Polymer and Organic Materials Commons^™

A Soft Condensed Matter Approach Towards Mathematical Modelling Of Mass Transport And Swelling In Food Grains, Michael Chapwanya, N. Misra

Articles

Soft condensed matter (SCM) physics has recently gained importance for a large class of engineering materials. The treatment of food materials from a soft matter perspective, however, is only at the surface and is gaining importance for understanding the complex phenomena and structure of foods. In this work, we present a theoretical treatment of navy beans from a SCM perspective to describe the hydration kinetics. We solve the transport equations within a porous matrix and employ the Flory–Huggin’s equation for polymer–solvent mixture to balance the osmotic pressure. The swelling of the legume seed is modelled as a moving boundary with …

Fatigue Life Prediction Of Magnetorheological Elastomers Subjected To Dynamic Equi-Biaxial Cyclic Loadin, Yanfen Zhou, Stephen Jerrams, Tony Betts, Lin Chen

Articles

Prediction of fatigue life is of great significance in ensuring that dynamically loaded rubber components exhibit safety and reliability in service. In this text, the dynamic equi-biaxial fatigue behaviour of magnetorheological elastomer (MREs) using a bubble inflation method is described. Wöhler (S-N) curves for both isotropic and anisotropic MREs were produced by subjecting the compounds to cycling over a range of stress amplitudes (σ_a) between 0.75 MPa and 1.4 MPa. Changes in physical properties, including variation in stress-strain relations and complex modulus (E*) during the fatigue process were analysed. It was found that the complex modulus of MRE …

Prediction Of Compressive Creep Bhaviour In Flexible Polyurethane Foam Over Long Time Scales And At Elevated Temperatures, Conor Briody, Barry Duignan, Stephen Jerrams, Stephen Ronan

Articles

Compressive creep gradually affects the structural performance of flexible polymeric foam material over extended time periods. When designing components, it is often difficult to account for long-term creep, as accurate creep data over long time periods or at high temperatures is often unavailable. This is mainly due to the lengthy testing times and/or inadequate high temperature testing facilities. This issue can be resolved by conducting a range of short-term creep tests and applying accurate prediction methods to the results. Short-term creep testing was conducted on viscoelastic polyurethane foam, a material commonly used in seating and bedding systems. Tests were conducted …

The Implementation Of A Visco-Hyperelastic Numerical Material Model For Simulating The Behaviour Of Polymer Foam Materials, Conor Briody, Barry Duignan, Stephen Jerrams, John Tiernan

Articles

Polyurethane foam has been in use for some time in wheelchair seating systems as it offers good pressure relieving capabilities in most cases. However, little characterisation work has gone into seating foam materials by comparison with conventional elastomeric materials. Accurate material models could allow better prediction of foam in-service behaviour, which could potentially improve seating design practises. The objective of this work was to develop an approach for the validation of hyperelastic and viscoelastic material model parameters used to simulate polyurethane foam behaviour. Material parameters were identified from relevant test procedures and implemented in a Finite Element simulation of an …

Equi-Biaxial Fatigue Of Elastomers: The Effect Of Oil Swelling On Fatigue Life, Stephen Jerrams, John Hanley, Niall Murphy, Ali Hassan

Articles

The effect of oil swelling on the fatigue life of ethylene propylene diene monomer rubber (EPDM) has been studied under conditions of equi-biaxial cycling using dynamic bubble inflation. Specimens were subjected to varying degrees of swelling in reference mineral oils and fatigued at constant engineering stress amplitudes. The reference oils used for swelling the EPDM had known aniline points, allowing the rubber-oil compatibility to be determined. The inflation fluid for fatigue testing was selected with a solubility parameter that would produce a desired level of incompatibility with the test specimens, thereby limiting the amount of additional swelling during cycling. Wöhler …

Damping Of Magnetorheological Elastomers, Lin Chen

Articles

The damping property of magnetorheological (MR) elastomers is characterized by a modified dynamic mechanical-magnetic coupled analyzer. The influences of the external magnetic flux density, damping of the matrix, content of iron particles, dynamic strain and driving frequency on the damping properties of MR elastomers were investigated experimentally. The experimental results indicate that the damping properties of MR elastomers greatly depend on the interfacial slipping between the inner particles and the matrix. Different from general composite materials, the interfacial slipping in MR elastomers is affected by the external applied magnetic field.

Effect Of Carbon Black On The Mechanical Performances Of Magnetorheological Elastomers, Lin Chen

Articles

Several magnetorheological elastomer (MRE) samples, with different weight percentages of carbon black, were fabricated under a constant magnetic field. Their microstructures were observed by using an environmental scanning electron microscope (SEM), and their mechanical performance including magnetorheological (MR) effect, damping ratio and tensile strength were measured with a dynamic mechanical analyzer (DMA) system and an electronic tensile machine. The experimental results demonstrate that carbon black plays a significant role in improving the mechanical performance of MR elastomers. Besides the merits of high MR effect and good tensile strength, the damping ratio of such materials is much reduced. This is expected …

Microstructures And Viscoelastic Properties Of Anisotropic Magnetorheological Elastomers, Lin Chen

Articles

The microstructures and viscoelastic properties of anisotropic magnetorheological elastomers were investigated in this paper. The measurement results show that their mechanical properties are greatly dependent on the magnetic flux density applied in preparation. A finite-column model was proposed to describe the relations between the microstructures and the viscoelastic properties. The simulation results agree well with the experimental results.

Investigation On Magnetorheological Elastomers Based On Natural Rubber, Lin Chen

Articles

Magnetorheological Elastomers (MR Elastomers or MREs) are a kind of novel smart material, whose mechanical, electrical, magnetic properties are controllable under applied magnetic fields. They have attracted increasing attentions and broad application prospects. But conventional MREs are limited to wide applications because their MR effects and mechanical performances are not high enough. This paper aims to optimize the fabrication method and to fabricate good natural rubber based MREs with high modulus by investigating the influences of a variety of fabrication conditions on the MREs performances, such as matrix type, external magnetic flux density, and temperature, plasticizer and iron particles. Among …

Friction And Adhesion In Rigid Surface Indentation Of Nitrile Rubber, Stephen Jerrams

Articles

When a rigid body in the form of a plane strain indentor is forced into an elastomer, the asperities on the surface of the indentor are filled by the softer material. As depth of ingress increases, the rubber displaced into the indentor asperities exhibits stick-slip behaviour. The rubber adheres to the rigid body and if the depth of ingress is held at a maximum, the level of adhesion remains constant despite short-term load relaxation occurring in the rubber.

This text describes the influence of a range of factors on indentation forces and adhesion in rigid indentation of hydrogenated nitrile rubbers. …