Mechanical Engineering Commons^™

On The Evolution Of Cae Research, Clive L. Dym, Raymond E. Levitt

All HMC Faculty Publications and Research

Less than a decade ago it seemed that a new paradigm of engineering–called computer-aided engineering (CAE) – was emerging. This emergence was driven in part by the success of computer support for the tasks of engineering analysis and in part by a new understanding of how computational ideas largely rooted in artificial intelligence (AI) could perhaps improve the practice of engineering, especially in the area of design synthesis. However, while this “revolution” has failed to take root or flourish as a separate discipline, it has spawned research that is very different from traditional engineering research. To the extent that such …

A Fringe Center Detection Technique Based On A Sub-Pixel Resolution, And Its Applications Using Sinusoidal Gratings, Ming Chang, Paul P. Lin, Wen Chih Tai

Mechanical Engineering Faculty Publications

A common problem in optical profilometry is the accuracy in locating fringe centers. This paper presents an accurate fringe center detection technique based on sub-pixel resolution using the fringe projection method. An optimum reconstruction filter is developed which has low sensitivity to noise. In fringe center detection, computer simulation results of using one-pixel and sub-pixel resolutions are compared. The detection technique is then applied to radius measurement of cylindrical objects and surface profile measurement of diffuse objects. The experimental results thus obtained through the proposed optimum reconstruction filter show significant improvement in measurement accuracy.

Selection And Implementation Of A Cad/Software System For Navigator Boats, Brian J. Finzel

Honors Capstone Projects and Theses

No abstract provided.

Neural Network Based Vowel Articulation Training Aid For The Deaf, Andrew E. Beck

Electrical & Computer Engineering Theses & Dissertations

Teaching the hearing-impaired to speak is both a challenging and rewarding task. Computer-based training aids are valuable teaching tools and complement the speech therapist in the speech training process. We have developed a computer based vowel articulation training aid designed to provide visual feedback for vowel production to the hearing-impaired user. This system transforms speech spectra from a multi-dimensional acoustic space to a two-dimensional phonetic space which is displayed on a computer monitor. The system signal processing includes feature extraction designed to mimic the properties of the human ear, and a transformation to a two-dimensional display space. The dimensionality transformation …

Toward The Optimization Of Cell Operator Productivity In Computer Integrated Manufacturing, David Leonard Gobeski

Dissertations and Theses @ UNI

Computer integrated manufacturing (CIM) has been seen as the answer to maintaining the lead in American productivity. The cell operator was seen as being critical to the success of CIM. The design of the operator's job was seen as very important. As manufacturing engineers design cell jobs, including the roles and tasks, with the operators, it was believed important for the engineer to know what motivated the cell operator. However, past studies of supervisors and their subordinates have shown that supervisors are unable to predict the importance of the elements of job enrichment of the subordinates. It was questioned whether …

Data Communication Between An Expert System Shell And A Conventional Algorithmic Program With Application To Cam Motion Specification, Paul P. Lin, An-Jen Yang

Mechanical Engineering Faculty Publications

Although more and more expert system shells have begun to provide communication interfaces to conventional procedural languages, the interfaces are basically shell- and language-dependent. This paper presents a simple, shell- and language-independent data communication technique between a shell and a procedural language via a concept analogous to the handshake data transmission used in microprocessors. A control file is used for the action of handshake. The communication interface is between two data files in two different language environments. A program written in a LISP-based expert system shell, OPS 5, and one written in a procedural language, FORTRAN, were …

A Comparison Study Of Teaching Basic Drafting Concepts Using Computer-Assisted Equipment And Traditional Methods To Beginning Drafting Students At The Secondary Level, Thomas K. Farmer

Graduate Research Papers

The purpose of this research was to determine if basic drafting concepts and skills can be learned by students using computer-assisted drafting equipment as well as those students who were taught using traditional drafting equipment. The two methods used in this study were a traditional style, using drafting boards with drafting machines, and the second was using computer-assisted drafting equipment (CAD).

Computer-Aided Analysis And Design Of Rectangular Buried Tank Walls And Its Safety Factor Evaluation Based On Yield Line Analysis, Rakiya J. Fatoohi

Civil & Environmental Engineering Theses & Dissertations

This thesis presents the results of a study that determines the true safety factor of underground square reinforced concrete tank walls.

The walls are analyzed and designed by elastic method. The amount and distribution of the reinforcement was determined by use of the alternate design method (working stress) in compliance with all ACI code requirements. The wall's ultimate moment was computed by use of yield line theory assuming non-isotropic reinforcement. The ultimate value of the earth pressure was computed and compared with the elastic analysis and design values to give the true safety factor.

The results of this study indicate …

Structural Sensitivity Analysis On A Parallel Computer, Niu Kian Teck

Civil & Environmental Engineering Theses & Dissertations

Substructuring formulation using adjoint variable approach has been developed for design sensitivity analysis and optimization of large scale structures. In this study, the procedure for statics and sensitivity analysis are re-examined to propose a programming scheme which can be implemented either in a sequential or parallel environment. The computational times of the substructuring formulation using a single processor versus multi-processors are compared to see the effectiveness of the formulation in the concurrent computing environment.

The Cost Effectiveness Of System Response Between Mainframe And Micro Cadam, Dan Rae Teel

Graduate Research Papers

The purpose of this study is to show the cost effectiveness of system response between Mainframe and Micro CADAM.

Issues In The Design And Implementation Of Expert Systems, Clive L. Dym

All HMC Faculty Publications and Research

This article discusses the issues that arise in the design and implementation of expert systems. These issues include: task selection; the stages of development of expert system projects; knowledge acquisition; languages and tools; development and run-time environments; and organizational and institutional issues. The article closes with some speculation about the future development of expert systems.

A Method For Determining What Effect Cad Has On Productivity In Gage Design Of The Process And Tool Department At The John Deere Component Works, Dan Rae Teel

Graduate Research Papers

The purpose of this study was to develop a method for determining what effect CAD has on productivity in the Gage Design area of the Process and Tool Department of the John Deere Component Works.

Design Of Multivariable Feedback Control Systems Via Spectral Assignment, Mohsen Marefat

Electrical & Computer Engineering Theses & Dissertations

During the past 15 year s significant advances have been made towards developing viable synthesis- techniques for multivariable feedback control systems. The entire aggregate of this theoretical work has been reviewed and consolidated. Diverse notations have been standardized into a single system. A two-step design philosophy for spectral assignment has been developed which first meets stability and time response requirements by assigning eigenvalues and eigenvector s and then provides for attainment of secondary objectives without significant deviation from the initial assignment. Finally, a computer-aided design package has been created to streamline the process of mathematical calculation and to allow users …

Analog Computer Simulation With Automatic Scaling By Digital Computer, Mark Anthony Motter

Electrical & Computer Engineering Theses & Dissertations

A computer-aided design approach for the simplification of analog computer simulation is presented. The simulation configuration consists of an EAI 2000 analog computer with serial communications link to a PDP — 11/24 digital computer. Under control of the PDP-11, the analog simulations are realized with appropriate time and magnitude scaling which adjusts the range of the simulation coefficients and prevents overloads of the analog components. The analog computer hardware configuration accommodates both stable plants up to eighth order and closed-loop systems up to tenth order. Cascade compensation is provided for the closed-loop systems.

The plant may be described by either …

Computer Aided Simulation Of A Heating, Ventilating, And Air Conditioning System In A Building, Sunil Shrikrishna Kulkarni

Mechanical & Aerospace Engineering Theses & Dissertations

The Godwin Life Science Building on the Old Dominion University campus presents an interesting problem in terms of energy conservation. The building is the maximum energy resource consumer on the campus, having a criterion value of 234 KBtu/sq.ft-year (2657 MJoules/sq. rneter-year). A Simplified Energy Analysis Method (ASEAM) loads and systems computer program was used to simulate the building and its heating, ventilating, and air conditioning (HVAC) plant in order to understand the building's high annual energy resource consumption rate, and to devise ways to overcome it. The main goal was to assess and propose energy conservation improvements to the existing …

Entry-Level Computer Aided Design And Drafting Skills, Stephen D. Rockey

Graduate Research Papers

The purposes of the study were to:

1) determine the entry-level competencies necessary for CAD system operation, and

2) rank in order of importance the competencies identified to be necessary for entry-level CAD system operators.

Computer Aided Structural Analysis: The Finite Element Method, Richard T. Ryner

Graduate Research Papers

The design process is a complex and tedious one. Within it, the task of design verification appears to require the lion's share of time, effort, and money involved.

The design formulation activity requires creative people, placed in an environment where they are able to formulate ideas which eventually become the manufactured products of an organization. This task takes up comparatively little of the time and effort of the design cycle. Therefore, it would appear that the greatest savings could be made in the design analysis task. Further, if these savings can be made earlier in the design cycle, in the …

Computer-Aided Design Of Light Aircraft To Meet Certain Aerodynamic And Structural Requirements, Joanne Lynn Walsh

Mechanical & Aerospace Engineering Theses & Dissertations

Nonlinear mathematical programming techniques are applied to a particular aircraft design problem, that of determining the maximum range design for light aircraft subject to certain aerodynamic and structural requirements. Search techniques available in an existing nonlinear optimization computer program, AESOP, are applied to the design problem. Seven design variables are used to define the wing dimensions, the wing skin thickness, the cruise velocity, the amount of fuel carried, and the engine horsepower. The influence of different design requirements on the range is observed and discussed.

Computer Solution To Inverse Problems Of Elliptic Form: V²U(X,Y) = G(A,U,X,Y), Frederick Alvin Jeter

Dissertations and Theses

One important aspect of our present age of monolithic high speed computers is the computer's capability to solve complex problems hitherto impossible to tackle due to their complexity. This paper explains how to use a. digital computer to solve a specific type of problem; specifically, to find the inverse solution of a in the elliptical equation V²U(x,y) = g(a,U,x,y), with appropriate boundary conditions. This equation is very useful in the electronics field. The knowns are the complete set of boundary values of U(x,y) and a set of observations taken on internal points of U(x,y). Given this information, plus …

Direct Design Of A Portal Frame, Angel Fajardo Ugaz

Dissertations and Theses

This investigation was undertaken to develop plastic design aids to be used in the direct design of optimum frames. It uses the concept of minimum weight of plastically designed steel frames, and the concept of linear programming to obtain general solutions. Among the special characteristics of this study are: A. The integration of both gravity and combined loading conditions into one linear programming problem. B. The application of the revised simplex method to the dual of a parametric original problem. C. The application of A and B above in the development of design aids for the optimum design of symmetrical …