Mechanical Engineering Commons^™

Study On Thermal-Fluid-Solid Coupling Characteristics For Helicopter Intermediate Spiral Bevel Gear Reducer, Dongping Sheng, Jie Yang, Chun Su

Journal of Mechanical Engineering Science and Technology (JMEST)

In the helicopter transmission system, the intermediate reducer is particularly special. It uses bevel gear pairs to change the transmission direction and to transfer the rotational speed effectively. Therefore, an in-depth study of the spiral gear pair is crucial to improve the overall performance of the helicopter rotor system. This study focuses on the study of the thermal-fluid-solid coupling characteristics and one-way steady-state thermal finite element analysis are conducted based on volume of fluid multiphase flow simulation theory to provide strong support for the design and optimization of the helicopter intermediate reducer. Several conclusions could be obtained. Firstly, it could …

Characteristics Of Liquid Products From Spirulina Platensis Pyrolysis Under Microwave Irradiation With Activated Carbon Additive, Mohammad Mirza Yuniar Romaz, Sukarni Sukarni, Retno Wulandari

Journal of Mechanical Engineering Science and Technology (JMEST)

Global energy consumption has surged due to the population's rapid growth, leading to a switch to using renewable and clean energy. Among various strategies for developing renewable and clean energy, biomass pyrolysis emerged as attractive, and microwave irradiation pyrolysis is a prominent technique. This research aims to determine the ideal parameters for microwave-assisted pyrolysis of Spirulina platensis (SP) microalgae in order to produce high-value liquid products with the addition of activated carbon (AC) additives. Liquid bio-oil products were characterized concerning their calorific value, chemical bonds, and thermal stability. This research also investigates product distribution as a function of AC loading. …

Optimization Of The Number Of Cylinder Blades In Coffee Pulper Machine: Finite Element Analysis And Simple Additive Weighting Methods, Mochamad Rifki Syahriza, Dwi Djumhariyanto, Nasrul Ilminnafik, Mahros Darsin, Danang Yudistiro, Hari Arbiantara Basuki, Robertoes Koekoeh Koentjoro Wibowo, Ahmad Syuhri, Sumarji Sumarji

Journal of Mechanical Engineering Science and Technology (JMEST)

The increasing interest in coffee in all circles means that coffee production and quality must always increase due to consumer demands. One way to maintain the quality of coffee beans is by breaking them down using a huller machine. This research aims to improve the optimization of coffee machines by modifying the cylinder blades of huller machines with variations of 3, 4, 5, and 7 cylinder blades in terms of static loading design and quality and production capacity of coffee bean breaking. The experiment was carried out using 400 rpm and breaking 10kg of dry coffee cherries every time the …

Simulation-Based Methodology To Investigate The Impact Of Material Type And Compressive Speed Variation On Effective Strain Rate And Springback, Radhi Nurvian Amrullah, Syamsul Hadi, Muhammad Akhlis Rizza

Journal of Mechanical Engineering Science and Technology (JMEST)

To obtain the desired results in the manufacturing process, especially the bending process, the occurrence of springback must be reduced. The effective strain rate must be increased to predict the increase in material. This study uses a simulation method to determine the influence of material type and compressive speed variation on spring back and effective strain rate. This study uses 3 kinds of materials: JIS SPHD, JIS A1100 BE, and JIS SN400A, and speed variations, namely: 90 mm/s, 105 mm/s, and 120 mm/s. This study shows that JIS SN400A material has the smallest springback value compared to JIS A1100 BE …

Turbine Engine Reliability Analysis Using Reliability Availability Maintainability (Ram), Oyong Novareza, Zefry Darmawan, Nasir Widha Setyanto, Effendi Bin Mohamad

Journal of Mechanical Engineering Science and Technology (JMEST)

Electrical energy is a vital necessity characterized by ever-increasing electricity consumption. The most dominating power plant in Indonesia in supplying electricity is the steam power plant, which is 50%. In its implementation, there is damage that occurs where the highest damage is to the general unit with the highest damage to the turbine unit. Therefore, the author uses the reliability, availability, and maintainability method or RAM. The purpose of this study is to determine the value of RAM on the turbine system at PLN and provide recommendations for improvements to system performance. The results showed that the MTTF and MTTR …

Innovative Approaches For Improving Orc Performance: A Review Of Pure Fluids, Zeotropic Mixtures, And Nanoparticles, Ebenezer Kumi, Vasudevarao Veeredhi, Christopher Enweremad

Journal of Mechanical Engineering Science and Technology (JMEST)

Although the organic Rankine Cycle (ORC) is said to effectively capture low-grade heat, its commercialization has been limited because of working fluid constraints and inefficiencies resulting from operating at low temperatures. This study reviews the working fluids used in organic Rankine cycles and examines how nanoparticles could enhance the efficiency of the ORC, by enhancing the thermophysical properties of the working fluids. Results from this review showed that zeotropic mixtures of pure fluids, provide a viable approach to improving the thermophysical characteristics of organic working fluids and have the potential to achieve thermo-economic performance superior to that of individual pure …

Innovations In Additive Manufacturing For Socket Fabrication: An Overview, Linda Ziyadatul Faiza, Wahyu Caesarendra, Wahyu Dwi Lestari

Journal of Mechanical Engineering Science and Technology (JMEST)

Additive Manufacturing (AM) has transformed the prosthetics industry, particularly in socket production, which plays a critical role in the comfort, fit, and functionality of prosthetic limbs. This article examines the latest advancements in AM technologies and their applications in socket fabrication. Key techniques like stereolithography (SLA), selective laser sintering (SLS), and fused deposition modeling (FDM) have facilitated the production of highly personalized, lightweight, and durable prosthetic sockets. These methods not only improve design precision but also allow for the use of biocompatible, flexible materials, enhancing both comfort and functionality. Digital design tools have streamlined the production process, reducing lead times …

Structural Simulation Of Wheelchair Ramp Using Finite Element Method, Bhre Wangsa Lenggana, Agung Nugroho, Ubaidillah Ubaidillah

Journal of Mechanical Engineering Science and Technology (JMEST)

Wheelchairs are essential mobility aids for people with disabilities, but they are often limited to flat surfaces and cannot overcome height differences. Portable ramps are an effective solution to overcome this limitation. This research aims to simulate and analyze the structure of a portable ramp for wheelchairs. Simulations were conducted using finite element method analysis software to assess the portable ramp's von Mises stress, deformation, and safety factor in various loading positions. Finite element method (FEM) analysis software was utilized to evaluate key mechanical properties, including von Mises stress, deformation, and safety factor, under different loading conditions and positions. The …

Analysis Of Biomass Briquette Mixed Bagasse And Sugarcane Peel On The Performance Of Forced Top-Lit Updraft Gasifier Stove, Intan Hardiatama, Aron Enruico, Yuni Hermawan, Muhammad Trifiananto, Skriptyan N.H. Syuhri

Journal of Mechanical Engineering Science and Technology (JMEST)

The population growth in Indonesia from 270 million in 2020 to 279 million in 2024 has increased LPG consumption, potentially leading to future fuel shortages. The top-lit updraft (TLUD) gasifier stove using renewable biomass materials, offers a sustainable alternative. Biomass such as bagasse and sugarcane peel can be optimized into charcoal briquettes with high calorific value and low emissions. The calorific value of briquettes can be further enhanced by blending other high–calorific biomass materials. This experimental research focuses on testing the calorific value of raw bagasse and sugarcane peel before carbonization, as well as briquette mixtures (70:30, 50:50, 30:70) using …

Characterization And Performance Nanofiltration Membranes In Water Quality For Goldfish (Carassius Auratus) Aquaculture, Inpita Casuarina Eqisetia Utari, Uun Yanuhar, Asus Maizar Suryanto Hertika, Heru Suryanto, Jibril Maulana, Nico Rahman Caesar, Mahrus Ismail, Leong-Seng Lim

Journal of Mechanical Engineering Science and Technology (JMEST)

Water quality is an important factor in aquaculture activities, including goldfish (Carassius auratus) farming. One approach to improving water quality is the use of nanofilters. This study aims to evaluate the performance of nanofilters made from Sargassum sp. with the addition of copper oxide nanoparticles. The method used involves the fermentation of bacterial cellulose from Acetobacter xylinum using Sargassum sp. extract as a medium, followed by homogenization and the addition of CuO-NPs at concentrations of 0.5%, 1%, and 1.5%, and subsequent oven drying. The nanofilter membrane will then be analyzed using SEM, XRD, and FTIR to characterize its properties. Performance …

The Potential Of Ramie Fiber As Reinforcement In Calcium Carbonate-Filled Polyester Resin Matrix Composites For Roofing Applications, Reinaldo Reinaldo, Djoko Setyanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Polymer matrix composite roofing materials available in the Indonesian market typically consist of 30%wt chopped strand mat glass fiber embedded in unsaturated polyester resin, filled with 30 parts per hundred resin (PHR) calcium carbonate. The aim of this research is to evaluate whether natural ramie fibers can potentially replace glass fibers. In the first stage of the study, we compared three types of natural fibers abundant in Indonesia: banana stem fibers, sugarcane bagasse, and ramie. Showed that ramie fiber performed the best. Its flexural strength, flexural modulus, and impact toughness were the highest, measured at 191.57 MPa, 6691 MPa, and …

Captivating Combustion Traits Of Bio-Oil Droplets Enriched With Bio-Additives From The Areca Shell Waste, Muhammad Alif Raehan, Helen Riupassa, Hendry Y. Nanlohy

Journal of Mechanical Engineering Science and Technology (JMEST)

Fuel derived from crude vegetable oil, such as coconut oil, holds promise as an alternative energy source to mitigate the increasing reliance on fossil fuels driven by population growth and industrial activities. The experiment involved suspending a single droplet of crude coconut oil mixed with activated carbon from areca shell waste and placed at the junction on R-type thermocouple (Pt/Pt-Rh13%). The droplets were ignited using a hot wire and subjected to atmospheric pressure and room temperature. Coconut oil comprises a saturated triglyceride carbon chain compound of approximately 91%, and areca shell waste possesses a porous structure that fosters favorable interactions …

Characterization Of Hydroxyapatite Derived From Scallop Shell Waste Synthesized By Sonochemical Method With Different Temperature Calcination, Diki Dwi Pramono, Poppy Puspitasari, Aminnudin Aminnudin, Jeefferie Abd Razak

Journal of Mechanical Engineering Science and Technology (JMEST)

One common bio-ceramic material used in the biomedical industry is hydroxyapatite. Because of its crystallographic and molecular resemblance to the hard tissues of the human body, hydroxyapatite is thought to form. Scallop shells are one natural source of hydroxyapatite, which is high in calcium. This study examines how the calcination temperature affects the characteristics of hydroxyapatite made from leftover scallop shell. Hydroxyapatite was synthesized via the sonochemical method, with calcination conducted at temperatures of 900°C, 1000°C, and 1100°C. The hydroxyapatite that was prepared was assessed using Xray diffraction (XRD) to determine the phase and crystallite size, Scanning Electron Microscopy (SEM) …

The Role Of Banana Peel Surface Pores Through Increasing Temperature For Efficient Hydrogen Production, Abid Fahreza Alphanoda, Erlanda Augupta Pane, Agus Riyanto, Avita Ayu Permanasari

Journal of Mechanical Engineering Science and Technology (JMEST)

Porous carbon derived from banana peel has been synthesized by increasing the temperature range variation from 180 oC - 270 oC. The prepared carbon was tested in an experiment using double-chamber photoelectrochemistry to see the results of hydrogen production. SEM-EDX, FTIR, and TGA analyses identified all banana peel carbons. Optical and electrochemical properties were analyzed and measured by UV-Vis, Tauc Relationship, and Pearson Absolute Electronegativity. The amount of hydrogen gas produced from the simulation of UV-A visible light irradiation on variations of BP-240, BP-210, BP-180, and BPNatural. The surface of BP-270 has more pores and can produce the most significant …

Impact Of Natural Polymer Proportions On The Fire-Retardant Properties Of Bioplastics, I Gusti Ngurah Nitya Santhiarsa, Ni Made Dwidiani, I Gusti Ngurah Putu Tenaya, I Gede Artha Negara

Journal of Mechanical Engineering Science and Technology (JMEST)

This research investigates the influence of varying proportions of natural polymers on the fire-retardant properties of bioplastic. Tapioca starch (Manihot esculenta) and corn starch (Zea mays) were selected as the bioplastic materials, with different weight fractions employed in the analysis. These materials, as naturally occurring polymers, are biodegradable and serve as promising components in the development of bioplastics. Fire resistance testing was conducted in accordance with ASTM D635-03, utilizing weight ratios of tapioca to corn starch at 70:30, 60:40, and 50:50. The results included photographic documentation of each specimen alongside the corresponding outcomes from the fire resistance tests. These images …

Analysis Of Titanium Mesh Ti6al4v Formation Using Die Press Forming Machine For Cranioplasty, Ahmad Ayyub Syaiful Rizal, Mahros Darsin, Robertoes Koekoeh K. Wibowo, Khairul Anam

Journal of Mechanical Engineering Science and Technology (JMEST)

Cranioplasty is required for patients with head defects, where the deformed part of the head is replaced with Ti6Al4V titanium wire implants. The titanium wire forming process is usually done manually, which can take a long time and give results that do not match the anatomical shape of the head. Therefore, it is important to develop domestic technology that can produce titanium wire automatically. This study aims to analyze the frame and mold of the automatic wire mesh molding machine before production. The tool is made using press forming method and finite element analysis with ANSYS software. The machine frame …

The Effect Of Mixing Time And Rotation Speed On The Consistency Of Dough Viscosity In A Horizontal Mixer, Muhammad Akhlis Rizza, Ekky Yovianto Dharsono, Anggit Murdani, Ratna Monasari, Radhi Nurvian Amrullah, Supa Kusuma Aji, Dian Noorvy Khaerudin

Journal of Mechanical Engineering Science and Technology (JMEST)

Cassava must go through several manufacturing processes before it becomes chips on the market, including the process of stirring the dough. The stirring process is an important stage in various food industries. In the stirring process, the viscosity change in the dough is influenced by various factors, including the stirring process time and speed in stirring. Research on dough viscosity is important because it is directly related to the quality of the final product. The purpose of this study is to provide recommendations to users, both in the context of using horizontal mixers and the process of making similar products. …

Tactical Activities To Improve The Effectiveness Of Concrete Batching Plant Based On Overall Equipment Effectiveness Analysis, Yurida Ekawati, Iddo Christian Sutrisno, Teguh Oktiarso

Journal of Mechanical Engineering Science and Technology (JMEST)

The growth of infrastructure projects has led to an increased demand for ready-mix concrete. A company that produces ready-mix concrete using a batching plant encountered difficulties in fulfilling customer orders due to the high rate of machine downtime. Overall equipment effectiveness (OEE) was employed to examine these issues at the tactical activities, where the root causes of losses that occur in the OEE components of availability, performance, and quality were addressed. The OEE analysis was extended to encompass maintenance effectiveness measures, as the anticipated solution to the problem was not the replacement of the machine, but rather an enhancement of …

Friction Modeling Of Composite Brake Pads With Ulin Wood Powder (Eusideroxylon Zwageri), Muhammad Rezki Fitri Putra, Hajar Isworo, Muhamad Noor Yasin, Rachmat Subagyo

Journal of Mechanical Engineering Science and Technology (JMEST)

This study investigates the performance of composite brake pads made of Ulin (Eusideroxylon zwageri) sawdust using simulation modeling, focusing on the pressure distribution, frictional stress, and contact state in five brake pad designs (DS0 to DS4). The brake pad designs used U-shaped grooves to improve cooling efficiency and debris removal. The results show that DS1 and DS2 exhibit the most uniform pressure distribution, with maximum values of 0.045 MPa and 0.048 MPa, respectively. DS1 recorded the highest peak frictional stress at 2.53 × 10-8 MPa, while DS2 showed consistent stress stability, reducing the possibility of uneven wear. DS3 achieved a …

The Influence Of Sodium Chloride Treatment On The Sisal Fiber Bundle’S Properties, Tamaryska Setyayunita, Heru Suryanto, Aminnudin Aminnudin

Journal of Mechanical Engineering Science and Technology (JMEST)

Currently, composite board manufacturing using natural fiber has the potential to be expanded due to environmental awareness. To produce high-performance natural fiber, treatment is needed to improve natural fiber’s mechanical and physical properties. One of chemical treatments is by using sodium chloride (NaCl). This study aimed to investigate the characteristics of sisal fiber after NaCl treatment. The concentrations of NaCl treatment were 1, 3, and 5 (wt.%) at room and boiling temperature and the soaking duration was 1 hour. Meanwhile, tensile strength, strain, and Young’s modulus were tested to evaluate the mechanical properties. Fiber bundle diameter, weight change due to …

3d Printed Microfluidic Fabrication Methodology, Characterization, Mechanical Design, And Applications In Electrostatic Artificial Muscles And Benthic Microbial Fuel Cells, Terak B. Hornik

Master's Theses

The fabrication of microfluidic devices often requires specialized methods. The development of these methods requires careful characterization and understanding of the processes involved. Using primarily PolyJet 3D printing technology, microfluidics offers a wide scope of applications such as microfluidic benthic microbial fuel cells (MBMFCs) and electrostatic artificial muscles. MBMFCs benefit from the confinement of the microbes resulting in close proximity between the electrode and the organisms. Using a modular design called the Sponge, assembly and upscaling is possible. Electrostatic artificial muscles benefit from a microfluidic approach due to the non-linearity of electrostatic attraction creating disproportionate benefits when miniaturized. When designed …

Intrinsic Manipulation Of Microstructure And Strength Of Ice-Templated Lithium Titanate, Rohan Parai

Mechanical & Aerospace Engineering Theses & Dissertations

This dissertation focuses on developing a fabrication landscape first time ever for directionally porous lithium titanate (LTO) materials using ice-templating technique. Ice-templating, a promising fabrication technique for porous ceramics, enables the formation of sintered structures with anisotropic pores that are aligned to improve mechanical stability of materials.

The work presented in this dissertation addresses advancements in tuning the porosity, strength, and microstructural characteristics of ice-templated LTO materials through adjustments of intrinsic variables, including sucrose as a water-soluble additive, variations in freezing front velocity, solute concentration, and solid loading. First, this study demonstrated that adding sucrose in LTO suspensions increased the …

Research On Development Status And Strategy Of Advanced Materials In Guangdong-Hong Kong-Macao Greater Bay Area, Ziwei Zhao, Can Wang, Weihua Wang, Qingli Huang

Bulletin of Chinese Academy of Sciences (Chinese Version)

Advanced materials are an important source of new quality productivity. Guangdong-Hong Kong-Macao Greater Bay Area is now facing the internal and external pressure of manufacturing upgrading, and there is an urgent need to play the leading and supporting role of advanced materials in the construction of modernized industrial system. This study combs through the basic situation of the development of materials science and industry in Guangdong-Hong Kong-Macao Greater Bay Area, analyzes its advantages, characteristics and problems in depth, and puts forward a number of suggestions around how to develop materials science, technology, and industry in the Greater Bay Area.

Experimental Study Of Drag Characteristics And Dust Removal Performance Of A Hybrid Wet-Filter Precipitator, Hang Yi, Zifeng Yang, Deqiang Chang, Xinjiao Tian, Jingxian Liu

Mechanical and Materials Engineering Faculty Publications

With their advantages of high dust removal efficiency and low drag characteristics, hybrid wet-filter precipitators have great potential for dust control in coal mines, but the underlying mechanisms are not well understood. In this study, to help fill this knowledge gap, a hybrid wet-filter precipitator consisting of a 40-layer metal filter and a defogger device is designed and a prototype is constructed. Experiments are conducted to investigate its drag characteristics under wind velocities from 0.85 to 5.68 m/s and its dust removal performance under wind velocities of 2 and 4 m/s. On the basis of results with the initial design, …

Collision Dynamics Of Compound Droplets In Microchannels: A Combined Numerical And Data-Driven Study, S M Abdullah Al Mamun

Dissertations

Understanding and predicting the hydrodynamic interactions of micron-scale droplets is crucial in a wide range of industrial and real-life applications, including microfluidics, pharmaceutics, drug delivery, food science, and enhanced oil recovery. These multi-phase and multi-scale phenomena are further complicated by the presence of core droplets of an immiscible fluid within shell droplets, known as compound droplets. The collisions and interactions of droplets in emulsions are influenced by various physical and geometric parameters, leading to distinct rheological and dynamic responses. This research employs numerical methods for a systematic parametric study of both simple and compound droplet pair collisions under confined shear …

Capacitive Sensors With Ultra-Small Capacitance For Smart Measurement And Control Systems, Rustam Baratov, Farrux Jabbor O'G'Li Ko'charov

Chemical Technology, Control and Management

This article discusses methods of low capacitance measurement of capacitive sensors. The results of the study of the amplitude-frequency (AF) and phase-frequency (PF) response of measurement circuits of capacitive sensors for low capacitances measurement, consisting of RC - differentiating elements are presented. The input and output parameters of the differentiating circuit and the complex transfer function are analyzed. The research results show that low capacitances measurement by measuring the rectangular pulses duration is the most effective measurement method.

Endwall Contouring For Lowering The Thermal Load And Augmenting The Turbine Efficiency, Arjun Kozhikkatil Sunil, Tide Porathoor Sunny

Makara Journal of Technology

Endwall contouring having significance in delineating ideal endwalls competent in thermal load depletion is the focus of this study. We have successfully utilized non-axisymmetric contoured endwalls to enhance turbine performance by controlling the secondary flow characteristics in a blade passage through steady-state numerical hydrodynamics. The supreme endwall pattern could lower the gross pressure loss at the design stage and is related to the size of the top-loss location being productively lowered. The selective numerical shape change using multi-objective optimization at the most prominent locations resulted in contoured endwall geometry and a considerable reduction of thermal exchange in the vane passage …

Modeling The Influence Of Internal Factors On Vehicular Mobility Performance, Aziz Mdimi

Tanzania Journal of Engineering and Technology (TJET)

Traffic mobility is significantly influenced by road conditions and the internal factors governing vehicular performance. Internal factors play a crucial role in vehicular mobility, influencing vehicles operate and performance. While existing vehicular mobility models primarily address external factors, external factors such as governor, engine, gear train and differential unit remain underexplored. This study formulates a comprehensive model to address this gap, focusing on the internal components that affect vehicular mobility. The proposed model employs both analytical and numerical methods to derive transfer functions for these subsystems using Matrix Laboratory (MATLAB), aiming to capture the dynamic behavior of vehicles under various …

Analysis Of Ballistic Capability In Making Bulletproof Multilayers Using Woven Ramie Fiber, Hardfacing Metal With Epoxy Matrix For Bulletproof Vests, Rizal Wahyu Permana, Syamsul Hadi, Bima Cahya Maula Dana

Journal of Mechanical Engineering Science and Technology (JMEST)

Bulletproof material in level III bulletproof vests must be created using hard and soft materials to prevent bullet penetration. Kevlar and SiC + PE are imported materials used as armor in bulletproof vests. The use of Kevlar and SiC is very dependent on foreign sources with high prices. An innovation was carried out by making bulletproof material using cheaper multilayer methods involving metal from hardfacing welding as a hard layer and ramie fiber as a soft layer with an epoxy matrix. To see the level of penetration and surface morphology structure in the specimens, 9 variations were made: 3 layers …

Study Of A Remote Wind Resource Assessment System Integrated With Internet Of Things, Filian Arbiyani, Filbert Filbert, Anthony Nathanael Theo

Journal of Mechanical Engineering Science and Technology (JMEST)

Wind energy is an emerging and popular source of clean energy due to its non-polluting nature and low cost. The efficient use of wind energy requires accurate and precise wind parameter measurements, which is where wind resource assessment (WRA) comes into play. The IoT and cloud-based systems have been applied to remote monitoring systems and provide crucial solutions for data acquisition, storage, and analytics in wind energy technology. This study aims to build a remote WRA system integrated with the Internet of Things. This study utilizes an Arduino Uno microcontroller, RK100-01 wind speed sensor, BMP280 temperature and pressure sensor, and …