Mechanical Engineering Commons^™

Programmable Vibration Table Retrofit With Eagle Medical, Jonathan Ilagan, Madhav Asok, Max Lewter

Biomedical Engineering

This project aimed to repair and upgrade a vibration table used for package testing for the sponsor, Eagle Medical - a medical packaging and sterilization company based in Paso Robles, California. The current vibration table is not programmable and lacks circuit diagrams, making it difficult to repair. In addition, it is not functional due to internal circuitry issues and power requirements. To address these issues, the team will implement several upgrades to improve the product and allow for better random cyclic vibration testing. A full assessment of the existing vibration table will be conducted to ensure the viability of these …

Damage Identification In 3d Printed Metal Parts Using Deep Learning, Romaine Byfield, Alireza Modir, Ibrahim Tansel, Raniero Plaza

Florida Conference on Recent Advances in Robotics

An active Structural Health Monitoring (SHM) method called Surface Response to Excitation (SuRE), is used in this study to detect and quantify the damages created by a milling operation on additively manufactured metal plates. This method entails bonding two piezoelectric disks to the test specimens, one to excite it with surface waves from one end of the plate, and the other to sense the dynamic response to excitation at the other end. A sweep sine wave with a duration of 1 ms, ranging from 50-120 kHz is used as the excitation signal. Five stainless steel plates of identical size (195×54×2.5 …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

The Development Of A Primer Payload With Microparticles For Uti Pathogen Identification Using Polythymidine- Modified Lamp Primers In Droplet Lamp, Jonas Otoo

KGI Theses and Dissertations

Nucleic acid amplification tests (NAATs) are among the diagnostic tests with the highest sensitivity and specificity. However, they are more complex to develop than other diagnostic tests such as biochemical tests and lateral flow immunoassay tests. Polymerase chain reaction (PCR) is the gold standard for NAATs. PCR requires thermal cycling to achieve clonal amplification of the target pathogen DNA for diagnosis. Thermal cycling poses a challenge in the development of PCR diagnostics for point-of-care (POC) settings. Loop-mediated isothermal amplification (LAMP) offers an isothermal method for NAATs diagnostics. The advancement of the microfluidics field significantly enhances the development of LAMP diagnostics …

Electromagnetically Actuated Modular Robots With Controlled Self-Assembly And On-Demand Disassembly, Anuruddha Bhattacharjee

Mechanical Engineering Research Theses and Dissertations

Modular reconfigurable robots, with on-demand assembly and disassembly, offer the possibility of mesoscale (milli- and microscale) manufacturing. However, most of the existing modular robotic platforms currently being designed and functionalized rely on complex actuation and assembly mechanisms and so lack further scalability and transformability required for mesoscale applications. Therefore, this dissertation seeks to develop a novel scalable modular robotic platform with controlled self-assembly, disassembly, and reconfiguration techniques using an external electromagnetic field. While current cutting-edge research in this area uses a single magnet to move one module at a time into the target position, this dissertation explores processes to move …

Crafting Comfort: The Design And Production Of A High-End Poolside Lounge Chair, John Hollis Tackett, Robert Griffis

Honors Theses

This report focuses on the development, design, and manufacturing of the Adjustable Lounge Chair, a high-end poolside lounge chair created to address un-met customer demand in the market. The investigation began with a market analysis to identify sought-after features not currently offered by competitors' products. This analysis drove the design of the chair, which was developed using CAD software, followed by the construction of a physical prototype to validate the concept.

The chair's innovative features include adjustable lumbar support and chair height, as well as a removable face-piece that enables users to comfortably lie prone without straining their necks. These …

The Engineering Challenges Of Designing And Manufacturing A Tensegrity Cup Stand, Yaniv Goulet, Daniel Ferro

Honors Theses

Progressing from a simple idea into a fully developed product is one of the main goals of any engineer. Through Haley Barbour Center for Manufacturing Excellence’s capstone program, the team was tasked with realizing a tensegrity cup stand. The tensegrity structure consists of a top and a bottom of some form only supporting itself by tension. The team had to research the concept, create an initial design, create a prototype of the product, improve the design after the prototype’s mistakes, apply lean principles to improve the manufacturing efficiency, and analyze all the economic impacts of the engineering decisions. In the …

Exploring Methods For Recycling Filament Waste In 3d Printing, Max Rios Carballo

Publications and Research

The goal of the current study is to investigate cutting-edge techniques for recycling filament waste from 3D printing procedures. Appropriate waste management techniques are required to reduce this trash's harmful environmental consequences. The goal of the project is to look at new methods for recycling filament waste in order to minimize disposal and encourage reuse. To acquire data from pertinent papers and research, a thorough literature review methodology was used. The findings show that this issue may be resolved utilizing a variety of recycling techniques, including shredding, melting, and re-extrusion. The type of filament waste and the intended goal will …

How Automation Is Making A Positive Impact On The Fast Food Industry, Noah Bullock

Graduate Dissertations and Theses

As the fast food industry has rapidly evolved, so has the use of technology within these businesses. Artificial intelligence is something that is being used in these fast-food restaurants to drive change. With restaurants adding artificial intelligence into their business model, many of their goals have changed. Restaurants are now having the goal of improving their speed and accuracy when it comes to order taking, enhancing the customer experience, and reducing their costs. All of which are attainable through the use of artificial intelligence. Though businesses are now using artificial intelligence; there are many concerns about the downsides that come …

In-House Processing Of Carbon Fiber Reinforced Polyetheretherketone (Cfr-Peek) 3d Printable Filaments And Fused Filament Fabrication Of Cfr-Peek Parts, Harsha Phanindra Sai Naganboyina

ETD Archive

PEEK is a high-performance polymer known for its exceptional mechanical properties, making it suitable for various applications; however, for certain demanding applications such as automotive, PEEK does not exhibit the required strength. Moreover, if the PEEK parts are developed by Fused Filament Fabrication (FFF)-based 3D Printing, there is a high chance of having PEEK parts with decreased mechanical properties. Carbon Fiber (CF) reinforcement is a well-known method of mitigating the low mechanical properties of PEEK. Hence, in the present study, we attempted to develop CF-reinforced PEEK (CFR-PEEK) parts via FFF. First, we developed homogeneous CFR-PEEK mixtures via ball milling and …

Using Immersive Technology To Improve Mechanical Design: Use Cases, A Review Of Current Technology, And An Experiment In Requirement Elicitation In Virtual Reality, William Hawthorne

All Theses

There has been a growing trend in the use of immersive technologies within engineering design. This research is focused on understanding how Virtual Reality (VR) technologies support design reviews. Modern tools including virtual reality hardware and software were tested for current capabilities and challenges. In a review of literature, two key gaps are identified: the rapid advancements of VR and AR technology and limited formal studies to determine the costs and benefits of immersive technology within engineering design reviews. This research has resulted in three key outcomes. First, use cases of immersive reality technologies are identified, through the lens of …

Engineering 3d Architected Metamaterials For Enhanced Mechanical Properties And Functionalities., Huan Jiang

Electronic Theses and Dissertations

Compared with conventional materials, architected metamaterials have shown unprecedented mechanical properties and functionalities applications. Featured with controlled introduction of porosity and different composition, architected metamaterials have demonstrated unprecedent properties not found in natural materials. Such design strategies enable researchers to tailor materials and structures with multifunctionalies and satisfy conflicting design requirements, such as high stiffness and toughness; high strength with vibration mitigation properties, etc. Furthermore, with the booming advancement of 3D printing technologies, architected materials with precisely defined complex topologies can be fabricated effortlessly, which in turn promotes the research significantly. The research objectives of this dissertation are to achieve …

Modeling, Simulation And Control Of Microrobots For The Microfactory., Zhong Yang

Electronic Theses and Dissertations

Future assembly technologies will involve higher levels of automation in order to satisfy increased microscale or nanoscale precision requirements. Traditionally, assembly using a top-down robotic approach has been well-studied and applied to the microelectronics and MEMS industries, but less so in nanotechnology. With the boom of nanotechnology since the 1990s, newly designed products with new materials, coatings, and nanoparticles are gradually entering everyone’s lives, while the industry has grown into a billion-dollar volume worldwide. Traditionally, nanotechnology products are assembled using bottom-up methods, such as self-assembly, rather than top-down robotic assembly. This is due to considerations of volume handling of large …

Structural Design And Fabrication Of A Test Chamber To Test Ppes For Effective Particle Filtration, Matthew G. Adharsingh

Honors College Theses

This research project aims to design and fabricate a test chamber for testing Personal Protective Equipment (PPE) to ensure effective particle filtration. The chamber has a special purpose, which is to measure ultrafine and submicron particles concentration in the air and test the ergonomic design of PPE based on its effective filtration. The project also considers the environmental aspects of the chamber such as the level of noise and vibration. The chamber will be designed to measure upstream and downstream particle count. Initially, the chamber was going to be made from wood, but the research team encountered difficulties in the …

The Aerocap Aerodynamic Attachment For Pickup Trucks, Andrew J. Tucker, David Silk

ATU Scholars Symposium

As the pickup truck continuously becomes more popular in both commercial and family applications, the fuel efficiency of modern pickup design should be brought into question. According to CBS News, pickup trucks accounted for around 20% of all new vehicles sold in America in 2022, with the three most popular vehicles sold during the year all being pickups. However, these vehicles consistently have higher drag coefficients than other types of vehicles, namely sedans or crossovers. This leads to decreased fuel economy and more overall greenhouse gas emissions. Even in the case of an electric pickup truck, the high drag coefficient …

Implementation Of Static Rfid Landmarks In Slam For Planogram Compliance, Brennan L. Drake

Honors College Theses

Autonomous robotic systems are becoming increasingly prevalent in everyday life and exhibit robust solutions in a wide range of applications. They face many obstacles with the foremost of which being SLAM, or Simultaneous Localization and Mapping, that encompasses both creation of the map of an unknown environment and localization of the robot in said environment. In this experiment, researchers propose the use of RFID tags in a semi-dynamic commercial environment to provide concrete landmarks for localization and mapping in pursuit of increased locational certainty. With this obtained, the ultimate goal of the research is to construct a robotics platform for …

How Automation Is Making A Positive Impact On The Fast Food Industry, Noah Bullock

Undergraduate Theses and Capstone Projects

As the fast food industry has rapidly evolved, so has the use of technology within these businesses. Artificial intelligence is something that is being used in these fast-food restaurants to drive change. With restaurants adding artificial intelligence into their business model, many of their goals have changed. Restaurants are now having the goal of improving their speed and accuracy when it comes to order taking, enhancing the customer experience, and reducing their costs. All of which are attainable through the use of artificial intelligence. Though businesses are now using artificial intelligence; there are many concerns about the downsides that come …

Simulating Steam Jets Due To Rapid Plate Tectonics: A Computational Fluid Dynamics Analysis, Emilie Hatton

Senior Honors Theses

According to the Bible's account of earth's physical history, the majority of geological change from creation to the Ice Age is a consequence of the global Flood cataclysm described in Genesis 6-8. The changes included large-scale tectonic activity, recycling all pre-Flood ocean floor into the mantle, and generating all present-day igneous ocean floor by seafloor spreading at mid-ocean rift zones. Along the middle of these zones, strips of newly formed seafloor were present near the melting temperature of basaltic magma. Above these strips of extremely hot rock, intense jets of steam would almost certainly form. This research seeks to investigate …

Creativity, Craftsmanship, And Connection: Large-Format Sculpture Design, Jacqueline L. Puga, Gordon Hoople

The Transdisciplinary STEAM+ Journal

Artistry is a concept that is not usually explored in engineering yet is an invaluable skill that touches everything from product design to systems thinking. This past summer I developed conceptual designs for a large format sculpture that required connecting engineering knowledge with artistic vision. The initial phase required constant inspiration and creativity. The first step was to look at previous sculptures showcased throughout the world, such as at venues like “Burning Man,” to understand the possibilities or limitations of the space provided. Sketching varied and numerous ideas was essential in our design process. Next, we took our favorite ideas …

Session 2: The Effect Of Boom Leveling On Spray Dispersion, Travis A. Burgers, Miguel Bustamante, Juan F. Vivanco

SDSU Data Science Symposium

Self-propelled sprayers are commonly used in agriculture to disperse agrichemicals. These sprayers commonly have two boom wings with dozens of nozzles that disperse the chemicals. Automatic boom height systems reduce the variability of agricultural sprayer boom height, which is important to reduce uneven spray dispersion if the boom is not at the target height.

A computational model was created to simulate the spray dispersion under the following conditions: a) one stationary nozzle based on the measured spray pattern from one nozzle, b) one stationary model due to an angled boom, c) superposition of multiple stationary nozzles due an angled boom, …

Launching A 3d Printing Program For Students: Recommendations And Best Practices For Libraries, Wilhelmina Randtke, Lee Bareford

Georgia Library Quarterly

The Georgia Southern University Libraries launched a 3D printing program for students in July 2022. Prior to launch, library employees at two of Georgia Southern University’s campuses investigated options for implementing safe, affordable, and sustainable 3D printing in existing academic libraries without retrofitting costly ventilation systems into existing facilities. This article describes the reasons why the Georgia Southern University Libraries thought that a 3D printing program could fulfill a service need for students across university colleges and departments and outlines some of the challenges, best practices, and unique innovations that the library’s employees experienced throughout the program launch process. The …

Rc Baja Project: Suspension And Steering, Chance Hills

All Undergraduate Projects

Students designed and manufactured an RC Baja car to compete in the ASME RC Baja competition. The goal of this section of the project was to create a steering system and suspension system that work together properly with a partner’s chassis/drive train systems during tests and competitions. The car needed to be able to complete in the three events, which are a drag race, a solemn course, and the Baja event. The RC will also be evaluated on the ability to climb inclines, top speed, and withstand the drop test. This proposal will explain all the details and effort that …

Design And Fabrication Of A Force-Displacement Control Mechanism For Bone-Surgical Tool Testing, Kenneth Nwagu

College of Graduate Studies: Theses & Dissertations

This project focuses on the design and fabrication of an experimental setup for orthopedic-tool testing, tailored for a surgical instrumentation company. The multifaceted project encompasses a literature review, conceptual design, prototyping, and rigorous testing, resulting in a versatile control system capable of assessing various orthopedic tools, including bone drills, saws, burrs, and power handpieces.

Orthopedic surgical procedures (which include cutting and/or drilling into bone) often need to be performed on bones for faster recovery. The drilling and cutting process can cause an increase in temperature at the cutting site which can cause bone necrosis. The tools also need to be …

Full Body Harness Design Modifications And Evaluation: A Senior Design Project, Martin Mead, Jordan Von Seggern

The Journal of Undergraduate Research

Full-body harness (FBH) is critical for the safe operation of industrial and recreational activities, from installing and maintaining infrastructure such as wind turbines to ziplining and mountaintop adventures. However, harness design remains in the proprietary information of companies with limited technical information available for improvements or readjustments to specialized applications. As the outcome of the Capstone project, the paper focuses on multiple technical aspects and the engineering processes for designing FBH for ziplining recreational users, from selecting and testing materials for operation in cold weather to improvements in design and manufacturing for user comfort. The project is guided by technical …

An Experimentally Validated Computational Model For The Degradation And Fracture Of Magnesium-Based Implants In A Chemically Corrosive Environment, Mark M. Ousdigian

Dissertations, Master's Theses and Master's Reports

In the orthopedic and cardiovascular fields there is a growing interest for biodegradable implants, which can be naturally degraded in the body environment over time so that no extraction surgery is required. These implants must be designed to maintain their strength until the fracture has healed in the body, which could be influenced by many factors such as -the patient’s age, activities, body weight, pre-existing conditions etc. Hence, an ideal implant design should be done on a patient-by-patient basis. In the present work, a computational model is developed to predict the degradation and fracture of magnesium-based implants in a stress-coupled …

Anisotropic Material Behavior Of 3d Printed Fiber Composites, Jordan Garcia

Theses and Dissertations--Mechanical and Aerospace Engineering

Literature has shown that 3D printed composites may have highly anisotropic mechanical properties due to variation in microstructure as a result of filament deposition process. Laminate composite theory, which is already used for composite products, has been proposed as an effective method for quantifying these mechanical characteristics. Starting with the analysis of comparing the printing orientation of premanufactured carbon fiber reinforced filament, the mechanical properties of 3D printed objects were examined. The mechanical properties changed not only as a result of machine choice, but how the sample is oriented along the printing bed. The analysis continued with looking at the …

A Computational Fluid Dynamic Analysis Of Oxyacetylene Combustion Flow For Use In Material Response Boundary Conditions, Craig Meade

Theses and Dissertations--Mechanical and Aerospace Engineering

Oxyacetylene torches are used in the aerospace industry and research to test thermal protection system materials (TPS) due to their high flame temperatures and high heat flux capabilities. The purpose of this work is to determine a combustion model to accurately simulate the high temperature flow of an oxyacetylene torch. The flow conditions around a sample material can then be used as boundary conditions when modeling TPS material response. Two separate combustion models with equilibrium chemistry were investigated using ANSYS Fluent™; the Eddy-Dissipation Model, and the Partially Premixed model.The results of this study are compared to existing experiments for validation.

Mechanical Design Of A Microwave Imaging Device For Breast Cancer Detection In Mri Scanners, Grace M. Player

Dartmouth College Master’s Theses

This project seeks to develop an updated version of a microwave imaging device for use in conjunction with breast MRI, improving upon existing technology and developing novel concepts for the device. It posits three primary redesign targets for updating the previous system: resizing the system height, making the device more iteration- friendly, and improving the overall manufacturability of the device by replacing custom components with commercially available alternatives. All three of these redesign targets are met in the new design, V2.0. The height is reduced by reducing antenna travel and height, embedding some components, and shortening the tank wall, resulting …

Design And Manufacture Of An Aerodynamic Body That Meets Scaling Law Requirements And Survives Severe G-Load Environment For Free-Flight Testing, Anthony R. Gonzalez

Graduate Theses, Dissertations, and Problem Reports (ETD)

Design and Manufacture of an Aerodynamic Body that Meets Scaling Law Requirements and Survives Severe G-load Environment for Free-Flight Testing

Anthony Gonzalez

Developing scale models to test functionality and ascertain aerodynamic properties is critical before manufacturing full-size products. Through dimensional analysis and similitude, engineers create scale models to test any parameter of interest. This research aims to design a scale model of an aerodynamic body for repeated free-flight testing. The Froude number is the dominant scale model law used to determine the geometric, mass, and inertia scaling laws. A critical requirement for this research is that the model should be …

Finite Element Modeling And Analysis Of Breech Face Impressions, James A. Hamilton

Graduate Theses, Dissertations, and Problem Reports (ETD)

Finite element analysis (FEA) is a technique which has not been widely used in Forensic Science in general and firearms examination in particular. The general utility of FEA was assessed by the simulation of scenarios commonly encountered during the investigation of firearm related crimes. As a test, simulations included the perforation of a windshield and sheet metal with a 9 mm projectile, the development of pseudo subclass characteristics during the manufacturing of a breech face, and the impact of a projectile with another projectile in air and with a solid body. Results from the simulations were compared to projectiles and …