Polymer and Organic Materials Commons^™

Novel Thermal Coating For High-Speed Airplanes, Abinash Satapathy, Lakshay Battu, Liam Watson, Nazanin Rajabi

Symposium of Student Scholars

In comparison to various other materials, Carbon Fiber, specifically Carbon Fiber Reinforced Polymers (CFRP), is pre-eminent amongst other materials for use on aeronautical systems. Due to its high specific strength (strength-to-weight ratio), CFRP is prominent for carrying heavy loads while maintaining a lightweight build. However, when influenced by heat resulting from air resistance, CFRP is known to undergo serious degradation that would significantly decrease the effectiveness of the polymers. To prevent this degradation and maintain the strength of the CFRP, thermal protective layers (TPLs) are designed to shield the CFRP from heat exposure. This research is focused on the examination …

Prospects For Using Metal-Polymer Composite Structures In The Gear Manufacturing, Umid Mamasobirov, Shoraxmat Shoobidov, A F. Husanboyev

Technical science and innovation

In this paper, some thermoplastic polymer composites and filler composites for the production of metal-polymer gear transmissions are presented. Efforts have been made to expand the raw material base and identify ways to increase the durability of gears through technological and design measures.

Machine Learning Assisted Discovery Of Shape Memory Polymers And Their Thermomechanical Modeling, Cheng Yan

LSU Doctoral Dissertations

As a new class of smart materials, shape memory polymer (SMP) is gaining great attention in both academia and industry. One challenge is that the chemical space is huge, while the human intelligence is limited, so that discovery of new SMPs becomes more and more difficult. In this dissertation, by adopting a series of machine learning (ML) methods, two frameworks are established for discovering new thermoset shape memory polymers (TSMPs). Specifically, one of them is performed by a combination of four methods, i.e., the most recently proposed linear notation BigSMILES, supplementing existing dataset by reasonable approximation, a mixed dimension (1D …

Polyaniline/Cobalt Nanoparticle Composite Films, Rifat Mahbub

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Polymer nanocomposites have been gaining attention because of the enhanced properties of the element materials it can offer. These composites have been used in biological sector as well as quantum computing and memory devices. These are also used as different kind of sensors. Polymer composites incorporated with magnetic nanoparticles can modify the magnetic property of the nanoparticles and that has huge potential to be used in different sort of applications.

This work aims to develop a polymeric nanocomposite incorporating a conducting polymer and magnetic nanoparticles. The influence of the conducting polymer on the magnetic property of the nanoparticles was investigated. …

Tuning Electrochemical Interactions And Polymer Electrolyte Interfaces For Enhanced Organic Acid Separations Using Electrodeionization, Matthew Leo Jordan

LSU Doctoral Dissertations

Chemical separations are critical processes for chemical and industrial plants to purify and isolate products however current separation technologies, such as distillation, rely on energy intensive processes. Electrochemical separation processes, such as electrodialysis and electrodeionization, are an energy efficient alternative that are emerging as an alternative for thermal-based separations. Organic acids are weakly ionizable species and susceptible for purification from process streams using electrochemical processes. Recently the fermentation route has garnered greater attention as a means for producing value-added chemicals, such as organic acids, from a renewable feedstock and aiding the circular economy. Some of the challenges electrodialysis faces for …

Thermomechanics Of Semiconducting Polymers And Their Morphological Phenomena, Luke Galuska

Dissertations

In contrast to conventional silicon-based electronics, semiconducting polymers show great promise for emerging applications in soft, flexible, and ductile electronic technologies. This is due to their polymeric nature, tailorable structure, and sub-100 nm device thickness. Despite this mechanical novelty, there remains a poor understanding of their structure-property-processing relationships, which has hindered growth within the field. This dissertation elucidates these relationships through investigation of their thermomechanics, and morphological phenomena. This was accomplished through the following projects:

1) To demonstrate the impact of backbone rigidity on semiconducting polymer thermomechanics, we varied the backbone rigidity of an NDI-based polymer by inserting flexible methylene …

Optimization Of A Novel Nipam-Based Thermoresponsive Copolymer For Intramuscular Injection As A Myoblast Delivery Vehicle To Combat Peripheral Artery Occlusive Disease, Quentin R. Klueter

Master's Theses

There is a need for a minimally invasive delivery method to enable cell therapies to combat peripheral artery occlusive disease (PAOD) in end stage patients. Myoblasts show promise as a cell mediated therapy but warrant an improved delivery method to increase cell retention in the region of interest because of their adherent nature, relative to previously used BM-MNC’s that are non-adherent. Contemporary issues with achieving successful cell therapies of vasculature can be mainly characterized by the lack of clinical translation from promising animal studies and absence of cell delivery scaffolding. Naturally, polymers have been widely experimented with as grafts to …

4,6-O-Phenylethylidene Acetal Protected D-Glucosamine Carbamate-Based Gelators And Their Applications For Multi-Component Gels, Pooja Sharma, Guijun Wang

Chemistry & Biochemistry Faculty Publications

The self-assembly of carbohydrate-based low molecular weight gelators has led to useful advanced soft materials. The interactions of the gelators with various cations and anions are important in creating novel molecular architectures and expanding the scope of the small molecular gelators. In this study, a series of thirteen new C-2 carbamates of the 4,6-O-phenylethylidene acetalprotected D-glucosamine derivatives has been synthesized and characterized. These compounds are rationally designed from a common sugar template. All carbamates synthesized were found to be efficient gelators and three compounds are also hydrogelators. The resulting gels were characterized using optical microscopy, atomic force microscopy, …

Study Of Various Quality Characteristics Of Polyester Fibers Obtained On The Basis Of Primary And Secondary Polyethylene Terephthalate, Samida Ernzarova, Asror Juraev, Muzaffar Alimukhamedov, Farhod Magrupov

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of study is comprehensive determination of various quality characteristics of polyester fibers obtained on the basis of primary and secondary polyethylene terephthalate. The analysis of the raw material base of pre-oriented yarns (POY) threads has been carried out. The technological, physicomechanical properties, as well as the structure of the primary and secondary polyethylene terephthalate used in the production of the threads have been studied. The structure and properties of polyethylene terephthalate changed: the properties were worse, the structure were amorphous, the molecular weight decreased. The structure of recycled polyethylene terephthalate changed as a result of technological conversions in …

Мulti-Layer Fibrous Material Based On Textile Waste, Sevara Alimkhanova, Nodir Mirzaev, Adham Rafikov

CHEMISTRY AND CHEMICAL ENGINEERING

At the textile and sewing and knitting enterprises of the Republic of Uzbekistan, the number of which increases every year, a sufficient amount of technological waste is accumulated, which formed in the processes of sizing yarn, starting and setting up equipment, designing and sewing products. Meanwhile, there is a shortage of warm, comfortable, light, soft lining materials for clothes and shoes based on natural raw materials. With the purpose of rational use of textile waste - shredded, disheveled scraps of fabric and knitwear, a multilayer nonwoven material for details of clothing and footwear has been obtained. The material formed by …

Spectral Features And Hydrogen Bond Structure Of Aqueous Solutions Of Ethanol, Dilbar Bozorova, Shukur Gofurov, Mavlonbek Ziyayev, Abdulmutallib Kokhkharov, Oksana Ismailova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this work is develop an approach that makes it possible to study the spectral properties and structure of intermolecular hydrogen bonds in aqueous solutions of ethanol formed in systems whose existence in a gaseous medium or an isolated state is practically impossible. This approach bases on the combined use of infrared spectroscopy and molecular dynamics (MD) methods. An analysis give the structural reorganization of water molecules depending on the concentration of ethanol alcohol. It has been shown that the method of molecular dynamics with classical force fields makes it possible to explicitly take into account the molecules …

Determination Of The Stability Of Complex Compounds Of Copper (Ii), Zinc (Ii), Cadmium (Ii) And Silver (I) With Covalently Immobilized Sulfur Contain Ligands, Sherzod Kasimov, Khayit Turaev, Abdulakhat Jalilov, Farkhod Narmuratov, Zulkhumor Jumayeva

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this study is to determine the stability of the obtained coordination compounds of some d-metals with covalent immobilized sulfur-containing ligands. To achieve this goal, coordination compounds of copper (II), zinc (II), cadmium (II) and silver (I) ions with covalent immobilized sulfur-containing ligands - О,О-di- (2-aminoethyl) -dithiophosphate potassium - polyester matrix (KD2AEDTP-PEM), O,O-di- (2-aminoethyl) -dithiophosphate potassium - carbamide-formaldehyde matrix (KD2AEDTP-KFM). Studies were carried out to determine the acid-base properties of covalent-immobilized sulfur-containing ligands - KD2AEDTP-PEM, KD2AEDTP-KFM and the concentration stability of the obtained coordination compounds with ions of copper (II), zinc (II), cadmium (II), and silver (I). Based …

Synthesis And Spectroscopic Study Of Complex Compounds Mn(Ii), Co(Ii), Cu(Ii) And Zn With 5-Amino-2-Mercaptobenzimidazole, Lobar Gapurova, Dilnoza Rakhmonova, Shakhnoza Kadirova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this work is to study the effect of the nature of electron-donor and electron-withdrawing substituents in the molecules of heterocyclic ligands, the nature of acidoligands and transition metal ions on the properties of the synthesized coordination compounds. A method for the synthesis of new complex compounds of Mn (II), Cо (II), Cu (II) and Zn with 5-amino-2-mercaptobenzimidazole has been developed and the composition and structure of the synthesized complex compounds have been studied using modern physicochemical methods, such as elemental, thermogravimetric, X-ray phase analysis and IR spectroscopy. Coordination competing donor centers, electronic and geometric structures of the …

Influence Of Pinholes On Water Vapor And Oxygen Permeation Of Packaging Foil And Films, Petri Johansson, Johanna Lahti, Jurkka Kuusipalo

Journal of Applied Packaging Research

Controlling of moisture and oxygen permeation through the packaging material is essential in most packaging applications. With multilayer structures of different barrier materials, there is possibility to create desired barrier properties to the package. The challenge is to plan appropriate barrier level, e.g. WVTR and OTR, theoretically to the package before producing the package. Furthermore, in specific packages there is a need to control the permeation e.g. respiration in vegetable packages. Typically foils and polymer films have high barrier properties, therefore, permeation can be controlled by producing artificial pinholes in these kinds of packages.

Influence of artificial pinholes in aluminium …

Monitoring Of State Transitions In Extreme Environment Application Materials Using Fiber Bragg Grating Sensors, Sabuj Khadka

Electronic Theses and Dissertations

By embedding both a single fiber Bragg grating (FBG) sensor and a thermocouple (TC) during the manufacturing for extreme environment applications of certain classes of materials such as metals and polymers, a novel in-situ approach was developed to precisely monitor their entire manufacturing processes. This novel monitoring technique was able to identify many characteristic points during the curing of room and high-temperature epoxies and the solidification processes of metal alloys composed of tin and bismuth which were selected in this research purely for verification purposes. Some of the characteristic points identified for the epoxies were: (i) the gel point, (ii) …

Carbon Nanotube Coated Fibrous Tubes For Highly Stretchable Strain Sensors Having High Linearity, Chenchen Li, Bangze Zhou, Yanfen Zhou, Jianwei Ma, Fenglei Zhou, Shaojuan Chen, Stephen Jerrams, Liang Jiang

Articles

Strain sensors are currently limited by an inability to operate over large deformations or to exhibit linear responses to strain. Producing strain sensors meeting these criteria remains a particularly difficult challenge. In this work, the fabrication of a highly flexible strain sensor based on electrospun thermoplastic polyurethane (TPU) fibrous tubes comprising wavy and oriented fibers coated with carboxylated multiwall carbon nanotubes (CNTs) is described. By combining spraying and ultrasonic-assisted deposition, the number of CNTs deposited on the electrospun TPU fibrous tube could reach 12 wt%, which can potentially lead to the formation of an excellent conductive network with high conductivity …

Spray Deposition Of Sustainable Plant Based Graphene In Thermosetting Carbon Fiber Laminates For Mechanical, Thermal, And Electrical Properties, Daniel W. Mulqueen, Siavash Sattar, Thienan Le, Oleksandr G. Kravchenko

Mechanical & Aerospace Engineering Faculty Publications

Graphene has generated substantial interest as a filler due to its exceptional strength, flexibility, and conductivity but faces obstacles in supply and implementation. A renewable, plant-based graphene nanoparticle (pGNP) presents a more accessible filler with the same properties as mineral graphenes. In this study, we examine the effects of pGNP, which was sprayed on a carbon fiber/epoxy prepreg at loadings from 1.1 to 4.2 g/m². The study considered the mechanical, thermal, and electrical properties of pGNP-composite. An even particle dispersion was achieved using a spray application of pGNP in a water/alcohol suspension with the addition of surfactants and …

Influence Of Saturation Nonequilibrium And Variable Operation Conditions On The Electromechanical Performance Of Ionic Polymer Metal Composite Actuator Architectures, Allison Maria Arnold

Graduate Theses, Dissertations, and Problem Reports (ETD)

Electroactive polymers (EAPs) continue to gain attention for their potential to offer unique and versatile solutions in the soft robotic and flexible electronic industries. Ionic Polymer-Metal Composites (IPMCs) are a class of ionic-type EAPs which can be configured as capacitor actuators with very low voltage requirements (≤ 5 V AC or DC). Their compact, portable, and lightweight properties, coupled with a biomimetic bending actuation response make them ideal for human-machine integrated technologies such as medical implants, active skins, and artificial muscles. The Nafion-based IPMC can be described as a layered composite capacitor containing an ionic polymer core, sandwiched between chemically …

Modeling, Fabrication, And Characterization Of Rf-Based Passive Wireless Sensors Composed Of Refractory Semiconducting Ceramics For High Temperature Applications, Kavin Sivaneri Varadharajan Idhaiam

Graduate Theses, Dissertations, and Problem Reports (ETD)

Real-time health monitoring of high temperature systems (>500^oC) in harsh environments is necessary to prevent catastrophic events caused by structural failures, varying pressure, and chemical reactions. Conventional solid-state temperature sensors such as resistance temperature detectors (RTDs) and thermocouples are restricted by their operating environments, sensor dimensions and often require external power sources for their operation. The current work presents the research and development of RF-based passive wireless sensing technology targeting high temperatures and harsh environmental conditions. Passive wireless devices are generally classified as near-field and far-field devices based on the interrogation distance. Near-field sensors are placed at …

Additive Manufacturing Waste Management System - Plastic Extrusion Process, Gabriel Bennett, Lindsay Liebrecht, David Lyogky, Wilson Woods

Williams Honors College, Honors Research Projects

3D printing is a fast-growing market with its main source of waste being PLA and ABS plastics. In 2019, the global additive manufacturing market grew to over $10.4 billion, crossing the pivotal double-digit billion threshold for the first time in its nearly 40-year history. (SmarTech Analysis, 2020 Additive Manufacturing Market Outlook and Summary of Opportunities Report). The waste is generated from failed prints and rejected support structures which are common occurrences for personal use. Plastic recycling has become one of the leading discussions of environmental protection and waste management. The 3D market currently does not offer an effective and affordable …

Amino-Polymer For Co2 Capture By Vacuum Swing Adsorption, Sean Billy

Williams Honors College, Honors Research Projects

The applications of sorbent compounds in conjunction with amines and other additives is an innovative method at combating CO2 pollution. An ideal solution would use an amine sorbent to trap the high levels of absorbed CO2 with a low binding energy (less than 45 kJ/mol) and subsequently release them into a stored vessel at ambient temperature with a vacuum swing adsorption system. Attempts at finding a best mixture will be conducted through the usage of a vacuum swing system, utilizing a bed syringe containing the sorbent mix and a vacuum syringe to pull on and subsequently release the CO2 into …

Effects Of Additive Manufacturing Techniques On The Magnetocaloric Properties And Chemical Stability Of Lafexcoysi13-X-Y Alloys, Binyam Wodajo

Theses and Dissertations

Additive manufacturing (AM) is an emerging process to fabricate net shape, intricate, engineering components with minimal material waste; however, traditionally it has been largely applied to structural materials. AM of functional materials, such as magnetic materials, has received much less attention and the field is still in its infancy. To date, AM of magnetocaloric regenerators for magnetic refrigeration (an energy-efficient alternative to the conventional vapor-compression cooling technology), remains a challenge. There are several magnetic refrigerator device designs in existence today that are predicted to be highly energy-efficient, on condition that suitable working materials can be developed. This challenge in manufacturing …

Rational Design Of Flexible And Stretchable Electronics Based On 3d Printing, Yuanhang Yang

Theses and Dissertations

Flexible and stretchable electronics have been considered as the key component for the next generation of flexible devices. There are many approaches to prepare the devices, such as dip coating, spin coating, Mayer bar coating, filtration and transfer, and printing, etc. The effectiveness of these methods has been proven, but some drawbacks cannot be ignored, such as lacking pattern control, labor consuming, requiring complex pretreatment, wasting conductive materials, etc.

In this investigation, we propose to adopt 3D printing technology to design flexible and stretchable electronics. The objective is to rationally design flexible and stretchable sensors, simplify the preparation process, form …

Microscale Contact And Friction Of Low Modulus, Lightly Crosslinked Polydimethylsiloxane, Justin Glover

Theses and Dissertations--Chemical and Materials Engineering

Friction and adhesion of soft materials are important for pressure sensitive adhesives, biomaterials, and soft robotics; however, the behavior on the microscale is not fully understood. When two objects come into contact, their interactions are usually mediated by small contact points due to surface roughness. At the microscale size, surface forces can deform soft materials to minimize energy by increasing the contact area, which is balanced by the elastic deformation of the polymer network. However, for soft, crosslinked materials with a modulus below ~100 kPa, it is challenging to predict the behavior with prior contact and friction models. Additionally, lightly …

Precision Machining Of Polymer Matrix Composites, Victor Martinez Polanco

All Graduate Theses, Dissertations, and Other Capstone Projects

This experiment was started to figure how the precision machining of polymer matrix composites differ from metals such as aluminum and steel. Polymer matrix composites are highly used in powered vehicles for their strength and light weight properties, but they are typically not machined to their final product how metals are. Polymer matrix composites are typically manufactured near their final shape, with some trimming involved to complete its shape. This research machined carbon fiber manufactured through a wet layup and through resin infusion, as well as aluminum and steel to compare their machineability and their surface finish. These materials were …

Branched Chain Amino Acid Strain State Monitoring With Raman Spectroscopy And Plasmonic Bowtie Nanoantenna Devices For Early Disease Detection, Caroline A. Campbell

Theses and Dissertations

This work centers on the development and the down-selection of nano-manufactured devices to be used in conjunction with Raman spectroscopy for probing a branched chain amino acid. The nano-manufactured devices integrate plasmonic nanoantennas for the purpose of amplifying molecular fingerprints, which are otherwise difficult to detect, through Surface Enhanced Raman Spectroscopy (SERS). Plasmonic nanostructures can be utilized for a variety of biomedical and biochemical applications to detect the characteristic fingerprint provided by Raman Spectroscopy. The nano-manufactured devices create an electric field that amplifies minute perturbations and raises the signal above background noise. This may provide a deeper understanding of signal …

Lateral-Torsional Instability And Biaxial Bending Of Imperfect Frp I-Beams, Jodi Knorowski, Stella B. Bondi, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

This paper presents the outcome of a theoretical and experimental study of the behavior of Fiber Reinforced Polymer (FRP) I-beams exposed to lateral-torsional instability or when subjected to biaxial bending. Laboratory experiments involved the application of vertical and horizontal static loads to a 4 x 4 x ¼ in. I-beam with various lengths and the resulting deflections were recorded. Governing biaxial flexure and torsion differential equations were modified to account for the presence of initial imperfections and subsequently solved using a central finite-difference scheme. The theoretical predictions of the beam behavior were found to be in good agreement with what …

A Flexible Dual-Mode Pressure Sensor With Ultra-High Sensitivity Based On Bto@Mwcnts Core-Shell Nanofibers, Bangze Zhou, Chenchen Li, Yanfen Zhou, Zhanxu Liu, Xue Gao, Xueqin Wang, Liang Jiang, Mingwei Tian, Feng-Lei Zhou, Stephen Jerrams, Jianyong Yu

Articles

Wearable flexible sensors have developed rapidly in recent years because of their improved capacity to detect human motion in wide-ranging situations. In order to meet the requirements of flexibility and low detection limits, a new pressure sensor was fabricated based on electrospun barium titanate/multi-wall carbon nanotubes (BTO@MWCNTs) core-shell nanofibers coated with styrene-ethylene-butene-styrene block copolymer (SEBS). The sensor material (BTO@MWCNTs/SEBS) had a SEBS to BTO/MWCNTs mass ratio of 20:1 and exhibited an excellent piezoelectricity over a wide range of workable pressures from 1 to 50 kPa, higher output current of 56.37 nA and a superior piezoresistivity over a broad working range …

Combinatorial Approaches For Effective Design, Synthesis, And Optimization Of Enzyme-Based Conjugates, Jordan Scott Chapman

Graduate Theses, Dissertations, and Problem Reports (ETD)

The specificity and efficiency with which enzymes catalyze selective chemical reactions far exceeds the performance of traditional heterogeneous catalysts that are predominant in industrial applications such as conversion of commodity chemicals to value-added products, fuel cells, and petroleum refinement. Moreover, biocatalysts exhibit exceptionally high product turnover at ambient conditions with little health and environmental burden. These advantageous qualities have led to the prolific use of enzyme catalysis in pharmaceutical, detergents, and food preservation industries wherein their use has greatly reduced waste generation, Unfortunately, the full slate of benefits that enzymes can impart to a broader range of chemical processes is …

Pilot-Scale Spinning And Sucrose-Tetra-Aldehydes-Crosslinking Of Feather-Derived Protein Fibers With Improved Mechanical Properties And Water Resistance, Bingnan Mu, Faqrul Hassan, Qianmei Wu, Yiqi Yang

Department of Textiles, Merchandising and Fashion Design: Faculty Publications

Pliable and water-resistant protein fibers from feathers were developed via continuous one-step spinning and crosslinking using sucrose-tetra-aldehydes. Though flexible protein fibers from feathers were developed, poor wet stability and low tenacity still limit the large and high-end applications of feather-derived fibers. Despite that saccharide aldehydes are considered as an efficient and sustainable crosslinker, substantial concerns such as generation of formaldehyde, high consumption of modifiers, loss of mechanical properties, yellowing, and decline in dyeability of fibers, exist after crosslinking. In this work, we controlled structures of crosslinkers and incorporated disaccharide-tetra-aldehydes into a continuous wet-spinning line. No formaldehyde was generated in the …