Polymer and Organic Materials Commons^™

Adsorption Of Pfas On Bridged Functionalized Organosilica Materials, Elisha Lawerh Kabutey

Electronic Theses and Dissertations

PFAS are hazardous contaminants that have a devastating impact on human health and the environment. Their hazardous nature has led to the development of various adsorption methods for removing these contaminants from water sources. In this study, functionalized organosilica materials were synthesized from bis[3-(trimethoxysilyl)propyl] amine using the sol-gel method. The surface amino groups of the organosilica were converted into amine hydrochloride groups. Their adsorption properties were evaluated using salts of perfluorooctanoic acid, perfluorooctanesulfonic acid, and perfluorobutanesulfonic acid. Results showed excellent adsorption capacity of the materials. Adsorption of PFAS leads to particle agglomeration and flotation of the spent material. A column …

Engineering Silicone Magnetic Fluids For Localized Radiation Attenuation During Ocular Melanoma Brachytherapy, Zachary L. Caprow

All Dissertations

Ocular melanoma is commonly treated using plaque brachytherapy; however, radiation-induced damage to healthy ocular tissues frequently results in partial or complete vision loss. This work investigates the development of an injectable, magnetically responsive silicone magnetic fluid designed to localize adjacent to the tumor and attenuate low-energy gamma radiation during treatment.

The material system consists of iron oxide nanoparticles surface-functionalized with a siloxane polymer, in which the nanoparticles provide magnetic responsiveness and radiation attenuation, while the polymer coating ensures colloidal stability, injectability, and biocompatibility. A one-pot synthetic approach was developed wherein a functionalized siloxane polymer containing iron-affinitive groups was reacted with …

Molecular Diffusion In Chemically Amplified Resists For Euv Lithography, Eshan Dilina Thilakarathna

Electronic Theses & Dissertations (2024 - present)

Photolithography is a critical manufacturing step in high-volume manufacturing (HVM) of semiconductor devices, where a photoresist layer is used to transfer nanoscale patterns onto the underlying stack materials. As the microelectronics industry continues to move toward smaller node sizes, driven by Moore's Law. As a result, the tolerances for photoresist performance have become increasingly demanding, which necessitates simultaneous improvements in resolution, defectivity, and roughness. At advanced nodes, these performance limitations are governed by the fundamental stochastic nature of the photochemical processes occurring within the resist film itself, rather than the optical or tool-level constraints. Photon shot noise, the statistical distribution …

Computational Design Of Nanoporous Materials For The Adsorption Of Per- And Polyfluoroalkyl Substances, Daniel D. Mottern

Dissertations

Per- and polyfluoroalkyl substances (PFAS) are a large family of chemicals that have seen wide usage due to their fluorinated carbon backbone. The presence of strong C-F bonds in the backbone lends PFAS molecules high thermal and chemical stability, as well as strong hydrophobicity and lipophobicity. This combination of properties has led to heavy use of PFAS as surfactants, non-stick coatings, and aqueous foam forming films and flame retardants. However, these properties bring their own consequences. The high chemical and thermal stability of PFAS renders them persistent, with the C-F bonds resisting naturally occurring forms of degradation. Existing forms of …

Polymer-Enhanced Nanopore Sensing, Eugene Gyasi Agyemang

Graduate Theses and Dissertations

The resistive pulse technique characterizes single analytes by detecting fluctuations in the ion current as they pass through a narrow orifice connecting two electrolyte-filled chambers, each containing a single electrode. The amplitude, shape, frequency, and duration of these fluctuations primarily provide information about the analyte’s size, shape, concentration, and net surface charge, respectively. One configuration for resistive pulse measurements is of an electrolyte-filled nanopipette immersed in a bath, where the nanopipette tip acts as the nanoscale orifice. It was previously shown that incorporating the large quantities polymer polyethylene glycol (PEG 8K, 50% w/v) into the external electrolyte bath dramatically enhanced …

Mechanistic Insights Into Polymer-Assisted Graphene Exfoliation: The Roles Of Velocity, Adhesion, Cohesion, Temperature, Peeling Mode, And Edge Defect Via Coarse-Grained Molecular Dynamics, Linjiale Dai

All Theses

Graphene exfoliation is a critical step in the fabrication of high-quality graphene

layers. However, the underlying fracture mechanisms remain poorly understood. In this

work, I employed coarse-grained (CG) molecular dynamics (MD) simulations to

investigate how factors such as interfacial binding energy, substrate cohesion, temperature,

peeling mode, and edge defects influence the outcome of the exfoliation process. To model

polymer-assisted mechanical exfoliation, I used a finite-size system in which multilayer

graphene (MLG) is sandwiched between two thin polymer films. Leveraging the

spatiotemporal efficiency of the CG model, I performed fifty simulation iterations per

parameter set and analyzed the results from a …

Nanomaterial-Enabled Enhancements In Thylakoid-Based Biofuel Cells, Amit Sarode, Gymama Slaughter

Center for Bioelectronics Publications

Thylakoid-based photosynthetic biofuel cells (TBFCs) harness the inherent light-driven electron transfer pathways of photosynthesis to enable sustainable solar-to-electrical energy conversion. While TBFCs offer a unique route toward biohybrid energy systems, their practical deployment is hindered by sluggish electron transfer kinetics, unstable redox mediators, and inefficient interfacing between biological and electrode components. This review critically examines recent advances in TBFCs, with a focus on three key surface engineering strategies: (i) incorporation of nanostructured materials to enhance electrode conductivity and surface area; (ii) application of redox mediators to facilitate charge transfer between photosynthetic proteins and electrodes; and (iii) functional exploitation of individual …

Fabricating Silver-Ceria Polymer Nanocomposite Scaffolds For Biomedical Therapeutic Applications, Shreya S. Pawar

Honors Undergraduate Theses

Improper healing of bone fractures and limited regeneration of bone following bone tumor resection remain a prevalent complication worldwide. Long-term effects of this include joint instability, limited movement, and arthritis. Bone infections (osteomyelitis), reactive oxygen species (ROS) generation via excessive inflammation, and underlying conditions such as osteoporosis can contribute to suboptimal bone tissue regeneration. ROS accumulation stimulates osteoblast apoptosis, while promoting osteoclast differentiation. These processes inhibit mineralization and osteogenesis. Conventional therapeutics involve the utilization of drugs and bone grafts. However, these approaches pose limitations and can result in subsequent complications. Microbial infections, ROS accumulation, and excessive inflammations are factors that …

Synthesis Of Activated Carbon From Coconut Shell And Recycled Styrofoam Nanofiber For Water Filtration, Rahma Dani, Ismet Ismet, Leni Marlina, Rona Alisya, Muhamad Abel Kirana Aldi, Anggi Ludiansyah, Lintang Auliya Kurdiati, Meutia Kamilatun Nuha Ap Idjan, Agung Mataram, Muhammad Rama Almafie, Ida Sriyanti

Makara Journal of Science

Water pollution affects life sustainability; hence, several efforts have been exerted to overcome this problem. For ex-ample, nanofiber membrane technology is introduced to retain solutes while allowing only water molecules to pass through the system. Therefore, this study aimed to maximize the technology for water filtration using the electrospin-ning method by combining Styrofoam waste-based polymer with activated carbon from coconut shell waste (ACCS). The nanofiber diameter produced ranged from 590 nm to 610 nm with porous characteristics and without beads. The carbon content varied from 68.04% to 69.84%, according to the energy dispersive X-ray measurement, demonstrating the composite’s effectiveness. The …

Effect Of Oxidation Of Graphene On Agglomeration And The Mechanical Properties Of Thermosetting Resins, Matthew A. Reil

Electronic Theses and Dissertations

Thermosetting resins are used extensively worldwide in applications ranging from adhesives to structural components. However, these resins generally fail in a brittle fracture mode which is undesirable in most situations. Graphene (G) and its derivatives have been considered as additives to epoxy for material property enhancement and varied results have been reported in the literature. In this work, the effects of the oxidation of G to graphene oxide (GO) on polymer interactions and plate agglomeration were studied by classical molecular dynamics (MD). Results from those simulations concluded that agglomerates were likely present in all G-based nanocomposites. The effect of these …

Predicting Rheology Of Uv-Curable Nanoparticle Ink Components And Compositions For Inkjet Additive Manufacturing, Cameron D. Lutz

Master's Theses

Inkjet additive manufacturing is the next step toward ubiquitous manufacturing by enabling multi-material printing that can exhibit various mechanical, electronic, and thermal properties. These characteristics are realized in the careful formulation of the inks and their functional materials, but there are many constraints that need to be satisfied to allow optimal jetting performance and build quality when used in an inkjet 3-D printer. Previous research has addressed the desirable rheology characteristics to enable stable drop formation and how the metallic nanoparticles affect the viscosity of inks. The contending goals of increasing nanoparticle-loading to improve material deposition rates while trying to …

Crystalline Colloidal Arrays: Exploring Light-Matter Interactions, Haley W. Jones

All Dissertations

Understanding and manipulating quantum light-matter interactions, especially in the context of nanostructured environments, is highly critical for technological progress and inventive solutions in the fields of telecommunications, energy-efficient lighting, and cutting-edge quantum computing technologies. The fundamental interactions of photons with a surrounding environment directly impact the performance and efficiency of devices such as lasers, light-emitting diodes (LEDs), and quantum computing elements, which leverage the unique properties of confined structured environments. Since the late 1980s, the connection between a structured environment and the decay kinetics of an embedded fluorophore has been a highly debated and unresolved topic in the literature. More …

Interfacial Thermomechanical Behavior Of Hybrid Carbon Fibers, Sriraj Srihari

Doctoral Dissertations and Master's Theses

The carbon fiber/epoxy interface is of great importance in composite design due to its load transfer mechanisms from the weak epoxy to the stronger fiber. Improving the strength of the interface reduces the risk of failure at the interface and improves the load transfer to the fiber. In this study, two types of nano-species ZnO nanowires and nickel-based metal organic frameworks were grown on carbon fibers to improve the interfaces. The interfacial mechanics of the enhanced fibers are evaluated using nanoindentation studies. Composite samples with Aeropoxy matrix and vertically aligned fibers are fabricated for this purpose. A Bruker TI-980 TriboIndenter …

Analytical And Experimental Investigation Of Interphase And Dispersion Effects On The Mechanical Stiffness Of Cellulose Nanocomposites, Will Goldberg

McKelvey School of Engineering Graduate Student Theses & Dissertations

The effect of dispersion and interphase properties on the elastic behavior of cellulose nanocomposites was investigated using a number of composite models, experimental data and a thorough literature review. Cellulose nanocomposites consisting of soy protein isolate (SPI) and cellulose nanocrystals (CNC) or polydopamine coated cellulose nanocrystals (PD-CNC) were prepared via solution casting method and tested for mechanical stiffness. These outcomes were compared to standard composite models as well as novel methods adapted from the literature that incorporate data regarding dispersion quality and interphase properties. The literature review verified that both dispersion and interphase properties are highly dependent on interfacial chemistry …

Polyethersulfone Thin-Film Nanocomposite Membrane Embedded With Amine-Functionalized Graphene Oxide For Desalination Applications, Ahmed Bahaeldin

Theses and Dissertations

Thin-film nanocomposite (TFN) desalination membranes were prepared based on a polyethersulfone (PES) support, where the polyamide (PA) layer was embedded with amine-functionalized graphene oxide (GO). The effect of adding various concentrations of functionalized and un-functionalized GO on the desalination performance, hydrophilicity, and morphology of the membranes was additionally assessed throughout this work. Scanning electron microscopy (SEM) measurements were used to assess the morphology of the membranes in combination with Brunauer-Emmett-Teller (BET) analysis. Contact angle measurements were used to gauge the hydrophilicity of the synthesized membranes. The membrane with the best desalination performance contained 1x10^-3 wt/vol% of functionalized GO in …

Synthesis, Characterization, And Application Of Chitosan Nanoparticles For In Vitro Studies On Hela Cancer Cells, Rejeena Jha

Graduate Theses/Dissertations

Chitosan is a fibrous substance that is derived from chitin, a natural substance in the shells of crustaceans. It possesses all the necessary qualities for being used as carrier for the transport of drugs and genes into tumor, such as biodegradability, biocompatibility, hydrophilicity, and non-toxicity and cationic in nature. Ionic gelation method was used to synthesize chitosan (CS) nanoparticles (NPs). Ionic gelation is a very benign process chemically that requires mixing a CS aqueous solution with a sodium tripolyphosphate (TPP) aqueous solution at room temperature. In addition, a surfactant polyethylene oxide (PEO) alone and a diblock copolymer of PEO and …

Synthesis Of Monodisperse Nanoscintillators At High Temperatures For Biomedical Relevant Applications, Eric Zhang

All Dissertations

Luminescent sub-100 nm particulates continuously generate immense research interest in the biomedical field for imaging, theranostics, and optogenetics. Conventionally, upconversion nanoparticles or UV activated semiconductors are studied, however these materials are limited by biological barriers such as the skin which reduces the penetration depth of these excitation sources, tissue's auto- fluorescence, and toxicity. One approach to overcome these challenges is to use nanoscintillators (sub-100 nm materials that can generate visible light using high energy excitation sources such as x-rays) which can generate light locally to the human body. Numerous scintillators have been reported since the discovery of x-rays from the …

Detection Of Trace Heavy Metals In Water: Development Of Electrochemical Sensors, Quang Lam, Joel Mututeke

Symposium of Student Scholars

The presence of heavy metals in our ecosystem poses significant ecological and physiological consequences. As a result, numerous techniques are developed for the detection of contaminants in aqueous solutions. However, early and trace detection of such contaminants still remains a challenge. Amongst many techniques, electrochemistry driven sensors have shown promise due to their possibility of miniaturization and low-cost. Our research investigates the use of electrically conducting polymer and atomically thin carbon materials as electrodes towards the development of electrochemical sensor. Nanocomposite electrode films have been synthesized and fabricated using in-situ polymerization technique and the relationship between number of cycles of …

Branched Chain Amino Acid Strain State Monitoring With Raman Spectroscopy And Plasmonic Bowtie Nanoantenna Devices For Early Disease Detection, Caroline A. Campbell

Theses and Dissertations

This work centers on the development and the down-selection of nano-manufactured devices to be used in conjunction with Raman spectroscopy for probing a branched chain amino acid. The nano-manufactured devices integrate plasmonic nanoantennas for the purpose of amplifying molecular fingerprints, which are otherwise difficult to detect, through Surface Enhanced Raman Spectroscopy (SERS). Plasmonic nanostructures can be utilized for a variety of biomedical and biochemical applications to detect the characteristic fingerprint provided by Raman Spectroscopy. The nano-manufactured devices create an electric field that amplifies minute perturbations and raises the signal above background noise. This may provide a deeper understanding of signal …

Molecular Modeling Of High-Performance Polymers, Sagar Umesh Patil

Dissertations, Master's Theses and Master's Reports

High-performance polymers are extensively used in the aerospace and aeronautics industries due to their low density, high specific strength, and high specific stiffness. These properties along with better infiltration with reinforcements [carbon nanotubes (CNTs), glass, etc.] capability make them an excellent candidate to fabricate Polymer Matrix Composites (PMCs) tailored for specific applications. The applications range from products used daily to deep space exploration. These materials are subjected to varying temperatures and pressures during fabrication and in service. Therefore, the evolution of their intrinsic properties needs to be studied and their ability to sustain extreme environmental conditions in outer space needs …

Silver Microparticle And Submicron Wire - Polylactic Acid Composites For Additive Manufacturing, Jenna W. Robichaux

LSU New Orleans Theses and Dissertations

This thesis explores the incorporation of silver microparticle and submicron wire additives into thermoplastic filament feedstock for fused filament fabrication (FFF) to create multifunctional three-dimensional (3D) printable composites. The impact of silver microparticle and submicron wire additives on mechanical behavior along with antibacterial effect of the silver microparticle and submicron wire additives on printed objects were assessed.

Composite FFF filaments were fabricated by solution processing, granulation, and extrusion. Differential Scanning Calorimetry (DSC) was conducted to measure the glass transition and melting point temperatures of the composite filaments for 3D printing. The effect of the additive addition on the thermal properties …

Synthesis Of Polyethylene Glycol-Based Hydrogels And Silver/Gold Nanostructures For Biomedical Applications, Isabelle Ishimwe Niyonshuti

Graduate Theses and Dissertations

This work focuses on the synthesis of biocompatible polyethylene glycol (PEG)-based hydrogels, silver nanoparticles (AgNPs), and silver-gold nanocages (Ag-AuNCs) for biomedical applications. The dissertation includes two parts with Part I on the work of PEG-based hydrogel for wound healing applications and Part II on the work of Ag/Au nanostructures for antimicrobial applications. Part I studies PEG-based hydrogel for the delivery of fibroblast growth factors (FGFs) for wound healing applications, aiming to overcome the challenge of designing hydrogels capable of the sustained release of bioactive FGFs. This research develops new biocompatible anionic injectable hydrogel formulations based on Poly (Oligo Ethylene Glycol …

Oxone® Mediated Tempo-Oxidized Cellulose Nanomaterials: Material Characterization, Ultrafiltration Membrane Separations, And Thin Film Composite Gas Transport Analysis, John Phillips Moore

Graduate Theses and Dissertations

Cellulose nanomaterials (CNMs) are derived from plant matter and are comprised of nanoscopic cellulose crystals and fibers. They have a diverse set of applications, from cosmetics to oil recovery. This study focuses on the properties of Oxone® mediated TEMPO-oxidized cellulose nanomaterials (OTO-CNMs) and their use in controlling the transport properties of polymeric substrates. Synthesis and characterization of cellulosic nanoparticles have resulted in the creation of OTO-CNMs with properties that increase hydrophilicity. With added hydrophilicity, OTO-CNMs possess lower fouling propensity, making them ideal membrane additive for transport limited separations such as hemodialysis.

To utilize the material and unique properties thereof, this …

Funtionalization Of Morphologically Different Nanoclays For Enhanced Mechanical Properties, Malachi Kent

Honors College Theses

Nanoclays are microscopic clays that are comprised of layered nanoparticle aluminosilicates that are naturally arranged in several morphologies. Halloysite nanotubes (HNT) are hollow, double-layered tubes, bentonite (BNT) clays are trapezoidal platelets, and nanosilica or silica dioxide (SiO₂) are spherical. These nanoclays were chosen for sustainable purposes as they are naturally derived and for economical purposes because of their cheap commercial availability. In this study, the nanoclays are functionalized with an epoxy organosilane group through reflux conditions at 120 °C for 24 hours. The pristine and functionalized nanoclays were extensively characterized with infrared radiation (IR) spectroscopy, scanning electron microscope …

Nanocellulose Sheets From Oil Palm Empty Fruit Bunches Treated With Naoh Solution, Farah Fahma, Faiza Ayu Lestari, Ika Amalia Kartika, Nurmalisa Lisdayana, Evi Savitri Iriani

Karbala International Journal of Modern Science

The objective of this study is to produce nanocellulose sheets from oil palm empty fruit bunches (OPEFBs). Nanocellulose sheets from OPEFBs were prepared through the dewatering process using vacuum filtration. Subsequently, the produced sheets were treated with NaOH solution to improve the mechanical stability of their structure, causing them to be firm in water. The water absorption of nanocellulose sheet increased with increasing NaOH concentrations up to 20 wt%, increasing tensile strength, and Young’s modulus, but decreased when they were treated with 30 wt%. The diameter shrinkage of nanocellulose sheets was directly proportional to the NaOH concentration and soaking time. …

Multi-Level Analysis Of Atomic Layer Deposition Barrier Coatings On Additively Manufactured Plastics For High Vacuum Applications, Nupur Bihari

Dissertations, Master's Theses and Master's Reports

While hardware innovations in micro/nano electronics and photonics are heavily patented, the rise of the open-source movement has significantly shifted focus to the importance of obtaining low-cost, functional and easily modifiable research equipment. This thesis provides a foundation of open source development of equipment to aid in the micro/nano electronics and photonics fields.

First, the massive acceptance of the open source Arduino microcontroller has aided in the development of control systems with a wide variety of uses. Here it is used for the development of an open-source dual axis gimbal system. This system is used to characterize optoelectronic properties of …

Development Of Light Actuated Chemical Delivery Platform On A 2-D Array Of Micropore Structure, Hojjat Rostami Azmand, Hojjat Rostami Azmand

Dissertations and Theses

Localized chemical delivery plays an essential role in the fundamental information transfers within biological systems. Thus, the ability to mimic the natural chemical signal modulation would provide significant contributions to understand the functional signaling pathway of biological cells and develop new prosthetic devices for neurological disorders. In this paper, we demonstrate a light-controlled hydrogel platform that can be used for localized chemical delivery in a high spatial resolution. By utilizing the photothermal behavior of graphene-hydrogel composites confined within micron-sized fluidic channels, patterned light illumination creates the parallel and independent actuation of chemical release in a group of fluidic ports. The …

In Depth Characterisation Of The Biomolecular Coronas Of Polymer Coated Inorganic Nanoparticles With Differential Centrifugal Sedimentation, André Perez-Potti, Hender Lopez, Beatriz Pelaz, Abuelmagd Abdelmonem, Mahmoud G. Soliman, Ingmar Schoen, Philip M. Kelly, Kenneth A. Dawson, Wolfgang J. Parak, Zeljka Krpetic, Marco P. Monopoli

Articles

Advances in nanofabrication methods have enabled the tailoring of new strategies towards the controlled production of nanoparticles with attractive applications in healthcare. In many cases, their characterisation remains a big challenge, particularly for small-sized functional nanoparticles of 5 nm diameter or smaller, where current particle sizing techniques struggle to provide the required sensitivity and accuracy. There is a clear need for the development of new reliable characterisation approaches for the physico-chemical characterisation of nanoparticles with significant accuracy, particularly for the analysis of the particles in the presence of complex biological fluids. Herein, we show that the Differential Centrifugal Sedimentation can …

Synthesis And Characterization Of Porous Carbon Composite Derived From Biomass Waste For Supercapacitor Application, Cheng Kim Sim

Student Works (2020-2029)

Energy storage devices have gradually dominated human daily activities and indispensable to economy development such as supercapacitor and battery. There are few factors determining the performance of supercapacitor and active material is one of the crucial. Therefore, biomass such as pineapple peel (PP) and green waste (GW) were preferred and prior mixed with manganese and tin carbonate to synthesize carbon composite (PP/GW-ZMO and PP/GW-ZTO) via combustion. Brunauer–Emmett–Teller (BET) was employed to study the textural properties with the highest specific surface area obtained in PP-C (1765.92 m2g-1) and GW-C (1613.92 m2g-1). The existence of composite materials was examined using x-ray diffraction …

Graphene/Oxide Interactions With Polymer Networks Modeled Using Molecular Dynamics, Matthew Alan Reil

Electronic Theses and Dissertations

Due to its unique physical properties, graphene has shown great promise as an additive to Polymer Matrix Composites (PMCs) for material property enhancement. Achieving homogeneous dispersion of the graphene platelets within a polymeric network is critical to realizing these enhancements. Research has shown that achieving homogeneous dispersion of graphene platelets within PMCs is challenging as graphene is immiscible with most polymeric networks. This work used Molecular Dynamics (MD) simulations to demonstrate dispersion of graphene platelets within PMCs is inhibited by molecular surface charge potentials. Further simulations were conducted to demonstrate functionalized forms of graphene, specifically graphene oxide, have altered surface …