Mechanical Engineering Commons^™

Impulse And Performance Measurements Of Electric Solid Propellant In A Laboratory Electrothermal Ablation-Fed Pulsed Plasma Thruster, Matthew S. Glascock, Joshua L. Rovey, Kurt A. Polzin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric solid propellants are advanced solid chemical rocket propellants that can be controlled (ignited, throttled and extinguished) through the application and removal of an electric current. This behavior may enable the propellant to be used in multimode propulsion systems utilizing the ablative pulsed plasma thruster. The performance of an electric solid propellant operating in an electrothermal ablation-fed pulsed plasma thruster was investigated using an inverted pendulum micro-newton thrust stand. The impulse bit and specific impulse of the device using the electric solid propellant were measured for short-duration test runs of 100 pulses and longer-duration runs to end-of-life, at energy levels …

Safran Seat Attachment System, Craig John Kimball, Tyler Bragg, Lynette Cox

Mechanical Engineering

This final design review (FDR) document outlines the senior design project being carried out by a team of mechanical engineering undergraduate students attending California Polytechnic State University, San Luis Obispo for Safran Seats in Santa Maria, CA. The project originally was to design, build, and test a universal attachment to secure a widebody business class seat to seven aircraft models with different seat track geometry. The goal was to design, document, and create a finished product that fits design, weight, and manufacturing requirements, as well as passes static 9G FWD testing. Structural analysis, manufacturing analysis, FEA, and CAD assemblies will …

Miniaturized Ultraviolet Imager Phase Iii, Bradley D. Albright, Nicolas A. Armenta, Colin W. Harrop

Mechanical Engineering

This document details the work to date, June 9, 2020, done by the Cal Poly Mechanical Engineering senior project team, Miniaturized Ultraviolet Imager: Phase III (MUVI III), sponsored by the University of California, Berkeley – Space Sciences Laboratory (UCB SSL). MUVI III is the third senior project team of an ongoing design, MUVI: the prototype of a 2U sized CubeSat intended to capture aurora images in the ionosphere. The first team, MUVI I, finished development of the UV imager. The second team, MUVI II, designed the mirror mounting and deployable door mechanisms. The goal of MUVI phase III is to …

Development And Application Of Elliptic Blending Lag K-Omega Sst Standard And Wall-Distance-Free Turbulence Model, Wenjie Shang

McKelvey School of Engineering Graduate Student Theses & Dissertations

In recent decades, Computational Fluid Dynamics (CFD) has become the most widely used technology to understand the fundamental complex fluid dynamics of turbulent flows as well as for modeling of turbulent flows in industrial applications. In industrial applications, the widely used methodology is to solve Reynolds-Average Navier-Stokes Equations (RANS) equations in conjunction with a turbulence model since it strikes a balance between accuracy and computational cost compared to other high fidelity approaches namely the Large Eddy Simulation (LES) and Direct Numerical Simulation (DNS), There are a large number of turbulence models proposed in past five decades, majority of them are …

Thermal Transport Across The Interface Between Liquid N-Dodecane And Its Own Vapor: A Molecular Dynamics Study, Eric Bird, Jesus Gutierrez Plascencia, Zhi Liang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

There Are Two Possible Thermal Transport Mechanisms at Liquid-Gas Interfaces, Namely, Evaporation/condensation (I.e., Heat Transfer by Liquid-Vapor Phase Change at Liquid Surfaces) and Heat Conduction (I.e., Heat Exchange by Collisions between Gas Molecules and Liquid Surfaces). using Molecular Dynamics (MD) Simulations, We Study Thermal Transport Across the Liquid-Vapor Interface of a Model N-Dodecane (C12H26) under Various Driving Force Conditions. in Each MD Simulation, We Restrict the Thermal Energy to Be Transferred Across the Liquid-Vapor Interface by Only One Mechanism. in Spite of the Complex Intramolecular Interactions in N-Dodecane Molecules, Our Modeling Results Indicate that the Schrage Relationships, Which Were Shown …

Heat Transfer Measurements And Enhancement For Materials And Processes In Polymer Extrusion Based Additive Manufacturing, Hardikkumar Mangaldas Prajapati

Mechanical and Aerospace Engineering Dissertations - Archive

Additive manufacturing (AM) is a burgeoning method for manufacturing over the subtractive manufacturing methodologies. Among the various method of polymer additive manufacturing the fused deposition modeling (FDM) also known as 3D printing is the most popular technique. In this technique, a rastering extruder dispenses a thermoplastic material on to a bed at a temperature greater than its glass transition temperature to build the part. Due to the additive nature of the process, AM introduces several challenges related to functional properties such as strength, thermal conductivity, etc of the eventual part. Measurement of thermal conductivity of additively manufactured polymer samples in …

Reinitiation Mode Study Of Highly Irregular Detonation, Nandakumar Vijayakumar

Mechanical and Aerospace Engineering Dissertations - Archive

The propagation of detonation waves is governed by their stability characteristics. Interest in highly unstable detonation grew when early experiments revealed limits of operation to be directly proportional to the stability of detonation. This research focuses on reinitiation pathways of highly irregular self-sustaining detonation. This is an important aspect of stability which is not yet fully understood, while many possible mechanisms have been proposed in the literature. First, a one-dimensional instability model simulation was performed using a global one-step chemistry mechanism to understand the different unstable modes by increasing the activation energy of a mixture of hydrogen and oxygen. The …

Measurement And Optimization Of Thermal Transport Phenomena For Weld Strength Improvement In Polymer Extrusion Based Additive Manufacturing, Darshan Babu Ravoori

Mechanical and Aerospace Engineering Dissertations - Archive

Additive manufacturing (AM) processes involve layer-by-layer addition of material to fabricate a 3-dimensional part. AM offers significant design and manufacturing flexibility compared to traditional manufacturing approaches. The major challenge in polymer-based additive manufacturing (AM) is that printed parts often have poor thermal/structural properties. These properties depend on weld strength of filaments and which intern depends on the degree of healing/neck growth between deposited polymers. The major contribution of this dissertation is understanding the importance of heat transfer during the printing process on the polymer neck growth and presented with techniques to improve the thermal and structural strength of finished part. …

Design And Optimization Of Thermal Management Approaches In Data Center Applications, Rajesh Kasukurthy

Mechanical and Aerospace Engineering Dissertations - Archive

In the present day to day life, Internet of Things (IOT) is everything, i.e., Internet and telecommunication is needed for almost every task of our life, which require data centers. These data centers provide various facilities such as, data processing, storage, transmission, maintenance, operations etc., To perform these tasks, a huge amount of power is consumed, which in turn generates large amount of heat. As these data centers are to be made operational throughout the year, cooling of data centers is of utmost importance. The continued increase in heat flux at the chip level due to new and robust technology …

Computational Study Of Air-Cooled Servers With Improved Ducting And Chassis Re-Design, Himanshu Girishchandra Modi

Mechanical and Aerospace Engineering Theses - Archive

In recent years there has been a phenomenal increase in cloud computing, net-working, virtualization, and storage which has led to an increase in demand for data centers. To meet this demand, there is a need for the latest computing nodes which causes an increase in power consumption. The cooling system occupy almost 40% portion of total energy consumption. Per ASHRAE TC 9.9, IT equipment needs to operate within recommended and allowable temperatures and humidity zone based on the circumstances. As the inlet air temperature increases, fan power consumption increases too and the Central Processing Units (CPUs) and high heat-generating components …

Experimental Study Of Dynamic Cooling Of Racks Using Flow Control Devices, Fnu Akash

Mechanical and Aerospace Engineering Theses - Archive

A data center is a cluster of multiple servers that a company uses to store and process large amounts of data. Due to never-ending demands, the processor densities are increasing every day. A higher processor density would result in the servers heating up more than it would normally creating a need for an efficient cooling system. On an average a water-cooled system would consume up to 40% of the total power required by a data center. Studies are being conducted on improving the overall efficiency of the system by either improving the thermal properties of the system or by improving …

Modeling, Fabrication, And Characterization Of Porous Inconel 718 Structures Using Selective Laser Melting Process, Srihari Srivathsan

Mechanical and Aerospace Engineering Theses - Archive

Bio-inspired cellular structures are of great interest these days for many applications, from engineering research to industries. Honeycomb, Body-Centered Cubic with/without Z-struts (BCC-Z/ BCC), Face Centered Cubic with/without Z-struts (FCC-Z/ FCC), and Triply Periodic Minimal Surface (TPMS) such as Gyroid, Diamond, and Schwartz lattices are the most common bio-inspired lattice structures. These structures can be tailored based on their structural organization resulting in superior materials with lightweight properties, adequate strength, and low stiffness. Thankfully, additive manufacturing (AM) has made the fabrication of these complex cellular materials realistic. However, the use of AM could lead to several defects, such as damaged …

Cfd Analysis On Liquid Cooled Cold Plate Using Copper Nanoparticles, Sarthak Agarwal

Mechanical and Aerospace Engineering Theses - Archive

In today’s world, most data centres have multiple racks with numerous servers in each of them. The high amount of heat dissipation has become the largest server-level cooling problem for the data centres. The higher dissipation required, the higher is the total energy required to run the data centre. Although still the most widely used cooling methodology, air cooling has reached its cooling capabilities especially for High-Performance Computing data centres. Liquid-cooled servers have several advantages over their air-cooled counterparts, primarily of which are high thermal mass, lower maintenance and eventually lower costs by maintenance by labour. Nano-fluids have been used …

Prediction And Validation Of Continuous Fiber Stiffened Plates Manufactured With Continuous Fiber Fabrication, Nabeel Ahmed Khan

Mechanical and Aerospace Engineering Theses - Archive

The purpose of this thesis was to develop an analytical method for predicting the structural properties of continuous fiber stiffened plates, which was then validated both experimentally and via finite element analysis. The MarkForged Mark Two 3D printer enables parts to be printed with continuous carbon fibers embedded within them. A manufacturing process was developed for printing stiffened grids with our without skins, with continuous fiber reinforcement on the top and bottom of the stiffening ribs, which allows bending stiffness can be maximized. An orthotropic grid was printed using Continues Filament Fabrication (CFF), an additive manufacturing process that embeds reinforcing …

Impact Of Viscoelastic Properties Of Low Loss Printed Circuit Boards (Pcbs) On Reliability Of Wcsp Packages Under Drop Test, Akshay Boovanahally Lakshminarayana

Mechanical and Aerospace Engineering Theses - Archive

Reliability of electronic packages is a major concern as different failure modes are induced due to factors such as temperature loads, mechanical stresses, humidity, corrosion and so on. Finite element analysis (FEA) is often performed to assess reliability under different loading conditions such as thermal cycling, drop testing, power cycling and vibrational loads. Having accurate material property data is one of the key requirements to perform successful FEA study, and a significant amount of time and money is spent to perform accurate material characterizations. Lump modeling approach, where components are represented by a block and assigned effective properties, is commonly …

Measurement Of Change In Cte Of Pcbs Due To Single Phase Immersion Cooling And Impact Of Changed Properties Of Pcbs On Solder Joint Reliability Of Bga Package, Sameer Hemant Dhandarphale

Mechanical and Aerospace Engineering Theses - Archive

Oil immersion cooling in high-density data centers is emerging as an alternative for traditional air cooling because of the less power consumption, capacity to handle high power density and less space requirement. To adopt this technique extensively, effect of immersion on reliability of server components in dielectric coolant needs to be evaluated. One of the major reliability concerns in BGA package is 2nd level solder joint failure. The primary reason of solder joint failure is CTE mismatch between the PCB and the package. Also, difference in stiffness of the PCB and the package affects the solder joint reliability. As properties …

Aerodynamic Interactions Of Synchronized Propellers, Nathan Welker, Samuel Johnson

Utah Space Grant Consortium

Emerging advances in electric-propulsion technology are enabling aircraft to use distributed electric propulsion (DEP) to increase efficiency and maneuverability. Distributed electric propulsion can also provide unique take-off and landing abilities which are not commonly found on traditional aircraft. The implementation of DEP effectively decreases the spacing between propellers, introducing complex aerodynamic interactions that are not well understood. This study aims to obtain experimental measurements of the flow fields of synchronized propellers at close-proximity in a side-by-side configuration using particle image velocimetry (PIV) in a wind tunnel. The results of this work will be focused on identifying the impact closely-spaced propellers …

Monte-Carlo Methods And The Step-Back Kalman Filter For Orbital State Estimation, Louis Tonc

Utah Space Grant Consortium

This research assesses the performance of filtering schemes for tracking uncooperative satellites through space-based optical measurements, and identifies a simple and numerically stable methodology that ameliorates the poor performance of standard filtering schemes at a substantially reduced cost in comparison to nonlinear particle filter-based remedies. Traditional filtering schemes, such as the extended Kalman filter (EKF) and unscented Kalman filter (UKF), both diverge when tracking a resident space object (RSO) in geosynchronous orbit (GEO) when there is a long time duration between measurements. This divergence is identified as a consequence of nonlinearity in the dynamics and nonlinearity in the optical measurements, …

Design Optimization Of An Elastically Supported Multi-Beam Rotordynamic System To Minimize Flexural Response With Considerations For Robustness, Bret R. Hauser

Mechanical and Aerospace Engineering Dissertations - Archive

Modern rotating machines are often required to operate with a small physical footprint and/or overall weight; necessitating that they utilize wide-ranging shaft speed to accomplish needed power levels. It is not uncommon that these designs also be required to support operation through a speed range encompassing multiple Critical Speeds while also limiting flexural vibrations to acceptable levels. Design optimization of this class of problem can be particularly difficult in that responses can be highly multi-modal and, when coupled with Finite Element (FE) solvers meet the conditions of a High Dimensional, Computationally Expensive Black Box (HEB) system. Because of this, some …

Machine Learning Modeling Of Horizontal Photovoltaics Using Weather And Location Data, Christil Pasion, Torrey Wagner, Clay Koschnick, Steven Schuldt, Jada Williams, Kevin Hallinan

Mechanical and Aerospace Engineering Faculty Publications

Solar energy is a key renewable energy source; however, its intermittent nature and potential for use in distributed systems make power prediction an important aspect of grid integration. This research analyzed a variety of machine learning techniques to predict power output for horizontal solar panels using 14 months of data collected from 12 northern-hemisphere locations. We performed our data collection and analysis in the absence of irradiation data-an approach not commonly found in prior literature. Using latitude, month, hour, ambient temperature, pressure, humidity, wind speed, and cloud ceiling as independent variables, a distributed random forest regression algorithm modeled the combined …

Discrete Vortex Modeling Of Aerodynamic Flutter Of A Flat Plate With Damped Oscillations, Emma Chao

UNLV Theses, Dissertations, Professional Papers, and Capstones

Aerodynamic flutter is the unstable oscillation of a body caused by the interaction of aerodynamic forces, structural elasticity, and inertial effects induced by vortex shedding. Current models of this phenomenon require finite element analysis and extensive computational power and processing time. The purpose of this study was to develop and validate a program that is faster and more efficient than existing approaches by using the discrete vortex method (DVM). By reducing the complexities of flutter to the shedding of vortices in an inviscid model of a two-dimensional flat plate with a torsional spring constant at its center, this phenomenon can …

Numerical And Experimental Analysis Of Air-Cooled Condensers, Kaipo Kekaula

UNLV Theses, Dissertations, Professional Papers, and Capstones

The scope of this project is to numerically and experimentally dry cooling process in air-cooled condensers (ACCs) designed for concentrated solar power (CSP) applications. This effort is driven by the growing economic and political pressure to reduce water consumption during power generation due to limited water resources in the arid geographic climate of the southwestern United States. A computational approach is used in conjunction with experimental validation to gain a more complete understanding of these systems.

Traditionally research into ACCs have been largely limited to air-side heat transfer modelling as it accounts for a large portion of the total thermal …

Change Of Exposure Time Mid-Test In High Temperature Dic Measurement, Thinh Quang Thai, Adam J. Smith, Robert J. Rowley, Paul R. Gradl, Ryan B. Berke

Mechanical and Aerospace Engineering Faculty Publications

Performing digital image correlation (DIC) at extreme temperatures has been greatly challenging due to the radiation which saturates the camera sensor. At such high temperatures, the light intensity emitted from an object is occasionally so powerful that the acquired images are overwhelmingly saturated. This induces data loss, potentially ruining the test, thus requiring the user to restart the test. For this reason, selection of an appropriate camera sensitivity plays a crucial role prior to beginning the test. Exposure time is a factor contributing to camera sensitivity and it is the easiest setting to manipulate during the test since it introduces …

Urban Cargo Transport Uav Final Design Review, Niko Giannakakos, Rafael Barreto Gutierrez, Tejas Bhavsar

Senior Design Project For Engineers

Delivery of goods to homes and offices over the last decades has seen a significant increase as more people and businesses need or want items sent directly to them. With the increase in demand, technology has also experienced a rapid growth, specifically in the field of unmanned aerial vehicles (UAVs). Many major companies are currently researching UAVs as the future of their delivery operations. With this ever-growing demand, NASA has issued a design competition of a UAV developed for urban deliveries. This unmanned aircraft system (UAS) would need to be able to deliver small packages, in a timely manner, within …

Aerial Screw Vtol Rotorcraft, Macale Rielly, Alexa Culp, Thomas Osteen, Adeline Perry

Senior Design Project For Engineers

Known as the “Renaissance Man,” DaVinci’s impressive knowledge of mechanics and inventive prowess would influence engineers and innovators hundreds of years later to make human flight a reality. However, due to the limited capacity of engineering and manufacturing at the time, his invention had been shallowly investigated in a production setting. This project strove to properly acknowledge DaVinci’s invention by thorough examination and critical analysis of his concept with the hopes of gaining a better understanding of why it is considered the “foundation of vertical flight”.

An iterative design approach was employed, utilizing faculty and university resources, team knowledge from …

A Numerical Investigation Of Microgravity Evaporation, Daniel Peter Ringle

Dissertations and Theses

Evaporation is important to myriad engineering processes such as cooling, distillation, thin film deposition, and others. In fact, NASA has renewed interest in using cabin air pressure evaporation as a means to recycle waste water in space. As one example, NASA recently conducted experiments aboard the International Space Station (ISS) to measure evaporation rates in microgravity and to determine the impacts of porous structure on the process. It has long been assumed that differences in evaporation rates between 1-g₀ and microgravity are small. However, discrepancies by as much as 40% have been observed in practice. The assumption now …

Thermal Modeling Of Additive Manufacturing Using Graph Theory: Validation With Directed Energy Deposition, Jordan Severson

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Metal additive manufacturing (AM/3D printing) offers unparalleled advantages over conventional manufacturing, including greater design freedom and a lower lead time. However, the use of AM parts in safety-critical industries, such as aerospace and biomedical, is limited by the tendency of the process to create flaws that can lead to sudden failure during use. The root cause of flaw formation in metal AM parts, such as porosity and deformation, is linked to the temperature inside the part during the process, called the thermal history. The thermal history is a function of the process parameters and part design.

Consequently, the first step …

Investigation Of Navigation Systems For Size, Cost, And Mass Constrained Satellites, Omar Awad

USF Tampa Graduate Theses and Dissertations

The feasibility of using radically inexpensive micro-electromechanical system (MEMS) technology for navigation of a nanosatellite is investigated with a focus on attitude estimation. Typically, larger satellites are equipped with star cameras, sun sensors, or Earth horizon sensors for attitude estimation. These sensors can provide very accurate attitude measurements. A nanosatellite is highly size, power, and cost constrained and cannot readily accommodate these sensors. Our mission is to design, build, and operate a radically inexpensive nanosatellite system. While there is no consensus on what constitutes a "radically inexpensive" satellite, our goal is a maximum cost of $10,000 per unit. This precludes …

Quantifying Wicking In Functionlized Surfaces, Maureen Winter, Ryan Regan, Alfred Tsubaki, Craig Zuhlke, Dennis Alexander, George Gogos

UCARE: Research Products

Wicking remains the enigmatic key factor in many research areas. From boiling in power plants, to anti-icing on plane wings, to medical instruments, to heat pipes, efficiency and safety depend on how quickly a surface becomes wet. Yet wicking remains difficult to quantify and define as a property of the surface. This experiment strives to measure the wicking property by examining the rate that a liquid can be pulled out of a container. A superhydrophilic surface is placed in contact with the liquid at the bottom of a tube so that the volume flow rate across the surface can be …

Nytrox As “Drop-In” Replacement For Gaseous Oxygen In Smallsat Hybrid Propulsion Systems, Stephen A. Whitmore

Mechanical and Aerospace Engineering Faculty Publications

A medical grade nitrous oxide (N₂O) and gaseous oxygen (GOX) “Nytrox” blend is investigated as a volumetrically-efficient replacement for GOX in SmallSat-scale hybrid propulsion systems. Combined with 3-D printed acrylonitrile butadiene styrene (ABS), the propellants represent a significantly safer, but superior performing, alternative to environmentally-unsustainable spacecraft propellants like hydrazine. In a manner analogous to the creation of soda-water using dissolved carbon dioxide, Nytrox is created by bubbling GOX under pressure into N₂O until the solution reaches saturation. Oxygen in the ullage dilutes N₂O vapor and increases the required decomposition energy barrier by several orders …