Open Access. Powered by Scholars. Published by Universities.®

Semiconductor and Optical Materials Commons™

Open Access. Powered by Scholars. Published by Universities.®

Physics

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 181 - 208 of 208

Full-Text Articles in Semiconductor and Optical Materials

Smart Structures For Control Of Optical Surfaces, D. Michael Sobers Jr. Mar 2002

Smart Structures For Control Of Optical Surfaces, D. Michael Sobers Jr.

Theses and Dissertations

The development of lightweight, large-aperture optics is of vital importance to the Department of Defense and the US Air Force for advancing remote sensing applications and improving current capabilities. Synthetic polymer optics offer weight and flexibility advantages over current generation glass mirrors, but require active control to maintain tight surface figure tolerances. This research explores the feasibility of using imbedded piezoelectric materials to control optical surfaces. Membrane-based and stiff piezo-controlled mirrors were constructed to develop and validate control techniques. Test results verified that surface control on the order of tens of wavelengths is possible using these systems.

Go to article

Oxidation-Induced Stacking Fault In (100) And (111) Silicon Wafers, Mei Keat Liang Jan 2002

Oxidation-Induced Stacking Fault In (100) And (111) Silicon Wafers, Mei Keat Liang

Student Works (2000-2009)

Oxidation-induced stacking fault (OISF) dimension and density change on (100) and (111) wafers, as a result of repeated preferential etching were studied using AFM. optical microscope and angular polishing techniques. Density on (100) and (111) wafers is independent of surface removal up to 3.0µm. This indicates the single layer nature of OISF formed from the sand blasted wafer. Besides having higher density, OISFs from (100) wafer were longer than OISF from (111) wafer. OISF width increases linearly with surface removal however the length does not change significantly with surface removal. ln the OISF normal depth studies using angular polishing technique, …

Go to article

Time-Resolved Photoluminescence Of Inas/Gainsb Quantum Well Lasers, Michael R. Mckay Jun 2001

Time-Resolved Photoluminescence Of Inas/Gainsb Quantum Well Lasers, Michael R. Mckay

Theses and Dissertations

In the world of semiconductor photonic device fabrication, one important objective may be to extract as much light as possible from the device. In these devices, photons are created when electrons recombine with holes by transitioning from a high-energy state to a lower one. Unfortunately, electron-hole recombination does not always result in the formation of a photon. There are three basic types of recombination: the first results in the formation of a photon and is called radiative recombination; and the second and third, known as Shockley-Read-Hall and Auger recombination, result in the heating of the device and do not produce …

Go to article

Photoluminescence Of Single Quantum Well Structures In Gallium Arsenide, Christian A. Bartholomew Mar 2001

Photoluminescence Of Single Quantum Well Structures In Gallium Arsenide, Christian A. Bartholomew

Theses and Dissertations

The continued development of state-of the-art semiconductor technologies and devices by the United States Air Force and the Department of Defense requires accurate and efficient techniques to evaluate and model these new materials. Of particular interest to the Air Force are quantum well structures which can be used for small-scale laser sources in fly-by-light applications, as efficient infrared countermeasures to heat-seeking missiles, or as advanced seekers in optically guided missiles. This thesis provides the initial experimental procedures and data necessary to begin producing accurate yet robust models. Although carrier effective masses could not be evaluated using hot-electron photoluminescence, photoluminescence excitation …

Go to article

Numerical Study Of Optical Delay In Semiconductor Multilayer Distributed Bragg Reflector And Tunable Microcavity Structures, Michael I. K. Etan Mar 2001

Numerical Study Of Optical Delay In Semiconductor Multilayer Distributed Bragg Reflector And Tunable Microcavity Structures, Michael I. K. Etan

Theses and Dissertations

The Air Force has a growing need for the greater bandwidth, speed, and flexibility offered by optical communication links. Future space systems and airborne platforms will most likely use optical signals for efficient power transmission and to minimize the possibility of spoofing and eavesdropping. Tunable optical delays play an important role in the implementation of free space optical communication links. The primary challenge in implementing these systems is the active maintenance of coherent wave fronts across the system's optical aperture. For space applications, this aperture may he hundreds of meters in diameter. Spatial segmentation of a large aperture into smaller …

Go to article

Effects Of Argon Dilution Of Silane On The Optical Properties And Surface Morphology Of Hydrogenated Amorphous Silicon, Choon Kheam Lim Jan 2001

Effects Of Argon Dilution Of Silane On The Optical Properties And Surface Morphology Of Hydrogenated Amorphous Silicon, Choon Kheam Lim

Student Works (2000-2009)

Hydrogenated amorphous silicon (a.Si:H) was prepared using the d.c plasma grow discharge system. Two sets of samples were prepared and studied. The first set of samples referred to as the high argon dilution films were prepared from the discharge of pure silane at flow-rate of 5sccm and silane at the same flow-rate diluted in argon at flow-rates of 5, 10 and 15sccm. Similarly, the second set of sample referred to as the low argon dilution films were prepared from the discharge of pure silane at flow-rate of20sccm and silane at the same flow-rate diluted in argon at the flow-rates mentioned …

Go to article

Output Control Of Vertical Microcavity Light Emitting Device, James A. Lott Apr 1999

Output Control Of Vertical Microcavity Light Emitting Device, James A. Lott

AFIT Patents

An improved intracavity sensor based output power control for microcavity light emitting devices. An improved phototransistor transducer is both configured and physically disposed so that it passively transmits the spurious optical energy output of the microcavity light emitting device while simultaneously generating a light determined electrical signal of easily used large magnitude that is nearly free of error. The base-collector region of the transistor is disposed with a quantum well absorbing layer and produces a signal responsive to a selected emission wavelength. The configuration of the optical energy communicating transducer is arranged so that it is improved in sensitivity and …

Go to article

Electrical Characterization Of Ion-Implanted 4h-Silicon Carbide, Christian P. Morath Mar 1999

Electrical Characterization Of Ion-Implanted 4h-Silicon Carbide, Christian P. Morath

Theses and Dissertations

Electrical characterization has been performed on ion-implanted p-type 4H-SiC to assess the activation efficiency and implantation-related damage recrystallization with the intention of developing an implantation/annealing scheme. Low doped (Na - Nd = 5x10(exp 15)/cu cm) epitaxial p-type layers grown by MOCVD were implanted with Al or B at doses ranging from 1x10(exp 13) to 1x10(exp 14)/sq cm at room temperature or 500 deg. C. The electrical technique of Temperature Dependent Hall Effect (TDHE) indicated that Al and B act as shallow acceptors 4H-SiC with ionization energies of ^252 and ^285 meV, respectively. The highest activation efficiency for Al and B …

Go to article

Experimental Investigation Of Nonlinear Dynamics In Single Mode Semiconductor Laser Diodes With Phase Conjugate Feedback, Gordon T. Hengst Aug 1997

Experimental Investigation Of Nonlinear Dynamics In Single Mode Semiconductor Laser Diodes With Phase Conjugate Feedback, Gordon T. Hengst

Theses and Dissertations

The semiconductor laser diode offers a unique system to investigate nonlinear dynamics when optical feedback is applied. Although there is extensive research of laser diodes with optical feedback from normal dielectric mirrors, very little has been done experimentally to analyze the effects of degenerate phase conjugate feedback from a BaTiO3 crystal. This research experimentally investigated the dynamics of a single-mode laser diode with weak phase conjugate feedback using both the self-pumped and double phase conjugate geometries. The experimental results validated a mathematical model which numerically evaluates the Lang-Kobayahsi coupled differential equations. The model simulated the nonlinear behavior of a …

Go to article

Investigation Of The Optical Properties Of Ordered Semiconductor Materials, Jack E. Mccrae Jr. Jan 1997

Investigation Of The Optical Properties Of Ordered Semiconductor Materials, Jack E. Mccrae Jr.

Theses and Dissertations

Optical studies have been conducted upon CdGeAs2 and ZnGeP2, two of the most promising semiconductors being developed for mid-infrared non-linear optics applications. These experiments included photoluminescence (PL) studies of both compounds as well as photoreflectance (PR) measurements upon CdGeAs2. In addition, Hall effect measurements were carried out upon CdGeAs2, to aid in interpretation of the optical data. PL was measured as a function of laser power, sample temperature, and crystal orientation for CdGeAs2. One broad weak peak near 0.38 eV, and another somewhat narrower and often far brighter peak near 0.57 …

Go to article

Design Of Gradient Index Optical Thin Films, Jeffrey J. Druessel Jun 1996

Design Of Gradient Index Optical Thin Films, Jeffrey J. Druessel

Theses and Dissertations

Gradient index thin films provide greater flexibility for the design of optical coatings than the more conventional 'layer' films. In addition, gradient index films have higher damage thresholds and better adhesion properties. This dissertation presents an enhancement to the existing inverse Fourier transform gradient index design method, and develops a new optimal design method for gradient index films using a generalized Fourier series approach. The inverse Fourier transform method is modified to include use of the phase of the index profile as a variable in rugate filter design. Use of an optimal phase function in Fourier-based filter designs reduces the …

Go to article

Photoluminescence And Electroluminescence Of Erbium And Neodymium Implanted Semiconductors, James R. Hunter Dec 1995

Photoluminescence And Electroluminescence Of Erbium And Neodymium Implanted Semiconductors, James R. Hunter

Theses and Dissertations

Low temperature photoluminescence (PL) and electroluminescence (EL) measurements were used to study the excitation of erbium- and neodymium-implanted GaAs and AlxGa1-xAs (x=0. 1, 0.3) pn-junctions. The rare-earth (RE) emissions were investigated as a function of ion dose, aluminum mole fraction, laser excitation power, and applied forward bias voltage for the implanted samples. Low temperature PL was also measured from Er doped silicon grown by the metalorganic chemical vapor-phase deposition (MOCVD) method using various growth parameters.. The MOCVD-grown Si samples were studied as a function of metalorganic source temperature, silane (SiH4) flow, growth time, and …

Go to article

Optical Characterization Of Indium Arsenide Antimonide Semiconductors Grown By Molecular Beam Epitaxy, Michael A. Marciniak Sep 1995

Optical Characterization Of Indium Arsenide Antimonide Semiconductors Grown By Molecular Beam Epitaxy, Michael A. Marciniak

Theses and Dissertations

The material parameters and crystalline quality of undoped, MBE-grown InAs1-xSbx nearly lattice-matched to (100) GaSb (-0.617% ≤ Δ a-a ≤ +0.708%) similar to material used for mid-infrared semiconductor lasers were determined by optical characterization. Absorption measurements at temperatures between 6-295 K determined the energy gap and wavelength-dependent absorption coefficient for each sample. The compositional dependence of the energy gap was anomalous when compared to previously reported data, suggesting phase separation existed in the material. The samples were also studied by temperature- and excitation-dependent photoluminescence (PL), which, for the majority of cases, showed only a single band-edge peak, …

Go to article

The Current Voltage Characteristics Of Electron Beam Controlled Thin Film Diamond Switches, Christopher Anthony Molina Oct 1994

The Current Voltage Characteristics Of Electron Beam Controlled Thin Film Diamond Switches, Christopher Anthony Molina

Electrical & Computer Engineering Theses & Dissertations

The dark current of natural diamond thin films and the induced current due to electron-beam irradiation was measured up to a range of 7000Ncm'. The contact material was aluminum, annealed and unannealed. Switching experiments were performed with electron energies ranging from 70keV to 172keV. The switching results obtained are strongly dependent on the biasing polarity, incident electron energy, and whether the contact is blocking or Ohmic in nature. A simple model which takes traps into consideration allows us to explain the various switching responses. The range of electrons which define, in part, the switch mode was measured for one sample …

Go to article

The Excitation Mechanism Of Praseodymium-Doped Semiconductors, Paul L. Thee Jun 1994

The Excitation Mechanism Of Praseodymium-Doped Semiconductors, Paul L. Thee

Theses and Dissertations

This study on praseodymium Pr luminescence in AlxGa1-xAs was conducted to enhance the understanding of the excitation mechanism. Pr was implanted at 390 keV with doses from 5 x 1012 to 5 x 1013 sq cm into AlxGa1-xAs x0.0 to 0.50 wafers which were annealed using the rapid thermal annealing RTA method. Low temperature photoluminescence PL was conducted using an Ar-ion laser and Ge detector. PL emissions of Pr from all hosts include peaks near 1.3 and 1.6 µm which are assigned to the intra-4f transitions of 1G4 yielding 3H5 …

Go to article

The Effects Of Optical Feedback On Polarization Of Vertical Cavity Surface Emitting Lasers, Gregory J. Vansuch Dec 1993

The Effects Of Optical Feedback On Polarization Of Vertical Cavity Surface Emitting Lasers, Gregory J. Vansuch

Theses and Dissertations

Vertical Cavity Surface Emitting Lasers VCSELs are a type of semiconductor laser with a cavity oriented orthogonally to the planes of material growth. These lasers differ from conventional edge emitting lasers in several important ways. They have symmetric output beams and they are easily built into two dimensional arrays, making them very attractive as photonic components. The characteristic of interest in this thesis is polarization. While the asymmetric cavities of edge emitters exhibit a clear preference for light polarized in a particular direction, the cylindrically symmetric cavity of a VCSEL has no clear preference. Therefore, it should be relatively easy …

Go to article

Light Injection From An Active Cladding To The Core Of A Fiber Optic Fluorosensor, Alvin Leon Bryant Jul 1993

Light Injection From An Active Cladding To The Core Of A Fiber Optic Fluorosensor, Alvin Leon Bryant

Electrical & Computer Engineering Theses & Dissertations

A fluorosensor works on the basis of light injection from the clad into the core of an optical fiber. The sensitivity of such a sensor depends on the efficiency of light injection. Conditions necessary for a high injection efficiency are experimentally determined. The refractive index difference between the core and the clad,ncore -nclad, must be maximized to achieve a high injection efficiency. Since an air clad has the least refractive index, a bare core fiber will have a maximum efficiency. Standard optical fibers used for communication employ a minimum value for ncore -nclad, in order …

Go to article

Study Of Single-Fiber Fiber Optic Lever Microphone, Trung Duc Nguyen Jul 1993

Study Of Single-Fiber Fiber Optic Lever Microphone, Trung Duc Nguyen

Electrical & Computer Engineering Theses & Dissertations

Fiber optic sensors are widely used in today's technological applications, providing many advantages that conventional sensors lack. In particular, there is a demand in hypersonic applications to develop microphones to measure acoustic pressure that performs in high temperature and noisy surroundings. This thesis analyzes fiber optic lever microphones (FOLM), since they perform at high temperatures. An FOLM system is an intensity modulated sensor, which is simple to implement and is small in size. Two models of the FOLM have been fabricated and calibrated. The first model uses a seven-element fiber array while the second uses a single-fiber to transmit and …

Go to article

Design And Performance Evaluation Of A Gas Chromatograph Micromachined In A Single Crystal Silicon Substrate, Rocky R. Reston Mar 1993

Design And Performance Evaluation Of A Gas Chromatograph Micromachined In A Single Crystal Silicon Substrate, Rocky R. Reston

Theses and Dissertations

This investigation designed and developed a miniature gas chromatograph (GC) using silicon micromachining techniques. The GC is composed of a miniature sample injector (10 µl sample loop); a 0.9 m long, rectangular-shaped (300 µm width and 10 micrometers height) capillary column coated with a 0.2 µm thick copper phthalocyanine (CuPc) stationary phase; and a dual-detector scheme incorporating a CuPc-coated chemiresistor and a 125 µm diameter thermal conductivity detector bead. Micromachining was employed to fabricate the sample injector interface, the GC column, and the dual-detector cavity. A novel processing technique was developed to sublime the CuPc stationary phase coating on the …

Go to article

Cathodoluminescence Spectroscopy Of Zinc Germanium Phosphide Zngep2, Michael R. Gregg Dec 1992

Cathodoluminescence Spectroscopy Of Zinc Germanium Phosphide Zngep2, Michael R. Gregg

Theses and Dissertations

Zinc Germanium Phosphide (ZnGeP2) is a nonlinear semiconductor suitable for use as a laser tuning element over the two to six micron wavelength range. Although this crystal has been studied in the past, its luminescent properties are not yet well understood. In this present study, ZnGeP2 has been examined using cathodoluminescence spectroscopy (CL). Specifically, the spectral dependence of the CL was obtained as a function of electron beam energy, beam current and temperature. The resulting CL was found to be polarized with a peak structure that was dependent on the polarization. This peak structure observed by CL …

Go to article

Processability Of Polythiophene Thin Films By Ultraviolet Photo Bleaching, Derek D. Fletcher Dec 1992

Processability Of Polythiophene Thin Films By Ultraviolet Photo Bleaching, Derek D. Fletcher

Theses and Dissertations

Materials possessing strong ��(3) optical properties such as Polythiophene are sought for the production of optical switches. Polythiophene thin films produced by plasma enhanced CVD show a surface rms roughness of 10-15 angstroms over single square micron areas which is acceptable for wave guiding in the near IR. This research investigates permanently changing the optical properties of such a thin film by exposure to UV radiation (254 nm, 35 mW/cm2), known as photo bleaching, in hope of creating a refractive index boundary for use in total internal reflection. After 60 minutes exposure the refractive index shows …

Go to article

Fluorescent Lifetime Measurements Of Rare Earth Elements In Gallium Arsenide, Danny J. Topp Dec 1990

Fluorescent Lifetime Measurements Of Rare Earth Elements In Gallium Arsenide, Danny J. Topp

Theses and Dissertations

Lifetime measurements of the excited states of three GaAs semiconductors doped with the rare earth elements Erbium (ER), Praseodymium (Pr) , and Thulium (Tm) has been studied using a pulsed nitrogen laser and germanium detector. The measurements were made with an experimental set up with a system response time of 0.34 micro seconds. A 330 milliwatt nitrogen laser with a wavelength of 3370 angstrums was used to excite transitions of the rare earth elements.

Go to article

Characterization Of Barium Titanate As An Optical Amplifier, George A. Vogel Dec 1990

Characterization Of Barium Titanate As An Optical Amplifier, George A. Vogel

Theses and Dissertations

The introduction of two-beam coupling in photorefractive materials has resulted in an extensive amount of research into their use as optical processing/computing elements. This dissertation develops the theoretical equations for two-beam coupling in barium titanate as an optical amplifier. One of the factors which limits the optical gain in photorefractive crystals is the loss of pump beam power to the amplification of parasitic light (beam fanning). This parasitic light is produced by light scattered from the pump beam by imperfections on both the crystal face and within the crystal. Through the analysis of signal and noise amplification as functions of …

Go to article

Influence Of Copper Doping On The Performance Of Optically Controlled Gaas Switches, St. T. Ko, V. K. Lakdawala, K. H. Schoenbach, M. S. Mazzola Jan 1990

Influence Of Copper Doping On The Performance Of Optically Controlled Gaas Switches, St. T. Ko, V. K. Lakdawala, K. H. Schoenbach, M. S. Mazzola

Electrical & Computer Engineering Faculty Publications

The influence of the copper concentration in silicon-doped gallium arsenide on the photoionization and photoquenching of charge carriers was studied both experimentally and theoretically. The studies indicate that the compensation ratio (NCu/NSi) is an important parameter for the GaAs:Si:Cu switch systems with regard to the turn-on and turn-off performance. The optimum copper concentration for the use of GaAs:Si:Cu as an optically controlled closing and opening switch is determined.

Go to article

Gaas Photoconductive Closing Switches With High Dark Resistance And Microsecond Conductivity Decay, M. S. Mazzola, K. H. Schoenbach, V. K. Lakdawala, R. Germer, G. M. Loubriel, F. J. Zutavern Jan 1989

Gaas Photoconductive Closing Switches With High Dark Resistance And Microsecond Conductivity Decay, M. S. Mazzola, K. H. Schoenbach, V. K. Lakdawala, R. Germer, G. M. Loubriel, F. J. Zutavern

Electrical & Computer Engineering Faculty Publications

Silicon-doped n-type gallium arsenide crystals, compensated with diffused copper, were studied with respect to their application as photoconductive, high-power closing switches. The attractive features of GaAs:Cu switches are their high dark resistivity, their efficient activation with Nd:YAG laser radiation, and their microsecond conductivity decay time constant. In the authors' experiment, electric fields are high as 19 kV/cm were switched, and current densities of up to 10 kA/cm2 were conducted through a closely compensated crystal. At field strengths greater than approximately 10 kV/cm, a voltage `lock-on' effect was observed.

Go to article

Nanosecond Optical Quenching Of Photoconductivity In A Bulk Gaas Switch, M. S. Mazzola, K. H. Schoenbach, V. K. Lakdawala, S. T. Ko Jan 1989

Nanosecond Optical Quenching Of Photoconductivity In A Bulk Gaas Switch, M. S. Mazzola, K. H. Schoenbach, V. K. Lakdawala, S. T. Ko

Electrical & Computer Engineering Faculty Publications

Persistent photoconductivity in copper-compensated, silicon-doped semi-insulating gallium arsenide with a time constant as large as 30 µs has been excited by sub-band-gap laser radiation of photon energy greater than 1 eV. This photoconductivity has been quenched on a nanosecond time scale by laser radiation of photon energy less than 1 eV. The proven ability to turn the switch conductance on and off on command, and to scale the switch to high power could make this semiconductor material the basis of an optically controlled pulsed-power closing and opening switch.

Go to article

An Optically Controlled Closing And Opening Semiconductor Switch, K. H. Schoenbach, V. K. Lakdawala, R. Germer, S. T. Ko Jan 1988

An Optically Controlled Closing And Opening Semiconductor Switch, K. H. Schoenbach, V. K. Lakdawala, R. Germer, S. T. Ko

Electrical & Computer Engineering Faculty Publications

A concept for a bulk semiconductor switch is presented, where the conductivity is increased and reduced, respectively, through illumination with light of different wavelengths. The increase in conductivity is accomplished by electron ionization from deep centers and generation of bound holes. The reduction of conductivity is obtained by hole ionization from the excited centers and subsequent recombination of free electrons and holes. The transient behavior of electron and hole density in a high power semiconductor (GaAs:Cu) switch is computed by means of a rate equation model. Changes in conductivity by five orders of magnitude can be obtained.

Go to article

Semi-Conducting Properties Of Gray Tin As A Laboratory Introduction To Solid State Physics, Glenn F. Powers, Gene E. Louallen, Robert M. Rickett Jan 1958

Semi-Conducting Properties Of Gray Tin As A Laboratory Introduction To Solid State Physics, Glenn F. Powers, Gene E. Louallen, Robert M. Rickett

Journal of the Arkansas Academy of Science

No abstract provided.

Go to article

First Prev