Mechanical Engineering Commons^™

Development Of A Mechatronics Design Studio, Sema E. Alptekin

Industrial and Manufacturing Engineering

Mechatronics is a combination of mechanics, electronics and information technology intended to raise the intelligence level and flexibility of products and devices. There is a need to develop programs and laboratories in Mechatronics to create an understanding of how new technologies influence the traditional methods of designing products and manufacturing systems. A model "Mechatronics Design Studio" has recently been developed to support the Mechatronics and Manufacturing Automation courses offered at Cal Poly's Industrial and Manufacturing Engineering Department. Laboratory experiments have been developed and several student projects have been completed. In this paper, an overview of the design studio and select …

Parameters' Analysis Of 3d Random Stacking Palletization, Najeeb Syed

Theses

Palletization is a very important element of production, distribution and warehousing activities. The 3D random stacking palletization method is based on volume utilization instead of surface area optimization. Random stacking provides interlocking among the boxes and hence it improves the stability of the pallet load. Volumetric Pallet Utilization is normally the prime concern of any palletization process, with Work in Process and Palletization time being also important. This research uses data generated from a previous heuristic to establish mathematical relationships between the three mentioned performance indices and also three additional indirect variables, namely: Total Number of Sub Volumes, Partitioned Remaining …

Finite Element Analysis Of Skin Injuries By Water Jet Cutting, Syed Muhammad Arif

Theses

High pressure water jets are used in industry for cleaning and cutting purposes. These devices can generate pressure up to 400 MPa. As high pressure water jets become more widespread in industry, injuries will be seen with great frequency. Penetrating injuries by these devices can produce minimal external evidence of extensive soft tissue injury. To know the extent of injury, it is important to study the relationship between operating parameters of water jet and the skin layers. A computational analysis is carried out using finite element method to find the effects of water jet pressure on the skin layer. Finite …

An Integrated Approach To Simulation And Activity-Based Costing For Evaluating Alternative Manufacturing Cell Designs, Robert Williams, Paul Savory, Rodney Rasmussen

Department of Industrial and Management Systems Engineering: Faculty Publications

One effective technique for improving manufacturing efficiency involves the application of group technology part families and manufacturing cells. Selection of the best or optimum configuration of the manufacturing cell relies on the experience and judgment of the cell designer. This paper describes how activity-based costing (ABC) concepts can be integrated into a discrete-event simulation model and be used to evaluate manufacturing cell configurations. The output of the combined ABC simulation model provides a detailed “Bill of Activity” which allows the cell designer to consider costs as a critical factor in the cell design problem. Alternative cell configurations studied in this …

Preparing The Leaders For Mechatronics Education, Sema E. Alptekin

Industrial and Manufacturing Engineering

Mechatronics is the synergetic combination of precision mechanical engineering, electronic control and systems thinking in the design of products and processes. There is a need to develop interdisciplinary programs in Mechatronics that better prepare our graduates to design, build, and operate the products and systems of today and tomorrow. To address this need, National Science Foundation funded a project entitled "Preparing the Leaders for Mechatronics Education" undertaken by Cal Poly in 1995 - 1996. In this paper, the activities that took place during this two-year program is outlined. Several courses and course modules have already been developed and implemented by …

A Fluid Flow Analysis Of Aluminum 356.0 In The Vacuum Assisted Countergravity Method, John Launstein

Graduate Research Papers

The purpose of this study is to determine the fluid flow pattern obtained through the use of the countergravitaional process. The physical fluid flow model assists design engineers in their casting design of parts utilizing the LS-Vac technology thereby reducing tooling costs and time losses.

Recent Developments In Extrusion Freeform Fabrication (Eff) Utilizing Non-Aqueous Gel Casting Formulations, Greg Hilmas, John L. Lombardi, Robert A. Hoffman, Kevin Stuffle

Materials Science and Engineering Faculty Research & Creative Works

Extrusion Freeform Fabrication (EFF) was shown to be an extremely versatile method for fabricating Functionally Graded Materials (FGMs) The approach is inexpensive and potentially feasible for grading between any thermodynamically compatible ceramic-metal, ceramic-ceramic, or metal-metal material combination. Several material systems were investigated in this study including alumina-304 stainless steel, zirconia-304 stainless steel, alumina-Inconel 625, zirconiaInconel625, alumina-nickel aluminide, zirconia-nickel aluminide, titanium carbide-InconeI625, titanium diboride-nickel aluminide, and tungsten carbide-nickel aluminide. A controlled gradient was demonstrated between the end members for all of the above compositions. The FGMs were hot pressed to achieve near theoretical densities, providing flexural strengths as high as 1000 …

Top Gear Manufacturing, B Mahadevan

IIMB Management Review

No abstract provided.

Relay Ladder Logic And Petri Nets For Discrete Event Control Design : A Comparative Study, Edward Twiss

Theses

In the 1960's and earlier discrete event systems (DES) were controlled by hardwired electromechanical relay systems. In 1969 an electronic programmable logic controller (PLC) was introduced. PLC's have been programmed utilizing relay ladder logic (RLL). RLL is a graphical programming language with software "devices" used to emulate electromechanical devices. RLL programs, however, often become large and difficult to understand because its graphical representation of physical switching devices obscures the discrete event dynamics inherent in the process to be controlled. Petri nets are a methodology for modeling discrete event systems (DES). Using a Petri net based controller, a control strategy could …

A Study Of Kanban Based Production System In Cellular Manufacturing Environment, Sanjay Bhargava

Masters Theses

The study of effects of production data variabilities on Kanban based cellular manufacturing system is vital before its design and implementation because it would give better understanding of their uncertain behavior.

In this research, a detailed analysis of a Kanban system, with subcell scenario, under dynamic operating conditions is performed. The Control variables considered were number of Kanbans, processing time variability, demand variability and machine breakdown. The performance parameters considered were profit, production lead time, machine utilization and material processing lead time.

Approximately 200 simulation runs were made with 3 replications each by varying one control variable at a time. …

Development Of A Simple, Analytical Method To Optimize Machining Cycles For Non-Cnc Gear Hobbing Machines, Steven M. Klabunde

Graduate Research Papers

The purpose of this research project was to develop a simple, analytical method for the optimization of hobbing cycles on non-CNC gear hobbing machines. Such a method would allow manufacturers to optimize hobbing cycle times, reduce part costs, and improve productivity. There have been many advances in gear cutting tool technology. Because of these advances, the capabilities of modern cutting tools are beyond the capabilities of non-CNC machines designed more than fifteen years ago. The majority of the machines used today in gear manufacturing are of this vintage. The cycles on these machine tools are machine-limited, which is much more …

Design For Quality Manufacturability Analysis Of Total Nonconformity Damaged Parts, Samir R. Gami

Theses

The competitive nature of modern manufacturing, demands that innovative approaches be applied in order to have a competitive edge. Shortening the product development cycle, the period from initial design to full production, is a priority for most manufacturers today. The DFQM methodology addresses the issue of quality manufacturability (QM) - the likelihood that defects will occur during manufacture of a product in a standard plant. As a consequence, DFQM helps to shorten the design cycle time. The DFQM architecture identifies a variety of design factors and variables that influence specific defects. This process of influencing defects can be described by …

Design And Analysis Of Environmentally Safe Cooling Systems For Machine Tools, Haiping Xu

Theses

Many cooling systems of metal cutting and both their advantages and disadvantages have been reviewed. The cutting forces' relationships, stress distribution, energy consumption and heat generation of orthogonal processes are discussed. A two-dimensional finite element model has been developed to design and analyze a new proposed cooling device, which comes from the idea of "A Novel Cooling Device" proposed by Billatos et al. First, a thermal calculation is completed to compare the temperature difference between two different shapes of coiled pipe. Then, three different cutting conditions, which were considered in the experiments by Childs et al, are conducted under three …

Knowledge-Based System For Casting Process Selection, Ahmet Er, Edward Sweeney, Voya Kondic

Articles

Design of casting entails the knowledge of various interacting factors that are unique to casting process, and, quite often, product designers do not have the required foundry-specific knowledge. Casting designers normally have to liaise with casting experts in order to ensure the product designed is castable and the optimum casting method is selected. This two-way communication results in long design lead times, and lack of it can easily lead to incorrect casting design. A computer-based system at the discretion of a design engineer can, however, alleviate this problem and enhance the prospect of casting design for manufacture. This paper proposes …

An Investigation Of Diameter Measurement Repeatability Using A Coordinate Measuring Machine And A Multi-Baseline Repeatability Assessment Methodology, Bruce Marsh

Dissertations and Theses @ UNI

The need for reliable and consistent measurement has become more acute with the use of statistical process control (SPC), gage repeatability and reproducibility (Gage R&R) assessment, and high precision, computer-controlled gaging systems. Although it is often overlooked, the inspection methodology under which various features are inspected has an impact on Gage R&R results. This notion was confirmed when a 1993 thesis study substantiated inspection methodology as a source of measurement variability in direct computer-controlled, coordinate measuring machines (DCC/CMMs). Although this study explored a methodology to bring measurement variability under statistical control, the tested assessment methodology--single baseline repeatability assessment--was not validated. …

A Psychological Perspective On Service Segmentation Models: The Significance Of Accounting For Consumers' Perceptions Of Waiting And Service, Ziv Carmon, J. George Shanthikumar, Tali F. Carmon

Industrial and Manufacturing Engineering

We examine how service should be divided and scheduled when it can be provided in multiple separate segments. We analyze variants of this problem using a model with a conventional function describing the waiting cost, that is modified to account for some aspects of the psychological cost of waiting in line. We show that consideration of the psychological cost can result in prescriptions that are inconsistent with the common wisdom of queuing theorists derived according to the conventional approach (e.g., equal load assignments). More generally, our intention in this paper is to illustrate that aspects of the psychological cost of …

Analysis Of Cim Performance Using Different Lan Structures A Simulation Approach, Kirk Rawle

Theses

This research illustrates a systematic procedure for modeling and performance analysis of the integration effect of communication network to the physical system. The concept is to model different layouts of Computer Integration Manufacturing (CIM) using different Local Area Network(LAN) structures. The steps to accomplish this concepts are, a) To determine the performance measures for physical layouts and the communication network, in order to obtain a performance analysis. b) Modeling the physical layout using Promodel simulation package. c) Extracting results from the outcome of the simulation of the physical layout and using this as input to the communication network simulation. d) …

Auditing & Measuring The Need For Flexibility In A Manufacturing Facility, Kartika-Sari Stroman

Theses

Flexible manufacturing was created out of the need for facilities to be able to efficiently respond to changes in their environment so as to build a competitive advantage. Flexible manufacturing (FM) is currently viewed as a way for facilities to be able to introduce and produce multiple products quickly and more efficiently. In this research we will present some new tools to help managers address the changes that are affecting the facility.

An audit was developed to help system designers identify the changes that are impacting the facilities. The audit provides the opportunity to understand the changes that are occurring …

The Characteristics Of Agile Manufacturing That Can Be Implemented In The Manufacture Of Agricultural Equipment, Irvin L. Wilhelms

Graduate Research Papers

The problem of this study was to determine the characteristics of agile manufacturing and their applicability to a manufacturer of heavy agricultural equipment.

An Investigation Into The Use Of Expanded Polystyrene Patterns With The Loose-Sand, Vacuum Assisted Counter Gravitational Casting Process, John B. Vandersall

Graduate Research Papers

"Considered for years as a metal casting renegade, Expendable Pattern Casting (EPC) is believed by some to be tomorrows long-term casting future. Others, however, see it as an unproven headache-ridden process that makes the simple art of metal casting unnecessarily complex." (Lessiter, 1994, p. 36). The complexity of this process has been largely due to the lack of knowledge surrounding the interaction of the metal front and the dissipating polystyrene pattern.

Since the discovery of EPS as a pattern material, numerous applied research projects have been performed to gain a better understanding of the thermal breakdown characteristics of the material. …

First Line Supervisor Perceptions: The Effectiveness Of Specific Safety Training Materials, Cynthia Houlson

Graduate Research Papers

The problem of this study was to determine whether first line supervisors, who have been exposed specifically to Safety Focus Topics, perceived them as an effective tool in filling their role as a safety trainer.

Comparison Of Rapid Prototyping Systems For Implementation Into The Product Development Cycle, Daniel S. Koenig

Graduate Research Papers

The problems with the implementation and use of RP technology is choosing the best system from the fifteen or more RP systems commercially available and more than 20 other systems under development throughout the world (Wohlers, 1993). The problem of this study was to evaluate each of six preselected RP systems based on key characteristics. This study provides pertinent data so that those teams and individuals involved in the implementation and the use of a RP process can make sound decisions.

Development Of A Knowledge-Based System For Generating Process Plans Using Group Technology: A Study For Norfolk Naval Shipyard, William P. Keene Jr.

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to study and analyze the Norfolk Naval Shipyard's manufacturing methods of determining part families and generating part process plans for parts in the machine shop. A knowledge-based decision support system was designed based on knowledge acquired from machinist experts and documented sources of the Norfolk Naval Shipyard. The system interprets specific part information provided by the user, categorizes parts into part families and generates process plans to manufacture the parts. The system was evaluated and tested for parts provided by Norfolk Naval Shipyard.

An Analysis Of The Disposition Of Used Foundry Sand With Thermal Reclamation, Douglas Miller

Graduate Research Papers

The purpose of this study was to identify the economic and environmental concerns for the disposal, reuse, or reclamation of used foundry sand and show how foundries have developed options to landfills. The sand type and the reclamation processes available are the factors to use in determining whether disposal, reuse, or reclamation is appropriate. The continued use of landfills for disposal of used sand strongly indicates that reclamation and reuse techniques were either not understood or not as economical as disposal. Public concerns and new environmental laws demand that alternate means of disposal for used foundry sand should be developed …

Use Of Multiple Transmitters For 3-D Non-Intrusive Particle Tracking, Jitesh H. Agrawal

Theses

A method for non-intrusive tracking of a particle in 3-dimensional space, based on processing of signals emitted from a transmitter embedded in the particle, is being developed. This method uses a mathematical model, which predicts the induced signal in receivers present in the vicinity of flowing particle, and supporting numerical techniques. Specific application aspects related to improving the accuracy of this method are presented.

The focus here is the development of flexible software capable of processing information coming from multiple transmitters with known distinct spatial orientation. Implementation aspects of modified existing empirical corrections for improving model-reality agreement, and new techniques …

Development Of An Expert System To Facilitate A Pump Manufacturing/Warehouse Facility, Muhammad Mutahir Ghauri

Theses

The objective of this study is to evaluate the effectiveness of utilizing an expert system technology as it relates to manufacturing. It appears that our industries are still uncertain about this technology. In the first phase of this study, procedure for deployment of this technology is discussed. Secondly a knowledge-based expert system is developed, using a VP-Expert microcomputer shell. The system is made of three modules, inventory module, cost analysis module, and decision making module (for the selection of pumps).

A warehouse was selected for the analysis, which carries the finished product in the form of pumps. The quantities and …

Design For Quality Manufacturability Analysis For Common Assembly Process, Suriyanarayanan Ramachandra

Theses

The globalization of market economy has precipitated a dramatic increase in competition necessitating the need for higher quality products at lower cost in shorter time periods. Shorter life cycles and proliferation of products has made companies integrate all the phases of manufacturing to bring about a superior design. Design for Quality Manufacturability (DFQM) provides a technique to invoke manufacturing and assembly considerations while designing a product. The DFQM architecture identifies factors consisting of several variables that are influenced by certain error catalysts to cause one or more specific defects. A methodology is suggested to identify and quantify these error catalysts …

Case Study Of Assembly Defects In Manufactured Products, Michael J. Withka

Theses

Design for Quality Manufacturability (DFQM) is a design tool that empowers engineers to create designs that are easily and effectively transformed into manufactured products. The goal of this methodology is to make designers aware of design characteristics that may lead to product defects during the assembly process. Acknowledging the possibility of these defects will enable the designer to institute design modifications early in the design phase. The benefits realized in this approach are a reduction in the number of defects in the finished product, reduced product cycle times, a reduction in monitoring costs and a reduction in time-to-market.

This thesis …

A Systematic Approach To Defense Diversification, Sathappan Venkatachalam

Theses

The decline in defense spending has resulted in defense dependent companies seeking new markets through re-designing existing products, developing new products and restructuring their businesses. Defense diversification is defined as the process of transitioning a defense company's core capabilities (technologies, products, services) into commercial and non-Department of Defense government markets. A combination of site visits and review of the literature on defense diversification demonstrates the need for diversifying companies to adopt a systematic approach.

A concurrent new product development/product redevelopment model is proposed, based on the principles of concurrent engineering. The model consists of an eight phase development cycle and …

Design For Quality Manufacturability Analysis Of Missing/Misplaced Parts And Part Interference, Altaf Yusuf Tamboo

Theses

Design for Quality Manufacturability (DFQM) is an approach that addresses the issue of quality manufacturability (QM) - the likelihood that defects will occur during manufacture of a product in a standard plant. The DFQM methodology is based on the premise that defects found in assembled products are often influenced by some features of the design and/or assembly process (influencing factors). These influencing factors cause defects in the presence of certain error catalysts.

One of the influencing factors is geometrical features such as shape and symmetry. A classification scheme for part shape and symmetry is developed. This scheme is summarized in …