Mechanical Engineering Commons^™

Metal Casting Furnace Design Development Using Computer Simulation, Ramadhan Wahyu Irianto, Yanuar R.A. Pradana, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

Metal foundries still rely heavily on crucible furnaces. The current furnace design, which is currently being used by the partner industry, has been found to be not properly designed and will result in a reduction in efficiency. CFD simulation will be used to find the optimal melting furnace design. This research simulation consists of 3 stages: pre-processing, solving, and post-processing. There are two furnace geometries, cylindrical and hexagonal, while the burner location will be divided into 3 positions, namely P1, P2, and P3. The most optimal furnace design will be used as a basis for the verification testing process. The …

Evolution Of Residual Stress, Crystal Orientation, And Texture On Preheating Weld Treatment Of Low Carbon Steel Astm A572 Grade 42, Suratno Adi Saputro, Andoko Andoko, Poppy Puspitasari

Journal of Mechanical Engineering Science and Technology (JMEST)

Preheating is one type of heat treatment on the material prior to starting the welding process by increasing the temperature of the material. It is used to reduce the cooling rate during the welding processes to minimize the risk of residual stress and cracking during welding. Besides the benefits of welding, it also has a negative impact, especially on the integrity of the material, because the heating process at high temperatures will cause residual stress, which will affect the mechanical properties, chemical composition, and microstructure of the material, especially on Heat Affected Zone (HAZ). This study aims to analyze the …

Static And Modal Analysis Of A Box Structured Satellite Deployment Mechanism With Self-Actuated Torsion Joint, Dongping Sheng, Renzhe Ma, Chun Su

Journal of Mechanical Engineering Science and Technology (JMEST)

A brand-new satellite deployment mechanism with boxed structure and self-actuated torsion joints is proposed and an effective method to verify the feasibility of this mechanism is established in this paper. This mechanism has the characteristics of high base frequency, high ratio of deployed and folded space occupation ratio. In order to meet the design requirements, the related analysis and optimization need to be conducted, and several conclusions are obtained. Firstly, the modal analysis of deployment mechanism at folded and fully deployed state is analyzed, and the result showed that the proper wall thickness is the key parameter to satisfy the …

A Review Of Fault Detecting Devices For Belt Conveyor Idlers, Fahad Alharbi, Suhuai Luo

Journal of Mechanical Engineering Science and Technology (JMEST)

The shift towards automated inspection methods represents considerable progress in conveyor system maintenance, enhancing safety and efficiency while posing challenges in data analysis and implementation costs. This study critically analyses sensor technologies and inspection methods for detecting faults in conveyor belt idlers, highlighting their essential role in preserving the operational integrity of industrial conveyor systems. By synthesizing various research findings, the study assesses the effectiveness of different sensor devices in identifying defects, including built-in sensors, fixed sensor options like acoustic, ultrasonic sensors, cameras, accelerometers, and Distributed Optical Fibre Sensors (DOFS), as well as mobile sensor systems. Our findings emphasize the …

Simulation Of The Performance Of Kevlar Impregnated Shear Thickening Fluid Ballistic Test Results, Ridwan Prasetya, Andoko Andoko, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

This study explores the enhancement of Kevlar fabric’s ballistic performance through impregnation with Shear Thickening Fluid (STF) for potential application in soft body armor. The experimental approach often fails to elucidate mechanical phenomena critical for the development of lightweight and high-strength body armor designs. To address this limitation, the finite element method, specifically using ANSYS/LS-DYNA R.13, was employed for a comprehensive analysis. The simulation aimed to evaluate the impact of STF on Kevlar fabric by assessing projectile velocity, force exerted by the projectile onto the fabric, displacement, stress distribution, and fabric failure mechanisms. Kevlar yarn was modeled as a shell …

Analysis Of Avgas Fuel Spraying Schemes Using The Ansys Application Approach, Dimas Endrawan Putra, Nasrul Ilminnafik, M Fahrur Rozy Hentihu, Muh. Nurkoyim Kustanto, Danang Yudistiro, Skriptyan N.H. Syuhri

Journal of Mechanical Engineering Science and Technology (JMEST)

Avgas fuel consumption on Cessna trainer aircraft is very high. However, there has been little research regarding spray impacts in Cessna aircraft engines. The phenomenon of avgas spray colliding with the cylinder wall may occur during fuel injection, resulting in a changed spray radius and height, which will affect the mixing of fuel and air. In several aspects, this affects engine performance and exhaust emissions on Cessna aircraft. This research aims to determine and study the phenomenon of spray impact on avgasfueled aircraft engines. The fuel spray in the study occurred in the combustion chamber using pressure from a fuel …

Effect Of Addition Titanium Dioxide Nanoparticle On Properties Of Pineapple Leaf Fiber Mediated Tempo Oxidation, Rahmad Ikrom Ramadhan, Heru Suryanto, Ahmad Atif Fikri, Aminnudin Aminnudin, Jibril Maulana, Faqih Fadillah, Mohamed T. Mito, Kemal Masera

Journal of Mechanical Engineering Science and Technology (JMEST)

Indonesia is an agricultural country with the potential to grow many plants as natural fiber sources. In order to improve its properties, natural fiber needs to be treated by applying nanomaterial so that it can compete with the characteristics of synthetic fibers. The study aims to determine the influence of adding titanium dioxide (TiO2) nanoparticles on pineapple leaf fiber (PALF) characteristics. The PALF was collected from the Subang plantation (Indonesia). The chemical treatment was carried out with pre-treatment using an alkalization process for 3 hours, and the oxidation process was carried out with TEMPO. TiO2 nanoparticle grafting was carried out …

Computational Fluid Dynamics Analysis Of Temperature Distribution In Solar Distillation Panel With Various Flat Plate Materials, Trismawati Trismawati, Hendry Y. Nanlohy, Helen Riupassa, Susi Marianingsih

Journal of Mechanical Engineering Science and Technology (JMEST)

As the world population continues to grow, the demand for clean water is increasing daily, making it a crucial resource to access. However, there are ways to harness abundant resources like solar energy and seawater to produce clean water. The present studies have conducted experimental investigations to convert seawater into freshwater using solar stills, where solar energy is utilized as the primary heat source for evaporation. The temperature distribution inside the solar stills was analyzed using a flat plate made of three different materials: copper, stainless steel, and aluminum. To examine the temperature distribution and performance of the solar stills, …

Comparative Analysis Of The Effect Dual Spark Ignition And Single Spark Ignition On Performance And Exhaust Emissions In Bioethanol-Fueled Engines, Avita Ayu Permanasari, Ahmad Faizal Wahidin, Hasan Ismail, Erwin Komara, Poppy Puspitasari, Gina A. Lorenzo

Journal of Mechanical Engineering Science and Technology (JMEST)

Bioethanol is an alternative fuel that has a high octane value of around 100 to 110, making it difficult to be applied to spark ignition engines directly. So, it is necessary to make adjustments, including increasing combustion efficiency and thermal efficiency of the combustion chamber by increasing the compression ratio and adjusting the ignition system, both in single spark ignition (SSI) and dual spark ignition (DSI) types. The study aims to determine the effect of SSI and DSI applications on engine performance, specific fuel consumption (SFC), and exhaust emissions using 96% and 99% levels of bioethanol fuel. The results showed …

Performance Enhancement Of Dye Sensitized Solar Cell (Dssc) Through Tio2/Rgo Hybrid: Comprehensive Study On Synthesis And Characterization, Rustan Hatib, Khairil Anwar, Ramang Magga, Muh Anjas Astak, Denny Widhiyanuriyawan, Wardoyo Wardoyo

Journal of Mechanical Engineering Science and Technology (JMEST)

The TiO2 film is immersed in a graphite oxide solution, preparing it for thermal reduction, which converts the graphite oxide to reduced graphene oxide (rGO). This process produces rGO hybrid TiO2 photoanodes for dye-sensitized solar cells (DSSC). rGO in the TiO2 structure prevents electron recombination and improves overall efficiency. The main advantage of this method is its ability to prevent loss of rGO during the sintering process, which is a common problem with other methods. The study investigated heating temperatures ranging between 300˚C, 350˚C, 400˚C, 450˚C, and 500˚C to determine optimal conditions. The presence of rGO in the photoanode structure …

Pyrolysis Kinetics Of Spirulina Platensis And Non-Condensable Gas Product Distribution In A Fixed-Bed Reactor, Ahmad Yusril Aminullah, Sukarni Sukarni, Retno Wulandari, Muhammad Shahbaz

Journal of Mechanical Engineering Science and Technology (JMEST)

Energy is a fundamental factor for civilization development and sustainability. However, energy sources are dominated by non-renewable fractions, such as fossil fuels. Renewable biomass is projected to be a future fuel source. Spirulina platensis (SP) has numerous advantages compared to other biomass, and it is considered 3rd generation biomass that does not interfere with food and land usage and has a relatively low main decomposition temperature at 325.7℃. Thermogravimetric analysis (TGA) was conducted to observe SP kinetics parameters, especially activation energy. Kissinger-Akahira-Sunose (KAS), Ozawa-Flynn-Wall (OFW), and Starink iso-conversional methods reveal that SP has an activation energy of 152.33, 154.56, and …

Crashworthiness And Deformation Pattern Analysis Of Single And Double Wall With Addition Infill Structure, Redyarsa Dharma Bintara, Moch. Agus Choiron, Yahya Zakariya, M. Hasbi Ash Shiddieqy, Fajar Adi Pratama

Journal of Mechanical Engineering Science and Technology (JMEST)

Ship collisions are a phenomenon that often occurs in maritime transportation. One part of the ship that often experiences damage is the ship's wall (hull). This research aims to analyze and compare deformation patterns, stress distribution, and energy absorption in three wall models, single wall, double wall, and double wall, with the addition of infill structures. The infill structure used Polylactic Acid (PLA) polymer material because it provided convenience in the manufacturing process, while the walls of the test model used Aluminum 6063 material. The test model was developed by carrying out the design process using CAD software. Furthermore, a …

Durability Of Thermoplastic Polyurethane Round Belt Joint With Variations In Heating Methods And Cutting Shapes, Achmad Sabilarrosyad Prawiro Kusumo, Anggit Murdani

Journal of Mechanical Engineering Science and Technology (JMEST)

Thermoplastic polyurethane round belts are widely used for conveyors in various industries, particularly in the food and beverage industry, due to their flexible and abrasion-resistant characteristics. These belts are also popular in manufacturing industries because of their ease of joint. However, a common issue arises when the conveyor belt breaks during the production process. This problem can be attributed to the lack of parameters in the belt joining process at companies. Operators do not have a standard parameter for the joining process. When there is an improper joining operation of an operator, the conveyor belt could fail earlier than the …

Heuristic Approach To Comparing The Environmental Impacts Of Carbon Nanotube Production Methods, Ahmad Atif Fikri, Irham Fadlika, Albarrobi Nabila Saeful, Krisna Dwipa Muhdi, Daniel Febrian Pratama, Nasir Garba Bello

Journal of Mechanical Engineering Science and Technology (JMEST)

Carbon Nanotubes (CNTs) production so far has its own advantages and disadvantages. Some methods that can be used in producing CNTs are chemical vapor deposition (CVD), laser ablation, and arc discharge. The three methods have their own requirements, this causes different environmental impacts on each method. Studies into the environmental impact of the CNTs production process found that during thermal pretreatment of the reactant gas, more than 45 by-products were formed, including methane, volatile organic compounds, and polycyclic aromatic hydrocarbons. Calculating the environmental impact of CNTs production method often has challenges in implementation, because each production process has different systems …

Mechanical Properties Of Corner Lap-45 Types Joined Using Friction Stir Welding, Widia Setiawan, Nugroho Santoso, Felixianus Eko Wismo Winarto, Radhian Krisnaputra, Wirawan Widya Mandala, Jibril Maulana

Journal of Mechanical Engineering Science and Technology (JMEST)

Solid welding has always been concerned with probe design, pins, and joint strength. Many researchers have conducted studies on joints, such as butt joints, lap joints, and T joints, but the results show low strength. This study analyzes the mechanical properties of a new design of a 90o angle joint joined by friction stir welding. This study connected aluminum 6061 using the friction stir welding method using a rectifying jig and a probe with EMS 45 material. The corner joint designs used corner-lap 45 with feed rate as independent variables in 6, 8, 10, 15, and 30 mm/min and dependent …

Me-Em Enewsbrief, June 2024, Department Of Mechanical Engineering- Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Shape Memory Alloy Capsule Micropump For Drug Delivery Applications, Youssef Mohamed Kotb

Theses and Dissertations

Implantable drug delivery devices have many benefits over traditional drug administration techniques and have attracted a lot of attention in recent years. By delivering the medication directly to the tissue, they enable the use of larger localized concentrations, enhancing the efficacy of the treatment. Passive-release drug delivery systems, one of the various ways to provide medication, are great inventions. However, they cannot dispense the medication on demand since they are nonprogrammable. Therefore, active actuators are more advantageous in delivery applications. Smart material actuators, however, have greatly increased in popularity for manufacturing wearable and implantable micropumps due to their high energy …

Using Dft On Ultrasound Measurements To Determine Patient-Specific Blood Flow Boundary Conditions For Computational Hemodynamics Of Intracranial Aneurysms, Hang Yi, Zifeng Yang, Luke Bramlage, Bryan Ludwig

Mechanical and Materials Engineering Faculty Publications

Boundary conditions (BCs) is one pivotal factor influencing the accuracy of hemodynamic predictions on intracranial aneurysms (IAs) using computational fluid dynamics (CFD) modeling. Unfortunately, a standard procedure to secure accurate BCs for hemodynamic modeling does not exist. To bridge such a knowledge gap, two representative patient-specific IA models (Case-I and Case-II) were reconstructed and their blood flow velocity waveforms in the internal carotid artery (ICA) were measured by ultrasonic techniques and modeled by discrete Fourier transform (DFT). Then, numerical investigations were conducted to explore the appropriate number of samples (N) for DFT modeling to secure the accurate BC by comparing …

A Computational Investigation Of Wood Selection For Acoustic Guitar, Jonah Osterhus

Senior Honors Theses

The acoustic guitar is a stringed instrument, often made of wood, that transduces vibrational energy of steel strings into coupled vibrations of the wood and acoustic pressure waves in the air. Variations in wood selection and instrument geometry have been shown to affect the timbre of the acoustic guitar. Computational methods were utilized to investigate the impact of material properties on acoustic performance. Sitka spruce was deemed the most suitable wood for guitar soundboards due to its acoustic characteristics, strength, and uniform aesthetic. Mahogany was deemed to be the best wood for the back and sides of the guitar body …

Me-Em Enewsbrief, Mar 2024, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

A Multi-Material Platform For Imaging Of Single Cell-Cell Junctions Under Tensile Load Fabricated With Two-Photon Polymerization, Jordan Rosenbohm, Grayson Minnick, Bahareh Tajvidi Safa, Amir M. Esfahani, Xiaowei Jin, Haiwei Zhai, Nickolay V. Lavrik, Ruiguo Yang

Department of Mechanical and Materials Engineering: Faculty Publications

We previously reported a single-cell adhesion micro tensile tester (SCAμTT) fabricated from IP-S photoresin with two-photon polymerization (TPP) for investigating the mechanics of a single cell-cell junction under defined tensile loading. A major limitation of the platform is the autofluorescence of IP-S, the photoresin for TPP fabrication, which significantly increases background signal and makes fluorescent imaging of stretched cells difficult. In this study, we report the design and fabrication of a new SCAμTT platform that mitigates autofluorescence and demonstrate its capability in imaging a single cell pair as its mutual junction is stretched. By employing a two-material design using IP-S …

The Effects Of Uv Degradation On Polycarbonate Plastics Under Dynamic Compressive Loading, Hannah Bradford

Honors Theses

The objective of this experiment was to analyze the dynamic properties of polycarbonate plastics subjected to accelerated ultraviolet (UV) exposure. This was done by subjecting rods of polycarbonate plastic to UV degradation in a QUV accelerated weathering machine for 375, 750, and 1500-hours. These rods were then tested under dynamic compression using a Split-Hopkinson Pressure Bar at an average strain rate of 1600/s. The Split-Hopkinson pressure bar works by rapidly compressing a sample between 3 axial rods sending an elastic wave through the sample. The strain gauges on the incident rod and the transmission rod transformed the elastic wave deformation …

Numerical Investigation Of Supersonic Flow Over A Wedge By Solving 2d Euler Equations Utilizing The Steger–Warming Flux Vector Splitting (Fvs) Scheme, Mitch Wolff, Hashim H. Abada, Hussein Awad Kurdi Awad Kurdi Saad

Mechanical and Materials Engineering Faculty Publications

Supersonic flow over a half-angle wedge (θ = 15°) with an upstream Mach number of 2.0 was investigated using 2D Euler equations where sea level conditions were considered. The investigation employed the Steger–Warming flux vector splitting (FVS) method executed in MATLAB 9.13.0 (R2022b) software. The study involved a meticulous comparison between theoretical calculations and numerical results. Particularly, the research emphasized the angle of oblique shock and downstream flow properties. A substantial iteration count of 2000 iteratively refined the outcomes, underscoring the role of advanced computational resources. Validation and comparative assessment were conducted to elucidate the superiority of the Steger–Warming flux …

Blade Design And Validation Of Hydrokinetic Turbine To Harvest Water Current Energy, Setare Sadeqi

LSU New Orleans Theses and Dissertations

The innovative aspect of this research lies in the careful integration of cutting-edge technologies throughout the entire process of designing, fabricating, and testing the carbon fiber propeller for the 3-bladed horizontal axis ocean current turbine (OCT). SolidWorks software played a pivotal role in the initial design phase, enabling a meticulous and precise modeling of the propeller's geometry. The utilization of SolidWorks allowed for a detailed exploration of various design parameters, ensuring that the propeller's structure and form were optimized for performance in ocean current conditions. Moving beyond the realm of virtual design, the choice of carbon fiber as the fabrication …

Investigation On The Effects Of Biofouling On The Boundary Layer, Adam N. Bacon

LSU New Orleans Theses and Dissertations

This study is an investigation of the effect of biofouling on the boundary layer of a flat plate and a NACA 4-digit series foil. Three identical hydrofoils made of resin were placed in the Gulf of Mexico at Grand Isle, Louisiana, and observed and analyzed by marine biologists at the University of New Orleans for their species composition. The resulting biofouling that grew was primarily made up of barnacles and bryozoans. The foils were submerged in an open channel flume at zero incidence and subjected to a series of experiments whose arc-length Reynolds numbers ranged from approximately 13000 to 32000. …

Towing Tank Trials Of Hydrokinetic Turbine Scale Model To Support Marine Energy System Verification, Shahab Rouhi

LSU New Orleans Theses and Dissertations

In response to the escalating demand for sustainable energy solutions and the critical reevaluation of conventional fossil fuels due to environmental concerns, this dissertation embarks on a comprehensive exploration of hydrokinetic energy as a promising alternative. The study delves into the underexplored domain of hydrokinetic energy, leveraging innovative methodologies for effective utilization and harnessing, particularly through the development and investigation of hydrokinetic turbines.

In the realm of hydrokinetic energy conversion, our research has exclusively concentrated on horizontal-axis turbines, distinct from other turbine configurations. Noteworthy is the adaptation of a conventional horizontal-axis wind turbine for water currents, revealing enhanced performance through …

Cal Poly Fluid Power Vehicle Challenge 2024, J. Mason Gray, Ryan D'Amour, Alberto Acho Lopez, Christian Ferrandino, Johnathan Dietz

Mechanical Engineering

In this Final Design Review, the Cal Poly Fluid Power Vehicle Team competed in Norgren’s 2024 Fluid Power Vehicle Challenge. The design need of the competition was for college teams to compete with human-powered, hydraulic-driven vehicles in an endurance race, a sprint race, an efficiency race, and a regenerative power race. The competition need was to design a vehicle to win in as many races as possible, achieving the highest overall score and winning the competition. With a design emphasis on the endurance and sprint race, the Cal Poly team designed a fluid power system that fastened to a purchased …

Numerical Simulation Of Laser Induced Elastic Waves In Response To Short And Ultrashort Laser Pulses., Alireza Zarei

All Dissertations

In an era of intensified market competition, the demand for cost-effective, high-quality, high-performance, and reliable products continues to rise. Meeting this demand necessitates the mass production of premium products through the integration of cutting-edge technologies and advanced materials while ensuring their integrity and safety. In this context, Nondestructive Testing (NDT) techniques emerge as indispensable tools for guaranteeing the integrity, reliability, and safety of products across diverse industries.

Various NDT techniques, including ultrasonic testing, computed tomography, thermography, and acoustic emissions, have long served as cornerstones for inspecting materials and structures. Among these, ultrasonic testing stands out as the most prevalent method, …

Analysis Of Drying Behavior Of Robocasted Barium Titanate, Abigail Ortega

Open Access Theses & Dissertations

Finding an adequate ceramic formulation for material extrusion is a time-consuming process. The necessary equipment may be unavailable to perform the desired test. This study demonstrated an alternative to observe a material after extrusion to understand its drying process. This study focused on 55 solid loading volume percent and a 39 solid loading volume percent, each with two different binder treatments focusing on fresh same day made binder, a 30 day old, aged binder and lastly an artificial binder obtained by a fuming process. Firstly, a formulation was created and loaded onto a pressure-based syringe to be extruded with a …

Improved Ballistic Impact Resistance Of Nanofibrillar Cellulose Films With Discontinuous Fibrous Bouligand Architecture, Colby Caviness

All Theses

Natural protective materials offer unparalleled solutions for impact-resistant material designs that are simultaneously lightweight, strong, and tough. Particularly, the dactyl club of mantis shrimp features chitin nanofibrils organized in a Bouligand structure, which has been shown to effectively dissipate high-impact energy during powerful strikes. The mollusk shells also achieve excellent mechanical strength, toughness, and impact resistance with a staggered, layer-by-layer structure. Previous studies have shown that hybrid designs, by combining different bioinspired microstructures, can lead to enhanced mechanical strength and energy dissipation capabilities. Nevertheless, it remains unknown whether combining Bouligand and staggered structures in nanofibrillar cellulose (NFC) films, forming a …