Mechanical Engineering Commons^™

Preparation Of Radioactive Gold Nanoparticle By Neutron Activation, Rohadi Awaludin

Makara Journal of Technology

Preparation of Radioactive Gold Nanoparticle by Neutron Activation. It was reported that gold nanoparticle could be used for cancer therapy using thermal effect. It is possible to kill cancer cells using radiation of radioisotope. Study on preparation of radioactive gold by neutron activation at central irradiation position (CIP) of G.A. Siwabessy reactor with neutron flux 1.26 x 1014 neutron s-1cm-2 has been carried out. It was revealed that a radioisotop of gold (198Au) was produced by neutron activation from natural gold. Calculation results showed that 198Au with radioactivity of 0.366 Bq, 2.93 Bq, 9.90 Bq and 23.4 Bq was produced …

Implementation Of Web Cam As Motion Detector With Directshow Interfacing, Yonatan Santoso, Iwan Setiyawan, Victor N. Papilaya

Makara Journal of Technology

Implementation of Web Cam as Motion Detector with DirectShow Interfacing. One of many ways to take control a web cam is by using DirectShow which is integrated in DirectX. DirectShow acts like an API therefore it is easier to use. Afterwards, web cam will be implemented to detect object’s motion as well as camera surveillance. The method is by comparing a reference image with other image which is taken lately. If there are differences between those image it means motion has been detected.

Thermal Stability Of Clay's Galleries In Polypropylene - Clay (Montmorillonite) Nanocomposites Using Polypropylene-Gmaleic Anhydride As Compatibilizer, Sotya Astutiningsih, Pandu Lanang Kinasih, Arief Cahyo Wibowo

Makara Journal of Technology

Thermal Stability of Clay's Galleries in Polypropylene - Clay (montmorillonite) Nanocomposites using Polypropylene-g- Maleic Anhydride as Compatibilizer. Superior properties of food packaging can be achieved using nanocomposite technology. However, fabrication of this materials are complex and expensive. Long term objectives of this research is the synthesis of low cost polypropylene clay nanocomposites (PPCN) via a short-cut method known as ‘cascade engineering’. Cascade engineering principle in PPCN fabrication is performed by using compatibilizer (to enable the mixing of PP and clay) masterbatch, and PPCN in one pot process using melt mixer. This paper present the experimental results using small-angle x-ray diffraction …

Induction And Conduction Electromagnetic Waves Caused By Lightning Strike On The Low Voltage Network, Reynaldo Zoro

Makara Journal of Technology

Induction and Conduction Electromagnetic Waves Caused by Lightning Strike on the Low Voltage Network. Direct and indirect lightning strikes can disturb and induce low voltage overheadlines and it can produced overvoltage due to traveling waves along the lines. This overvoltage can damage the equipments connected to it. It was recorded that there were already a lot of damages of electronic equipments and arrestesr located inside the building of Lightning Measurement Station at Mnt. Tangkuban Perahu. Most of the overvoltage which was developed on the low voltage lines were coming from indirect lightning strike nearby due to the fact that most …

Muara Bekasi – Muara Tawar Offshore Transmission Pipeline Routing And Economic Analysis., Asep Handaya Saputra, Ardiansyah Ardiansyah

Makara Journal of Technology

Muara Bekasi – Muara Tawar Offshore Transmission Pipeline Routing and Economic Analysis. Power plant Muara Tawar will substitute the need of oil fuel to gas as form of economizing and energy conservation. The nearest supply point to fulfill natural gas needed on Muara Bekasi. So that Power Plant Company needed to develop gas pipeline infrastructure to joining the point.The purpose of this study is to create a system of gas transmission pipeline from gas supply point at Muara Bekasi to Power Plant Muara Tawar trough to offshore area. Design of gas transmission pipeline is started with technical data collection and …

Temperature Influence And Heat Management Requirements Of Microalgae Cultivation In Photobioreactors, Thomas Hagen Mehlitz

Master's Theses

Microalgae are considered one of the most promising feedstocks for biofuel production for the future. The most efficient way to produce vast amounts of algal biomass is the use of closed tubular photobioreactors (PBR). The heat requirement for a given system is a major concern since the best algae growth rates are obtained between 25-30 °C, depending on the specific strain. A procedure to determine temperature influence on algal growth rates was developed for a lab-scale PBR system using the species Chlorella. A maximum growth rate of 1.44 doublings per day at 29 °C (optimal temperature) was determined. In addition, …

Heat Transfer Correlations For Low Approach Evaporative Cooling Systems In Buildings, Ben Costelloe, Donal Finn

Articles

The experimental performance of an open industrial scale cooling tower, utilising small approach temperature differences (1–3 K), for rejection of heat at the low water temperatures (11–20 °C) typical of chilled ceilings and other sensible air–water heat dissipation systems in buildings, is examined. The study was carried out under temperate maritime climatic conditions (3–18 °C wet-bulb temperature range). Initially a theoretical analysis of the process at typical conditions for this climate was conducted, which indicated that a water to air (L/G) mass flow rate ratio of less than 1.0 was required for effective operation. Consequently for these low L/G ratios, …

Mitigation Of Impact Vibrations Using Impedance Mismatch In Cylindrical Structures, Sachiko Sueki

UNLV Theses, Dissertations, Professional Papers, and Capstones

The focus of this work is to study the phenomenon of material impedance mismatch to determine its effect on the mitigation of high frequency accelerations in projectile and long bar structures within linear ranges of materials. In this study, the acceleration responses of structures with various materials and material combinations were studied experimentally, numerically and by the Finite Element Analysis (FEA). Air-gun tests conducted by the US Army Research Laboratory were modeled using FEA to simulate the acceleration pulse and shock waves experienced by artillery components during a launch. After the prototype of projectile was selected, further studies were conducted …

An H-Adaptive Finite-Element Technique For Constructing 3d Wind Fields, Darrell Pepper, Xiuling Wang

Mechanical Engineering Faculty Research

An h-adaptive, mass-consistent finite-element model (FEM) has been developed for constructing 3D wind fields over irregular terrain utilizing sparse meteorological tower data. The element size in the computational domain is dynamically controlled by an a posteriori error estimator based on the L2 norm. In the h-adaptive FEM algorithm, large element sizes are typically associated with smooth flow regions and small errors; small element sizes are attributed to fast-changing flow regions and large errors. The adaptive procedure employed in this model uses mesh refinement–unrefinement to satisfy error criteria. Results are presented for wind fields using sparse data obtained from two regions …

2008 Fall Engr333 Project Final Report, 2008 Fall Engr333

ENGR 333

The Calvin College Engineering 333 class of 2008 was challenged with the question, “What would it take to implement an energy efficiency fund at Calvin?” Before addressing this question, another had to be asked: “What is an energy efficiency fund?” An energy efficiency fund is a revolving fund which takes seed money from donations, tuition, or grants and invests it into projects that save energy. Energy cost savings from the projects are routed back to the fund to help it grow and enable it to finance future projects. In order to begin this, the senior engineering students began organizing and …

Detection Of Voids In Prestressed Concrete Bridges Using Thermal Imaging And Ground-Penetrating Radar, David G. Pollock, Kenneth J. Dupuis, Benjamin Lacour, Karl R. Olsen

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Thermal imaging and ground-penetrating radar was conducted on concrete specimens with simulated air voids. For the thermal imaging inspections, six concrete specimens were constructed during the month of June 2007 to simulate the walls of post-tensioned box girder bridges. The objective was to detect simulated air voids within grouted post-tensioning ducts, thus locating areas where the post-tensioning steel strands are vulnerable to corrosion. The most important deduction taken from these inspections was that PT-ducts and simulated voids were more detectable in the 20 cm (8 in.) thick specimens than in the 30 cm (12 in.) thick specimens. While inspections of …

Development Of A Mathematical Model For 3d Reconstruction Of Target Objects By Photogrammetry, Keith F. Blonquist

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis outlines the development of a mathematical model which can be used to perform 3D reconstruction of a target object from surveillance images. 3D reconstruction is a common procedure in photogrammetry, but performing 3D reconstruction from surveillance images can be more difficult than typical photogrammetry applications.

Surveillance images are generally captured in an unsystematic manner because there is no control over the target that is being photographed. Surveillance images can have a wide variety of fields of view, are often captured with uncalibrated cameras, and typically the targets are objects for which there is no other a priori information. …

Isolation Of Methyl Laurate From Coconut Oil As Raw Material For Fatty Alcohol Sulfate, Rita Arbianti, Tania Surya Utami, Astri Nugroho

Makara Journal of Technology

Isolation of Methyl Laurate from Coconut Oil as Raw Material for Fatty Alcohol Sulfate. Methyl laurate is a raw or base material for many industries, including surfactant industries. In this research, coconut oil (VCO) is transesterified with methanol to produce methyl ester, using NaOH as the catalyst. Methyl laurate is then separated by method based on the difference in melting point. This research focuses at determining the effects of some variables in transesterification on the concentration of produced methyl laurate. The variables are temperature (40 oC, 50 oC, 60 oC, 80 oC), time of transesterification reaction (0,5 hour, 1 hour, …

The Decompositioning Of Volatile-Matter Of Tanjung Enim Coal By Using Thermogravimetry Analyzer (Tga), Nukman Nukman

Makara Journal of Technology

The Decompositioning of Volatile-Matter of Tanjung Enim Coal by using Thermogravimetry Analyzer (TGA). Coal is a nature material which a kind of energy source. The decompotition of coal could analyze by heat treated using thermogravimetry analyzer. The decomposition of the volatile matter for three kinds of Tanjung Enim coal could be known. The value of activation energy that be found diference, then for Semi Anthracite, Bitumonius and Sub Bituminous Coal, the initial temperatures are 60.8 oC, 70.7 oC, 97.8oC, and the last temperatures are 893.8 oC, 832 oC, 584.6oC.

Phase Unwrapping Insar Image Using Local Energy Minimization Approach, Kusworo Adi, Tati L.R. Mengko, Andriyan B. Suksmono, Hendra Gunawan

Makara Journal of Technology

Phase Unwrapping InSAR Image Using Local Energy Minimization Approach. Reconstruction process of phase data from its cover is called Phase Unwrapping (PU). Ideally, without any noise phrase, singularity, and aliasing problems, the phase information can be unwrapped easily. However, in fact, the phase data actually always get noise disturbance and discontinuity. The PU process becomes more complicated and needs a better PU algorithm to address the problems properly. In this research, the local PU algorithm is developed using minimization of close related firstorder pixels energy approach. In this method, the energy difference between four close related pixels is counted, followed …

Two Element Microstrip Antenna Array With Defected Ground Structure, Fitri Yuli Zulkifli, Eko Tjipto Rahardjo, Muhamad Asvial, Djoko Hartanto

Makara Journal of Technology

Two Element Microstrip Antenna Array with Defected Ground Structure. This paper presents a two element microstrip antenna array using trapezium shape defected ground structure (DGS). The DGS is inserted in the ground plane between two elements of antenna array. Insertion of the DGS is intended to suppress the mutual coupling effect produced by antenna array. Simulation and measurement results were taken and compared between antenna array with and without DGS. Measurement results show that the antenna with DGS compared to antenna without DGS can suppress mutual coupling effect to 7.9 dB, improve the return loss to 33.29% from -30.188 dB …

Neutron Irradiation On Ss316 Material For Radioactive Endovascular Stent Production, Rohadi Awaludin, Abidin Abidin, Sriyono Sriyono

Makara Journal of Technology

Neutron Irradiation on SS316 Material for Radioactive Endovascular Stent Production. It was reported that restenosis could be prevented by radioactive endovascular stent. SS316 material of endovascular stent has been irradiated at pneumatic rabbit system of G.A. Siwabessy reactor for 5 minutes for producing radioactive stent by neutron activation. After 10 days of decay, the irradiated SS316 was measured by gamma spectrometer. The radioisotopes of 51Cr, 59Fe and 60Co were detected in the irradiated SS316 with radioactivity of 5990, 107 and 109 Bq/mg respectively. The Calculation results showed that radioisotopes of 51Cr, 59Fe and 55Fe were produced by neutron activation. The …

Physical Characteristics And Utilization Oft The Karst Beaches In Kabupaten Gunungkidul, Astrid Damayanti, Ranum Ayuningtyas

Makara Journal of Technology

Physical Characteristics and Utilization oft the Karst Beaches in Kabupaten Gunungkidul. Karsts beaches at Gunungkidul Regency (Baron, Kukup, Sepanjang, Drini, Krakal, Ngandong, and Sundak), located in south of Daerah Istimewa Yogyakarta Province, have economic potential. Even they have similarity in geological condition (genesis and morphological processes), but they have different physical characteristics. Based on result of observation environment on morphological conditions and spatial analysis method, we found the proper utilization of the beaches.

Hydrogen Absorption In Weldments Of Overlaid Claded Pressure Vessel, Ronnie Higuchi Rusli

Makara Journal of Technology

Cracks was found in type 347 stainless steel internal attachment welds of a reactor for a high temperature, and high pressure hydrogen service. One of the possible causes of cracking is low cycle fatigue cracking induced by repetition of thermal stress to embrittled weld metal. Type 347 weld metal loses its ductility by presence of sigma phase and hydrogen.

Spectral Response Surfaces And The Ringing Response Of Offshore Structures, I Ketut Suastika

Makara Journal of Technology

A method, called spectral response surface method, is proposed for the study of the ringing phenomenon of offshore structures. Newman’s results for diffraction force on a column were reformulated in terms of the frequency components of the ocean surface and their Hilbert transforms. Using a first-order reliability method together with a dynamic model for the structural response, it is straightforward to calculate the ocean surface history most likely to generate an extreme ringing response and the ringing response history.

Ole Miss Engineer 2008

Ole Miss Engineer

No abstract provided.

2008 Fall Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Fall 2008 semester ENGR333 project assessed the feasibility of a Green Revolving Fund for Calvin College. I asked the students “What would it take to implement a Calvin Energy Efficiency Fund (CEEF)?”

The project emerged from the work of the previous year’s students who uncovered the concept of green revolving funds.

Immediately after the Fall 2008 semester, I went on sabbatical to South Africa for all of 2009. While I was away, the Calvin administration established the Calvin Energy Recovery Fund (CERF). Over the next decade, CERF saved hundreds of thousands of dollars in energy costs and was …

Reliability Analysis Of Plank Decks, Andrzej S. Nowak, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

The objective of this study is to summarize the load and resistance criteria for highway bridge plank decks, and to estimate the reliability of plank decks designed by AASHTO Code. Both transverse and longitudinal planks for a variety of typical stringer spacings and plank sizes are considered. Truck traffic load data is based on the model used to calibrate the 1994 AASHTO LRFD Code. However, for plank decks, wheel load rather than whole vehicle weight is most important, and these statistics are developed for this study. For wood planks, dead load and dynamic load are not significant. The limit state …

Development Of A Particle Flow Test For Rotational Molding, Russell B. Whatcott

Theses and Dissertations

One of the current testing method (the Dry Flow test) to qualify resin for use in production in the rotomolding process has been shown to have many flaws in both equipment and procedure. Research was done here to investigate a possible alternative that could eliminate some of these testing deficiencies. By reducing equipment and operator errors, the testing of materials becomes more valuable of an exercise. The Angular Flow test developed in this research can increase repeatability. By coming to understand the rotational molding process better, an evaluation that can give more valid information was devised.

College Of Engineering Senior Design Competition Spring 2008, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

Ole Miss Engineer 2008

Ole Miss Engineer

No abstract provided.

A Study Of Co2 Absorption Using Jet Bubble Column, Setiadi Setiadi, Nita Tania Hadiyani, Hantizen Hantizen, Dijan Supramono

Makara Journal of Technology

A Study of CO2 Absorption Using Jet Bubble Column. The phenomenon of plunging jet gas-liquid contact occurs quite often in nature, it's momentum carries small air bubbles with it into the reactor medium. The momentum of the liquid stream can be sufficient to carry small bubbles completely to the bottom of the vessel. A stream of liquid falling toward a level surface of that liquid will pull the surrounding air along with it. It will indent the surface of the liquid to form a trumpet-like shape. If the velocity of the stream is high enough, air bubbles will be pulled …

The Development Of Inverter Fuzzy Logic Control For Induction Motor Control By Vector Control Method In Electric Vehicle, Era Purwanto, Mohammad Ashary, Subagio Subagio, Mauridhi Heri Purnomo

Makara Journal of Technology

The development of Inverter Fuzzy Logic Control for Induction Motor Control by Vector Control Method in Electric Vehicle. In response to concerns about energy cost, energy dependence, and environmental damage, a rekindling of interest in electric vehicles (EV’s) has been obvious. Thus, the development of power electronics technology for EV’s will take an accelerated pace to fulfill the market needs, regarding with the problem in this paper is presented development of fuzzy logic inverter in induction motor control for electric vehicle propulsion. The Fuzzy logic inverter is developed in this system to directed toward developing an improved propulsion system for …

Internet Congestion Control System, Pranoto Hidaya Rusmin, Carmadi Machbub, Agung Harsoyo, Hendrawan Hendrawan

Makara Journal of Technology

Internet Congestion Control System. Internet congestion occurs when resource demands exceeds the network capacity. But, it is not the only reason. Congestion can happen on some users because some others user has higher sending rate. Then some users with lower sending rate will experience congestion. This partial congestion is caused by inexactly feedback. At this moment congestion are solved by the involvement of two controlling mechanisms. These mechanisms are flow/congestion control in the TCP source and Active Queue Management (AQM) in the router. AQM will provide feedback to the source a kind of indication for the occurrence of the congestion …

Substrates Preparation From Woody Tropical Waste Biomass For Biohydrogen Production, Dwi Susilaningsih, Theresia Umi Harwati, Khairul Anam, Yopi Yopi

Makara Journal of Technology

Substrates Preparation from Woody Tropical Waste Biomass for Biohydrogen Production. Addressing to the global warming problem, energy crisis and pollution, hydrogen production by micro-organisms using biotechnological approach should be considered, since it fulfils the recent society requirement to safely produce, renewable and environmental friendly energy. Hydrogen is one of the most promising green energy sources, because it is easily converted to electricity and cleanly combustible. There are three types of micro-organisms for hydrogen production, the first is cyanobacteria through the photosynthesis process, the second is anaerobic bacteria, which use organic substances as electron donor and energy and convert them to …