Other Materials Science and Engineering Commons^™

Effects Of Foam Type And Thickness On Impact Resistance, Thermal Insulation, And Cost-Effectiveness Of Medical Containers For Drone Delivery, Josh Henry C. Soriano, Eriel V. Fonte, Lambertsus S. Novera, Nicolai Paolo B. Villarin, Joel B. Jalon, Jr.

Sinaya: A Philippine Journal for Senior High School Teachers and Students

Accessible healthcare remains a challenge for rural communities lacking reliable infrastructure for medical supply delivery. Delivery drones have recently emerged as a viable alternative, dropping medical containers during flight. However, the effectiveness of different foam types and thicknesses combined with corrugated cardboard as shock-absorbing materials in a medical container for delivery drones has yet to be tested. Thus, this study designed cost-effective containers using corrugated cardboard and multiple foam types and thicknesses, aiming to preserve the integrity of the contents, withstand impact, and control temperatures. Four foam types—polystyrene, polyurethane, polyethylene, and expanded polystyrene (EPS) —were tested at 1 cm, 2 …

Effect Of Niobium Addition On Corrosion Behavior, Mechanical Properties, And Microstructures Of U6zr Alloys In An Aerated Environment, Masrukan Masrukan, Djati Handoko, Dede Djuhana, Rohmad Sigit, M. Husna Al Hasa, Wisnu Ari Adi, Siti Mardiah

Makara Journal of Science

The effect of Nb addition on the corrosion behavior of U–6Zr alloys within an aerated, demineralized water (DW) environment (pH 5.61) and its correlation of this addition with the mechanical and microstructural properties of the alloys were investigated. The U–6Zr–xNb alloys (x = 1, 4, and 7 wt.%) were synthesized by arc-melting U, Zr, and Nb. Additionally, the samples were mounted and polished, after which they were subjected to electrochemical corrosion analysis using a potentiostat. This evaluation was conducted in a DW medium (pH 5.6), representing an aerated atmosphere, at room temperature (27°C) and a potentiodynamic scan rate of 1 …

An Overview Of Biomass-Derived Graphene Oxide And Its Characteristics For Future Sustainable Applications, Afif Wardana, Ahmad Nabil Shahab, Donanta Dhaneswara, Nofrijon Sofyan

Journal of Materials Exploration and Findings

The production of graphene oxide (GO) from biomass presents considerable promise as a sustainable alternative substitute for traditional semiconductors. Biomass waste, abundant and often underutilized worldwide, is distinguished by its high carbon content and regenerative characteristics, rendering it an optimal resource for sustainable material production. By heating its biopolymers, lignocellulosic biomass can be used as a new material to make graphene, which forms three-dimensional turbostratic crystallites. These crystallites, composed of partially defective aromatic carbon sheets with graphite-like characteristics, make it easier to create GO with specialized functions for cutting-edge applications. Its capability underscores the revolutionary potential of biomass waste in …

Production Of Rare Earth Elements By Molten-Salt Electrolysis, Mohammed Moro

Graduate Theses & Non-Theses

Rare earth elements (REEs) are indispensable, high-value resources that play a crucial role in renewable energy, defense systems and advanced technological systems. REEs are commonly extracted from natural ores or recycled materials such as permanent magnets using hydrometallurgical or pyrometallurgical techniques. In hydrometallurgy, the REE source is leached with acid, followed by solvent extraction and precipitation steps to obtain rare earth compounds like oxides and fluorides. Pyrometallurgy involves dissolving rare earth compounds in a molten halide bath, followed by high-temperature electrolysis to convert them into metals, which are then recovered at the cathode. This process typically includes melting, refining, and …

In-Situ Investigations Of Calcium-Magnesium-Aluminosilicates (Cmas) Infiltration Effects On Thermal Barrier Coatings Under Extreme Environments Replicating Jet Engines, Zachary Stein

Doctoral Dissertations and Master's Theses

Calcium-magnesium-aluminosilicate (CMAS) particulates, such as sand or volcanic ash, are ingested by gas turbine jet engines during operation. When operating within high abundance regions, these particulates negatively interact and degrade the high temperature thermal barrier coatings (TBC) protecting underlying superalloy turbine blades vital to engine operation. These CMAS particulates melt within the engine and infiltrate into the ceramic coatings. In electron-beam physical vapor deposited (EB-PVD) TBCs, the CMAS within the intercolumnar gaps stiffens the coatings and causes thermomechanical induced high stress concentrations, risking crack formation. While molten, the CMAS thermochemically alters and destabilizes the coating, also risking coating failure. Premature, …

Integrating Dft And Machine Learning To Predict Structural Properties In High Entropy Alloys, Nathan Linton

All Dissertations

In the past decade, a paradigm shift in the design of metal alloys has been observed. These new alloys are commonly referred to as high entropy alloys (HEAs), multi-principal element alloys (MPEAs), or complex, concentrated alloys (CCAs). In contrast to conventional alloys, which consist of one main element (for example 80%) with other elements in small amounts, HEAs are made of four or more main elements ranging from 5 to 35% each element. Due to the large presence of multiple elements, HEAs have shown substantial material property improvements over conventional alloys such as steel. For example, they have high ductility …

Emerging Solid Electrolytes For Solid-State Sodium Batteries: Synthesis And Interface Study., Xiaolin Guo

Electronic Theses and Dissertations

Over the past decade, solid-state batteries have attracted significant attention as the next-generation energy storage technology due to their higher energy density and enhanced safety. Given the abundant sodium (Na) resources relative to lithium (Li), the development of sodium-based batteries has become increasingly compelling. Within a solid-state battery, the solid electrolytes (SEs) serve the dual function of (i) electronically insulating and physically separating the electrodes, and (ii) transporting ions between the anode and cathode. To meet these essential requirements, ideal SEs must process high ionic conductivity with negligible electronic conductivity, robust structural and chemical stability, a wide electrochemical window, and …

Few-Layered Conductive Graphene Foams For Electrical Transdifferentiation Of Mesenchymal Stem Cells Into Schwann Cell-Like Phenotypes, Ekin G. Simsar, Peifu Cheng, Tugce Dogruel, Maxsam Donta, Juhyung Jung, Naomi A. Asante, Donald S. Sakaguchi, Surya K. Mallapragada, Piran R. Kidambi, Metin Uz

Chemical & Biomedical Engineering Faculty Publications

This study investigates the potential of few-layered conductive graphene foams as 3D platforms for the electrical transdifferentiation of mesenchymal stem cells (MSCs) into Schwann cell (SC)-like phenotypes for peripheral nerve injury (PNI) treatment. The 3D graphene foams (3D-GF) are cytocompatible with MSCs and created a favorable microenvironment for the cells to attach, grow, proliferate, and transdifferentiate. We demonstrated that MSCs cultured within 3D-GF can be transdifferentiated into SC-like phenotypes using the synergistic effects of electrical stimulation and 3D porous and conductive structure. Our immunocytochemistry and gene expression analyses showed the expression of Schwann cell markers and enhanced secretion of growth …

Engaging Students In Materials Engineering Through A Marble-Based Property Ranking Game, Nathan Cloughley, Alyssa Felix

College of Engineering Summer Undergraduate Research Program

This SURP proposal is centered on the design and development of a Materials Marbles Game, an educational tool designed to introduce students to materials science and materials selection through tactile interaction and hands-on experimentation. The game will incorporate measurement of key material properties—such as mechanical, thermal, electrical, and mass density—using spherical marbles made from different materials. These measurements will then be used to construct a physical Material Property Chart (Ashby-Cebon plot) on a game board, fostering a hands-on, embodied understanding of how different materials behave. The game will also illustrate the thought process behind materials selection, a critical aspect of …

Hydrogen Embrittlement In Shot-Peened Steel, Jia-Huei Tien, David R. Johnson, David Bahr

15th International Conference on Shot Peening

This work investigates the role of shot peening on hydrogen embrittlement resistance in quenched and tempered 1070 steel. Thermal desorption spectroscopy results revealed that shot-peened specimens contained nearly twice the hydrogen (H) content of unpeened samples when charged under the same electrochemical conditions, suggesting the introduction of additional trapping sites occur during peening. The mechanism underlying this behavior can be associated with increased dislocation density and is more consistent with the HELP mechanism. Residual stress measurements show a significant relaxation of compressive stresses in shot-peened specimen after H charging, indicating H enhanced dislocation rearrangement. Both unpeened and peened specimens exhibited …

Comparison Of Peening Effect Between Additive Manufacutred And Drawing Titanium Alloy, Hitoshi Soyama

15th International Conference on Shot Peening

Although additively manufactured (AM) metals are attractive materials, their remarkable weak fatigue properties are an obstacle to their practical application. Thus, post-processing to improve their fatigue properties is required. In the present study, powder bed fusion using laser sintering titanium alloy, i.e., PBF-LS/Ti6Al4V was treated by shot peening (SP), submerged laser peening (SLP), cavitation peening (CP), and fine particle bombarding (FPB), then the fatigue properties were investigated by a torsional fatigue test, comparing with drawing Ti6Al4V. It was revealed that the fatigue strength at 10⁷ was 446 ± 5 MPa for PBF-LS/Ti6Al4V treated by FPB+CP, 359 ± 9 MPa …

Adaptation Of Shot Peen Parameters For Gear Geometry, David J. Breuer, Beth Matlock

15th International Conference on Shot Peening

Shot peening is a well established process for the surface enhancement of gearing. Gearing is a primary example of a high cycle fatigue application that can benefit from residual stress enhancement. Designing shot peening parameters to specific gear geometry based on material, heat treatment, and surface finish is a more precise way to achieve better performance outcomes. One of the best tools to assist in the optimal shot peening is x-ray diffraction (XRD) and its ability to measure small differences that can result in significant performance outcomes. XRD residual stress measurements are a direct measurement of elastic strain. The diffraction …

E-Strip® Peening Intensity Sensor - Linearity, Variability And Connectivity, Sylvain A. Forgues, Brigitte Labelle, Ramzi Ben Moussa, Sebastien Beaugrand, Raphael Sarraillon, Sergio Amaya

15th International Conference on Shot Peening

This paper presents the E-Strip®, a novel electronic sensor developed by Shockform to digitally measure shot peening intensity at the part level. Motivated by the limitations of traditional Almen strips—namely, manual handling, time consumption, and susceptibility to human error—the E-Strip® offers a faster, more reliable, and connected alternative. Extensive testing confirmed the E-Strip® output maintains excellent linearity with Almen intensity across a wide range of media and impact levels (R² > 0.997), and its adjustable sensitivity ensures compatibility from low to high intensities. Variability studies showed the E-Strip® provides similar or better consistency than Almen strips at low intensities, although higher …

The Effects Of Shot Peening Highly Loaded Compression Springs, David J. Breuer

15th International Conference on Shot Peening

The compression spring in this test study is typical of one used in a demanding off-road vehicle suspension. The cyclic loads applied during fatigue tests were severe enough to cause failure in approximately 11,000 cycles without shot peening.

The objectives of this study were the following: (1) Design a compression spring similar to those used in the off-road recreational industry. (2) Design & manufacture a fatigue test stand that could withstand high loads for months of testing. (3) Generate a matrix of shot peening treatments to produce different amounts of residual compressive stress. (4) Measure the shot peening residual compressive …

Effect Of Contact Time And Concentration On Adsorption Of Pb2+Metal Ion Utilizing Crab Shell Chitosan And Activated Bentonite Clay Composite, Nia Sasria, Adi Wisaka, Ade Wahyu Yusariarta Putra Parmita, Gusti Umindya Nur Tajalla

Makara Journal of Technology

Indonesia produced 1,508 tons of nonliving crabs in the January–March 2020 period. The number of shells generated can account for 40%–60% of the overall weight. Therefore, using crab shells made into chitosan is expected to increase the economic value and reduce waste from crab shells. Chitosan can be modified with clay previously activated with an acid solution to form a chitosan–clay composite to improve the adsorption capacity. This study aims to analyze the differences in characteristics between chitosan and clay before and after the immobilization process. A comparison of chitosan and clay (1:2) is conducted on the basis of variations …

Fabrication Of Transparent Conducting Electrodes By Chemical Approaches & Their Application Towards Sensing And Energy Storage, Namuni Sneha

Theses and Dissertations

In the intelligent era, there is a growing demand for developing highly efficient and robust wearable electrodes through simple chemical approaches. We developed highperforming transparent electrodes using interconnected Au nanoparticle networks via a simple liquid-liquid interface approach that offers high conductivity, transparency (>85%), and mechanical durability. Additionally, the prepared electrodes exhibit tunable transmittance and sheet resistance, and the method was also adaptable to various substrates without harsh chemical or thermal treatments.

Furthermore, using Au 1L (1-layer) nanonetwork, a highly transparent breath sensor is fabricated with short response and recovery times (1.1 s and 1.3 s). The Au-1L sensor is …

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Correlation Between Microstructure And Hardfacing Properties With Welding Current Intensity In Reconditioned Low-Alloy Steel Material Using Submerged Arc Welding (Saw) : A Comprehensive Review, Iman Nugraha Asmara, Winarto Winarto

Journal of Materials Exploration and Findings

This review studying the correlation between microstructural transformations and mechanical properties in reconditioned low-allow steel material, focusing on the impact of Submerged Arc Welding (SAW) parameters, especially current, on microstructure . The study highlights how variation on welding parameters, especially current intensity variation, affecting microstructural transformations, hardness, and wear resistance of hardfaced layers. Key aspects such as dilution effect, phases distribution, and carbide formation are reviewed to understanding their impact on mechanical properties. By reviewing insights from existing literature and experimental findings, this review underscores the role of Submerged Arc Welding in enhancing mechanical properties and microstructural of low-alloy steel …

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO₂ emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

Crevice Corrosion Mechanisms Of Cocrmo Alloys In Orthopedic Implants: Retrieval Analysis, Nano-Tribocorrosion And Cellular Responses, Hwaran Lee

All Dissertations

Mechanically assisted corrosion and non-mechanically (chemically) driven corrosion in modular junctions of orthopedic implants using cobalt-chromium-molybdenum (CoCrMo) alloys remain clinical concerns and may contribute to implant failure. The underlying corrosion mechanisms are not yet fully understood, leaving a critical research gap. We hypothesized that corrosion in modular junctions may be driven by aggressive local environments, including fretting, metal ion release (cobalt ion, Co²⁺), low pH and reactive oxygen species (ROS). This dissertation aims to (1) analyze corrosion modes and potential causes in modular junctions; (2) identify chemically driven corrosion modes on CoCrMo alloys using simulated inflammatory modular taper …

Shape Memory Behavior In Medium To High Entropy Shape Memory Alloys: Design, Prediction, And Experimental Analysis, Hatim Raji

Theses and Dissertations

This dissertation provides a data-driven system integrating synthetic data generation and machine learning (ML) techniques to create multicomponent SMA compositions with specific transformation temperatures (TTs). Models were trained to represent the nonlinear dependencies influencing martensitic transformation behavior by using elemental, thermodynamic, and process-related aspects. The capacity of the ML models on medium entropy NiTiHfPd and high entropy NiTiHfZrCu systems accuracy was confirmed by experimental validation showing TTs closely matched with model outputs.

Advancing Multi-Physics Modeling For Microwave Heating: Application In Micro-Reactor Design And Optimization, Raghav Adhikari

All Theses

Microreactors are a type of small-scale chemical reactors for achieving reduced volume, improved product selectivity and higher reaction rate. It allows precise temperature control, which is crucial for sensitive chemical processes. Microreactors can be employed as key components of conducting small-scale reactions with improved reactor configuration and process efficiency. It is important to identify a localized and precise heating mechanism to trigger and control the corresponding chemical reactions.

In fact, microwave heating has gathered significant attention in recent years due to its ability to deliver efficient, rapid, and localized heating, which can accelerate reaction rates and enhances the reaction selectivity. …

Synthesis And Characterization Of Magnetic Nanoparticles To Study Effective Magnetic Anisotropy For Biomedical And Catalytic Applications, Alexander Malaj

All Dissertations

This dissertation focuses on understanding how to tune the magnetic properties of nanoparticles through controlling the effective magnetic anisotropy (Keff), which is a key variable in determining a nanoparticle’s Néel relaxation time, which will dictate its magnetic behavior in various applications. In this work, magnetocrystalline anisotropy is tuned by synthesizing tri-metallic substituted ferrite (Fe3-x-yMnxCoyO4) nanoparticles with specific metallic compositions that were informed by computer simulations using density functional theory (DFT) to target magnetocrystalline anisotropy values. A drip synthesis was used to control the size and composition of the tri-metallic ferrites, which were revealed to be monodisperse and compositionally mixed by …

Understanding The Metallic And Oxide Phases In Platinum-Based Bimetallic Heterogeneous Catalysts After High-Temperature Oxidation, Stephen John Porter Jr

Nanoscience and Microsystems ETDs

Platinum (Pt) and palladium (Pd) are critical components in diesel emission control systems, enabling the conversion of harmful pollutants under demanding conditions. However, Pt’s effectiveness is hindered by sintering under high-temperature oxidizing environments. This dissertation investigates how Pt and Pd evolve under oxidizing conditions at 800°C, highlighting their distinct thermodynamic behaviors and interactions. Using TEM, EDS, EELS, XRF, XRD, and EXAFS, we show that Pd suppresses Pt sintering by reducing the volatility of PtO₂, leading to the formation of stable particles. Both Pt and Pd are present in metallic and oxide states, forming biphasic 'Janus' particles with conjoined metal and …

Magnetically Impelled Arc Butt Welding And Straight Tube Butt Welding Analysis Of Boiler Grade Tube Joints, Santhosh Kumar S

Theses and Dissertations

Boiler-graded tubes of T11, T12, T91, and T92 materials with a thickness of 4.5 mm thick and 44.5 mm outer diameter were selected for the Straight Tube Butt Welding process using Hot Wire (STBW-HW) and Cold Wire (STBW-CW) conditions. Moreover, the research investigates and compares the welding characteristics of dissimilar T11 and T91 boiler-graded tubes using STBW - HW & Magnetically Impelled Arc Butt (MIAB) welding techniques. Similar and dissimilar welding was performed in STBW – HW & CW conditions.

In dissimilar welding, the tensile strength was higher in the T11-T91 STBWHW joints of 663 MPa than in the T12-T92 …

Pd-Based Hydrogen Separation Membranes Synthesized Via A Liquid-Phase Route, Chase W. Thompson

Chemical and Biological Engineering ETDs

Palladium (Pd) membranes have gained significant attention for their ability to selectively separate hydrogen, a critical process for clean energy applications such as fuel cells and hydrogen storage. However, challenges such as grain growth, sintering, hydrogen embrittlement, and film uniformity limit their scalability and long-term stability. This thesis focuses on the controlled synthesis, deposition, and stability of Pd nanoparticles to optimize membrane performance for hydrogen separation. This work investigates solution-phase synthesis of Pd nanoparticles, focusing on temperature, precursor concentration, and solvent composition as key variables influencing particle growth and dispersion. Pd membranes were fabricated using nanoparticle deposition onto porous supports, …

Synthesis And Characterization Of Temperature- And Ph-Responsive Pia-B-Pnipam@Fe3O4 Nanocomposites, Swati Kumari, Cayla Cook, Fatema Tarannum, Erick Salvador Vasquez-Guardado, Olufemi Ogunjimi, Keisha B. Walters

Chemical and Materials Engineering Faculty Publications

Stimuli-responsive polymers (SRPs) have garnered significant attention in recent decades due to their immense potential in biomedical and environmental applications. When these SRPs are grafted onto magnetic nanoparticles, they form multifunctional nanocomposites capable of various complex applications, such as targeted drug delivery, advanced separations, and magnetic resonance imaging. In this study, we employed a one-step hydrothermal method using 3-aminopropyltrimethoxysilane (APTES) to synthesize APTES-modified Fe₃O₄ nanoparticles (APTES@Fe₃O₄) featuring reactive terminal amine groups. Subsequently, via two consecutive surface-initiated atom transfer radical polymerizations (SI-ATRP), pH- and temperature-responsive polymer blocks were grown from the Fe₃O …

A Review On The Use Of Salt And Sugar As Natural Admixtures In Concrete, Noura A. Yassine, Lelian W. Elkhatib, Adel Elkordi, Mohammed Sonebi, Jamal Khatib

BAU Journal - Science and Technology

Due to the large increase in construction nowadays, the focus on the reduction of waste in the environment and saving cost becomes crucial. This issue, if solved, will conserve natural materials and make an eco-friendly environment. According to this, the use of natural materials, specifically in concrete/mortar, will shape a green and sustainable environment. One of the most used materials in construction is concrete where some additives like accelerators and retarders are added in order to enhance and modify some properties of concrete. These additives are beneficial and important to be used specifically in case of different weather conditions. Weather …

Magnetic Nanoparticles: Synthesis And Applications In Life Sciences, Kishore Chand, Erick Salvador Vasquez

Chemical and Materials Engineering Faculty Publications

Magnetic nanoparticles (MNPs) are multifunctional materials with superparamagnetic properties and tunable surface chemistries, making them valuable across diverse fields, such as biomedicine, environmental remediation, and agriculture. This review examines recent advancements in MNP synthesis, encompassing chemical, physical, and environmentally friendly methods while highlighting improvements in size, morphology, and composition control that enhance application-specific performance and environmental sustainability. The review discusses various architectures, including single-core, core–shell, hybrid composites, and stimuli–responsive systems, with an emphasis on their stability, scalability, and functionalization potential. In biomedical applications, MNPs show promise in targeted drug delivery, magnetic hyperthermia, and magnetic resonance imaging contrast enhancement, where biocompatibility, …

Systematic Review: Recent Developments In Magnetic-Nanoparticle-Based Dna Extraction, Stanley Evander Emeltan Tjoa, Mudasir Mudasir, Edi Suharyadi, Budi Setiadi Daryono

Makara Journal of Science

Deoxyribonucleic acid (DNA) is a research object for various molecular fields of study, and DNA extraction is a basic procedure in molecular biology laboratories. DNA extraction methods are evolving, from several steps using organic solvents to recent technology using magnetic nanoparticles as adsorbents for the purification step. The use of magnetic nanoparticles for DNA extraction is magnetizing because it is simple without heavy machinery, such as centrifugation and organic solvents. The application of this method is extensive and diverse. This systematic review summarizes current development trends for some aspects of this DNA extraction system from the magnetic nanoparticle synthesis method, …