Mechanical Engineering Commons^™

Experiments And Modeling Of The Chemo-Mechanically Coupled Behavior Of Polymeric Gels, Nikola Bosnjak

Dissertations

Polymeric materials consist of mutually entangled or chemically crosslinked long njitmolecular chains which form a polymer network. Due to their molecular structure, the njitpolymeric materials are known to undergo large deformation in response to various njitenvironmental stimuli, such as temperature, chemical potential and light.

When a polymer network is exposed to a suitable chemical solvent, the solvent molecules are able to diffuse inside the network, causing it to undergo a large volumetric deformation, known as swelling. In addition to volumetric deformation, this process involves the chemical mixing of the polymer network and solvent molecules, and is typically environmentally responsive. A …

Blast Shock-Wave Characterization In Experimental Shock Tubes, Sudeepto Kahali

Dissertations

Blast-induced traumatic brain injuries have affected U.S. soldiers deployed for extended periods in the gulf and Afghanistan wars. To identify the biomechanical and biochemical mechanisms of injury, critical in the identification of diagnostic and therapeutic tools, compressed gas-driven shock tubes are used by investigators to study shockwave-animal specimen interactions and its biological consequences. However, shock tubes are designed and operated in a variety of geometry with a range of process parameters, and the quality of shock wave characteristics relevant to field conditions and therefore the study of blast-induced traumatic brain injuries suffered by soldiers is affected by those conditions. Lab-to-lab …

Cycloidal-Drive Joint Design For Wearable Exoskeletons, Abhi J. Rawal

Theses

This thesis's scope was to construct a highly back drivable and compact joint design that can be used for wearable exoskeletons specifically designed to assist with rehabilitation. A compact cycloidal gear transmission was designed to satisfy the compactness requirement while ensuring the minimum torque is required for backdriving the mechanism. The joint was designed based on the compact cycloidal drive specifications, and the backdrivability test was performed to measure the minimum torque required (1.20 Nm) to backdrive. The joint design incorporates various important features such as rotation lock feature to prevent hyperextension, a housing design that offers the benefit of …

Microparticle Propulsion For In Vivo Navigation, Louis Rogowski

Mechanical Engineering Research Theses and Dissertations

Microscale propulsion impacts a diverse array of fields, with simplistic microrobots allowing for novel innovations in microscale surgery and drug delivery. Propulsion at the microscale is constrained by physics, with time-reversal and geometric symmetries limiting available propulsion mechanisms. However, certain fluid environments and surface coatings allow for the propulsion of microparticles through externally applied magnetic fields. Presented here is a detailed analysis of microparticles propelling using spontaneous symmetry breaking, flagella surface coatings, and multi-modal actuation mechanisms. Spontaneous symmetry breaking in nonlinearly viscoelastic fluids is presented for the first time in literature, with two equal and opposite propulsion states existing along …

Detection Of Nucleotides In Hydrated Ssdna Via 2-D H-Bn Nanopore With Ionic-Liquid/Salt-Water Interface, Jungsoo Lee

Multidisciplinary Studies Theses and Dissertations

Accomplishing slow translocation speed with high sensitivity has been the greatest mission for solid-state nanopore (SSN) to electrically detect nucleobases in single-stranded DNA (ssDNA). In this study, a method to detect nucleobases in ssDNA using a SSN is introduced by considerably slowing down the translocation speed and effectively increasing its sensitivity. The ultra-thin titanium dioxide (TiO₂) coated hexagonal boron nitride (h-BN) nanopore was fabricated, along with an ionic-liquid [bmim][PF₆]/2.0 M KCl aqueous (cis/trans) interfacial system, to increase both the spatial and the temporal resolutions. As the ssDNA molecules entered the nanopore, a …

Low-Intensity Vibration Restores Nuclear Yap Levels And Acute Yap Nuclear Shuttling In Mesenchymal Stem Cells Subjected To Simulated Microgravity, Matthew Thompson, Kali Woods, Joshua Newberg, Julia Thom Oxford, Gunes Uzer

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Reducing the musculoskeletal deterioration that astronauts experience in microgravity requires countermeasures that can improve the effectiveness of otherwise rigorous and time-expensive exercise regimens in space. The ability of low-intensity vibrations (LIV) to activate force-responsive signaling pathways in cells suggests LIV as a potential countermeasure to improve cell responsiveness to subsequent mechanical challenge. Mechanoresponse of mesenchymal stem cells (MSC), which maintain bone-making osteoblasts, is in part controlled by the “mechanotransducer” protein YAP (Yes-associated protein), which is shuttled into the nucleus in response to cyto-mechanical forces. Here, using YAP nuclear shuttling as a measurement outcome, we tested the effect of 72 h …

Development Of A Pediatric Cardiac Assist Maglev Pump For Use With A Universal Driver System., Landon Heath Tompkins

Electronic Theses and Dissertations

Heart failure (HF) remains the leading cause of death, affecting 26 million adults worldwide and 6.5 million adults in the United States. Pediatric HF patients have been a historically underserved population with few options for mechanical circulatory support (MCS) therapy, a leading treatment as an alternative to heart transplantation. To address this clinical need, the Inspired Universal MagLev System is being developed; a low cost, universal magnetically levitated extracorporeal MCS system with interchangeable single-use pumps that will ultimately provide adult and pediatric patients ventricular and respiratory assist therapies. The Inspired Pediatric VAD is the first single-use pump application for this …

Finite Element Analysis Of Total Knee Arthroplasty, Sean Yueh

Master's Theses

The total knee arthroplasty (TKA) has become one of the most successful procedures in all of medicine, with an average of over 966,000 operations performed a year. Since its introduction in 1968, the TKA’s surgical process and implant designs have continuously been improved to increase survivability. However, the need for a revision TKA – due to aseptic loosening – continues to be a problematic aspect of the procedure. Stress shielding induced by different design parameters of the implant has generated controversy in the determination of an ideal configuration. The purpose of this study is to investigate how implant design parameters …

Validation Of Novel Obstructive Sleep Apnea Treatment With Silicone Gel Experimental Models, Dustin Walter Burd

UNLV Theses, Dissertations, Professional Papers, and Capstones

Predictive modeling to increase treatment success rates for surgical procedures is becoming more common in the scientific community. For obstructive sleep apnea (OSA), modeling has been predominately performed using computers as opposed to experimental models. Computer simulation saves time by eliminating the need to fabricate complex experimental models but comes at the expense of insight gained through physical observations made in real time. Experimental models for studying OSA are needed to validate computational work, provide perspective on anatomical scale and demonstrate complex deformations in real time. This work addresses prior hurdles in experimental model fabrication with a novel process using …

Understanding The Effects Of Long-Duration Spaceflight On Fracture Risk In The Human Femur Using Finite Element Analysis, Keyanna Brielle Henderson

Master's Theses

Long-duration spaceflight has been shown to have significant, lasting effects on the bone strength of astronauts and to contribute to age-related complications later in life. The microgravity environment of space causes a decrease in daily mechanical loading, which signals a state of disuse to bone cells. This affects the bone remodeling process, which is responsible for maintaining bone mass, causing an increase in damage and a decrease in density. This leads to bone fragility and decreases overall strength, posing a risk for fracture. However, there is little information pertaining to the timeline of bone loss and subsequent fracture risk.

This …

The Economics Of Classroom 3-D Printing Of Open-Source Digital Designs Of Learning Aids, Nicole Gallup, Joshua M. Pearce

Michigan Tech Publications, Part 1

While schools struggle financially, capital for purchasing physical learning aids is often cut. To determine if costs could be reduced for learning aids, this study analyzed classroom-based distributed digital manufacturing using 3-D printing of open-source learning aid designs. Learning aid designs are analyzed in detail for their economic viability considering printing and assembly costs with purchased components and compared to equivalent or inferior commercial products available on Amazon. The results show current open-source 3-D printers are capable of manufacturing useful learning aids and that doing so provides high economic savings in the classroom. Overall, the average learning aid would save …

Annual Simulation Of Photovoltaic Retrofits Within Existing Parabolic Trough Concentrating Solar Powerplants, Nipun Goel, Hannah O'Hern, Matthew Orosz, Todd Otanicar

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Solar power for electricity production comes from either photovoltaics or concentrating solar power plants. The former has seen rapid growth and expansion due to the rapid fall in global prices, while the latter has seen moderate growth due to ability to cheaply store thermal energy for later use. Hybridization, or combining photovoltaics with concentrating solar power represents a potential way for lowering cost while enabling long term storage. Over 5 GW of capacity exist worldwide using parabolic trough style technology for concentrating solar power which presents a unique option for optimization in the form of a photovoltaic retrofit. While it …

Fabrication And Characterisation Of Highly Aligned Fibrous Assemblies, Tan Chin Joo

Student Works (2020-2029)

Vascular grafting has been an effective remedy to vascular diseases for decades. Autografting by using the veins or arteries in the patient’s body is found to have patency rate for years. However, autografting may not be possible when compatible vessels are not available. In this case, synthetic vascular grafts are found to be effective replacements. Nevertheless, synthetic grafts with diameter less than 4 mm becomes challenging due to thrombogenicity and mismatch of mechanical properties with the native vessels. Along this line, the ability to develop new biostable synthetic materials suitable for smaller grafts and the ability to evaluate their resulting …

Effectiveness Of Building Systems Strategies For Mitigation Of Airborne Transmission Of Sars-Cov-2, Meng Kong, Jialei Shen, Bing Dong, Jianshun Jensen Zhang

Mechanical and Aerospace Engineering - All Scholarship

Airborne transmission has been recognized as a major transmission pathway for the infectious disease COVID-19. This study investigated the effectiveness of several indoor air quality (IAQ) control strategies on the mitigation of airborne transmission of SARS-CoV-2, the virus that causes COVID-19. The well-known airborne disease infection risk model (Wells-Riley equation) was used to estimate the infection risk of the SARS-CoV-2 in seven (7) different types of spaces including conference center/ballrooms, hotel bistro//cafeteria, hotel lobby, classrooms (lecture), conference room/small classroom, hotel or cruise ship guest rooms and open plan offices. The IAQ control strategies included increased ventilation rate, improved air distribution …

Wetting-Driven Formation Of Present-Day Loess Structure, Yanrong Li, Weiwei Zhang, Shengdi He, Adnan Aydin

Faculty and Student Publications

© 2020 The Authors Present-day loess, especially Malan loess formed in Later Quaternary, has a characteristic structure composed of vertically aligned strong units and weak segments. Hypotheses describing how this structure forms inside original loess deposits commonly relate it to wetting-drying process. We tested this causal relationship by conducting unique experiments on synthetic samples of initial loess deposits fabricated by free-fall of loess particles. These samples were subjected to a wetting-drying cycle, and their structural evolutions were documented by close-up photography and CT scanning. Analysis of these records revealed three key stages of structural evolution: initiation (evenly distributed cracks appear …

In The Pursuit Of Assistance: A Team's Desire To Not Let A Congenital Amputation Get In A Young Boy's Way, Carl Russell Iii, Gavin Loucks, Kirsten Wozniak

Purdue Journal of Service-Learning and International Engagement

EPICS is a service-learning design program run through Purdue University. It strives to teach students design skills through providing for individuals, communities, and organizations in the surrounding area while mirroring engineering industry standards. BME (Biomedical Engineering) is a team within EPICS that strives to serve community partners through biomedical applications. William Sevick is an elementary school student with a congenital arm amputation. William and his family have been working with the BME team for the past three years designing assistive devices with the purpose of improving his actions in daily life such as eating, playing games, and riding his bike.

A Mathematical Framework For Estimating Risk Of Airborne Transmission Of Covid-19 With Application To Face Mask Use And Social Distancing, Rajat Mittal, Charles Meneveau, Wen Wu

Faculty and Student Publications

© 2020 Author(s). A mathematical model for estimating the risk of airborne transmission of a respiratory infection such as COVID-19 is presented. The model employs basic concepts from fluid dynamics and incorporates the known scope of factors involved in the airborne transmission of such diseases. Simplicity in the mathematical form of the model is by design so that it can serve not only as a common basis for scientific inquiry across disciplinary boundaries but it can also be understandable by a broad audience outside science and academia. The caveats and limitations of the model are discussed in detail. The model …

An Affordable And Portable Palpable System For Sensing Breast Tissue Abnormalities, Cody J. Clarke

Montview Journal of Research & Scholarship

Due to the high cost of equipment and lack of trained personnel, manual palpation is a preferred alternative breast examination technique over mammography. The process involves a thorough search pattern using trained fingers and applying adequate pressure, with the objective of identifying solid masses from the surrounding breast tissue. However, palpation requires skills that must be obtained through adequate training in order to ensure proper diagnosis. Consequently, palpation performance and reporting techniques have been inconsistent. Automating the palpation technique would optimize the performance of self-breast examination, optimize clinical breast examinations (CBE), and enable the visualization of breast abnormalities as well …

Emerging Gene-Editing Modalities For Osteoarthritis, Alekya S. Tanikella, Makenna J. Hardy, Stephanie M. Frahs, Aidan G. Cormier, Kalin D. Gibbons, Clare K. Fitzpatrick, Julia Thom Oxford

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Osteoarthritis (OA) is a pathological degenerative condition of the joints that is widely prevalent worldwide, resulting in significant pain, disability, and impaired quality of life. The diverse etiology and pathogenesis of OA can explain the paucity of viable preventive and disease-modifying strategies to counter it. Advances in genome-editing techniques may improve disease-modifying solutions by addressing inherited predisposing risk factors and the activity of inflammatory modulators. Recent progress on technologies such as CRISPR/Cas9 and cell-based genome-editing therapies targeting the genetic and epigenetic alternations in OA offer promising avenues for early diagnosis and the development of personalized therapies. The purpose of this …

Bioprinted In Vitro Model Of Human Glioblastoma, Rachel Lauren Schwartz

Theses and Dissertations

Glioblastoma multiform (GBM) is one of the most aggressive forms of primary brain tumors. GBM is fast progressing and resistant to treatment, resulting in a low survival rate. Conventional 2-dimensional tissue culture models cannot fully replicate the complexities of cancer lesions that contain multiple cell types and structures (e.g. vessels composed of endothelial cells, cancer cells, normal cells, etc.) as well as an intricate scaffold of proteins comprising the extracellular matrix (ECM). In addition, animal models cannot translate into the clinical disease in patients. Thus, this study has developed a bioprintable organ-on-a-chip (OOAC) model that mimics the important ECM factors …

Near Simultaneous Laser Scanning Confocal And Atomic Force Microscopy (Conpokal) On Live Cells, Joree N. Sandin, Surya P. Aryal, Thomas E. Wilkop, Christopher I. Richards, Martha E. Grady

Physiology Faculty Publications

Techniques available for micro- and nano-scale mechanical characterization have exploded in the last few decades. From further development of the scanning and transmission electron microscope, to the invention of atomic force microscopy, and advances in fluorescent imaging, there have been substantial gains in technologies that enable the study of small materials. Conpokal is a portmanteau that combines confocal microscopy with atomic force microscopy (AFM), where a probe "pokes" the surface. Although each technique is extremely effective for the qualitative and/or quantitative image collection on their own, Conpokal provides the capability to test with blended fluorescence imaging and mechanical characterization. Designed …

Biomechanical Investigation Of Individual With Over-Pronation And Over-Supination Foot During Walking, Ghani Nur Saibah

Student Works (2020-2029)

Over-pronation and over-supination foot conditions are foot deformity that can lead to unstable ankle and subtalar joint during walking. They are define as condition where the foot roll in and out excessively from its neutral line and can lead to misalignment of the foot and leg in human in which can create abnormal gait cycle. Therefore, the purposes of this study are to analyze the foot-ankle joint biomechanical behavior including the range of motion, joint moment, joint power and GRF in a complete gait cycle for all subjects in this study and to compare the foot-ankle biomechanical behavior between normal …

Processing-Structure-Property Relationships Of Biopolyester/Zinc Oxide Fibrous Scaffolds Engineered By Centrifugal Spinning, Victoria Padilla-Gainza, Heriberto Rodríguez-Tobías, Graciela Morales, Antonio Ledezma-Pérez, Carmen Alvarado-Canché, Cristobal Rodriguez, Robert Gilkerson, Karen Lozano

Mechanical Engineering Faculty Publications

This study addresses the processing of nonwoven fibrous materials obtained by centrifugal spinning method, namely Forcespinning; a high yield and low production cost technique little explored in this field. Poly(D, L-lactic acid) (PDLLA) and poly(3-hydroxybutyrate) (PHB) were used as matrices and reinforced with zinc oxide nanoparticles (n-ZnO). The morphology, mechanical, and thermal performance of the developed composites were analyzed as well as the antibacterial effect of n-ZnO. Fibrous materials with n-ZnO concentrations of 1, 3, and 5 wt. % for PDLLA and 1 and 3 wt. % for PHB were evaluated. The results showed that the incorporation of n-ZnO produces …

Revolutionizing The Mechanical Engineering Undergraduate Curriculum, Shelby Ann Mcneilly, Krishna Pakala, Donald Plumlee

Mechanical and Biomedical Engineering Faculty Publications and Presentations

As the age of technological advancement and occupational opportunity continues to progress, companies must be constantly adjusting and transforming in order to accommodate industry demands. With these quickly developing requirements comes an expectation of employee experience and skill sets. For individuals seeking a career in mechanical engineering, moving forward with the tools necessary for success in this continuously evolving world begins with higher education. This paper is the first of a three-part series to report on the progress of Boise State University’s Mechanical and Biomedical Engineering Department’s mission to implement a revolutionized curriculum in their academic program. This paper will …

Faculty Perspectives On The Impact Of Virtual Office Hours In Engineering Courses, Brooke-Lynn Caprice Andrade, Krishna Pakala, Diana Bairaktarova, Douglas Hagemeier, Harish Subbaraman

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Instructor-student interaction is an important element of a course design, but office hours can be challenging to attend based on students’ commitments. They have time and space limitations that prevent students from getting the help they need and often garner poor attendance. Virtual office hours can address issues related to low attendance and provide a low stakes environment where unhindered learning can happen. Virtual office hours are flexible, yield productive interactions, and all enrolled students can participate. This study reports on three engineering instructors’ perspectives on the efficacy of virtual office hours compared to the traditional face-to-face interactions with the …

Simulation Of Cu Precipitation In Fe-Cu Dilute Alloys With Cluster Mobility, Senlin Cui, Mahmood Mamivand, Dane Morgan

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Cu-rich precipitates formation is associated with the precipitation hardening of Fe-Cu based steels and the embrittlement of reactor pressure vessel steels under neutron irradiation. The accurate modeling of the time evolution of Cu-rich precipitates is therefore of fundamental importance for the design of Fe-Cu based steels and the prediction of the irradiation induced shift of the ductile to brittle transition temperature of reactor pressure vessels. This work applies cluster dynamics with mobile Cu monomers and clusters to model Cu precipitation in dilute Fe-Cu alloys at several temperatures. Optimized model parameters can be used to simulate the mean radius, number density, …

Heating Performance Analysis For Short-Term Energy Monitoring And Prediction Using Multi-Family Residential Energy Consumption Data, Sukjoon Oh, Chul Kim, Joonghyeok Heo, Sung Lok Do, Kee Han Kim

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Many smart apartments and renovated residential buildings have installed Smart Meters (SMs), which collect interval data to accelerate more efficient energy management in multi-family residential buildings. SMs are widely used for electricity, but many utility companies have been working on systems for natural gas and water monitoring to be included in SMs. In this study, we analyze heating energy use data obtained from SMs for short-term monitoring and annual predictions using change-point models for the coefficient checking method. It was found that 9-month periods were required to search the best short-term heating energy monitoring periods when non-weather-related and weather-related heating …

Smartphone-Tape Method For Calculating Body Segment Inertial Parameters For Analysis Of Pitching Arm Kinetics, Jay Sterner

Master's Theses

The objectives of this study were to (1) develop a non-invasive method (referred to as Smart Photo-Tape) to calculate participant-specific upper arm, forearm, and hand segment inertial properties (SIPs) (e.g. mass, center of mass, and radii of gyration) and (2) use those Smart Photo-Tape properties in inverse dynamics (ID) analyses to calculate injury-related pitching arm kinetics. Five 20- to 23- year-old baseball pitchers were photographed holding a baseball and analyzed using the Smart Photo-Tape method to obtain 3-D inertial properties for their upper arm, forearm, and hand. The upper arm and forearm segments were modelled as stacked elliptic cylinders and …

Tmtt Chimera Valve Attachment Process, Paulina Nguyen, Devin Debouk, Tamar Kazazian, Noah Thompson

Biomedical Engineering

No abstract provided.

Reading Robot, Gillian Watts, Andrew Myers, Sabrinna Tan, Taylor Klein, Omeed Djassemi

General Engineering

Presently, there is an insufficient availability of human experts to assist students in reading competency and comprehension. Our team’s goal was to create an improved socially assistive robot for use by therapists, teachers, and parents to help children and adults develop reading skills while they do not have access to specialists. HAPI is a socially assistive robot that we created with the goal of helping students practice their reading comprehension skills. HAPI enables a student to improve their reading skills without an educator present, while enabling educators to review the student's performance remotely. Design constraints included: physical size, weight, duration …