Mechanical Engineering Commons^™

Thermo-Rheological And Tribological Properties Of Low- And High-Oleic Vegetable Oils As Sustainable Bio-Based Lubricants, Abiodun Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Vegetable oil-based lubricants have attracted increased research attention in recent decades as sustainable alternatives to conventional petroleum-based lubricants in metal machining. However, more studies are required to fully elucidate the thermo-rheological and tribological properties. This study presents an investigation of the thermo-rheological and tribological properties of different vegetable oils, including low- and high-oleic soybean oil, high-oleic sunflower, safflower, and canola oils. The lubricity, and evolution of viscosity and thermodynamic properties as a function of temperature were investigated to obtain important parameters including the viscosity index, flow behavior index, flow activation energy, specific heat capacity, thermal conductivity, coefficient of friction, contact …

Fluid Pathways For Enhanced Mass Transfer In The Micro Regime: Applications In Novel Pumpless Redox Flow Cell And Zinc Finger Protein-Based Dna Detection, Shaikh Al Mahmud Bhuiyan

Theses and Dissertations--Mechanical and Aerospace Engineering

Precise fluid transport through microscale geometries can help optimize electrochemical and biochemical processes by maximizing the mass transfer rate of reactants. By introducing intricate structural features inside microchannels, it is possible to manipulate the fluid motion and direct the flow towards any surface of interest. In this study, we have demonstrated that rationally designed fluid pathways can improve the performance of electrochemical and biochemical systems.

The emergence of additive manufacturing has enabled rapid fabrication of robust structures with intricate features to guide fluid motion. However, their application in nonaqueous electrochemical systems has been limited due to their interaction with organic …

Microwave-Assisted Reduction Of Critical Metal Oxides From E-Waste Mixture, Kurundu Shavinka Jayasekera

Graduate Theses, Dissertations, and Problem Reports (ETD)

The efficient recovery of critical metals such as tantalum (Ta), manganese (Mn), gallium (Ga), and indium (In) from electronic waste (e-waste) is essential for resource sustainability and environmental protection. This research uses microwave-assisted treatment to investigate the carbothermal reduction of these four specific metals from their oxides in a simulated e-waste mixture, with carbon black serving as both a microwave coupling and reduction agent. Microwave processing is used specifically because it offers a rapid and energy-efficient alternative to conventional thermal methods, with the benefits of intrinsic heating and selective heating of materials. The first experiments centered on understanding the effects …

Ground Testing Of A Magnetic-Electrostatic Separation System For Lunar Regolith Beneficiation, Peter Bachle, Charles Wood, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

The separation of lunar regolith by mineral composition and size category is useful forin-situ resource utilization (ISRU). The research presented herein discusses the designing and development of equipment that has the potential to separate lunar regolith into aluminum, iron-titanium, and magnesium-iron ores. Along with the metal ore separation, this equipment shows the potential to separate regolith by size categories. The combined effect of these separation methods generates output that is valuable to subsequent use in metal and oxygen extraction, additive manufacturing, and regolith sintering processes. The designed equipment uses a dual-strength magnet system with N42 and N52 neodymium magnets for …

Numerical Modelling And Co-Optimization Of Gasoline Fuels For Gasoline Compression Ignition Using Multi Component Approach, Ashwin Karthik Purushothaman

Dissertations, Master's Theses and Master's Reports

Future mobility is expected to rely on a broad spectrum of powertrain technologies, including battery electric vehicles (BEVs), hybrid electric vehicles (HEVs), fuel cell electric vehicles (FCEVs) and traditional internal combustion engine (ICE) vehicles. Despite the shift toward electrification, internal combustion engines are projected to remain a key component of future powertrains, either as the primary power source or as range extenders to generate electricity in hybrid systems. As such, significant research efforts continue to focus on enhancing the efficiency and reducing the emissions of ICEs to meet increasingly stringent regulatory and environmental targets. Gasoline compression ignition (GCI) has been …

Gas-Generating Reactive Materials: Design, Evaluation And Effect Of Morphology On Their Ignition And Combustion, Purvam Mehulkumar Gandhi

Dissertations

This work investigates optimizing gas-generating reactive materials, focusing on particle morphology's effect on ignition and combustion behavior. Metal-based gas-generating energetic materials (EMs) are promising alternatives to replace traditional CHNO compounds. Design of advanced metal-based EMs requires consistent ways of evaluating how their characteristics affect their ignition and combustion. Many relevant evaluation approaches exist; however, the results may be difficult to compare directly across different studies. Commonly, experimentalists ignite metal-based EMs in enclosed chambers and report pressures, P. However, direct comparison of these pressures is hindered by variations in the chamber volume, V, and the EM mass, m. To standardize the …

Effect Of Alkyd And Polyester Resin Compositions On Corrosion Resistance, Blistering, And Adhesion In Utilization Of Oily Sludge As Anti-Rust Coating Material, Gerets Land Kakalang, Yohanes David Kristianto, Johny Wahyuadi Mudaryoto

Journal of Materials Exploration and Findings

Oil sludge is a waste derived from upstream and downstream activities of the oil and gas industry which is estimated at 10,000 tonnes generated from all PERTAMINA downstream activities spread across various fields, processing units and depots throughout Indonesia. Oil sludge has the same characteristics as asphalt, where asphalt in previous studies can be used as an anti-rust coating, so that the handling of oily sludge can be topped up by reusing and having its own added value. The purpose of this research is to utilise waste oily sludge as an alternative anti-rust coating material and compare alkyd resin and …

Capacity Of Self Compact Concrete Walls Using Attapulgite As A Partial Replacement Of Cement Under One Way And Two Way Action Restriction, Wissam Kadhim Alsaraj, Luma Abdul Ghani Zghair, Akhlas Hashem Mohammed

Al-Esraa University College Journal for Engineering Sciences

This investigation about the structural performance of sustainable self-compact concrete walls exposed to eccentric axial regularly dispersed loading, including the effect of aspect ratio (AR) and slenderness ratio (λ) by one-way and two-way action. The experimental program includes testing ten wall panels, the eccentricity of the loading system equivalent to one-sixth of depth. These wall panels are separated into four groups, each one consisting of three specimens. first and second groups clarify the aspect ratio (H/L) effect. The results indicated for decreasing AR from (0.75 to 0.625), (0.625 to 0.5), and (0.75 to 0.5), the increase of final load is …

Exploring The Benefits Of Feature Selection Based On Bat Algorithm And Deep Learning In Brain Cancer Diagnosis, Noor Fawzi Shafiq

Al-Esraa University College Journal for Engineering Sciences

Brain cancer is considered one of the most dangerous types that must be treated as soon as possible. Therefore, it is necessary to detect brain cancer in its early stages to enhance the diagnosis of the condition. This study proposes to combine the bat algorithm (BA) with deep learning methods to identify and classify brain tumors in medical images accurately.

In this paper, the bat algorithm was used to select distinctive features from the input brain images. The Bat Algorithm (BA) is a metaheuristic optimization algorithm that mimics the echolocation behavior of bats. It efficiently explores the feature space to …

Unveiling The Hidden Threat: How Wireless Networks Fuel Serious Cyber Attacks, Ibtesam Jomaa Hawi

Al-Esraa University College Journal for Engineering Sciences

The spread of wireless networks has led to an increase in serious cyber attacks due to their weak architecture. This article focuses on reevaluating cybersecurity in wireless network technology by integrating statistical information detection methods and artificial intelligence (AI) algorithms. To construct a wireless networking scenario that accurately reflects real-life conditions, we created a data fabrication that included four pre-existing anomalies as well as four newly introduced anomalies. The synthetic dataset created from these generation processes contains 20 thousand distinguishable values, which are later divided into training and validation sets. Using the strategy described before, we began to analyze the …

A Study On Improving The Accuracy And Effectiveness Of Similarity Detection Processes In Text Files Using Nlp Techniques, Noor Abdulmuttaleb Jaafar

Al-Esraa University College Journal for Engineering Sciences

The rapid expansion of the Internet has revolutionized access to information, especially in the area of unstructured data, most of which consists of textual content. While instant access to information brings many advantages, it has also given rise to a prevalent problem – plagiarism. Copying and reusing materials without proper permission poses a significant threat to academic integrity and integrity. Rates of plagiarism, especially in academic and scientific publications, have risen with the advent of the Internet, reaching alarming levels, such as 60% in student projects. This study examines the proposed model that includes computation of similarity using cosine coefficients, …

An Intelligent System Using Deep Learning For Healthcare Monitoring In Light Of The Covid-19 And Future Pandemics Based On Iot, Sara Salman Qasim, Rajaa J. Khanjar, Jamal Nasir Hasoon, Baesher Abdullateff Abad, Ali Hussein Fadil, Shajan.M. Alsowaidi

Al-Esraa University College Journal for Engineering Sciences

Recently, the Internet of Things has become a compelling research field as a new topic of research in various disciplines, particularly in the field of healthcare, because the Internet of Things is rebuilding modern healthcare systems by integrating technology, economics, and social perspectives. The development of healthcare systems from traditional to more personalized systems in which patients can be easily diagnosed, monitored and treated and many people can be helped. People are treated and cared for remotely and this is what some people need in the crisis the world has been through like COVID-19. This epidemic is caused by the …

Speech Coding Based On A Hybrid Approach: Dct, Huffman And Run-Length Coding, Sundos Abdulameer Alazawi, Esraa Jaffar Baker, Shahbaa Mohammed Abdulmaged

Al-Esraa University College Journal for Engineering Sciences

The exponential expansion of data in the digital world necessitates the development of effective methods for data transmission and storage. Data compression (DC) strategies are suggested to reduce the quantity of data stored or conveyed due to constrained resources. As a result of DC ideas' ability to efficiently use existing storage space and transmission capacity, different methods have been developed in various areas. Speech coding is a lossy method of coding; therefore, the output signal differs slightly from the input signal. Speech coding is useful for message encryption, communication over long distances and speech quality. In the fields of digital …

The Evolution Of The University Of Al-Anbar Urban Planning Based On The Mental Picture's Diversity And The Contemporary Planning Spaces Filling, Ali Abdulsamea Hameed

Al-Esraa University College Journal for Engineering Sciences

This research concentrated on the role of environmental graphic design (EGD) and the place-making idea in the interior environment of Al-Anbar University. To develop an identity being visual for the University of Al-Anbar internal environment (IE) is this goal of project. The search sought to create and enhance the shape of the internal University of Al-Anbar vacuum by reviving the idea of place building. In order to build and filling the internal emptiness of the campus, the identity being visual must also be strengthened. The descriptive analytical approach was chosen since it was best suited to achieve the goal of …

Optimization Of Tps Films Using An Adaptive Design Of Experiments Approach In A Bayesian Optimization Framework, Theresa Marks, Gracie White, Scott Lohman, Mayank Malhotra

The Journal of Purdue Undergraduate Research

Plastic pollution, amounting to 12 million tons annually, necessitates sustainable alternatives to single-use plastics. Compostable thermoplastic starch (TPS) films show promise but lack strength and durability compared to traditional plastics. This study employs an adaptive design of experiments (DoE) approach to enhance TPS films by optimizing testing points. The research focuses on varying concentrations of plasticizers (acetic acid and glycerol) in a water and potato starch mixture, aiming to identify the optimal ratio maximizing tensile strength and % elongation at break. Gaussian process regression (GPR) with uncertainty estimation and Bayesian optimization (BO) utilizing an acquisition function (AF) are employed. The …

Zeolite 13x Particles With Porous Tio2 Coating And Ag2o Nanoparticles As Multi-Functional Filler Materials For Face Masks, Wei Su, Kaiying Wang, Han Yu, Fateme Fayyazbakhsh, Jeremy Watts, Yue-Wern Huang, Jee-Ching Wang, Xinhua Liang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Adsorbent components in face masks are crucial for protecting individuals exposed to dangerous situations. In this study, one porous TiO₂ layer was deposited on zeolite 13X particles by coating hybrid organic/inorganic titanium alkoxide film via molecular layer deposition (MLD), followed by heat treatment to remove organic components in the MLD film. Various concentrations of Ag₂O nanoparticles were impregnated on the TiO₂-coated 13X particles, offering a wide range of antibacterial, antifungal, and antiviral characteristics. The obtained composite particles were characterized using X-ray photoelectron spectroscopy and thermal gravimetric analysis to study the composition and mass loading of …

Application Of Digital Rock Physics And Machine Learning To Improve The Understanding Of Fluid Flow Behavior Through Porous Media, Md Irfan Khan

Mechanical Engineering Theses

Accurately estimating reservoir rock properties and understanding capillary trapping mechanisms are crucial for fluid storage and flow modeling in porous media, particularly for applications such as carbon dioxide sequestration (CCS) and underground hydrogen storage (UHS). This thesis presents a comprehensive workflow that combines machine learning techniques and pore-network modeling approach to predict petrophysical properties and assess the impact of microscopic pore structures on capillary trapping. In the first part, a convolutional neural network (CNN) framework is used to predict rock properties—such as porosity, throat area, and pore surface area—from micro-computed tomography (micro-CT) X-ray images. It has been observed that incorporating …

Predictive Modeling And Sustainability Assessment Of Hydrothermal Liquefaction Of Seaweeds: A Techno-Economic And Life Cycle Analysis Approach, Micheal O. Asama

Mechanical Engineering Theses

This study presents comprehensive predictive models and an economic and environmental assessment of HTL for converting macroalgae into biofuels and valuable co-products. Predictive models were developed based on experimental kinetic data to simulate batch HTL of brown seaweed, capturing the yields of biocrude, gas, biochar, and water-soluble compounds as functions of key process variables, including temperature, time, pressure, and water-to-biomass ratio. Analysis of Variance (ANOVA) confirmed that temperature and residence time significantly affect biocrude yield, with an optimal yield of 23% achieved at 283°C, 200 bar, 54 minutes, and a 10:1 water-to-biomass ratio. The model’s predictive accuracy was validated with …

Deciphering Mechanochemical Influences Of Emergent Actomyosin Crosstalk Using Qcm‑D, Emily M. Kerivan, Victoria N. Amari, William B. Weeks, Leigh H. Hardin, Lyle Tobin, Omayma Y. Al Azzam, Dana N. Reinemann

Faculty and Student Publications

Purpose: Cytoskeletal protein ensembles exhibit emergent mechanics where behavior in teams is not necessarily the sum of the components’ single molecule properties. In addition, filaments may act as force sensors that distribute feedback and influence motor protein behavior. To understand the design principles of such emergent mechanics, we developed an approach utilizing QCM-D to measure how actomyosin bundles respond mechanically to environmental variables that alter constituent myosin II motor behavior.

Methods: QCM-D is used for the first time to probe alterations in actin-myosin bundle viscoelasticity due to changes in skeletal myosin II concentration and motor nucleotide state. Actomyosin bundles were …

Thermal Conductivity Characterization Of High Oleic Vegetable Oils Based Hybrid Nanofluids Formulated Using Gnp, Tio2, Mos2, Al2o3 Nanoparticles For Mql Machining, Anthony Chukwujekwu Okafor, Tobechukwu Kingsley Abor, Saidanvar Esanjonovich Valiev, Ignatius Echezona Ekengwu, Abiodun Saka, Monday Uchenna Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper presents the results of thermal conductivity characterization of six high oleic soybean oil (HOSO) and four high oleic canola oil (HOCO)-based hybrid nanofluids formulated with four types of nanoparticles (Graphene nanoplatelet (xGnP), TiO2, MoS2, and Al2O3) at nanoparticles wt.% concentration from 1 % to 7 % in 1 % increment using the two-step method for use in MQL machining of difficult-to-cut metals. Thermal conductivity of the formulated hybrid nanofluids were measured using Thermtest Transient Hot Wire Liquid Thermal Conductivity Meter at temperatures from 25 °C to 75 °C in increment of 10 °C. Obtained results showed that thermal …

Monitoring Of Laser Soldering Process In Hybrid Additive Manufacturing, Alexander P. Pustinger

Open Access Theses & Dissertations

Additive manufacturing (AM) has been a maturing technology that has expanded over the course of the last decade in major advancements especially in accessibility, process monitoring, modeling, and stock material design. As its industry use is growing, the demand for added improvements such as multi-functionality increases, such as with a hybrid system that allows for modification of printed parts with different electrical components like the Foundry Multi-3D system. The system's purpose is to create AM parts with multifunctional electrical components with the vision to expand to other areas of interest in manufacturing such as ISAM. This work explores the use …

Fabrication And Performance Of Scalable Bio-Engineered Porous Layers For Efficient Co2 Capture, Mary Sharon Rose Bondugula

Theses and Dissertations

This dissertation addresses the critical challenge of mitigating climate change by advancing CO2 capture technologies. As global CO2 emissions continue to rise, effective methods for capturing and separating CO2 from industrial processes are essential to combat climate change. Existing CO2 capture systems, such as Pressure Swing Adsorption (PSA) and Temperature Swing Adsorption (TSA), often rely on packed bed designs that face limitations, including poor heat and mass transfer, slow gas diffusion, and low thermal conductivity, reducing their efficiency. To overcome these challenges, this dissertation explores innovative solutions by developing advanced adsorbent coatings and scalable bed configurations.

This research begins by …

High Energy Density Lithium-Ion Battery Materials., Rachel Dewees

Electronic Theses and Dissertations

Growth of the EV industry has created an increased demand for Li-ion battery electrode materials, and support of a robust lithium-ion battery supply chain is a national imperative. For mainstream acceptance in the American market, the range of EVs must be improved, i.e., the energy density of the battery must be increased. Increasing the specific capacity of the electrode materials is the most direct strategy for increasing the energy density of the battery. Silicon anode materials have a theoretical capacity of over 3700 mAh·g^-1 - an order of magnitude beyond that of the graphitic materials which are currently implemented. …

Collapse Of Pre-Covid-19 Differences In Performance In Online Vs. In-Person College Science Classes, And Continued Decline In Student Learning, Gregg R. Davidson, Hong Xiao, Kristin Davidson

Faculty and Student Publications

Abstract: Studies comparing student outcomes for online vs. in-person classes have reported mixed results, though with a majority finding that lower-performing students, on average, fare worse in online classes, attributed to the lack of built-in structure provided by in-person instruction. The online/in-person outcome disparity was normative for non-major geology classes at the University of Mississippi prior to COVID-19, but the difference disappeared in the years after 2020. Previously distinct trendlines of GPA-based predictions of earned-grade for online and in-person classes merged. Of particular concern, outcomes for in-person classes declined to match pre-COVID-19 online expectations, with lower-GPA students disproportionally impacted. Objective …

Kinetic Modeling Of Dust Grain Dynamics In Electrostatic Sieving, Aaron Berkhoff, Easton Ingram, Fateme Rezaei, Jeffrey Smith, David Bayless, William Schonberg, Daoru Han

Chemical and Biochemical Engineering Faculty Research & Creative Works

A new kinetic particle modeling framework was developed to investigate electrostatic transport of lunar regolith dust particles with applications to the concept of electrostatic sieving. the new approach is based on kinetic particle dynamics and includes major modules of sampling the particle size distribution, solving electric fields, and tracking motion of charged dust grains. a case study for a concept of electrostatic sieving was chosen to validate the new model. the simulation achieved similar performance of particle size classification as reported in the literature. the new model is computationally efficient (takes a few minutes on a PC-type laptop computer) so …

Electrified Membrane For Water Treatment And Resource Recovery: Advancing Multiscale Strategies In Gas-Involving Reactions, Jianan Gao

Dissertations

Multifunctional, modular, and scalable water treatment technologies that operate without chemical additives are crucial for addressing global water pollution challenges. While traditional membrane-based separation processes are crucial for ensuring clean water supplies, they primarily focus on pollutant removal rather than on the upcycling of pollutants into valuable resources. Electrified membrane filtration presents a robust alternative, utilizing minimal or no chemical additives and harnessing electrical power to directly reduce contaminants or produce reactive oxidants or reductants on-site.

This dissertation is dedicated to the development of innovative electrochemically reactive membranes designed to address three major challenges: (1) the engineering of electrocatalysts with …

Collision Dynamics Of Compound Droplets In Microchannels: A Combined Numerical And Data-Driven Study, S M Abdullah Al Mamun

Dissertations

Understanding and predicting the hydrodynamic interactions of micron-scale droplets is crucial in a wide range of industrial and real-life applications, including microfluidics, pharmaceutics, drug delivery, food science, and enhanced oil recovery. These multi-phase and multi-scale phenomena are further complicated by the presence of core droplets of an immiscible fluid within shell droplets, known as compound droplets. The collisions and interactions of droplets in emulsions are influenced by various physical and geometric parameters, leading to distinct rheological and dynamic responses. This research employs numerical methods for a systematic parametric study of both simple and compound droplet pair collisions under confined shear …

Capacitive Sensors With Ultra-Small Capacitance For Smart Measurement And Control Systems, Rustam Baratov, Farrux Jabbor O'G'Li Ko'charov

Chemical Technology, Control and Management

This article discusses methods of low capacitance measurement of capacitive sensors. The results of the study of the amplitude-frequency (AF) and phase-frequency (PF) response of measurement circuits of capacitive sensors for low capacitances measurement, consisting of RC - differentiating elements are presented. The input and output parameters of the differentiating circuit and the complex transfer function are analyzed. The research results show that low capacitances measurement by measuring the rectangular pulses duration is the most effective measurement method.

Inspection Planning Of Subsea Pipeline Using Risk-Based Inspection, Ni Luh Triska Adelia, Badrul Munir, Johny Wahyuadi Soedarsono

Journal of Materials Exploration and Findings

Pipelines are an important tool in oil and gas exploration. Pipeline is a transmission and liquid collection lines, including their accessories, which transport fluids from one plant to another. In transmission and collection process, there is a possibility of failure which can have minor to major impact on personnel injury, the environment and interrupt the business process. To maintain safety and to prevent accidents, the source and cause of failure needs to be calculated. Risk-based inspection (RBI) is a method that can be used to calculate the risk and determine the inspection planning both schedule and method, by combining the …

Natural Fiber Reinforced Composites For Sustainable Additive Manufacturing., Athira Nair Surendran

Electronic Theses and Dissertations

Carbon fiber is widely known for its exceptional strength, making it a sought-after material in composite manufacturing, especially with thermosets and thermoplastics. Its major applications span aerospace, wind turbines, sports equipment, automotive interior and exterior parts, robotics and medical equipment. Recently, carbon fiber filament manufacturing has gained attention due to the availability of desktop 3D printers and the versatility and customizability that comes with the realm of 3D printing. Commercial carbon fiber production, primarily from polyacrylonitrile (PAN), is energy-intensive and derived from crude oil, contributing to significant environmental impacts and poor recyclability. Alternatively, lignocellulosic natural fibers present a possible sustainable …