Mechanical Engineering Commons^™

Fuzzy-Ahp Based Decision Support System For The Selection Of Optimal Maintenance Strategy For Meter Gauge Railway Infrastructure: A Review, Hamisi J. Maulid

Tanzania Journal of Engineering and Technology (TJET)

There are many uncertainties and complexities associated with maintaining Meter Gauge Railway (MGR) infrastructure, which calls for a methodical approach to decision-making. The development and application of a fuzzy-AHP-based decision support system (DSS) to select the optimal maintenance strategy for the MGR are presented in this study. The review covers research from 2013 to 2023 and focusses on the use of Multi-Criteria Decision Making (MCDM) and Fuzzy Analytic Hierarchy Process (Fuzzy-AHP) techniques in railway infrastructure maintenance. To manage the inherent uncertainties and subjective judgements involved in maintenance decision-making, the Fuzzy-AHP methodology combines fuzzy logic with the Analytic Hierarchy Process (AHP). …

Comprehensive Review Of Sensible Thermal Storage Systems For Cooking Applications, Anna K. Shariishoy

Tanzania Journal of Engineering and Technology (TJET)

This paper reviewed the sensible thermal storage systems specifically designed for cooking applications. The review focuses on the characteristics of storage materials, their practical applications, and the overall performance of the systems. The review consolidated an array of experimental and numerical research published across various sources such as journals, conferences, books, online resources, and professional reports. A systematic review is used to reach the conclusion of this paper. Significant findings from this study include the wide range of storage capacities attained from small-scale systems that can store ~1–5 MJ of energy for a single meal to bigger systems that can …

Calibration Of Measurement Tools In The Experimental Test Rig For Hydropower Performance Evaluation, Ombeni J. Mdee

Tanzania Journal of Engineering and Technology (TJET)

The demonstration of a typical hydropower plant requires the development of a test rig with the installation of tools to measure the performance parameters. The measurement tools require a calibration process to improve the quality of recorded data. This study involved the calibration of traditional and automated measurement tools connected to the hydropower test rig through an Arduino microprocessor. The automated measurement tools included a pressure transducer, flow meter, digital tachometer, and torque transducer, while traditional measurement tools, including a pressure gauge, concrete water tank, contact tachometer, and force lever arm balance, were connected in the same test rig during …

Review On Gas-To-Liquids Conversion Technology: Lessons From Case Studies And Potential Strategies For Implementation In Tanzania, Joseph H. Kihedu

Tanzania Journal of Engineering and Technology (TJET)

This review paper explores the transformative potential of Gas-to- Liquids (GTL) technology for harnessing Tanzania's vast natural gas resources. With significant discoveries of natural gas reserves totalling up to 57 Tcf in fields such as Songosongo, Mnazi Bay, Block 1, 2, 3 and 4. Tanzania is positioned to leverage GTL technology to convert these resources into high-value liquid fuels like gasoline, diesel and naphtha. Review of GTL process, its products and applications has been done. By analysing successful GTL projects globally and drawing lessons applicable to Tanzania, this paper provides strategic recommendations for policymakers and stakeholders to foster GTL development. …

A Review Of Lithium-Ion Battery Capacity Fade Deceleration At Power Fluctuations In Renewable Energy Systems, Isaac Gwayi

Tanzania Journal of Engineering and Technology (TJET)

Application of lithium-ion (Li-ion) batteries to store energy in renewable energy systems (RESs) is increasing due to their promising properties. Therefore, it is crucial to understand aging behaviours of Li-ion battery during RES life time as this directly affects cost of energy. Li-ion battery aging can be categorised into calendar aging and cycle aging. Calendar aging depends mainly on temperature and state of charge (SoC). In addition to temperature and SoC, cycle aging depends also on charge and discharge current rates and cut-off voltages. Higher current rates lead to faster Li-ion battery aging. It is necessary to identify appropriate battery …

Assessment Of Maintenance Performance Level Of Selected Hydropower Plants In Tanzania, Mahamudu H. Mtebwa

Tanzania Journal of Engineering and Technology (TJET)

Despite significant progress in increasing electricity access to over 78%, electricity reliability in Tanzania remains a concern, with frequent power outages reported. Maintenance issues in hydropower plants have been identified as a critical factor contributing to this problem. However, the specific maintenance performance levels have not been fully assessed. This study conducts a comprehensive evaluation of the maintenance performance of four key hydropower plants: Kidatu (204 MW), Kihansi (180 MW), Mtera (80 MW), and New Pangani Falls (68 MW). Data collected from staff surveys and maintenance records between 2018 and 2022 were used in the study. Although staff demonstrated a …

Strategies For Overcoming Product Certification Challenges Faced By Food Manufacturing Small And Medium Enterprises In Tanzania, Peresi M. Bulemo

Tanzania Journal of Engineering and Technology (TJET)

Small and Medium-sized Enterprises (SMEs) in Tanzania face significant regulatory challenges within bureaucratic, costly, and centralized environments. These challenges contribute to an increase in unregistered enterprises and substandard products in the market. This study aimed to address the challenges SMEs encounter in obtaining product certification to improve their product quality and market competitiveness. A mixed-methods approach was employed, combining qualitative and quantitative research through surveys, interviews, and document analysis, with respondents from the Tanzania Bureau of Standards (TBS), Small Industries Development Organization (SIDO), and SMEs in the food manufacturing sector. Data analysis was conducted using SPSS and JASP. Findings revealed …

Predicting The Influence Of Aggregate Size And Distribution On Cementitious Concrete Properties: A Review, Innocent J. Macha

Tanzania Journal of Engineering and Technology (TJET)

Cement concrete has been in use for centuries as one of the primary construction materials. Its demand in the construction industry is expected to continue for several centuries before the full development of alternative products. However, one of the main areas of research interest is understanding how its constituents can be tailored to make its properties predictable to reduce risks associated with structural failures, reconstruction and reduced durability. These hindrances associated with cementitious concrete result from several attributes, including constituent material characteristics, mixing ratios and workmanship. Understanding the predictability of cement concrete properties requires computer modelling tools to provide reliable …

Towards Metrology 4.0 In Developing Countries’ Manufacturing Industries, Jailos Nzumile

Tanzania Journal of Engineering and Technology (TJET)

A systematic literature review was conducted to unveil the status of the digital transformation of metrology in developing countries, as they are lagging in utilising fourth industrial revolution (IR4.0) technologies to transform manufacturing industries. A PRISMA technique was employed using various keywords to identify, screen, and select the relevant literature. Forty publications were selected for the review, mainly discussing IR 4.0 technologies in metrological operations. The results indicate that the digital transformation of metrology has yet to be initiated in developing countries. However, the employment of IR4.0 technologies in advancing metrological operations in manufacturing industries is mostly discussed in the …

Root Cause Analysis Of Performance Degradation For An Xyz Thermal Power Plant In Tanzania, Simon I. Marandu

Tanzania Journal of Engineering and Technology (TJET)

Thermal power plants in Tanzania have been experiencing performance degradation, typically arising from component and subsystem failures, which contribute to power system instability and unreliability. This paper presents a case study of the root causes of performance degradation of an XYZ thermal power plant. The study was conducted by reviewing plant documentations, including maintenance and operational data logbooks, and by standardising the approach through the adoption of ISO 14224:2016 for maintenance and reliability data exchange. Data evaluation was carried out using principal component analysis and scree plot analytical techniques to enhance the depth and accuracy of root cause identification. Additionally, …

Effects Of Cutting Conditions On Tool Temperature And Material Removal Rate In Turning Operations, Simon I. Marandu

Tanzania Journal of Engineering and Technology (TJET)

Cutting conditions in manufacturing processes have effects on tool temperature and material removal rate. The objective of this study was to investigate the effects of cutting conditions namely spindle speed, feed rate, depth of cut and tool nose radius on tool temperature and material removal rate in turning operations. A total of 81 experiments were conducted to measure tool temperature and material removal rate in order to determine the effects of cutting conditions on tool temperature and material removal rate using ANOVA and regression analysis. The results show that tool nose radius, depth of cut, and spindle speed are significant …

Potential Use Of Pump As Turbine Coupled To Self-Excited Induction Generator For Micro-Hydro Cooking And Cooling Applications, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

Clean cooking and efficient cooling in developing countries have recently become areas of great focus. Further, the environmental impact of flooding in high-capacity hydroelectric plants has become a major concern. As a result, there is growing emphasis on developing sustainable and decentralized energy solutions, focusing on the potential of micro-hydro systems, especially in rural and remote areas. Although there are several alternative energy generation methods, their application is not straightforward. One of the latest technologies under research is using pumps as turbines coupled to an induction generator. This paper explores through a rigorous experimental approach the possibility of using a …

The Role Of Internal Factors On Vehicular Mobility, Aziz Mdimi

Tanzania Journal of Engineering and Technology (TJET)

Vehicle mobility internal factors are influenced by the performance state of the road surface quality, governor, engine, gear train, differential unit and mobility unit. Studies on vehicular mobility models exist for off-road external factors but absent on on-road internal factors. The on-road internal factors model describes the vehicular mobility performance as a function of internal factors. In the current undertaking, results are generated by the determination of mobility performance characteristics with the application of 2nd Order Ordinary Differential Equations and using Laplace operator with MATLAB Software simulation. The effect of road surface against the time taken varies accordingly. At a …

Optimal Placement Of Distributed Generation Units In Power Distribution Networks Using Particle Swarm Optimization, Owdean M. Suwi

Tanzania Journal of Engineering and Technology (TJET)

Power losses and voltage drops in distribution networks are critical issues in power system operation, reducing efficiency, reliability, and overall quality of the power supply to customers. Additionally, the rising electricity demand, deregulation of energy markets, and congestion in transmission networks have further contributed to the declining performance of the grid. To address these challenges, integrating distributed generation units (DGUs) into electric distribution systems has gained significant attention. Furthermore, the integration of DGUs into conventional fossil fuel-based power plants is becoming necessary to reduce greenhouse gas emissions. However, proper placement and sizing of DGUs are crucial for achieving optimal benefits. …

Optimizing The Processing Temperature For Synthesis Of Silver Nanoparticles Within Cellulose-Wool Keratin Supramolecular Matrix Using Butylmethylimmidazolium Chloride Ionic Liquid, Ngesa E. Mushi

Tanzania Journal of Engineering and Technology (TJET)

To date, the synthesis of silver nanoparticles on the surface of cellulose and wool keratin biopolymer, while dissolved in ionic liquid, is attractive because of its biomedical potential. However, the optimal processing temperature for the nanoparticle formation is unclear. The previously reported temperature of approximately 120°C gives unpredictable results. The current study employs a combination of 50% cellulose and 50% keratin, along with 69 mg of silver chloride, in Butylmethylimidazolium Chloride BMImCl ionic liquid, using a single-pot process to produce a supramolecular film via non-derivatized mechanochemical interactions. The primary objective is to experimentally establish the processing temperature to achieve stable …

Aerospace Fastener Installation Tool, Anthony I. Berghout, Matthew K. Eggers, Liam Dunsmore, Jose Pardo

Mechanical Engineering

Contamination, particularly in aerospace manufacturing environments, is a significant concern, especially with fastener designs that incorporate torque-rated breakaway pieces for easier installation. These breakaway pieces are also known as pintails. Howmet has tooling that can collect loose pintails during installation, but they have small capacities and are not ergonomic for aerospace technicians. Their current need is for a light and ergonomic tool capable of installing a wide variety of Ergo-Tech® fasteners while having a large capacity to collect pintails and improve aerospace manufacturing methods. For this Critical Design Stage, we have finalized a design that allows Pintails to pass through …

Edwards Lifesciences: Esheath+ Scoring Automation, Tony Lee Avina, Kirth Hirth, Charith Sunku, Humberto Salazar-Banuelos

Mechanical Engineering

Due to a non-disclosure agreement with our sponsor, Edwards Lifesciences, the contents of the report have been omitted.

Foot Pedal Assistive Device, Julian Rubinstein, Connor Jessen, Isabelle Utsler, Sydney Alexander

Mechanical Engineering

Individuals with lower-limb mobility problems may have trouble accurately locating the pedals of a three-pedal manual transmission car, and some medical conditions cause individuals to fatigue more quickly when driving. This project aimed to create a device that assists in locating the user’s feet, indicates to the user which pedals are currently in use, and provides a visual and physical warning if they are not in the correct place. The project sponsor, Alan Keizer, is the primary stakeholder in this project. This device will be designed specifically for Alan’s Subaru BRZ and will address Alan’s specific lower-limb mobility issues that …

Torsional Vibration Kit Simulator (Tks), Joseph Thachet, Luca Lawson, Ryan Ota, Otis Mcloughlin

Mechanical Engineering

The goal of this project was to create torsional vibration on a shaft while limiting axial and radial vibration. To do this an eddy current brake was used to slow down a rotating shaft. The electromagnets used to create the eddy currents are able to be turned on and off at a frequency produced by a function generator. This power cycling of the electromagnets creates an alternating braking force thereby inducing torsional vibration while limiting the other two vibration types

Heart Valve Leaflet Cutting Automation, Gabriella Aclan, Josh Deweese, Lizzie Dilao, Jason Wong

Mechanical Engineering

The content contained in this report is confidential and proprietary information of Edwards Lifesciences.

Large Backflow Check Valve Life Cycle Test Stand, Colin Bentley, Christopher Carloni, Ethan Gray, Luke Romanini

Mechanical Engineering

Backflow preventers are plumbing devices containing internal check valves used to prevent cross-contamination between downstream contaminants and potable water supply. Zurn Wilkins needs a life cycle test stand to mechanically force open check valves submerged in contaminated water and verify check performance. The stand needs to be modular to work with a range of check types and sizes.

Zurn Wilkins is the primary stakeholder for this project. Secondary stakeholders include commercial and residential building owners, contractors, and water utility companies, who rely on their products for safe and efficient water management. The team for this project consists of four Cal …

Hydropower Collegiate Competition, Aiden D. Foster, Devon Bountry, Joanna Vo, Timothy Rinker, Amanda Rodriguez, Minh Nguyen, Eli Haushalter, Sophie Watkinson, Maiya Holton, Breanne Evans

Mechanical Engineering

The Cal Poly SLO HCC team presents a feasibility study and engineering design review package for retrofitting the non-powered Ritschard Dam in Colorado into a hydroelectric facility as part of the 2025 Hydropower Collegiate Competition. Through a rigorous and multi-staged assessment of plausible dam sites in the western US, the team has chosen the Ritschard Dam in Colorado to implement an electromechanical component designed to accommodate a large range of flowrates stemming from a large variance in upper reservoir capacity due to geographical and climate effects. The team evaluated non-powered dams based on technical feasibility, electric grid proximity, power generation …

Fused-Silica Microelectromechanical Systems For Relative Gravimetry, Ethan Doerstling

Theses and Dissertations

Gravimeters are devices that measure gravitational acceleration which can be used by the United States Air Force (USAF) in the areas of navigation and remote sensing. Fused-silica microelectromechanical systems (MEMS) devices offer capabilities to make inexpensive relative gravimeters with higher thermal stability than common silicon devices while maintaining good gravitational sensitivity. The fused-silica devices in this research were designed, simulated, fabricated, and tested to observe their performance as gravimeters. The devices exhibit properties of highly sensitive accelerometers but the current designs do not qualify as gravimeters. This study provides information to improve the sensitivity and stability of these fused-silica MEMS …

Conversational Social Robot, Julianna M. Christopoulos, Mackenzie Goldman, Cece E. Hujanen, Jared Hunter

Mechanical Engineering

Background: Social robots are used in various settings to reduce burden on human workers and expand opportunities for people in need of assistance.

Challenge: Design a humanoid robot head and torso capable of holding conversations and interacting with a user using a LLM and motion. Conversations are limited to discussing Cal Poly resources and opportunities with visitors to the Bently Research Center on campus.

Mechatronic System Mobility Enhancement Device For Patient With Cerebral Palsy, Tori N. Saenz

Honors Theses

The primary objective of this project was to design and fabricate the electronic, power, and control systems for a mobility device oriented around the needs of a young man with cerebral palsy, named Lane Bryant. This project was completed during the Mechanical Engineering Capstone Senior Design Experience. A separate group completed the design and fabrication of the wheelchair’s ergonomic and structural elements. Research on the typical operation of existing electric wheelchairs was completed to form a baseline of operating parameters. Observations from a previous wheelchair for Lane, called the Wild Thing, guided many design choices. The power supply was designed …

Pressure Switch Tester, Michael Starasinich, Andrew Dobson, Jordan Huschen, Mitchell Smith, Melvin Brown Iii

Honors Capstones

Abstract—- The Pressure Switch Test Stand is a comprehensive and automated testing solution designed to streamline the actuation and validation of simultaneously. At the core of the system is a PLC-controlled architecture that enables precise control and simulation of pressure conditions, replicating real-world scenarios to ensure accurate and reliable switch performance.

This test stand integrates robust mechanical fixtures, a reliable pneumatic control system, custom-designed electrical circuits, and a modular software interface, working in unison to deliver consistent and high-fidelity testing outcomes. Each pressure switch undergoes a sequence of pressure ramps and holds, with the system continuously monitoring switch states, activation …

Development Of A Cost-Effective Daq For Measuring Brake Performance In Race Cars, Adrin Alias

2025 Spring Honors Capstone Projects - Archive

This project explores the feasibility of creating a cost-effective data acquisition (DAQ) system for high-speed, real-time brake performance testing of Formula SAE racecars. The research addresses the limitations of the current MoTeC DAQ system currently employed by the team, which is costly and time-consuming to set up for on-car testing. The team will use a brake dynamometer for steady-state comparisons of different brake pad compounds (senior design project), but evaluating real-world performance requires on-car testing. By systematically comparing various hardware platforms, sensors, communication protocols, and storage solutions, this project aims to balance cost-efficiency with reliability and performance. The research evaluates …

Computational Modeling Of Torque Arm And Load Cell Interactions In Uta Racing Brake Dynamometer, Anthony A. Aiyedun

2025 Spring Honors Capstone Projects - Archive

The UTA Racing Team is developing a brake dynamometer to measure the coefficients of friction of various brake pads and calipers under controlled conditions. The dynamometer simulates on-track braking scenarios, testing brake pads at temperatures up to 1300ºF and pressures similar to racing environments. Its primary goal is to generate accurate friction vs. temperature graphs for various brake pad and rotor combinations, addressing the need for dedicated testing equipment. This project creates an ANSYS simulation of the torque arm and load cell interaction. The computational model accurately represents the relationship between applied torque and measured load cell force, incorporating precise …

Reconfigurable Python Autopilot Software For Rc Aircraft, Kate Doiron

Honors Theses

No abstract provided.

Development Of A 3-Dof Contactless Magnetic Joint Actuator, Elle Whitney

Theses and Dissertations

The magnetic joint actuator is a relatively recent research technology that expands on the brushless DC motor to encompass rotation in three degrees-of-freedom. These actuators involve a stator with a series of electromagnetic coils oriented normal to a spherical permanent magnet rotor which can be controlled by modulating the current of the stator coils. The development of a magnetic joint actuator that operates without a physical connection between the stator and the rotor has wide applications for robotics in dust-sensitive environments, where a device with bearings would otherwise falter. This work details the design, sensing, and control of such a …