Polymer and Organic Materials Commons^™

Analysis Of Ptfe Radial Lip Seals For Wheel Bearing Applications, Madison Vogt

Theses and Dissertations--Mechanical and Aerospace Engineering

A numerical analysis was conducted to investigate the viscoelastic effects of nonlinear materials on the sealing zone and contact pressure distribution of radial lip seals in a conventional geometric topology. The use of nonlinear materials in radial lip seal applications is desirable to improve operation and reliability of rotating machinery due to their high operating temperatures, chemical compatibility, and low friction coefficients. Examples include, but are not limited to, seals within industrial air compressors, turbine engines, aircraft landing systems, chemical processing equipment, and Freon pumps. This work focuses on analyzing the nonlinear viscoelastic response of pure Polytetrafluoroethylene (PTFE) and PTFE …

Growth Kinetics And Stability Of Metal Halide Perovskite Nanocrystals: Influence Of Stirring Speed And Water Exposure, You-Lin Huang

Theses and Dissertations--Mechanical and Aerospace Engineering

Cesium lead bromide (CsPbBr₃) perovskite nanocrystals (NCs) have garnered significant interest due to their exceptional optoelectronic properties, including high photoluminescence quantum yield, tunable bandgap, and excellent carrier dynamics. These attributes make them promising candidates for applications in light-emitting diodes, photovoltaics, and sensing technologies. However, optimizing their synthesis and improving their environmental stability remain critical challenges. This dissertation explores the growth kinetics of CsPbBr₃ NCs, focusing on the effects of stirring speed and water exposure on their structural and optical properties.

The synthesis of CsPbBr₃ NCs was performed using both mechanochemical (MC) and antisolvent methods, enabling an …

Fabricating Silver-Ceria Polymer Nanocomposite Scaffolds For Biomedical Therapeutic Applications, Shreya S. Pawar

Honors Undergraduate Theses

Improper healing of bone fractures and limited regeneration of bone following bone tumor resection remain a prevalent complication worldwide. Long-term effects of this include joint instability, limited movement, and arthritis. Bone infections (osteomyelitis), reactive oxygen species (ROS) generation via excessive inflammation, and underlying conditions such as osteoporosis can contribute to suboptimal bone tissue regeneration. ROS accumulation stimulates osteoblast apoptosis, while promoting osteoclast differentiation. These processes inhibit mineralization and osteogenesis. Conventional therapeutics involve the utilization of drugs and bone grafts. However, these approaches pose limitations and can result in subsequent complications. Microbial infections, ROS accumulation, and excessive inflammations are factors that …

Polymeric Nanocomposites-Based Advanced Coatings For Antimicrobial And Antiviral Applications: A Comprehensive Overview, Rachid Amrhar, Jaspal Singh, Mostafa Eesaee, Pascal Carrière, Alireza Saidi, Phuong Nguyen-Tri

Revues de littérature, synthèses de connaissances

The rise in microbial infections and viral outbreaks has accelerated the development of advanced antibacterial and antiviral coating that effectively minimize infection risks. Amidst rising global health concerns due to infectious diseases, these coatings have emerged as vital solutions for surface protection across various settings. This review focuses on the recent development and in-depth analysis includes synthesis process, inactivation mechanism in photoreactive antimicrobial and antiviral bio-coatings. This review comprehensively explores the development of different nanocomposite materials, including polymers based on metal oxide nanoparticles, metal nanoparticles, graphene-based materials, and organic-inorganic composites. Their practicality and compatibility with diverse surfaces such as ceramics, …

Linking Molecular Structure Evolution To Mechanical Degradation During Environmental Aging In Conventional And Recyclable Epoxy Systems, Ben T. Jewell

Dissertations, Master's Theses and Master's Reports

The long-term performance of polymeric materials in extreme environments is governed by complex chemical and physical aging processes that alter their molecular structure and mechanical integrity. Conventional thermoset epoxies, while widely used in structural applications, are particularly susceptible to oxidative degradation at elevated temperatures, leading to embrittlement and loss of structural integrity. In the first part of this work, diffusion-limited oxidation (DLO) in a bulk structural epoxy was systematically investigated to establish the link between heterogeneous microstructural evolution and macroscopic mechanical degradation. High-temperature oxidation experiments were conducted in a controlled environmental chamber, and the resulting chemical, thermal, and mechanical changes …

Degradation Of Polymers And Polymer Composites In Extreme Environments, Ben T. Jewell

Dissertations, Master's Theses and Master's Reports

Polymeric materials are widely used in engineering applications due to their high strength-to-weight ratio, easy manufacturability, and cost-effectiveness. When incorporated into composites, they provide further performance enhancements, enabling use in demanding structural applications. However, long-term exposure to harsh environments including elevated temperatures, UV radiation, harsh chemicals, and radiation, can drive degradation processes that alter the material’s network structure, and in turn, degrade its mechanical performance. Exposure to thermo-oxidative conditions is one of the most common environments driving polymer degradation, leading to chain scission and crosslinking events, with the resulting oxidative products causing discoloration, reduced ductility, and changes in glass transition …

Prediction Of Glass Transition Temperature Of Polymers Using Structure-Based Models, Nicholas Wolfe

Williams Honors College, Honors Research Projects

The focus for this study is prediction of glass transition temperatures of polymers using machine learning models. The preprocessing of the data included the generation of descriptors, the scaling of the data, the principal component analysis for dimensionality reduction, and the clustering of the data. Three methods of property predictions were utilized including Linear Regression, Random Forest, and a Feedforward Neural Network. The dataset consisted of over 7000 polymers each with their respective glass transition temperatures. This study found that the Random Forest model returned the best results followed by the Feedforward Neural Network then the Linear Regression model. Each …

Molecular Modeling Methods And Applications For Accelerating Polymerization And Pyrolysis Studies, Joshua D. Kemppainen

Dissertations, Master's Theses and Master's Reports

Polymer matrix composites and carbon-carbon composites play critical roles in the aerospace, automotive, and construction industries. Different matrix materials and processing conditions can lead to a large variety of composite materials and composite properties. Integrated computational materials engineering has been used to tailor PMC matrix materials and processing conditions to specific properties and manufacturing techniques. The integrated computational materials engineering process modeling framework uses molecular dynamics at the nanometer length scale to characterize the evolving thermo-mechanical properties of the polymer as it cures. Then finite element analysis is used at the micrometer length scale to adjust cure cycles to tailor …

Dielectric Performance Of Fused Filament Fabricated Ultem 9085 For Naval Radome Application, Carson Rogers

UNF Graduate Theses and Dissertations

ULTEM 9085 is a high-performance thermoplastic used in the fused filament fabrication (FFF) additive manufacturing process. It has found use in applications where mechanical strength, chemical integrity, and thermal stability are of paramount importance. In this thesis, the effects of process parameters, annealing, and weathering on the mechanical and dielectric properties of FFF ULTEM 9085 have been investigated.

The first part reviews existing research on how printing parameters such as nozzle temperature, chamber temperature, print speed, infill, and layer height affect the mechanical performance of FFF ULTEM 9085. Data from the manufacturer of commonly used ULTEM 9085 filament, Stratasys, has …

Enhancing The Mechanical Properties Of Sla 3d-Printed Bio-Resin From Linseed Oil Using Cellulose And Lignin Biopolymers, Chukwunonso A. Ikedionu

College of Graduate Studies: Theses & Dissertations

Abstract

This research explores the development of bio resin from linseed oil by the process of epoxidation and acrylation to produce acrylated epoxidized linseed oil (AELO). Lignin and cellulose biopolymers were added as reinforcement at varying weight fractions of 1 wt.%, 2.5 wt.%, and 5 wt.%, and their mechanical performance was compared against pure AELO. The formulations were printed using an Elegoo SLA 3D printer to create standardized test specimens like tensile bars, compression cylinders, and hardness blocks, which were all prepared according to the ASTM testing standard.

The results indicate that reinforcement effects depend on both filler type and …

Design And Manufacturing Of Multifunctional Piezoelectric Composites, Huan Zhao

Dartmouth College Ph.D Dissertations

Piezoelectric materials possess a unique ability to convert mechanical energy into electrical signals and have broad industrial applications. However, monolithic piezoelectric materials such as piezoceramics and piezopolymers often suffer from inherent trade-offs among mechanical strength, elasticity, and durability. Piezoelectric composites, typically consisting of a polymer matrix with ceramic reinforcements, offer a solution by combining the advantages of each constituent. Nevertheless, maintaining stable mechanical performance in high-temperature environments remains a significant challenge as conventional polymer matrices usually experience structural degradation.

In this thesis, a novel piezoelectric composite is developed using a preceramic polymer (PCP) matrix with barium titanate (BTO) inclusions. PCPs …

La2nio4+Δ-Based Solid Oxide Electrolysis Cell (Soecs) Electrodes Enhanced With Complex Perovskite Nanocatalyst Processed By Surfactant-Enabled Infiltration, Cole Samuel Klemstine

Graduate Theses, Dissertations, and Problem Reports (ETD)

As the world seeks to reduce its reliance on hydrocarbons, the demand for sustainable hydrogen production methods has become increasingly critical. Hydrogen is a versatile energy carrier that can be produced from various sources, including water, natural gas, and biomass. Replacing the burning of hydrocarbons with hydrogen could significantly reduce greenhouse gas emissions, contributing to global climate goals like those set by the US H2NEW program. The joint technologies of solid oxide fuel and electrolysis cells present the ability to both produce and process clean hydrogen to meet these goals. Development into solid oxide fuel cells has been met with …

Reuse Of Calcium Carbonate (Caco3) Recovered From Discarded Carpets As Filler In Fiber-Reinforced Polymer (Frp) Composites, Roshan Devkota

Graduate Theses, Dissertations, and Problem Reports (ETD)

Over four billion pounds of carpet are discarded annually in the United States, making carpet waste a significant environmental concern. Calcium carbonate (CaCo₃) constitutes up to 45% of the mass of most synthetic carpets. Reusing this CaCo₃ as a filler in the rapidly growing fiber-reinforced polymer (FRP) industry, which is projected to reach USD 10.38 billion, presents a low-cost, practical approach to developing a market-based solution to post-consumer carpet waste.

This study investigates the reuse of CaCo₃ recovered from discarded carpet backing as a filler in FRP composites, focusing on its mechanical viability in comparison to virgin CaCo₃. The methodology …

3d Printing Of A Solid-State Battery, Maurizio A. Brozzi

Honors Undergraduate Theses

Solid-state battery research has gained significant attention in recent years, as it provides a unique solution for several common issues in conventional Li-ion batteries. Additionally, as additive manufacturing technologies continue to advance, they have the potential to fabricate solid-state batteries with new materials. The objective of this study is to explore the feasibility of 3D printing of a solid-state battery. By creating an initial PEO-PSF hybrid polymer matrix dissolved in DMSO and adding a lithium salt, the base electrolyte ink was formed. With the addition of conductive additives and active material, electrode inks were also produced. Super P was used …