better and reliable offshore met-ocean real time data collection system that supports the mission of Bureau of Ocean Energy Management (BOEM) and other federal and local agencies for coastal management, protection, and restoration, especially along the Louisiana coast. This area has a suite of environmental problems that require the acquisition of real time data for immediate assessment or model-based assessment and predictions that rely on this kind of data. One such system providing this kind of data is …

Update In Us Navy Global Wave Model Forecasting, J. D. Dykes, W. E. Rogers, D. Wang

Ocean Waves Workshop

No abstract provided.

Ocean Waves Workshop 2019 Session 2 Notes, Kaus Raghukumar, Sam Mcwilliams

Ocean Waves Workshop

No abstract provided.

Directional Spectrum Measurements By The Spotter: A New Developed Wave Buoy, Kaus Raghukumar, Grace Chang, Frank Spada, Tim Jannsen

Ocean Waves Workshop

The Spotter is an accurate, low-cost, easily deployable and robust solar powered wave buoy recently developed by Sofar Technologies (formerly Spoondrift). Spotter reduces costs and complexity of surface wave and current measurements, which can be useful for academic, military, and commercial research into surface wave and wave-driven dynamics. We performed a series of validation tests and research experiments with the Spoondrift Spotter. The low-cost and compact Spotter makes it easy to deploy arrays of wave buoys which was previously not feasible (or cost prohibitive) with traditional wave buoys. A well-designed array can provide a direct measurement of the directional wave …

Innovations In Metocean Sensors, Pieter Smit, T. T. Janssen

Ocean Waves Workshop

Real-time observations are critical to understand, predict and estimate the impact of extreme weather events such as extratropical hurricanes and storms. Remote sensing, moored wave buoys and advances in predictive models have greatly advanced understanding and predictive capability of extreme ocean weather. However, due to cost and complexity of traditional moored buoys, in-situ networks are typically sparse and often close to shore and not well suited to drive predictive models over meaningful geophysical scales. Here we will discuss ongoing efforts to extend the capability of the Sofar Spotter to measure marine boundary layer dynamics. With the advancement to more portable …

Pressure Effect On An Ocean-Based Humidification-Dehumidification Desalination Process, Yingchen Yang

Mechanical Engineering Faculty Publications

A new humidification-dehumidification (HDH) desalination process is proposed and analyzed. Being ocean based, the process does not produce any brine. It is largely powered jointly by solar energy, wind energy, and various types of ocean energies in a nearly natural way. A vacuum pump is employed to drive the air circulation throughout the HDH process. It is the only unit that consumes electricity. The HDH process is analyzed under various conditions, including using a low pressure (as low as to 0.2 atm) for humidification and the ambient pressure for dehumidification, running the entire HDH process around a low pressure (as …

A Cfd Study Of Steady Fully Developed Laminar Flow Through A 90-Degree Bend Pipe With A Square Cross-Sectional Area, Subodh Sushant Toraskar

Mechanical & Aerospace Engineering Theses & Dissertations

Fluid flow through a closed curved conduit has always been a topic of extensive research, as it has many practical and industrial applications. The flow is generally characterized by a presence of secondary flow, vortical motions and pressure losses for different flow regimes. These observed irregularities may positively or negatively impact the flow. They are beneficial for cases where mixing of fluids is required, usually observed for multiphase flow regimes or detrimental for cases involving particles in the fluid. There are also instances where a particle-laden fluid transported through the curved pipe was directly related to corrosion- erosion related problems. …

Three-Dimensional Rotation Of Paramagnetic And Ferromagnetic Prolate Spheroids In Simple Shear And Uniform Magnetic Field, Christopher A. Sobecki, Yanzhi Zhang, Cheng Wang

Mathematics and Statistics Faculty Research & Creative Works

We examine a time-dependent, three-dimensional rotation of magnetic ellipsoidal particles in a two-dimensional, simple shear flow and a uniform magnetic field. We consider that the particles have paramagnetic and ferromagnetic properties, and we compare their rotational dynamics due to the strengths and directions of the applied uniform magnetic field. We determine the critical magnetic field strength that can pin the particles' rotations. Above the critical field strength, the particles' stable steady angles were determined. In a weak magnetic regime (below the critical field strength), a paramagnetic particle's polar angle will oscillate toward the magnetic field plane while its azimuthal angle …

Designing An Accessible Wave Energy Conversion Device For Powering Ocean Sensors, Sophie Coppieters ‘T Wallant

Independent Study Project (ISP) Collection

Currently, less than 5% of our oceans are comprehensively monitored and much more ocean data is needed to facilitate understanding of ocean physics, carbon cycling, and ocean ecosystems. Today, most autonomous ocean sensors are powered by primary battery, which have both limited capacity and lifetime. The goal of this research is to design a small, accessible renewable wave energy device to power autonomous free-floating ocean sensors. By designing a cheap, accessible, and simple wave energy converter, this work hopes to make ocean sensor deployment easier and cheaper for researchers, increase the lifetime of autonomous ocean sensors, and reduce the reliance …

Assessing The Implications Of A Tidal Barrage Power Plant In Hvalfjörður, Iceland, Olive M. Colangelo

Independent Study Project (ISP) Collection

As climate change continues to threaten the future state of our world, we are searching for measures to take for mitigation. Among these measures, the most talked about method is the development of renewable energies. Great amounts of attention is paid to solar and wind power, but relatively little effort is given to researching the possibilities of ocean energy, particularly tidal barrage energy. This study assesses the possibility of a tidal barrage plant in Hvalfjörður, Iceland. This hypothetical power plant in Hvalfjörður would have an installed capacity of 840MWh and could produce 613GWh per year. This is less than 0.01% …

Analytical Approach To Investigation Of Free Vibration Of Thin Rectangular Plate Immersed In Fluid, Resting On Winkler And Pasternak Foundations, Obanishola Sadiq, Gbeminiyi Sobamowo, Saheed Salawu

Karbala International Journal of Modern Science

Dynamic behaviour of free vibration of rectangular plate is investigated. This study considered an analytical approach to investigation of free vibration of thin rectangular plate immersed in fluid, resting on Winkler and Pasternak foundations.The governing nonlinear partial differential equation is analyzed using two-dimensional differential transform method. The accuracy of the analytical solutions obtained is verified with existing results in literature and confirmed in excellent agreement. Thereafter, the analytical solutions are used for investigation of effect of elastic foundation, fluid and aspect ratio on vibrating plate.From the result, it is observed that, increase elastic foundation parameters increases natural frequency, increase aspect …

General Nonlinear-Material Elasticity In Classical One-Dimensional Solid Mechanics, Ronald Joseph Giardina Jr

LSU New Orleans Theses and Dissertations

We will create a class of generalized ellipses and explore their ability to define a distance on a space and generate continuous, periodic functions. Connections between these continuous, periodic functions and the generalizations of trigonometric functions known in the literature shall be established along with connections between these generalized ellipses and some spectrahedral projections onto the plane, more specifically the well-known multifocal ellipses. The superellipse, or Lam\'{e} curve, will be a special case of the generalized ellipse. Applications of these generalized ellipses shall be explored with regards to some one-dimensional systems of classical mechanics. We will adopt the Ramberg-Osgood relation …

Microextrusion 3d Printing Of Optical Waveguides And Microheaters, Edidiong Nseowo Udofia

Graduate Theses and Dissertations

The drive for smaller and more compact devices presents several challenges in materials and fabrication strategies. Although photolithography is a well-developed method for creating microdevices, the disparate requirements in fabrication strategies, material choices, equipment and process complexities have limited its applications. Microextrusion printing (μEP) provides a promising alternative for microfabrication. Compared to the traditional techniques, the attractions lie in the wide range of printable material choice, greater design freedom, fewer processing steps, lower cost for customized production, and the plurality of compatible substrates. However, while extrusion-based 3D printing processes have been successfully applied at the macroscale, this seeming simplicity belies …

Development Of A Ground-Based Aerial-Tracking Instrument For Open-Path Spectroscopy To Monitor Atmospheric Constituents, Haden Hodges

Civil Engineering Undergraduate Honors Theses

A ground-based aerial-tracking instrument, known as the Ground Tracker, designed to provide spectral data to quantify greenhouse gases is under development. The Ground Tracker includes an Optical System including a high power rifle scope, video camera, and spectrometer used to locate an active light source from the Emitter, and collect spectral data by utilizing an actuating mirror. The implementation of this instrument could be made low cost by utilizing existing weather balloon infrastructure to allow the Emitter to be placed into the lower stratosphere. The recovery of the emitter will be possible by tracking the GPS coordinates. Weather balloon instrument …

Computational Studies Of Thermal Properties And Desalination Performance Of Low-Dimensional Materials, Yang Hong

Department of Chemistry: Dissertations, Theses, and Student Research

During the last 30 years, microelectronic devices have been continuously designed and developed with smaller size and yet more functionalities. Today, hundreds of millions of transistors and complementary metal-oxide-semiconductor cells can be designed and integrated on a single microchip through 3D packaging and chip stacking technology. A large amount of heat will be generated in a limited space during the operation of microchips. Moreover, there is a high possibility of hot spots due to non-uniform integrated circuit design patterns as some core parts of a microchip work harder than other memory parts. This issue becomes acute as stacked microchips get …

Action Recognition In Manufacturing Assembly Using Multimodal Sensor Fusion, Md. Al-Amin, Wenjin Tao, David Doell, Ravon Lingard, Zhaozheng Yin, Ming-Chuan Leu, Ruwen Qin

Computer Science Faculty Research & Creative Works

Production innovations are occurring faster than ever. Manufacturing workers thus need to frequently learn new methods and skills. In fast changing, largely uncertain production systems, manufacturers with the ability to comprehend workers' behavior and assess their operation performance in near real-time will achieve better performance than peers. Action recognition can serve this purpose. Despite that human action recognition has been an active field of study in machine learning, limited work has been done for recognizing worker actions in performing manufacturing tasks that involve complex, intricate operations. Using data captured by one sensor or a single type of sensor to recognize …

Characterization Of Single- And Multi-Phase Shock-Accelerated Flows, Patrick John Wayne

Mechanical Engineering ETDs

Experiments conducted in the Shock Tube Facility at the University of New Mexico are focused on characterization of shock-accelerated flows. Single-phase (gaseous) initial conditions consist of a heavy gas column of sulfur hexafluoride seeded with approximately 11% acetone gas by mass. Visualization of the image plane for gaseous initial conditions is accomplished via planar laser-induced fluorescence (PLIF) with a high-powered Nd:YAG ultraviolet laser and an Apogee Alta U-42 monochrome CCD camera, with a quantum efficiency > 90%. Multi-phase (gas-solid) initial conditions consist of glass micro-beads deposited on small 1-cm diameter discs of specific surface chemistry, mounted flush with the bottom wall …

Design Of Variable Wall Thickness Geometry And Performance Mapping Of Scroll Expanders For Distributed Power Generation, Arun Kumar Narasimhan

USF Tampa Graduate Theses and Dissertations

Low-temperature heat sources such as industrial waste heat, solar, and geothermal are more suitable for small-scale power generation rather than utility scale. In order to maximize the electricity generated from low-temperature heat sources, an efficient expansion device for small-scale power output is necessary. This research work has focused on evaluating the use of a scroll expander and improving its geometrical design for the power output range of 1-25 kW_e.

The first part of the work focusses on modeling the performance of a scroll expander using two non-dimensionless parameters, namely, specific speed and specific diameter. Performance of a scroll …

Energy Transformation And Conservation Investigation, Mike Jackson, Holly Haney

High School Lesson Plans

Students will use a thermoelectric generator module to analyze the relationship between thermal and electrical energies. Using data collection sensors and analysis software, students will investigate the relationship between the temperature gradient across a thermoelectric generator module and the resulting electrical potential. Students will then use their data and analysis to solve problems relating to waste thermal energy in electrical systems and communicate their work to their peers and teacher.

Maquiladoras In Central America: An Analysis Of Workforce Schedule, Productivity And Fatigue., Jose L. Barahona

Masters Theses & Specialist Projects

Textile factories or Maquiladoras are very abundant and predominant in Central American economies. However, they all do not have the same standardized work schedule or routines. Most of the Maquiladoras only follow schedules and regulations established by the current labor laws without taking into consideration many variables within their organization that could affect their overall performance. As a result, the purpose of the study is to analyze the current working structure of a textile Maquiladora and determine the most suitable schedule that will abide with the current working structure but also increase production levels, employee morale and decrease employee fatigue. …

Distributed State Estimation By Using Active-Passive Sensor Networks, Akhilesh Raj, S. Jagannathan, Tansel Yucelen

Electrical and Computer Engineering Faculty Research & Creative Works

This paper proposes a novel adaptive observer for heterogeneous sensor networks (HSNs) to estimate state vector of an unknown target or process by using the sensed output when the input to the target/process is also not known. In an HSN, nodes are considered either active or passive depending upon their ability to sense the target output. The local information exchange among the nodes is dictated by a connected graph. By using the criterion of collective observability, a novel distributed adaptive estimation is introduced where the nodes are allowed to have different sensor modalities. Stability analysis shows uniform ultimate boundedness of …

Investigation Of Fundamental Principles Of Rigid Body Impact Mechanics, Khalid Alluhydan

Mechanical Engineering Research Theses and Dissertations

In impact mechanics, the collision between two or more bodies is a common, yet a very challenging problem. Producing analytical solutions that can predict the post-collision motion of the colliding bodies require consistent modeling of the dynamics of the colliding bodies. This dissertation presents a new method for solving the two and multibody impact problems that can be used to predict the post-collision motion of the colliding bodies. Also, we solve the rigid body collision problem of planar kinematic chains with multiple contacts with external surfaces.

In the first part of this dissertation, we study planar collisions of Balls and …

Active-Passive Dynamic Consensus Filters For Linear Time-Invariant Multiagent Systems, J. Daniel Peterson, Tansel Yucelen, S. Jagannathan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Active-passive dynamic consensus filters consist of a group of agents, where a subset of these agents is able to observe a quantity of interest (i.e. active agents) and the rest are subject to no observations (i.e. passive agents). Specifically, the objective of these filters is that the states of all agents are required to converge to the weighted average of the set of observations sensed by the active agents. Existing active-passive dynamic consensus filters in the classical sense assume that all agents can be modeled as having single integrator dynamics, which may not always hold in practice. Motivating from this …

Event-Triggered Adaptive Distributed State Estimation By Using Active-Passive Sensor Networks, Akhilesh Raj, S. Jagannathan, Tansel Yucelen

Electrical and Computer Engineering Faculty Research & Creative Works

This paper proposes a novel event-triggered adaptive observer for each node in the heterogeneous sensor networks (HSNs) in order to estimate state vector of an unknown target or process by using the sensed output when the input to the target/ process is unknown. A subset of nodes in the HSN referred to as active nodes, can sense the target periodically, estimate the target state vector by using their adaptive observer and can communicate the estimated state vector of the target with the neighboring nodes including passive nodes only at event triggered instants. The adaptive observer parameters of active nodes are …

Merging Parallel-Plate And Levitation Actuators To Enable Linearity And Tunability In Electrostatic Mems, Mark Pallay, Ronald N. Miles, Shahrzad Towfighian

Mechanical Engineering Faculty Scholarship

In this study, a linear electrostatic MEMS actuator is introduced. The system consists of a MEMS cantilever beam with combined parallel-plate and electrostatic levitation forces. By using these two forcing methods simultaneously, the static response and natural frequency can be made to vary linearly with the voltage. The static response shows a linear increase of 90 nm/V and is maintained for more than 12μm of the tip displacement. The natural frequency shows a linear increase of 16 Hz/V and is maintained throughout a 2.9 kHz shift in the natural frequency. This wide range of linear displacement and frequency tunability is …