Semiconductor and Optical Materials Commons^™

Journal Of Electrochemistry Is Selected To Entering Ici Journals Master List, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Zhong-Qun Tian, Academician And Honorary Member Of Electrochemistry Committee Chinese Chemical Society, Achieved "Raman Lifetime Award", Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Chinese Chemical Society: First Young Scholars' Symposium On Electrosynthesis Held Successfully, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.

2024 Tianmulake Advanced Anode Materials Innovation Forum And Sixth National Conference Of Advanced Battery Failure Analysis And Testing Technology Concluded Successfully, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Winning Results Of The 2Nd Xiamen University Short Video Abstract Contest For Science And Technology Papers, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

2024 World Fuel Cell Conference Held In Ningbo, Zhejiang, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Rate Law For Photoelectrochemical Water Splitting Over Cuo, Bo-Yuan Gao, Wen-Hua Leng

Journal of Electrochemistry

Photocatalytic splitting of water over p-type semiconductors is a promising strategy for production of hydrogen. However, the determination of rate law is rarely reported. To this purpose, copper oxide (CuO) is selected as a model photocathode in this study, and the photogenerated surface charge density, interfacial charge transfer rate constant and their relation to the water reduction rate (in terms of photocurrent) were investigated by a combination of (photo)electrochemical techniques. The results showed that the charge transfer rate constant is exponential-dependent on the surface charge density, and that the photocurrent equals to the product of the charge transfer rate constant …

Winning Works From Journal Of Electrochemistry: The 2Nd Xiamen University Short Video Abstract Contest For Science And Technology Journal Papers, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

2024 "Electrochemical Research Paradigms" Summer School Successfully Held, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Upcoming Meeting-The 1St Young Investigator Symposium On Electrosynthesis, Chinese Chemical Society, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.

Secondary Electron Yield Of Metals, Alloys, And Metal Oxides From First Principles Based Monte Carlo Simulations, Raul E. Gutierrez

Electrical and Computer Engineering ETDs

Density Functional Theory (DFT) based Monte Carlo (MC) simulations of the Sec-
ondary Electron Yield (SEY) of metals, alloys, and metal oxides are performed to
find material properties that could help reduce or influence the multipactor effect.
In order to accurately model the SEY of materials, knowledge of the frequency- and
momentum-dependent Energy Loss Function (qDepELF) is required. The qDepELF
is difficult to determine from experiment; however, it can be calculated from first
principles. The DFT-MC approach for simulating the secondary electron genera-
tion, propagation, and emission processes is described herein. Material properties,
which are calculated using DFT and used …

Fabrication And Characterization Of A Monolithic Photonic Integrated Circuit With High-Aspect Ratio Photonic Device Structures, Sami A. Nazib

Optical Science and Engineering ETDs

The focus of this work was to create a process to fabricate an InP-based Photonic Integrated Circuit (PIC). The design of the PIC required the photonic components of this device to be created by deep etching of an epitaxially-grown multilayer structure. Therefore, a novel dry etching process was developed to produce very high aspect- ratio (HAR) features. This process not only involved the development of dry etch chemistry but also the engineering of a metal mask structure. The next step of the challenge was to use a polymer-based material that would have two functions: cladding for the etched photonic components …

First Announcement Of 76th Annual Meeting Of The International Society Of Electrochemistry, International Society Of Electrochemistry (Ise)

Journal of Electrochemistry

No abstract provided.

In Situ Diffuse Reflectance Spectroelectrochemistry Of Cathode Materials In Lithium-Ion Batteries, Lu-Lu Chen, Hao-Ran Li, Wei-Yi Liu, Wei Wang

Journal of Electrochemistry

Developing in situ spectroelectrochemistry methods, which can provide detailed information about species transformation during electrochemical reactions, is very important for studying electrode reaction mechanisms and improving battery performance. Studying real-time changes in the surface of electrode materials during normal operation can be an effective way to assess and optimize the practical performance of electrode materials, thus, in situ and in operando characterization techniques are particularly important. However, batteries are hard to be studied by in situ characterization measurements due to their hermetically sealed shells, and there is still much room for battery characterizations. In this work, a specially designed battery …

Influence Of Al2o3 Passivation Layer Thickness On The Thermal Stability And Quality Of Mocvd-Grown Gan On Si, S M Atiqur Rahman, Manika Tun Nafisa, Zhe Chuan Feng, Benjamin Klein, Ian T. Ferguson

Symposium of Student Scholars

This research delves into the significant impact of varying thicknesses of the Al₂O₃ passivation layer on the thermal stability and crystalline quality of GaN on Si structures, an essential aspect for the next generation of high-temperature electronic and optoelectronic devices. By adopting metal-organic chemical vapor deposition (MOCVD) for the growth process, we analyzed structures with different Al₂O₃ passivation layer thicknesses: none, 2 nm, 10 nm, and 20 nm, each built upon the GaN layer. Through Raman spectroscopy, we meticulously assessed the changes in the E₂ (High) phonon mode's peak position and full width …

Reducing Switching Noise And Losses In Two-Stage Electric Power Converters, Abhijeet Prem

Student Research Symposium

Advancements in semiconductor devices are enabling the design of better electrical power converter systems. Wide Bandgap (WBG) switching devices from Silicon Carbide and Gallium Nitride can operate at high temperatures, voltages, and frequencies with faster turn-on/off periods, improving converter performance over silicon devices. However, WBG technology is still new, and the rapid switching transitions of these devices lead to issues such as voltage overshoots, ringing, and electromagnetic interference, which need to be addressed for widespread adoption. This work introduces a new control method for reshaping the switching voltages, which overcomes the disadvantages of fast transition time without increasing the system's …

Recent Advances In Solar Photo(Electro)Catalytic Nitrogen Fixation, Jun-Bo Ma, Sheng Lin, Zhiqun Lin, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Ammonia (NH₃) is an essential chemical in modern society. It is currently produced in industry by the Haber-Bosch process using H₂ and N₂ as reactants in the presence of iron-based catalysts at high-temperature (400–600 ^oC) and extremely highpressure (20–40 MPa) conditions. However, its efficiency is limited to 10% to 15%. At the same time, a large amount of energy is consumed, and CO₂ emission is inevitably. The development of a sustainable, clean, and environmentally friendly energy system represents a key strategy to address energy crisis and environmental pollution, ultimately aiming to achieve carbon neutrality. …

Effect Of Fabrication Parameters On The Ferroelectricity Of Hafnium Zirconium Oxide Films: A Statistical Study, Guillermo A. Salcedo, Ahmad E. Islam, Elizabeth Reichley, Michael Dietz, Christine M. Schubert Kabban, Kevin D. Leedy, Tyson C. Back, Weison Wang, Andrew Green, Timothy S. Wolfe, James M. Sattler

Faculty Publications

Ferroelectricity in hafnium zirconium oxide (Hf_1−xZr_xO₂) and the factors that impact it have been a popular research topic since its discovery in 2011. Although the general trends are known, the interactions between fabrication parameters and their effect on the ferroelectricity of Hf_1−xZr_xO₂ require further investigation. In this paper, we present a statistical study and a model that relates Zr concentration (x), film thickness (t_f), and annealing temperature (T_a) with the remanent polarization (P_r) in tungsten (W)-capped Hf_1−xZr_xO₂. …

Enhancing Electromigration Reliability In Solder Interconnects Through Microstructure Control And Thermomechanical Failure Mechanisms In Thin Metal Lines Under Surge Current Conditions, Hariram Mohanram

Material Science and Engineering Dissertations - Archive

The relentless miniaturization of semiconductor devices has intensified reliability challenges in electronic packaging, particularly for solder interconnects and thin metal lines. This dissertation investigates two critical failure mechanisms—electromigration (EM) and thermomechanical fatigue (TMF)—and explores strategies to mitigate these effects. Electromigration, driven by high-density current-induced atomic migration, significantly impacts solder interconnects. This study examines the role of Under-Bump Metallization (UBM) and solder microstructure in improving EM reliability. Findings reveal that thicker UBMs delay void nucleation and enhance EM resistance, while the absence of UBM leads to failure through vertical void propagation. Additionally, grain orientation, particularly the c-axis alignment in Sn grains, …

Nano-Patterned Si Structures For Optical Filters And Electro-Mechanical Relays: Fabrication, Characterization, Prospects, And Limitations, Md Ataul Mamun

Theses and Dissertations

Nanofabrication technology, especially nanopatterning, is a rapidly advancing field that has already resulted in creating novel devices and holds promise for producing even more with unmatched performance. These techniques also allow us to gain insight into physical phenomena at the micro- and nanoscale. The ultimate performance of nanofabricated devices and their compatibility with existing Si-based CMOS technology hinge upon the careful selection of materials and precise design, coordinated with meticulous pattern transfer. In this work, we applied nanopatterning techniques on silicon to create optical filters for the shortwave infrared (SWIR) region and nanoelectromechanical system (NEMS) relay-based logic gates. Additionally, these …

Fabrication Of Smooth Sac305 Thin Film Via Magnetron Sputtering, M. Ojha, A. A. Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

SAC305 (96.5 wt% Sn, 3 wt% Ag, 0.5 wt%Cu) solder is increasingly becoming popular due to its reliability good characteristics and performance in addition to the environmental concerns and regulations that restrict the use of lead in nano/microelectronic products. In nano/microelectronics, manufacturing smooth solder coatings free of defects such as voids and cracks, which can compromise joint reliability is crucial. Magnetron sputtering offers a high degree of control over film thickness and composition, resulting in films with excellent uniformity and adhesion. Despite these advantages, fabricating continuous and robust SAC305 films using magnetron sputtering remains a difficult task with limited research …

Photoluminescence Of Beryllium-Related Defects In Gallium Nitride, Mykhailo Vorobiov, Mykhailo Vorobiov

Theses and Dissertations

This study explores the potential of beryllium (Be) as an alternative dopant to magnesium (Mg) for achieving higher hole concentrations in gallium nitride (GaN). Despite Mg prominence as an acceptor in optoelectronic and high-power devices, its deep acceptor level at 0.22 eV above the valence band limits its effectiveness. By examining Be, this research aims to pave the way to overcoming these limitations and extend the findings to aluminum nitride and aluminum gallium nitride (AlGaN) alloy. Key contributions of this work include. i)Identification of three Be-related luminescence bands in GaN through photoluminescence spectroscopy, improving the understanding needed for further material …

Effect Of Annealing On Photoluminescence From Defects In Gan, Oleksandr Andrieiev

Theses and Dissertations

Annealing is a critical process in modern GaN technology, essential for achieving p-type conductivity by activating the Mg_Ga acceptor, as first demonstrated by Shuji Nakamura in the early 1990s. Despite the omnipresence of hydrogen as an impurity in GaN crystals, the precise mechanisms governing hydrogen diffusion and acceptor passivation remain only partially understood. The presented research investigates the effects of annealing-induced activation and hydrogen passivation on C and Be acceptors in GaN grown by MOCVD, HVPE, and MBE methods. We explored these effects by using several annealing techniques, gas compositions, and thermal regimes. A transient behavior between the C …

Natural Convection Heat Transfer Characteristics Of Sierpinski Carpet Fractal Fins In Horizontal And Vertical Orientations, Ayomide Ayoola

College of Graduate Studies: Theses & Dissertations

This study investigates the thermal performance of fins with perforations inspired by the Sierpinski carpet fractal pattern under natural convection conditions in both vertical and horizontal orientations. The objective is to analyze the effects of fractal iteration levels on three primary performance metrics: efficiency, effectiveness, and effectiveness per unit mass. Experimental evaluations were conducted for fractal fins from iterations 0 through 4, utilizing aluminum material, with each fin heated to controlled conditions. The results reveal that efficiency generally decreases with higher fractal iterations, reflecting increased thermal resistance associated with greater porosity and complex geometry. However, effectiveness per unit mass improves …

Design, Fabrication And Characterization Of Zero Power Sensor/Harvester For Smart Grid Applications, Zeynel Guler

Mechanical Engineering ETDs

This study presents a flexible sensor/harvester device to be used in both electromagnetic sensing and energy harvesting applications for smart grids. When a current passes through a wire, the sensor detects the magnetic field created by that current. The sensor magnet interacts with the wire magnetic field resulting in a transfer of energy through the piezoelectric cantilever. Piezoelectric, conductive, magnetic, and magnetostrictive composite thin films were prepared to fabricate this device.

Initially, the magnet of the cantilever was optimized considering its shape, thickness, length, taper angle etc. via both simulations and experiments. Peak to peak voltage versus cantilever position graph …

Carrier Dynamics In Green Iii-Nitride Leds Using Small-Signal Electroluminescence, Xuefeng Li

Optical Science and Engineering ETDs

Solid-state lighting has achieved significant success over the past two decades, but the low quantum efficiency of green LEDs (i.e., the “green gap”) remains a barrier to full red-green-blue (RGB) displays in numerous applications. Combating efficiency reduction in longer-wavelength LEDs requires understanding the relative roles of intrinsic effects (e.g., wave-function overlap, carrier-current density relationship, phase-space filling (PSF)) vs. extrinsic effects (e.g., material degradation due to increased defect density, compositional inhomogeneities, etc.). A systematic study of the carrier dynamics in InGaN/GaN LEDs is very important for understanding the origin of the green gap and for providing solutions to improve the efficiency …

Characterization Analysis And Design Of Mid-Wave Infrared Iii- V-Based Type-Ii Superlattice Nbn Photodetectors For Space Applications, Alexander Timothy Newell

Electrical and Computer Engineering ETDs

The performance of the mid-wave infrared InGaAs/InAsSb nBn photodetector is investigated and its viability for space applications is assessed. Three structures are grown with unique absorber layer doping profiles via molecular beam epitaxy. Material and device characterizations are performed and analyzed to determine the effects of doping on fundamental material parameters and detector performance. Noise-equivalent irradiance is calculated to be a factor of 4x that of an ideal detector exhibiting Rule 07 dark current and 100% quantum efficiency, demonstrating high sensitivity. The structures are then irradiated with 63 MeV protons to evaluate the extent of performance degradation over the course …

Impact Of Silicon Ion Irradiation On Aluminum Nitride-Transduced Microelectromechanical Resonators, David D. Lynes, Joshua Young, Eric Lang, Hengky Chandrahalim

Faculty Publications

Microelectromechanical systems (MEMS) resonators use is widespread, from electronic filters and oscillators to physical sensors such as accelerometers and gyroscopes. These devices' ubiquity, small size, and low power consumption make them ideal for use in systems such as CubeSats, micro aerial vehicles, autonomous underwater vehicles, and micro-robots operating in radiation environments. Radiation's interaction with materials manifests as atomic displacement and ionization, resulting in mechanical and electronic property changes, photocurrents, and charge buildup. This study examines silicon (Si) ion irradiation's interaction with piezoelectrically transduced MEMS resonators. Furthermore, the effect of adding a dielectric silicon oxide (SiO₂) thin film is …

Effects Of Traps On Photo-Induced Interfacial Charge Transfer Of Ag-Tio2: Photoelectrochemical, Electrochemical And Spectroscopic Characterizations, Zhi-Hao Liang, Jia-Zheng Wang, Dan Wang, Jian-Zhang Zhou, De-Yin Wu

Journal of Electrochemistry

In the field of metal-semiconductor composites based plasmon-mediated chemical reactions, a clear and in-depth understanding of charge transfer and recombination mechanisms is crucial for improving plasmonic photocatalytic efficiency. However, the plasmonic photocatalytic reactions at the solid-liquid interface of the electrochemical systems involve complex processes with multiple elementary steps, multiple time scales, and multiple controlling factors. Herein, the combination of photoelectrochemical and electrochemical as well as spectroscopic characterizations has been successfully used to study the effects of traps on the photo-induced interfacial charge transfer of silver-titanium dioxide (Ag-TiO₂). The results show that the increase of surface hydroxyl groups may …

Integrating Sensor Development, Risk Assessment, And Community Engagement To Support Environmental Justice In The Rural Community Of El Tiple, Colombia, David Bahamon Pinzon

All Dissertations

In Colombia, ethnic communities have traditionally been responsible stewards of natural resources. They recognize the importance of these resources for their livelihood, as well as their ancestral and cultural heritage. El Tiple, a rural Afro-Colombian community, has been affected by the incursion of private corporations that promoted the expansion of sugarcane monocrops in their territory. Since the introduction of the monoculture industry, local freshwater sources have been depleted due to intensive water use for irrigation of the sugarcane crops. Additionally, the intensive usage of agrochemicals has been linked with loss of native flora, damages to family farms, and pollution of …