Mechanical Engineering Commons^™

Continuum Mechanics Modeling Of High Strain Rate Impact Of Thermoplastic Polymer Particles, Jeeva Muthulingam

Theses and Dissertations

The study of particle impact at high strain rates is crucial in fields ranging from materials science and engineering to space exploration and environmental science. In the particular case of cold spray, a particle undergoes intense plastic deformation upon impact, causing it to adhere to the target substrate. While metallic particles impacting on metallic substrates have been extensively studied, understanding the mechanical characteristics of polymeric particles on polymer and metal substrates requires further research. This study focuses on single particle impact modeling, analyzing impact parameters such as particle size, velocity, and angle of incidence using continuum mechanics finite element modeling …

Investigation Of Process-Structure-Property Relationships In Additively Manufactured Chopped Fiber-Reinforced Polymer Composites, Indu Modala

Theses and Dissertations

Fiber-reinforced polymer (FRP) composites are widely used in various industries because of their high stiffness-to-weight ratio. However, traditional manufacturing processes restrict the application of FRP composites to the production of parts with simple geometries. With the advent of additive manufacturing (AM), it is possible to produce topologically optimized parts with complex geometries using chopped FRPs. Fully leveraging the advantages of AM in the fabrication of chopped FRP parts requires a thorough understanding of the effect of the process parameters on the microstructure, and subsequently on the mechanical properties of the manufactured part. This research focuses on studying the process-structure-property (P-S-P) …

Shape Memory Alloy Capsule Micropump For Drug Delivery Applications, Youssef Mohamed Kotb

Theses and Dissertations

Implantable drug delivery devices have many benefits over traditional drug administration techniques and have attracted a lot of attention in recent years. By delivering the medication directly to the tissue, they enable the use of larger localized concentrations, enhancing the efficacy of the treatment. Passive-release drug delivery systems, one of the various ways to provide medication, are great inventions. However, they cannot dispense the medication on demand since they are nonprogrammable. Therefore, active actuators are more advantageous in delivery applications. Smart material actuators, however, have greatly increased in popularity for manufacturing wearable and implantable micropumps due to their high energy …

Using Dft On Ultrasound Measurements To Determine Patient-Specific Blood Flow Boundary Conditions For Computational Hemodynamics Of Intracranial Aneurysms, Hang Yi, Zifeng Yang, Luke Bramlage, Bryan Ludwig

Mechanical and Materials Engineering Faculty Publications

Boundary conditions (BCs) is one pivotal factor influencing the accuracy of hemodynamic predictions on intracranial aneurysms (IAs) using computational fluid dynamics (CFD) modeling. Unfortunately, a standard procedure to secure accurate BCs for hemodynamic modeling does not exist. To bridge such a knowledge gap, two representative patient-specific IA models (Case-I and Case-II) were reconstructed and their blood flow velocity waveforms in the internal carotid artery (ICA) were measured by ultrasonic techniques and modeled by discrete Fourier transform (DFT). Then, numerical investigations were conducted to explore the appropriate number of samples (N) for DFT modeling to secure the accurate BC by comparing …

Settingsorder Article Reprints Open Accesseditor’S Choicearticle Exploring The Impact Of Spray Process Parameters On Graphite Coatings: Morphology, Thickness, And Tribological Properties, Adedoyin Abe, Josue A. Goss, Min Zou

Mechanical Engineering Faculty Publications and Presentations

This study explores, through a full factorial experimental design, the effects of graphite concentration and spray flow rate on the morphology, thickness, and tribological performance of graphite coatings for potential tribological applications. Coatings were applied to rough substrates using varying concentrations and flow rates, followed by analysis of their morphological characteristics, roughness, thickness, coefficient of friction (COF), and wear behavior. The results revealed distinct differences in the coating morphology based on flow rate, with low-flow-rate coatings exhibiting a porous structure and higher roughness, while high-flow-rate coatings displayed denser structures with lower roughness. A COF as low as 0.09 was achieved, …

Non-Linear Modeling Of Hysteresis In Piezoelectric Actuated Cantilever Beam Using The Bouc-Wen Model, Andrew Donald Maas

Master's Theses

Piezoelectric actuators frequently exhibit a time-dependent behavioral phenomenon known as hysteresis, resulting in a lag in the deformation of the actuator compared to linear models. The presence of hysteresis complicates control systems involving piezoelectric actuators. However, traditional modeling methods for piezoelectric actuated smart structures often treat the piezoelectric patches as linear actuators without considering hysteresis, leading to suboptimal controller performance.

This thesis aims to establish a comprehensive model by integrating the Euler-Bernoulli beam bending model with the hysteresis dynamics induced by two opposing piezoelectric patches attached to a beam. A model expansion method is employed to transform the partial differential …

Interaction Of Particles With Plasma And Shock Produced By Pulsed Spark Discharge, Shomik Mukhopadhyay

Dissertations

Interactions of powders with high-temperature plasma and shockwaves occur in diverse scenarios, such as nuclear blasts, accidental industrial dust explosions, solid propellant combustion in explosive charges and when removing contaminants from surfaces. Electrostatic Discharge (ESD), known for generating shock and plasma, is a promising lab-scale technique for simulating these interactions. Studies with ESD involved placing powders near a spark-producing gap between electrodes and observing mechanical and chemical processes like particle motion and ignition. A limited range of spark conditions and material properties have been tested, which facilitated the development and validation of preliminary computational models describing this system. Significant gaps …

Impact Of Polymer Structure In Polyurethane Topcoats On Anti-Icing Properties, Donghyeon Lee, Junho Park, Min Ji Woo, Juhyeong Lee, Joung-Man Park, Hyung Mi Lim, Tae Kyung Lee, Seong Baek Yang, Sang Yong Nam, Dong-Jun Kwon

Mechanical and Aerospace Engineering Faculty Publications

Icing on the topcoat layer of structures or mobility systems can be a factor leading to functional failures or accidents. Material engineering approach to prevent icing involves creating hydrophobic surfaces. In this study, it was confirmed that the method of controlling the structure of polymers using solvents to adjust surface hydrophobicity and ice prevention effects is effective. Polyurethane (PU) topcoats are primarily used on the exterior of mobility devices; therefore, structure of PU was manipulated using xylene. Through the adjustment of the ratio between PU and xylene, changes in the curing enthalpy and crystal structure were observed, which led to …

A Computational Investigation Of Wood Selection For Acoustic Guitar, Jonah Osterhus

Senior Honors Theses

The acoustic guitar is a stringed instrument, often made of wood, that transduces vibrational energy of steel strings into coupled vibrations of the wood and acoustic pressure waves in the air. Variations in wood selection and instrument geometry have been shown to affect the timbre of the acoustic guitar. Computational methods were utilized to investigate the impact of material properties on acoustic performance. Sitka spruce was deemed the most suitable wood for guitar soundboards due to its acoustic characteristics, strength, and uniform aesthetic. Mahogany was deemed to be the best wood for the back and sides of the guitar body …

Effects Of Ti Addition On The Characteristics Of Al-10zn-6mg-2si/Zro2 Composites Produced By Squeeze Casting, Qesha Diva Prameshvara, Pipin Indah Lestari, Bondan Tiara Sofyan

Journal of Materials Exploration and Findings

Metal matrix composite (MMC) with 7xxx aluminum matrix is potential for ballistic applications due to the combination of strength, toughness, and light weight. Previous study successfully produced aluminum-based composites with SiC particles which were able to stop type III bullet, however cracks remained on back of the plate. Therefore, in this research, SiC was replaced by zirconia (ZrO₂) due to its high fracture toughness. Ti-B grain refiner was added to further improve toughness through grain boundary strengthening mechanism. This research developed 5 vol.% ZrO₂ strengthened Al-10Zn-6Mg-2Si composite with addition of Al-5Ti-1B grain refiner produced through squeeze casting …

Integration Of The Ashby Technique And Pahl-Beitz Quantitative Ranking For Railway Axle Material Selection, Helya Chafshoh Nafisah, Jaka Fajar Fatriansyah, Siti Norasmah Surip

Journal of Materials Exploration and Findings

Railway axle serves as a vital connection between the train's wheels and its body. However, cyclic loading and high speed can induce fatigue in railway axle, which potentially leads to damage human safety. Therefore, it is important to find materials that have good mechanical properties with the lowest weight and cost. In this paper, a comprehensive method using Ashby chart has been performed to select candidate materials of railway axle. The methods begin with analyzing function by determining the problem, objective function, and constraints. After that, the results obtained are ranked using Pahl and Beitz quantitative weighting method. The results …

Study On Human Integrity Management System Maturity Level For Supporting Asset Integrity And Process Safety Implementation, Anggiat M. Sihotang, Dedi Priadi, D. Rizal Asral

Journal of Materials Exploration and Findings

The human factors (HF) are recognized as one of critical process safety barriers involved in normal and abnormal conditions in the oil and gas industry. In order to strengthen the HF roles as barriers we need to ensure that the actions generated are based on a valid risk assessment of the operation to be addressed by a relevant human factor analysis. Organizations within the oil and gas process have made much progress in understanding and implementing HF improvement programs. However, organizations are not always clear about what are their current situations in managing HF, their priorities for HF to be …

Analysis Of The Effect Of Different Surface Preparation Methods On Corrosion Resistance And Adhesion Strength Of Astm A36 Steel Substrate With Surface Tolerant Epoxy Paint As Coating Material, Irwan Wijaya Santoso, Daffa Aqila, Rini Riastuti, Rizal Tresna Ramadhani

Journal of Materials Exploration and Findings

In the industrial world, to extend the service life of materials, protection methods are carried out to slow down the material's corrosion rate. The protection method that is often used is the coating method. The coating method is a protection method by coating the substrate material using a coating material to prevent contact between the substrate material and the environment. In this research, the substrate material used is ASTM A36 steel and the coating material used is Surface Tolerant Epoxy paint. The independent variable used in this study lies in the surface preparation method which consists of: solvent cleaning, hand …

Creating A Collapsible Sling Lift Capable Of Transporting Patients Between Various Locations, Macey Jewell Ross, Cameron Delaney Hillman, Lydia Noel Miller

Honors Theses

As Senior Biomedical Engineering students at the University of Mississippi, we, Lainey Hillman, Lydia Miller, and Macey Ross, are required to complete a final senior capstone for our department. This project aims to provide a solution to a current unmet clinical need in the healthcare industry, thus our team sought to improve the lack of transportability of sling lifts. The current sling lifts on the market display numerous issues: heavy, bulky, use confined to certain areas, and use specific for only one type of transportation. To combat these problems, we designed a sling lift that was lightweight, collapsible, safe, and …

Creating A Collapsible Sling Lift Capable Of Transporting Patients Between Various Locations, Cameron Delaney Hillman, Macey Jewell Ross, Lydia Noel Miller

Honors Theses

As Senior Biomedical Engineering students at the University of Mississippi, we, Lainey Hillman, Lydia Miller, and Macey Ross, are required to complete a final senior capstone for our department. This project aims to provide a solution to a current unmet clinical need in the healthcare industry, thus our team sought to improve the lack of transportability of sling lifts. The current sling lifts on the market display numerous issues: heavy, bulky, use confined to certain areas, and use specific for only one type of transportation. To combat these problems, we designed a sling lift that was lightweight, collapsible, safe, and …

The Analysis Of Mechanical Exfoliation Of Graphene For Various Fabrication And Automation Techniques, Lance Yarbrough

Physics Undergraduate Honors Theses

Mechanical Exfoliation

Environment And Response Of 3d-Encapsulated Mesenchymal Stem Cells To Mechanical Loading, Augustus Greenwood

McKelvey School of Engineering Graduate Student Theses & Dissertations

This thesis explores the micromechanical environment induced when cyclically compressing hydrogels via finite element modeling and experimentally on the impact of loading on mesenchymal stem cells (MSCs) when encapsulated withing 3D hydrogel matrices. Degenerative joint diseases, characterized by cartilage degradation, present significant challenges due to cartilage's limited self-repair capacity. Innovative approaches, including stem cell-based therapies and engineered biomaterials, have emerged as promising strategies for cartilage repair and regeneration. This work specifically investigates the calibration of a bioreactor, the uniformity of load response across the hydrogel constructs via finite element modeling (FEM), and the stress response of MSCs subjected to various …

Development Of A Multi-Use Modular Microfluidic Platform Using 3d Printing, Carson Emeigh

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Microfluidic lab-on-a-chip (LoC) technology has driven numerous innovations due to their ability to perform laboratory-scale experiments on a single chip using microchannels. Although LoC technology has been innovative, it still suffers from limitations related to its fabrication and design flexibility. Typical LoC fabrication, with photolithography, is time consuming, expensive, and inflexible. To overcome the limitations of LoC devices, modular microfluidic platforms have been developed where multiple microfluidic modules, each with a specific function or group of functions, can be combined on a single platform. Modular microfluidics have overcome some of the limitations of LoC devices, but currently, their fabrication is …

Thermal Conductivity Of Thin Porous Ceramic Coatings: An Analytical And Experimental Study, Lei Zhao

Theses and Dissertations

An analytical model of the thermal conductivity of the porous yttrium-stabilized zirconia (YSZ) layer used in the thermal barrier coatings (TBCs) is presented. Such high-temperature resistant coatings are essential to protect the metallic components of gas turbine engines. The model calculates the conductivity based on the coating's porosity, pore size distribution, and pore morphology, including the individual pore cross-section area, aspect ratio, and orientation, which are extracted from the scanning electron microscopy images. The model was verified through comparisons with numerical simulation results from a multiphysics software tool. A laser temperature gradient test was performed to validate the analytical model …

Numerical Simulation Of Laser Induced Elastic Waves In Response To Short And Ultrashort Laser Pulses., Alireza Zarei

All Dissertations

In an era of intensified market competition, the demand for cost-effective, high-quality, high-performance, and reliable products continues to rise. Meeting this demand necessitates the mass production of premium products through the integration of cutting-edge technologies and advanced materials while ensuring their integrity and safety. In this context, Nondestructive Testing (NDT) techniques emerge as indispensable tools for guaranteeing the integrity, reliability, and safety of products across diverse industries.

Various NDT techniques, including ultrasonic testing, computed tomography, thermography, and acoustic emissions, have long served as cornerstones for inspecting materials and structures. Among these, ultrasonic testing stands out as the most prevalent method, …

Drag Reduction In Channel Flow Configurations For Laminar And Turbulent Flow Past Superhydrophobic Surfaces, Henry Louis Ems

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

In this work, we present friction drag reduction in minichannel laminar flow past superhydrophobic metallic surfaces. Femtosecond laser surface processing (FLSP), a one-step scalable method, was used to create permanent microscale and nanoscale structures on 316 stainless steel plates. The resulting superhydrophilic plates were covered by tall (215 μm) or short (27 μm) structures. The FLSP plates were then transitioned to superhydrophobic by evaporative deposition of a fluorinated silane, a low surface energy coating. Using purified water, the friction factor was obtained by measuring pressure drop along a minichannel with a rectangular cross section for flow rates corresponding …

The Analysis Of Mechanical Exfoliation Of Graphene For Various Fabrication And Automation Techniques, Lance Yarbrough

Mechanical Engineering Undergraduate Honors Theses

Mechanical Exfoliation of Graphene is an often-overlooked portion of the fabrication of quantum devices, and to create more devices quickly, optimizing this process to generate better flakes is critical. In addition, it would be valuable to simulate test pulls quickly, to gain insight on flake quality of various materials and exfoliation conditions. Physical pulls of graphene at various temperatures, pull forces, and pull repetitions were analyzed and compared to the results of ANSYS simulations, solved for similar results. Using ANSYS’ ability to predict trends in exfoliations, flake thickness and coverage using stress and deflection analyses were investigated. Generally, both strongly …

Development, 3d Printing, And Sintering Of Aluminum-Magnesium Alloy Pastes For In-Space Manufacturing Applications, Fatou Ndiaye

Electronic Theses and Dissertations

This study explores the additive manufacturing process of paste printing, sintering, and de-binding for fabricating aluminum-magnesium alloy components. The paste formulation involved combining aluminum powder with varying magnesium concentrations, utilizing acrylic polyol, solvent, and plasticizer to create a homogeneous mixture. Printing parameters were optimized to ensure continuous pressure for improved extrusion. Sintering conditions involved incremental temperature increases with nitrogen flow to remove solvents. Density measurements, tensile tests, and shrinkage calculations were conducted to assess part quality post-sintering. The study revealed significant improvements in part quality with 5 wt.% magnesium incorporation within aluminum, although density and tensile strength fell short of …

Improved Ballistic Impact Resistance Of Nanofibrillar Cellulose Films With Discontinuous Fibrous Bouligand Architecture, Colby Caviness

All Theses

Natural protective materials offer unparalleled solutions for impact-resistant material designs that are simultaneously lightweight, strong, and tough. Particularly, the dactyl club of mantis shrimp features chitin nanofibrils organized in a Bouligand structure, which has been shown to effectively dissipate high-impact energy during powerful strikes. The mollusk shells also achieve excellent mechanical strength, toughness, and impact resistance with a staggered, layer-by-layer structure. Previous studies have shown that hybrid designs, by combining different bioinspired microstructures, can lead to enhanced mechanical strength and energy dissipation capabilities. Nevertheless, it remains unknown whether combining Bouligand and staggered structures in nanofibrillar cellulose (NFC) films, forming a …

A Manufacturing-To-Response Pathway For Manufacturing Optimization Of Carbon Fiber Reinforced Polymer Composite Structures, Madhura Limaye

All Dissertations

Over the past decade, there has been an increased adoption of thermoplastic and thermoset based continuous carbon fiber reinforced polymer (CFRP) composites for structural applications in several industries. Among the different manufacturing methods, thermoforming process for thermoplastic based continuous CFRP’s offer a major advantage in reducing cycle times for large scale productions. Similarly, out-of-autoclave curing process for thermoset based continuous CFRP’s using heated tooling enables production of large composite structures. However, these manufacturing processes can have a significant impact on the structural performance of parts by inducing undesirable effects. These effects include inhomogeneous fiber orientations, thickness variations, and residual stresses …

Sliding Markov Decision Processes For Dynamic Task Planning On Uncrewed Aerial Vehicles, Trent Wiens

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Mission and flight planning problems for uncrewed aircraft systems (UASs) are typically large and complex in space and computational requirements. With enough time and computing resources, some of these problems may be solvable offline and then executed during flight. In dynamic or uncertain environments, however, the mission may require online adaptation and replanning. In this work, we will discuss methods of creating MDPs for online applications, and a method of using a sliding resolution and receding horizon approach to build and solve Markov Decision Processes (MDPs) in practical planing applications for UASs. In this strategy, called a Sliding Markov Decision …

Dynamic Impact Testing And Numerical Analysis Of Non-Proprietary Astm F2656-20 M50 Anti-Ram Barrier Components, Weston Kelley

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

In a post-9/11 world, hostile actors are using vehicles as weapons to inflict civilian casualties. Pedestrians, vulnerable road users, military personnel, and police may be targeted using a vehicle as a weapon. The United States Department of Defense (DoD) also utilizes Entry Control Facilities (ECFs) which are carefully designed transportation corridors to manage how threat vehicles are able to access military facilities. In 2004, DoD started to upgrade all ECFs using both passive and active barriers. Many anti-ram vehicle barriers were evaluated according to the criteria established in ASTM F2656, but to date few options are available which are (1) …

The Effect Of Extended Saltwater Absorption And Uv Cure On The Compressive Properties Of Msla 3d-Printed Photopolymer Resin Samples With Printing Variations, Suzanne Dixon

Theses and Dissertations

Liquid Crystal Display (LCD) 3D printers, also known as Masked Stereolithography Apparatus (MSLA), is a type of vat polymerization printing technique that cures liquid resin into a solid object. This technique is relatively new. Consequently, there is a shortage of detailed research on the impact of long-term environmental exposure on the MSLA-printed materials. The research within this document informs engineers and scientists of resin compressive properties after extended exposure to saltwater and ultraviolet (UV) light. Saltwater absorption of the material was analyzed at atmospheric pressure, 30-psi, 60-psi, and 90-psi; the samples reached saturation in saltwater after 56 days. The variation …

Mechanical Characterization And Evaluation Of Additively Manufactured Titanium 5v-5mo-5al-3cr Alloy, Zachary Casias

Mechanical Engineering ETDs

Ti-5V-5Mo-5Al-3Cr (Ti-5553) is a near beta titanium alloy commonly used in aerospace applications. It is currently being explored for additive manufacturing (AM), but the fatigue behavior of this AM alloy needs to be well-understood for adoption in aerospace applications. The present work examines the tensile and fatigue behavior of LPBF manufactured Ti-5553. The effect of post-print heat treatments, effects of surface roughness, and print defects on the mechanical properties of AM Ti-5553 were also evaluated. Fatigue lives of as-LPBF and BAA material are nearly identical, and both are far below the fatigue lives of conventionally manufactured Ti-5553 of 350 MPa. …

Research On 3d Printing Resin Exposure Properties And Its Application On Centrifugal Microfluidic Platform Based On Fluorescence Detection, Zheng Qiao

LSU Doctoral Dissertations

This dissertation encapsulates significant advancements in the field of SLA 3D printing and centrifugal microfluidics. Central to the research is the development of a novel mathematical model for predicting trapped resin thickness in SLA 3D printing, a groundbreaking contribution that addresses a critical aspect of printing intricate structures. This model, the first to establish a mathematical relationship for resin thickness, is rooted in a comprehensive study of the resin curing process. The research leverages the concept of 'critical dosage' for resin curing, leading to a more refined and theoretically grounded approach for calculating curing thickness. Experimentation further validates the model, …