Open Access. Powered by Scholars. Published by Universities.®

Semiconductor and Optical Materials Commons™

Open Access. Powered by Scholars. Published by Universities.®

Chemistry

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 121 - 149 of 149

Full-Text Articles in Semiconductor and Optical Materials

Preparation And Optical Transmission Of The Zno Nanorod Array Films, Feng Ye, Jing-Jing Li, Tong-Tao Wang, Yong-Liang Wang, Yun Liu, Xin-Dong Wang Nov 2008

Preparation And Optical Transmission Of The Zno Nanorod Array Films, Feng Ye, Jing-Jing Li, Tong-Tao Wang, Yong-Liang Wang, Yun Liu, Xin-Dong Wang

Journal of Electrochemistry

By using a galvaostatic electrodeposition method in the ZnCl2 solution,the highly oriented ZnO nanorod array films have been successfully prepared on ITO substrate after the pretreatment with ZnO nanoparticles.And they were characterized by scanning electron microscope,X-ray diffraction and transmittance spectra.The results indicated that the ZnO nanorod arrays grew along(001) direction with an orientation perpendicular to the substrate.When the wavelength of incident was over 380 nm,the ZnO nanorod arrays showed high optical transmission of above 95%.Furthermore,the band gap became narrower.

Go to article

Preparation And Photoelectrochemical Properties Of Fe-Doped Tio2 Nanotube Arrays, Jing Li, Lan Sun, Hui-Fang Zhuang, Cheng-Lin Wang, Rong-Gui Du, Chang-Jian Lin May 2008

Preparation And Photoelectrochemical Properties Of Fe-Doped Tio2 Nanotube Arrays, Jing Li, Lan Sun, Hui-Fang Zhuang, Cheng-Lin Wang, Rong-Gui Du, Chang-Jian Lin

Journal of Electrochemistry

The Fe-doped TiO2 nanotube arrays were fabricated in Fe(NO3)3-HF mixing solutions by electrochemical anodic oxidation method,and characterized by FESEM,Raman,XPS and DRS.The effect of Fe concentratiions on photoelectrochemical property of the arrays was also investigated.The diameters and lengths of Fe-doped TiO2 nanotube arrays were 50~90 nm and about 200 nm,respectively.Compared with the undoped TiO2 nanotube arrays,the absorption edge of Fe-doped TiO2 nanotube arrays appeared red shifting.The more Fe content,the larger red shifting,in addition,the photocurrent of Fe-doped TiO2 nanotube arrays increased obviously.

Go to article

Activation Energy Of Surface Diffusion And Terrace Width Dynamics During The Growth Of In (4×3) On Si (100) - (2×1) By Femtosecond Pulsed Laser Deposition, M. A. Hafez, H. E. Elsayed-Ali Jan 2008

Activation Energy Of Surface Diffusion And Terrace Width Dynamics During The Growth Of In (4×3) On Si (100) - (2×1) By Femtosecond Pulsed Laser Deposition, M. A. Hafez, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The nucleation and growth of indium on a vicinal Si (100) - (2×1) surface at high temperature by femtosecond pulsed laser deposition was investigated by in situ reflection high energy electron diffraction (RHEED). RHEED intensity relaxation was observed for the first ∼2 ML during the growth of In (4×3) by step flow. From the temperature dependence of the rate of relaxation, an activation energy of 1.4±0.2 eV of surface diffusion was determined. The results indicate that indium small clusters diffused to terrace step edges with a diffusion frequency constant of (1.0±0.1) × 1011 s-1. The RHEED specular …

Go to article

Formation Of In- (2×1) And In Islands On Si (100) - (2×1) By Femtosecond Pulsed Laser Deposition, M. A. Hafez, H. E. Elsayed-Ali Jan 2007

Formation Of In- (2×1) And In Islands On Si (100) - (2×1) By Femtosecond Pulsed Laser Deposition, M. A. Hafez, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The growth of indium on a vicinal Si (100) - (2×1) surface at room temperature by femtosecond pulsed laser deposition (fsPLD) was investigated by in situ reflection high-energy electron diffraction (RHEED). Recovery of the RHEED intensity was observed between laser pulses and when the growth was terminated. The surface diffusion coefficient of deposited In on initial two-dimensional (2D) In- (2×1) layer was determined. As growth proceeds, three-dimensional In islands grew on the 2D In- (2×1) layer. The RHEED specular profile was analyzed during film growth, while the grown In islands were examined by ex situ atomic force microscopy. The full …

Go to article

Application Of Electrolessplating Technology In Interconnection Manufacturing Of Ultralarge-Scale Integration, Zeng-Lin Wang, Zhi-Juan Liu, Hong-Yan Jiang, Xiu-Wen Wang, Shingubara Shoso May 2006

Application Of Electrolessplating Technology In Interconnection Manufacturing Of Ultralarge-Scale Integration, Zeng-Lin Wang, Zhi-Juan Liu, Hong-Yan Jiang, Xiu-Wen Wang, Shingubara Shoso

Journal of Electrochemistry

In this paper,research progresses in electroless plating for damascene copper process were reviewed.Electroless nickel ternary alloy deposition for barrier layer and electroless copper plating for seed layer were presented.Bottom-up copper fill high-aspect-via-hole and electroless plating after ICB-Pd catalytic layer for seed layer were mainly introduced.The applications of electroless plating in ultralarge-scale integration were discussed,and the developing tendency was also suggested.

Go to article

Special Photoelectrochemical Response Of Nano-Crystalline Tio2 Electrode, Bi-Bo Lan, Jian-Zhang Zhou, Yan-Yan Xi, Hong-Xiang Chen, Guang-Hua Yao, Zhong-Hua Lin Feb 2006

Special Photoelectrochemical Response Of Nano-Crystalline Tio2 Electrode, Bi-Bo Lan, Jian-Zhang Zhou, Yan-Yan Xi, Hong-Xiang Chen, Guang-Hua Yao, Zhong-Hua Lin

Journal of Electrochemistry

The nano-crystalline TiO2 electrodes were prepared by spread method,electrodeposition and sol-gel method.The experimental results show that the nano-crystalline TiO2 electrodes have special photoelectrochemical response-the photocrrent-potential curves appear peaks.The special photoelectrochemical behaviors of nano-(crystalline) TiO2  electrodes are ascribed to nano-structure as well as special light induced redox reaction mechanism of nano-crystalline semiconductor electrodes.

Go to article

Growth Of Ge Quantum Dots On Si(100)-(2×1) By Pulsed Laser Deposition, M. S. Hegazy, H. E. Elsayed-Ali Jan 2006

Growth Of Ge Quantum Dots On Si(100)-(2×1) By Pulsed Laser Deposition, M. S. Hegazy, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Self-assembled germanium quantum dots (QDs) were grown on Si(100)-(2×1) by pulsed laser deposition. In situ reflection-high energy electron diffraction (RHEED) and postdeposition atomic force microscopy are used to study the growth of the QDs. Several films of different thicknesses were grown at a substrate temperature of 400 °C using a Q-switched Nd:yttrium aluminum garnet laser (λ= 1064 nm, 40 ns pulse width, 23 J/cm 2 fluence, and 10 Hz repetition rate). At low film thicknesses, hut clusters that are faceted by different planes, depending on their height, are observed after the completion of the wetting layer. With increasing film thickness, …

Go to article

Using Electrodeposition To Fabricate Mould For Polymer Microfluidic Chip, Yi Luo, De-Nan Chu, Zhi-Feng Lou, Chong Liu, Li-Ding Wang May 2005

Using Electrodeposition To Fabricate Mould For Polymer Microfluidic Chip, Yi Luo, De-Nan Chu, Zhi-Feng Lou, Chong Liu, Li-Ding Wang

Journal of Electrochemistry

Many researches have been focused on polymer microfluidic chip in recent years and the mould plays an important role in its fabrication process. Using electrodepositingmethod to fabricate a metal mould for polymer microfluidic chip has been presented in this paper. An ultra-thick photoresist SU-8 was coated on a pretreated metal plate, after photolithography, nickel was electrodeposited in the patterned SU-8, then was removed the SU-8 to obtain a final metal mould. This methodreduces workload of electrodeposit largely. Applying counter current before deposit, adding additive to solution and vacuum anneal after demould have been used to improve the binding force between …

Go to article

Studies Of Infrared Optical Properties Of Palladium Nanoparticles With Different Sizes And Dispersed States, Yan-Xia Jiang, Hong-Gang Liao, Wei Chen, Shi-Gang Sun May 2004

Studies Of Infrared Optical Properties Of Palladium Nanoparticles With Different Sizes And Dispersed States, Yan-Xia Jiang, Hong-Gang Liao, Wei Chen, Shi-Gang Sun

Journal of Electrochemistry

Pd nanoparticles with different sizes and dispersed states were prepared. Their infrared optical properties were studied with CO molecule probe. The infrared spectroscopic investigation revealed that Pdn of 6.6 nm and Pdn(cube)of 100～150nmexhibit normal IR absorption. The center of IR bands are around 1970 cm-1 and 1910cm-1. Pdnis introduced into the surface of electrode, and is induced by interface electric fieldto form the aggregation of nanoparticles Pdn(ag). The Pdn(ag) has a different IR optical property from Pdn. The direction of IR absorption band of Pdn …

Go to article

Preparation And Optical Properties Of Highly Ordered Cds Nanowire Arrays, Lan Sun, Chang-Jian Lin May 2004

Preparation And Optical Properties Of Highly Ordered Cds Nanowire Arrays, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Highly ordered CdS nanowire arrays have been prepared by using dc electrodeposition in the porous anodic aluminum oxide template. Scanning electro microscopy (SEM) and transmission electron microscopy (TEM) reveal that the nanowires are uniform and highly ordered. The measurements of X-ray diffraction and high-resolved electron microscopy (HRTEM) show that the nanowires are hexagonal structure with the crystallographic c-axis preferentially oriented along the length of the pore. The UV-Vis absorption spectra of CdS nanowire arrays show that the absorption edges of the nanowire arrays shift towards short wavelength with the decrease of the nanowire size. The photoluminescence measurements show that the …

Go to article

Preparation, Characterization And Photoelectrochemical Activities Of Cu-Tio2/Ito Films, Dong Shu, Chun He, Han-Xia Zhang, Ya Xiong May 2004

Preparation, Characterization And Photoelectrochemical Activities Of Cu-Tio2/Ito Films, Dong Shu, Chun He, Han-Xia Zhang, Ya Xiong

Journal of Electrochemistry

Cu-TiO2/ITO films were prepared by direct photo-reduction deposition of Cu2+ on TiO2/ITO films. The nanocomposite films were characterized by UV-vis diffuse reflectance spectra (DRS), XRD spectra, Scanning Electron Microscope (SEM) technology, and photovoltage measurement. The feasibility of improving the photocatalytic activity of TiO2 film by combining the modification of Cu nanoparticles with the application of anodic bias was investigated. The experimental results showed that the deposited Cu has an apparent enhancement effect with respect to suppressing the recombination between the photogenerated charge carriers and enhancing the photocatalytic oxidation of formic acid. The combination could …

Go to article

Pure Iron Electrolyzed From Scrap Iron Chips And Its Corrosion Characteristics, Wei-Min Cao, Ren-He Yin, Hui-Ceng Yan, Zhi-Qiang Ye Feb 2003

Pure Iron Electrolyzed From Scrap Iron Chips And Its Corrosion Characteristics, Wei-Min Cao, Ren-He Yin, Hui-Ceng Yan, Zhi-Qiang Ye

Journal of Electrochemistry

The high purity electrolytic iron was made from scrap iron chips. Electrolytic conditions of pure iron were determined in chloride baths and the highest purity was 99.983% by chemical analysis. Pure iron had very compact texture and high mechanical strength by SEM figures of cross section. In deaerated 0.5 kmol·m-3 H2SO4 and 0.5 kmol·m-3 NaCl solutions, the corrosion rate of iron decreased with increasing purity.

Go to article

Photoelectrochemistry Of La3+ Doped Semiconductor Porous Films Sensitized By Ru(Bpy)2(Ncs)2 Dye, Li Zhang, Yan-Jie Ren, Sheng-Min Cai Feb 2002

Photoelectrochemistry Of La3+ Doped Semiconductor Porous Films Sensitized By Ru(Bpy)2(Ncs)2 Dye, Li Zhang, Yan-Jie Ren, Sheng-Min Cai

Journal of Electrochemistry

The La3+-doped TiO2 nanoparticles were prepared with hydrothermal method.The photoelectrochemical properties of La3+-doped TiO2 nanoporous-film electrode sensitized by Ru(bpy)2(NCS)2 were studied. The conversion efficiency of light to electricity and the energy conversion efficiencies were ineased with the depth of La3+-doped TiO2 nanoporous-film electrode.

Go to article

The Effect Of Preparation Condition On The Photoelectrochemical Performance Of Both The Pani Film And Tio2-Pani Composite Film On Au, Huai-Guo Huang, Hong-Ping Zhang, Zhi-Xin Zheng, Yan-Yan Xi, Ling-Ling Wu, Zhong-Hua Lin May 2001

The Effect Of Preparation Condition On The Photoelectrochemical Performance Of Both The Pani Film And Tio2-Pani Composite Film On Au, Huai-Guo Huang, Hong-Ping Zhang, Zhi-Xin Zheng, Yan-Yan Xi, Ling-Ling Wu, Zhong-Hua Lin

Journal of Electrochemistry

Both the PANI (polyaniline) film and TiO2-PANI composite film on the PATP(paminothiophenol)/Au substrate were obtained under different preparation condition by electrochemical methods, and their photoelectrochemical performances were alo studied. The resultsshowed that the photoelectrochemical performances of the films depend deeply on the comditionsof preparation. The self-assembling of PATP favors the adhesion of PANl. The partially-oxidizedPANI has a greater photoelectrochemical response than that of the reduced PANI and oxidized PANl. There is an optimum of film thickness for the photoelectrochemical performance of PANI film. Heat treating is in favor of the photoelectrochemical performance of TiO2, but decreases …

Go to article

The Photoelectrochemistry Of Tio2-Polyaniline Composite Film, Huai-Guo Huang, Zhi-Xin Zheng, Jin Luo, Hong-Ping Zhang, Ling-Ling Wu, Zhong-Hua Lin Feb 2001

The Photoelectrochemistry Of Tio2-Polyaniline Composite Film, Huai-Guo Huang, Zhi-Xin Zheng, Jin Luo, Hong-Ping Zhang, Ling-Ling Wu, Zhong-Hua Lin

Journal of Electrochemistry

A TiO2 and polyaniline (PANI) composite film was obtained by electrochemical methods. The SEM image of the composite film showed that the PANI film is almost completely covered with TiO2 efficiency. The spectra of photocurrent for the TiO2-PANI composite film were different from these of TiO2 film photosensitized by PANI. The bandgap energy of TiO2 film on partially oxidized PANI film was determined as 3.0 eV by the threshold energy of photocurrent band for TiO2. The spectra of photocurrent for partially oxidized PANI film electrode suggested that it has the characteristics of …

Go to article

A Study Of Monitoring Corrosion Of Metal Via An Optic Waveguide Sensing Method, Xue-Ming Li, Wei-Ming Chen, Shang-Lian Huang, Na Zhang, Zong-Qing Huang Nov 2000

A Study Of Monitoring Corrosion Of Metal Via An Optic Waveguide Sensing Method, Xue-Ming Li, Wei-Ming Chen, Shang-Lian Huang, Na Zhang, Zong-Qing Huang

Journal of Electrochemistry

An optical wave guide sensing method was proposed for monitoring corrosion of metal in outdoors steel structures. Replacing the cladding of wave-guide with metal film in a particular location, the method takes the metal film as the corrosion sensitive film. The experiment of waveguide sensor was carried out on a 721 colorimetric vessel, with which the soution is held in itself and the light is propagated in its sidewall. A Fe-C alloy film was electroplated onto the inner sied of vessel to form the corrosion sensitive film. The structure of the Fe-C alloy film was studied by XRD, EDX and …

Go to article

Photoelectrochemical Studies On The Tio2 Nanostructured Porous Film Sensitized By Cyanine Dye, Li Zhang, Mai-Zhi Yang, Xue-Bin Qiao, Yan-Zhong Hao, En-Qing Gao, Sheng-Min Cai Nov 1999

Photoelectrochemical Studies On The Tio2 Nanostructured Porous Film Sensitized By Cyanine Dye, Li Zhang, Mai-Zhi Yang, Xue-Bin Qiao, Yan-Zhong Hao, En-Qing Gao, Sheng-Min Cai

Journal of Electrochemistry

The photoelectrochemical behaviors of the TiO2 nanostructured porous film sensitized by cyanine dye were investigated in this paper. The results showed that the excitaed state level matched the conduction band edge of TiO2 nanoparticle. Therefore the sensitization of the dye can increase the photocurrent intensity of the TiO2 nanostructured electrode obviously and results in a red-shift of optical absorption from the ultra-violet region to the visible. As a result, the light-to-electricity conversion efficiency was improved evidently, the maximum value of IPCE has reached 12.1%.

Go to article

Photoelectrochemical Studies On Nanoporous Tio2/Pan Film Electrode, Min-Sheng Liu, Yan-Zhong Hao, Xue-Bin Qiao, Mai-Zhi Yang, Sheng-Min Cai Aug 1998

Photoelectrochemical Studies On Nanoporous Tio2/Pan Film Electrode, Min-Sheng Liu, Yan-Zhong Hao, Xue-Bin Qiao, Mai-Zhi Yang, Sheng-Min Cai

Journal of Electrochemistry

The photon to electricity conversion process of nanoporous TiO2/PAn film electrode was studied in electrolytes with and without redox couple by using the photocurrent action spectra and potential dependence of photocurrent. It is concluded that the nanoporous TiO2/PAn film electrode has a structure of duplex n type semiconductor layers. The band gap of PAn film is 2.88eV.The TiO2 nanoporous film electrode modified by PAn can extend the range of optical absorption into visible and infrared region and effectively increase the photocurrent in the visible and infrared region. The photocurrent threshold shifts to>600nm and conversion …

Go to article

The Investigations Of Surface Treatment Methods And Characterization Of Oxide Films On Ab5 Based Metal Hydride Electrodes Ⅰ. New NiRich Treatment Methods And Photoelectrochemical Characterization Of Oxide Films, Junmin Nan, Yong Yang, Jun Li, Zugeng Lin Feb 1998

The Investigations Of Surface Treatment Methods And Characterization Of Oxide Films On Ab5 Based Metal Hydride Electrodes Ⅰ. New NiRich Treatment Methods And Photoelectrochemical Characterization Of Oxide Films, Junmin Nan, Yong Yang, Jun Li, Zugeng Lin

Journal of Electrochemistry

Two simple and efficient surface treatment methods for AB5 type hydrogen storage alloys were developed. The results of X-ray photoelectron spectroscopy (XPS) and cyclic voltammetric (CV) experiments showed that the hydrogen storage alloys treated by two different methods had Ni rich surface layer so that the performances of the electrodes were improved after treatment. The characterization of the oxide films which formed on the surface of electrodes through potentiodynamic oxidation with the help of photoelectrochemical microscopy (PEM) were done. The anodic photocurrent and the cathodic photocurrent related to the oxidation of hydrogen and the reduction of oxygen on the …

Go to article

Photoluminescence Of Photoelectrochemically Etched N+-Si, Guozheng Li, Chengqian Zhang, Xiumei Yang Nov 1997

Photoluminescence Of Photoelectrochemically Etched N+-Si, Guozheng Li, Chengqian Zhang, Xiumei Yang

Journal of Electrochemistry

PS layer on n+-Si with (111) orientation prepered by means of photoelectrochemically etched has photo-luminescent (PL) ability like PS layer on usual n-Si. The data of PL spectra and quenching are given.

Go to article

Electroluminescence Of Photoelectrochemically Etched N+-Si, Guozheng Li, Chengqian Zhang, Xiumei Yang May 1997

Electroluminescence Of Photoelectrochemically Etched N+-Si, Guozheng Li, Chengqian Zhang, Xiumei Yang

Journal of Electrochemistry

Porous silicon with micrometer size pores, which is made on n+-Si by photoelectrochemically etched, has electroluminescent property. Each monochromic intensity and wavelength range of luminescent spectra depend on polarized potential. The intersity and the stability of cathodic electroluminescence is high than those of anodic one. Voltammetric behavior before quenching indicated that the electrochemical reactions of some surface species are involved in except the reduction of S2O82-, which leads to radiative recombination. The energy band diagram based on n+-Si(Eg=1.1 eV)/PS(Eg=1.8 eV) junction is proposed.

Go to article

Preparation Of Powder Precursors And Evaporation Of Photoconductive Indium Sulfide Films, Chris Barber, Robert Engelken, Brandon Kemp, Wasim Aleem, Imran Khan, Chris Edrington, Michael Buck, Clayton Workman, Anup Thapa, Tom Jakobs Jan 1997

Preparation Of Powder Precursors And Evaporation Of Photoconductive Indium Sulfide Films, Chris Barber, Robert Engelken, Brandon Kemp, Wasim Aleem, Imran Khan, Chris Edrington, Michael Buck, Clayton Workman, Anup Thapa, Tom Jakobs

Journal of the Arkansas Academy of Science

We have demonstrated significant photoconductance in indium sulfide thin films prepared by thermal vacuum evaporation ofIn2$3 powders synthesized in-house by chemical precipitation ofInCl3 or In(CH3COO)3, and (NH4)2S or Na2S. The Delta G lambda/Gdark values have been as high as 0.1 in the initial unoptimized films. Excess sulfur (via a mixture of polysulfide and sulfide ions in the synthesis bath) appears to be important in achieving reproducible and large photoconductivities. In2S3 is particularly attractive as a lower toxicity alternative to CdS in optoelectronic applications such as photovoltaic and photoconductive cells.

Go to article

The Reduction Of Oxygen To Hydrogen Peroxide In An Acidic Trickle Bed Cell Using Graphite Chip Cathode, Zhaoe Lu, Guanyong Zhang, Tiangeng Zhong, Guonu Fang May 1996

The Reduction Of Oxygen To Hydrogen Peroxide In An Acidic Trickle Bed Cell Using Graphite Chip Cathode, Zhaoe Lu, Guanyong Zhang, Tiangeng Zhong, Guonu Fang

Journal of Electrochemistry

The authors investigated the electrochemical reduction of oxygen to hydrogen peroxide in 0.05 mol/L H2SO4 solution by the trickle bed electrode using graphite chip. The bed dimension was 14×5×0.6 cm. The current efficiency and the concentration of H2O2 in the catholyte were determined at various current strengths and various rates of adding the electrolyte. The proper current was 0.15 A. i.e. the current density was 2.1 mA/cm2 vertical cross section area of the bed. The concentration of H2O2 reached 7×10-3 mol/L with the current efficiency of 0.2. If the …

Go to article

A Photoelectrochemical Investigation Of A.C.Modulated Passive Films On 304 Stainless Steel In Weak-Alkaline And Neutral Solution, Tianbao Du, Chunan Cao, Jiakang Yu, Haichao Lin Nov 1995

A Photoelectrochemical Investigation Of A.C.Modulated Passive Films On 304 Stainless Steel In Weak-Alkaline And Neutral Solution, Tianbao Du, Chunan Cao, Jiakang Yu, Haichao Lin

Journal of Electrochemistry

A photoelectrochemical investigation has been carried out on AISI 304 stainless steeI AV modulated passive film in 0.1mol/L Na2B4O7 and 0.5 mol/L Na2SO4 solution. Photo current curve depends on the potential, passive condition and testing solutions. The results of the measurements indicate that the photoresponse is determined by the defects in the electronic structure of the films whenthe defects lead to localized states in the bandgap region. It is concluded that the passive film on AISI 304 stainless steel is in a highly disordered amorphous state.

Go to article

The Photoelectrochemical Studies Of Passive Films On Rebar Electrodes In Simulated Cement Pore Solution, Wei Chu, Yuanxiang Shi, Baoming Wei, Yong Yang, Xuguang Chen, Zugeng Lin Aug 1995

The Photoelectrochemical Studies Of Passive Films On Rebar Electrodes In Simulated Cement Pore Solution, Wei Chu, Yuanxiang Shi, Baoming Wei, Yong Yang, Xuguang Chen, Zugeng Lin

Journal of Electrochemistry

The electronic properties of the passive film on REBAR electrodes in simulatedcement pore solution (pH=9.0～13.8) have been investigated using in-situ photoelectrochemical methods. The results show that the passive film is composed of mixed oxides of ferrum, and it is an amorphous, n-type semiconductive film. Variations of pH values, ions in the solution and film-formation potentials can affect the composition of the films. There are two main stages in the growthof the film, with two rate functions characterized by linear relation between the film thickness and thelogarithm of time. The addition of inhibitor NaNO2 changes the composition, structure and growth …

Go to article

Laser Scanning In-Situ Photoelectrochemical Microscopictechnique And Its Applications, Zugeng Lin, Jinkua You, Xiangdong Zhuo, Chun Zhang, Yong Yang May 1995

Laser Scanning In-Situ Photoelectrochemical Microscopictechnique And Its Applications, Zugeng Lin, Jinkua You, Xiangdong Zhuo, Chun Zhang, Yong Yang

Journal of Electrochemistry

The main factors of the laser scanning in-situ photoelectrochemical microscopic measurement system which is set up in our lab have been discusaed in this paper. Some applications of this technique for in-situ study of modification and processing of semiconductor electrodes, monitoring of electro deposition process of semiconducting material and redox reaction occurring at metal oxide electrodes have also been presented. The results have shown that the technique is very powerful that for studing local photoelectrochemical properties of semiconductors and metal oxide electrodes. These provide important information on the micro structural and electronic properties in the solid/electrolyte interface.

Go to article

Photoelectrochemical And Spectroelectrochemical Studies Oniron Oxide Ultrafine Particles, Maizhi Yang, Yongjun Ji, Wen Zhang, Shengmin Cai, Xiaojiang Lu, Zhongqun Tian, Jin Luo May 1995

Photoelectrochemical And Spectroelectrochemical Studies Oniron Oxide Ultrafine Particles, Maizhi Yang, Yongjun Ji, Wen Zhang, Shengmin Cai, Xiaojiang Lu, Zhongqun Tian, Jin Luo

Journal of Electrochemistry

In this paper, Raman spectra, photocurrent and the UV-VIS reflectance aremeasured for studying the α-Fe2O3 ultrafine particles adsorbed on Pt electrode. The blue shifts of Raman peaks demonstrate the size quantization effect for the particles of 50 nm in diameter ascompared with the bulk material. With the changing of the potential, the photocurrent decrcases as the UV-VIS reflectance increases, and vice-versa. Therefore, the potential not only affects the hargetransfer direcdtion in the interface of electrode/redox couple, but also influences the light absortion onthe surface of particles. According to the results of photoelectrochemistry, we suggest that the cathodic …

Go to article

A Photoelectrochemical Investigation Of Zirconium Oxide Film, Maizhi Yang, Ping Wei, Di Quarto F., Piazza S., Sunseri C. Feb 1995

A Photoelectrochemical Investigation Of Zirconium Oxide Film, Maizhi Yang, Ping Wei, Di Quarto F., Piazza S., Sunseri C.

Journal of Electrochemistry

A photoelectrochemical investigation has been carried out on zirconium initialoxide film and its oxide film grownanodically at constant rate up to different thickness. Both anodicand cathedic photocurrents on the photocurrent spectrum depended on the potential, but had littlerelation with the forming anedic films or measuring solutions. Photocurrent spectrum and photocurrenttransients suggested that the oxide films on zirconium were duplex layers structure. The internal layerwas ZrO2 and the external layer ZrO2·(H2O)n. The photocurrent included photogenerated carrier ininternal and external oxide films, as well as internal photoinjection process for electrons from thesubstrate metal into the …

Go to article

Reaction Of Titanocene Dichloride With Acetylenedicarboxylate, Tanya L. Hagler, Mark Draganjac, Paul M. Nave, J. Ed Bennett, Farooq Kahn, Robert Engelken, Gerard Williams, Chris Poole, Kwok Fai Yu Jan 1994

Reaction Of Titanocene Dichloride With Acetylenedicarboxylate, Tanya L. Hagler, Mark Draganjac, Paul M. Nave, J. Ed Bennett, Farooq Kahn, Robert Engelken, Gerard Williams, Chris Poole, Kwok Fai Yu

Journal of the Arkansas Academy of Science

The reaction of Cp2TiCl2 with either the mono- or dipotassium salt of acetylenedicarboxylic acid (ADC) gives high yields of an insoluble orange product. The insoluble compound shows potential semiconductor behavior, as evidenced by an apparent bandgap in the orange region of the visible spectrum. Under N2 ,the compound decomposes at 238° C, eventually losing approximately 46% total mass up to 1350° C. The exothermic decomposition in air, beginning at 235° C, results in the formation of titanium oxides.

Go to article

First Prev