Open Access. Powered by Scholars. Published by Universities.®

Other Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Journal

Discipline
Institution
Keyword
Publication Year
Publication

Articles 1 - 30 of 51

Full-Text Articles in Other Materials Science and Engineering

A Basic Review Of Design And Material Selection For Shovel’S Body, Anggi Buana, Winarto Winarto Aug 2026

A Basic Review Of Design And Material Selection For Shovel’S Body, Anggi Buana, Winarto Winarto

Journal of Materials Exploration and Findings

Manual shovels still play an important role in construction and agricultural work, selecting the right material is crucial to obtain a shovel body that has structural reliability, ergonomic efficiency, and sustainability. In this study, a method for selecting the most suitable material will be discussed by combining functional analysis (Ashby's material performance index, and the Multi-Criteria Decision Making approach). From the figure of load, material index is formulated as a reference for performance property requirements. Using data from analysis software and qualitative data, eight performance criteria such as durability, corrosion resistance, cost, and environmental impact are then weighted using the …

Go to article

Optimization Of Aluminum Coating Deposition Parameters To Enhance The Performance Of Automotive Headlamps, Gulirano Saidakhmedova, Giovanni Maizza Jul 2026

Optimization Of Aluminum Coating Deposition Parameters To Enhance The Performance Of Automotive Headlamps, Gulirano Saidakhmedova, Giovanni Maizza

Technical science and innovation

The paper investigates the influence of the optical characteristics of functional coatings applied to automotive reflectors on vehicle active safety parameters, with a focus on the range and intensity of road illumination. The study examines the mathematical relationship between the maximum luminous intensity of a headlamp, the object detection distance, and the reflection coefficient  of an aluminium layer deposited via vacuum thermal evaporation. The main factors driving the degradation of surface reflectivity (including oxidation, thermal degradation of the base coat, and surface roughness) are analysed. It is demonstrated that a decrease in the reflection coefficient during operation directly impairs the …

Go to article

The Role Of Zinc Precursor Concentration In Modulating The Structural, Optical, And Electrical Properties Of Sol-Gel Derived Czts Thin Films, Justine John Tibaijuka Jun 2026

The Role Of Zinc Precursor Concentration In Modulating The Structural, Optical, And Electrical Properties Of Sol-Gel Derived Czts Thin Films, Justine John Tibaijuka

Tanzania Journal of Science

This study reports on CZTS thin films fabricated by sol–gel spin coating using zinc acetate dihydrate, copper acetate dihydrate, tin chloride, and thiourea dissolved in methanol with monoethylamine as a stabilizer. The films were annealed rapidly at 540 °C by using an RTP furnace. Results show the significant influence of zinc concentration on films’ properties with band gap evolution between 1.46 and 1.7 eV, along with high absorption coefficients exceeding 10⁴ cm⁻¹ in the visible range. Structurally, the films evolved from poorly crystalline at low Zn content to well- crystallized, (112)-oriented kesterite near stoichiometry. However, excessive Zn caused slight degradation …

Go to article

Lafe0.925ti0.075o3 Perovskite Coated With Ethyl Cellulose: A High-Stability, Low-Hysteresis Platform For Advanced Humidity Sensing, Akhmad Futukhillah Fataba Alaih, Djoko Triyono, Rifqi Almusawi Rafsanjani Jun 2026

Lafe0.925ti0.075o3 Perovskite Coated With Ethyl Cellulose: A High-Stability, Low-Hysteresis Platform For Advanced Humidity Sensing, Akhmad Futukhillah Fataba Alaih, Djoko Triyono, Rifqi Almusawi Rafsanjani

Makara Journal of Science

Humidity sensors are pivotal in numerous sectors, such as environmental monitoring, industrial automation, and health-care. This study presents the fabrication and detailed evaluation of an advanced humidity sensor using ethyl cellulose (EC)-coated LaFe0.925Ti0.075O3 (LFTO) perovskite nanoparticles synthesized via the sol-gel method. The LFTO nanopar-ticles exhibited a mesoporous structure with an enhanced surface area, which significantly improved their moisture adsorption capabilities. The innovative application of EC coating addresses critical substrate adhesion issues, enhancing mechanical stability without compromising sensor sensitivity. Comprehensive performance evaluations revealed minimal hysteresis (

Go to article

A Sustainable Approach To Tensile Property Enhancement In Sand Casting Via Metal Chip–Sand Composite Molds, Maaruf Isyaku, Danjuma Saleh Yawas, Mathew Olatunde Afolayan, Terva Ause Apr 2026

A Sustainable Approach To Tensile Property Enhancement In Sand Casting Via Metal Chip–Sand Composite Molds, Maaruf Isyaku, Danjuma Saleh Yawas, Mathew Olatunde Afolayan, Terva Ause

Journal of Materials Exploration and Findings

The present work focuses on the study of the effect of adding different weight percentages and particle sizes of various metal chips to foundry sand on the tensile strength of aluminum alloy castings, utilizing Taguchi's optimization methodology and regression analysis. Characterization techniques such as X-ray fluorescence (XRF), thermogravimetry, and SEM were also used. The XRF analysis identified aluminum (76.61%), silicon (17.49%), and magnesium (1.28%) as the major elements in the aluminum alloy engine block. For the foundry sand, silicon (89.51%), phosphorus (7.41%), and potassium (1.7%) were found. In contrast, the major constituents in cast iron included iron (88.3%), carbon (3.7%), …

Go to article

Effects Of Foam Type And Thickness On Impact Resistance, Thermal Insulation, And Cost-Effectiveness Of Medical Containers For Drone Delivery, Josh Henry C. Soriano, Eriel V. Fonte, Lambertsus S. Novera, Nicolai Paolo B. Villarin, Joel B. Jalon, Jr. Dec 2025

Effects Of Foam Type And Thickness On Impact Resistance, Thermal Insulation, And Cost-Effectiveness Of Medical Containers For Drone Delivery, Josh Henry C. Soriano, Eriel V. Fonte, Lambertsus S. Novera, Nicolai Paolo B. Villarin, Joel B. Jalon, Jr.

Sinaya: A Philippine Journal for Senior High School Teachers and Students

Accessible healthcare remains a challenge for rural communities lacking reliable infrastructure for medical supply delivery. Delivery drones have recently emerged as a viable alternative, dropping medical containers during flight. However, the effectiveness of different foam types and thicknesses combined with corrugated cardboard as shock-absorbing materials in a medical container for delivery drones has yet to be tested. Thus, this study designed cost-effective containers using corrugated cardboard and multiple foam types and thicknesses, aiming to preserve the integrity of the contents, withstand impact, and control temperatures. Four foam types—polystyrene, polyurethane, polyethylene, and expanded polystyrene (EPS) —were tested at 1 cm, 2 …

Go to article

Effect Of Niobium Addition On Corrosion Behavior, Mechanical Properties, And Microstructures Of U6zr Alloys In An Aerated Environment, Masrukan Masrukan, Djati Handoko, Dede Djuhana, Rohmad Sigit, M. Husna Al Hasa, Wisnu Ari Adi, Siti Mardiah Dec 2025

Effect Of Niobium Addition On Corrosion Behavior, Mechanical Properties, And Microstructures Of U6zr Alloys In An Aerated Environment, Masrukan Masrukan, Djati Handoko, Dede Djuhana, Rohmad Sigit, M. Husna Al Hasa, Wisnu Ari Adi, Siti Mardiah

Makara Journal of Science

The effect of Nb addition on the corrosion behavior of U–6Zr alloys within an aerated, demineralized water (DW) environment (pH 5.61) and its correlation of this addition with the mechanical and microstructural properties of the alloys were investigated. The U–6Zr–xNb alloys (x = 1, 4, and 7 wt.%) were synthesized by arc-melting U, Zr, and Nb. Additionally, the samples were mounted and polished, after which they were subjected to electrochemical corrosion analysis using a potentiostat. This evaluation was conducted in a DW medium (pH 5.6), representing an aerated atmosphere, at room temperature (27°C) and a potentiodynamic scan rate of 1 …

Go to article

An Overview Of Biomass-Derived Graphene Oxide And Its Characteristics For Future Sustainable Applications, Afif Wardana, Ahmad Nabil Shahab, Donanta Dhaneswara, Nofrijon Sofyan Dec 2025

An Overview Of Biomass-Derived Graphene Oxide And Its Characteristics For Future Sustainable Applications, Afif Wardana, Ahmad Nabil Shahab, Donanta Dhaneswara, Nofrijon Sofyan

Journal of Materials Exploration and Findings

The production of graphene oxide (GO) from biomass presents considerable promise as a sustainable alternative substitute for traditional semiconductors. Biomass waste, abundant and often underutilized worldwide, is distinguished by its high carbon content and regenerative characteristics, rendering it an optimal resource for sustainable material production. By heating its biopolymers, lignocellulosic biomass can be used as a new material to make graphene, which forms three-dimensional turbostratic crystallites. These crystallites, composed of partially defective aromatic carbon sheets with graphite-like characteristics, make it easier to create GO with specialized functions for cutting-edge applications. Its capability underscores the revolutionary potential of biomass waste in …

Go to article

Effect Of Contact Time And Concentration On Adsorption Of Pb2+Metal Ion Utilizing Crab Shell Chitosan And Activated Bentonite Clay Composite, Nia Sasria, Adi Wisaka, Ade Wahyu Yusariarta Putra Parmita, Gusti Umindya Nur Tajalla Aug 2025

Effect Of Contact Time And Concentration On Adsorption Of Pb2+Metal Ion Utilizing Crab Shell Chitosan And Activated Bentonite Clay Composite, Nia Sasria, Adi Wisaka, Ade Wahyu Yusariarta Putra Parmita, Gusti Umindya Nur Tajalla

Makara Journal of Technology

Indonesia produced 1,508 tons of nonliving crabs in the January–March 2020 period. The number of shells generated can account for 40%–60% of the overall weight. Therefore, using crab shells made into chitosan is expected to increase the economic value and reduce waste from crab shells. Chitosan can be modified with clay previously activated with an acid solution to form a chitosan–clay composite to improve the adsorption capacity. This study aims to analyze the differences in characteristics between chitosan and clay before and after the immobilization process. A comparison of chitosan and clay (1:2) is conducted on the basis of variations …

Go to article

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi Aug 2025

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Go to article

Correlation Between Microstructure And Hardfacing Properties With Welding Current Intensity In Reconditioned Low-Alloy Steel Material Using Submerged Arc Welding (Saw) : A Comprehensive Review, Iman Nugraha Asmara, Winarto Winarto Aug 2025

Correlation Between Microstructure And Hardfacing Properties With Welding Current Intensity In Reconditioned Low-Alloy Steel Material Using Submerged Arc Welding (Saw) : A Comprehensive Review, Iman Nugraha Asmara, Winarto Winarto

Journal of Materials Exploration and Findings

This review studying the correlation between microstructural transformations and mechanical properties in reconditioned low-allow steel material, focusing on the impact of Submerged Arc Welding (SAW) parameters, especially current, on microstructure . The study highlights how variation on welding parameters, especially current intensity variation, affecting microstructural transformations, hardness, and wear resistance of hardfaced layers. Key aspects such as dilution effect, phases distribution, and carbide formation are reviewed to understanding their impact on mechanical properties. By reviewing insights from existing literature and experimental findings, this review underscores the role of Submerged Arc Welding in enhancing mechanical properties and microstructural of low-alloy steel …

Go to article

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor Aug 2025

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO2 emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

Go to article

A Review On The Use Of Salt And Sugar As Natural Admixtures In Concrete, Noura A. Yassine, Lelian W. Elkhatib, Adel Elkordi, Mohammed Sonebi, Jamal Khatib Jun 2025

A Review On The Use Of Salt And Sugar As Natural Admixtures In Concrete, Noura A. Yassine, Lelian W. Elkhatib, Adel Elkordi, Mohammed Sonebi, Jamal Khatib

BAU Journal - Science and Technology

Due to the large increase in construction nowadays, the focus on the reduction of waste in the environment and saving cost becomes crucial. This issue, if solved, will conserve natural materials and make an eco-friendly environment. According to this, the use of natural materials, specifically in concrete/mortar, will shape a green and sustainable environment. One of the most used materials in construction is concrete where some additives like accelerators and retarders are added in order to enhance and modify some properties of concrete. These additives are beneficial and important to be used specifically in case of different weather conditions. Weather …

Go to article

Systematic Review: Recent Developments In Magnetic-Nanoparticle-Based Dna Extraction, Stanley Evander Emeltan Tjoa, Mudasir Mudasir, Edi Suharyadi, Budi Setiadi Daryono Jun 2025

Systematic Review: Recent Developments In Magnetic-Nanoparticle-Based Dna Extraction, Stanley Evander Emeltan Tjoa, Mudasir Mudasir, Edi Suharyadi, Budi Setiadi Daryono

Makara Journal of Science

Deoxyribonucleic acid (DNA) is a research object for various molecular fields of study, and DNA extraction is a basic procedure in molecular biology laboratories. DNA extraction methods are evolving, from several steps using organic solvents to recent technology using magnetic nanoparticles as adsorbents for the purification step. The use of magnetic nanoparticles for DNA extraction is magnetizing because it is simple without heavy machinery, such as centrifugation and organic solvents. The application of this method is extensive and diverse. This systematic review summarizes current development trends for some aspects of this DNA extraction system from the magnetic nanoparticle synthesis method, …

Go to article

Using Predictive Analytics To Reduce Small Business Cost Estimation Error, Diana Solt May 2025

Using Predictive Analytics To Reduce Small Business Cost Estimation Error, Diana Solt

Journal of Applied Packaging Research

Small and medium packaging companies generally employ the use of custom-developed quoting programs to bid goods and services. Custom bid programs (e.g. Excel) are used to capture the company-specific costs of production. The inputs of variable costs, such as machine rate and scrap rate, are critical to get correct; however, companies often rely on educated guesses and industry expertise to quote packaging products to end-users. Due to the guesswork involved there can be a financial difference between the quoted costs and actual costs. This variance is often the cause of significant lost dollars. Price, if not determined correctly, could negatively …

Go to article

Characteristics Of Carbonaceous Materials Synthesized From Palm Oil Empty Fruit Bunch Waste Using Ferrocene Catalyst, Ahmad Nabil Shahab, Adinda Izzatul Islam, Afif Wardana, Ilham Nur Dimas Yahya, Ary Yanuar Tri Amalia, Nofrijon Sofyan, Donanta Dhaneswara May 2025

Characteristics Of Carbonaceous Materials Synthesized From Palm Oil Empty Fruit Bunch Waste Using Ferrocene Catalyst, Ahmad Nabil Shahab, Adinda Izzatul Islam, Afif Wardana, Ilham Nur Dimas Yahya, Ary Yanuar Tri Amalia, Nofrijon Sofyan, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The synthesis of carbonaceous materials for reduced graphene oxide (rGO) precursors using oil palm empty fruit bunches waste as a carbon source offers a sustainable solution for waste management in the palm oil industry while delivering high-performance materials. The oil palm empty fruit bunches were carbonized, followed by acid washing, pyrolysis with ferrocene (8%, 12%, and 16% variations), and ultrasonication to produce rGO. The structural, electronic, and morphological properties of the rGO were analyzed using various characterization techniques. The band gap values decreased with increasing ferrocene concentration, from 1.14 eV (8%) to 1.06 (16%), indicating enhanced electronic conductivity. XRD analysis …

Go to article

Impact Of Repeated Washing Cycles On Surface Integrity And Mechanical Properties Of Glass Bottles, Siwat Patamakam Mr., Thitisilp Kijchavengkul, Siriyupa Netramai, Gong Yaijam Apr 2025

Impact Of Repeated Washing Cycles On Surface Integrity And Mechanical Properties Of Glass Bottles, Siwat Patamakam Mr., Thitisilp Kijchavengkul, Siriyupa Netramai, Gong Yaijam

Journal of Applied Packaging Research

Glass bottles are a top choice in the global beverage industry, but their inherent brittleness poses challenges in maintaining durability. This study focused on investigating the impact of numbers of washing processes from reusing on the surface quality and mechanical properties of glass bottles after each washing cycle. Contact angle technique was used to determine surface quality of glass bottles. It was found that mechanical integrity, as reflected in internal pressure resistance values, and surface quality of glass bottles exhibited an exponential decline with each washing cycle. Furthermore, a predictive model (R2 = 0.8882) was developed to estimate its …

Go to article

Effect Of Niobium Dopant On Zno Thin Films Prepared Via The Sol–Gel Spin Coating Method, Kevin Alvin Eswar, Nur Fairuz Rostan, Maryam Mohamad, Rabiatuladawiyah Md Akhir, Rosfayanti Rasmidi, Muliyadi Guliling, Najwa Ezira Azhar, Irmaizatussyehdany Buniyamin, Mohd Firdaus Malek, Mohamad Rusop Mahmood, Husairi Fadzilah Suhaimi, Saifollah Abdullah Mar 2025

Effect Of Niobium Dopant On Zno Thin Films Prepared Via The Sol–Gel Spin Coating Method, Kevin Alvin Eswar, Nur Fairuz Rostan, Maryam Mohamad, Rabiatuladawiyah Md Akhir, Rosfayanti Rasmidi, Muliyadi Guliling, Najwa Ezira Azhar, Irmaizatussyehdany Buniyamin, Mohd Firdaus Malek, Mohamad Rusop Mahmood, Husairi Fadzilah Suhaimi, Saifollah Abdullah

Makara Journal of Science

Thin films of zinc oxide (ZnO) and niobium (Nb)-doped ZnO were deposited on a glass substrate using the sol–gel spin coating method. Diethanolamine, isopropyl alcohol, and zinc acetate served as the stabilizers, solvent, and starting ma-terial, respectively. Niobium pentachloride was employed as the dopant source. Energy-dispersive X-ray analysis con-firmed Nb incorporation. Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and ultravio-let–visible spectroscopy (UV–Vis) analyses characterized the morphology, structure, and optics of the films, respective-ly. Both films, comprising nanoparticles, were visible in FESEM. Nb doping reduced the particle size from 44.2 nm to 35.8 nm. The XRD peaks at 31.23°, …

Go to article

Novel Approach For The Micro Cracks Detection Of Solar Wafers And Cells, Mohd Israil, Arvind Kumar Sharma, Ekta Gupta Jan 2025

Novel Approach For The Micro Cracks Detection Of Solar Wafers And Cells, Mohd Israil, Arvind Kumar Sharma, Ekta Gupta

Al-Bahir

This paper deals with the review of various existing technique for the microcracks detection in silicon solar cell and wafer. In addition to this, we proposed a novel approach for the machine learning technique for the inspection of the cracks those are existed in the solar cell and wafer and not able to detect by the naked eyes. There are many techniques have been developed by the various researchers around the world to inspect solar cells for defect. All the techniques discussed in this article having some features and some weakness too. This paper present here gives the two-fold solution …

Go to article

Sustainable Clay Brick Manufacturing: A Review Of Mechanical Properties, Firing Technologies, Emissions, And Control Strategies, I. S. Eldeeb, Ayman Bakry, Ahmed M. Nasr, E. A. Showaib Jan 2025

Sustainable Clay Brick Manufacturing: A Review Of Mechanical Properties, Firing Technologies, Emissions, And Control Strategies, I. S. Eldeeb, Ayman Bakry, Ahmed M. Nasr, E. A. Showaib

Journal of Engineering Research

The clay brick industry, a cornerstone of global construction, faces increasing pressure to mitigate its substantial environmental footprint and improve the sustainability of its practices. The energy-intensive firing process, often reliant on coal combustion, generates significant atmospheric emissions, contributing to climate change and local air pollution. Furthermore, achieving desired mechanical properties in the final product is essential for ensuring the structural integrity and longevity of buildings. This review provides a comprehensive analysis of the chemical and thermodynamic processes governing clay brick firing, exploring their influence on both emissions and the final product's mechanical strength, durability, and water absorption. We examine …

Go to article

Effect Of Build Orientation On Tensile Properties And Fractography Of Additive Manufactured Inconel 718 Alloy, Ajay Kumar Maurya, Amit Kumar, Swarnambuj Suman Jan 2025

Effect Of Build Orientation On Tensile Properties And Fractography Of Additive Manufactured Inconel 718 Alloy, Ajay Kumar Maurya, Amit Kumar, Swarnambuj Suman

ASEAN Journal on Science and Technology for Development

The additive manufacturing (AM) technique “Direct Metal Laser Sintering (DMLS)” is used to create 3D objects directly from 3D design data. A lightweight and complexity-free part without any expensive tooling can be fabricated easily using this method, but it is still challenging to achieve the desired mechanical strength from AM parts, as the mechanical properties of AM-produced parts vary with orientation, scan strategy, and process parameters. Inconel 718 alloy is most commonly utilized in the aerospace and automotive industries, because of its high resistance to corrosion and excellent mechanical qualities. This work presents a study to investigate the orientation-based mechanical …

Go to article

Wood-Plastic Composites Integration For Triboelectric Nanogenerator Electricity Generation, Hanbyeol Park, Razamala Yashna F. Dimaporo, Sophia Maureen A. Emperado, Anton Jefferson L. Pangilinan, Juan Carlo T. Gumangan Dec 2024

Wood-Plastic Composites Integration For Triboelectric Nanogenerator Electricity Generation, Hanbyeol Park, Razamala Yashna F. Dimaporo, Sophia Maureen A. Emperado, Anton Jefferson L. Pangilinan, Juan Carlo T. Gumangan

Sinaya: A Philippine Journal for Senior High School Teachers and Students

Access to electricity in underdeveloped communities is particularly crucial in improving the living standards of people and alleviating poverty by promoting sustainable development. This study deals with the exploration of incorporating wood-plastic composite (WPC) – specifically wood pulp (W) and high-density polyethylene (H) – into triboelectric nanogenerator (TENG) flooring system to convert mechanical energy to electrical energy, promoting sustainable energy, reducing greenhouse gas emissions, improving the quality of life, and serving as feasible flooring tiles. Two types of TENG tiles were prepared by using different WPC ratios: 30W:70H and 70W:30H. A static bending test was conducted to assess the flexural …

Go to article

Mapping Of The Potential To Substitute Plastic In Food Packaging In Finnish Supermarkets, Taina Lahtinen, Kirsi Kataja, Jari Viitanen, Vinay Kumar, Jussi Lahtinen, Ali Harlin Sep 2024

Mapping Of The Potential To Substitute Plastic In Food Packaging In Finnish Supermarkets, Taina Lahtinen, Kirsi Kataja, Jari Viitanen, Vinay Kumar, Jussi Lahtinen, Ali Harlin

Journal of Applied Packaging Research

Single-use plastics (SUP), which are extensively utilized in food packaging, are one notable cause for the constantly growing littering issue. This novel study is one of the first attempts to systemically analyze food packaging data to reveal the potential for plastic packaging material reduction or substitution by utilizing a primary packaging material summary of single items sold in Finnish supermarkets. The outcome of the study indicates considerable dissimilarities among product groups concerning used packaging materials, weight, share of plastic, and sales volume. The analysis identified sweets and ready-to-eat meals as product groups for which there is a clear need, but …

Go to article

Implementation Of Machine Learning Using Deep Neural Networks To Estimate The Failure Risk Caused By Leakage In Pressure Relief Devices, Adi Yudho Wijayanto, Yossi Andreano, M. Ali Yafi Rizky, Dedi Priadi Aug 2024

Implementation Of Machine Learning Using Deep Neural Networks To Estimate The Failure Risk Caused By Leakage In Pressure Relief Devices, Adi Yudho Wijayanto, Yossi Andreano, M. Ali Yafi Rizky, Dedi Priadi

Journal of Materials Exploration and Findings

The primary objective of deploying Pressure Relief Device (PRD) equipment is to ensure the safety of pressure vessels within a pressurized system. Over time, PRD equipment may degrade and fail to perform its intended function, which must be identified as a failure mode. To mitigate potential risks associated with this, it is recommended that an approach such as risk-based inspection (RBI) be implemented. Despite the widespread adoption of RBI, the method relies on qualitative techniques, leading to significant variations in equipment risk assessments. This study proposes a novel risk analysis method that uses deep learning-based machine learning to develop a …

Go to article

Effect Of Impurities In Supercritical Co2 Environment On Steel Corrosion Behavior – An Overview, Shilla Rizqi Widianto, Johny Wahyuadi Soedarsono, Rini Riastuti, Badrul Munir Aug 2024

Effect Of Impurities In Supercritical Co2 Environment On Steel Corrosion Behavior – An Overview, Shilla Rizqi Widianto, Johny Wahyuadi Soedarsono, Rini Riastuti, Badrul Munir

Journal of Materials Exploration and Findings

Carbon capture, utilization, and storage (CCUS) technology is one of the available technologies to reduce presence of greenhouse gasses. Implementation of CCUS technology strongly relates with the CO2 transportation from the capturing facility to the storage in the geological reservoir. The most economical method for large-scale and long-distance CO2 transportation is using pipeline in supercritical phase. Moreover, presence of impurities such as water, O2, SO2, H2S, NO2 may cause detrimental effect towards carbon steel pipeline. This paper intends to provide an initial information for supercritical CO2 pipeline material selection, which …

Go to article

Hollow Connecting Rod Thin Wall Austempered Ductile Iron (Twadi) For Manufacturing Light Weight Components, Ricardina Freitas Da Silva, Bambang Suharno, Rianti Dewi Sulamet-Ariobimo Aug 2024

Hollow Connecting Rod Thin Wall Austempered Ductile Iron (Twadi) For Manufacturing Light Weight Components, Ricardina Freitas Da Silva, Bambang Suharno, Rianti Dewi Sulamet-Ariobimo

Journal of Materials Exploration and Findings

Efforts made by the automotive industry to reduce energy consumption have encouraged researchers to carry out various studies. One way is to make components lighter by casting thin wall austempered ductile iron (TWADI). Reducing the weight of components such as connecting rods (conrod) will result in lower energy consumption, but provided that these components still meet standards in terms of mechanical properties and microstructure or even exceed them. In this research, design optimization was applied to conrod by making the area I-beam zero mm (hollow), with hope that it can replace conrod Vespa PX-150. While the manufacturing process is divided …

Go to article

Analysis Risk Based Inspection Api 581 On Lpg Spherical Tank At Pt. Xyz, Sigit Trahmawan, Eddy Sumarno Siradj, Jaka Fajar Fatriansyah Aug 2024

Analysis Risk Based Inspection Api 581 On Lpg Spherical Tank At Pt. Xyz, Sigit Trahmawan, Eddy Sumarno Siradj, Jaka Fajar Fatriansyah

Journal of Materials Exploration and Findings

Liquified petroleum gas (LPG) spherical tanks are pressure vessel equipment for storing fuel gas products. The high pressure along with the fuel gas inside as flammable and combustible substance means that this equipment might result major accident hazard such as explosion, fires and environmental pollution. This study is aimed calculated and mitigate risk on 500 metric ton capacity LPG spherical tank using Risk-based inspection (RBI) analysis method that makes risk as its foundation. This RBI method uses quantitative analysis referring to API 581 to determine the risk of LPG Spherical Tank by determining the probability of failure (PoF) and the …

Go to article

Root Cause Analysis Of Leakage Tube Boiler: A Study Case, Lydia Kartika Basaria Sitompul, Dedi Priadi Aug 2024

Root Cause Analysis Of Leakage Tube Boiler: A Study Case, Lydia Kartika Basaria Sitompul, Dedi Priadi

Journal of Materials Exploration and Findings

Oil and gas industry can have catastrophic implications for human life, the environment, and the economy. This paper investigated failure analysis using root cause analysis especially for boiler tube leakage of Heat Exchanger. Identify the issue using microscopic examination and energy dispersive x-ray analysis were conducted on the tube inside and outside surface to determine root cause of the failure. The formation of a protective film in the aluminum-brass tube during the starting stage is very important for ensuring adequate film protection throughout the service life of the heat exchanger. During this stage, exposure to unpolluted water is essential. The …

Go to article

Preparation Of Β-Ni (Oh)2 Nanosheet–Modified Glassy Carbon For Pseudocapacitors, Muhammad Buchari Setia Putra, Aliyah Aliyah, Afiten Rahmin Sanjaya, Respati Kevin Pramadewandaru, Hoeil Chung, Tribidasari Anggraningrum Ivandini Jun 2024

Preparation Of Β-Ni (Oh)2 Nanosheet–Modified Glassy Carbon For Pseudocapacitors, Muhammad Buchari Setia Putra, Aliyah Aliyah, Afiten Rahmin Sanjaya, Respati Kevin Pramadewandaru, Hoeil Chung, Tribidasari Anggraningrum Ivandini

Makara Journal of Science

β-Nickel hydroxide (Ni(OH)2) nanosheet–modified glassy carbon for pseudocapacitors was successfully prepared. The nanosheets were synthesized via a conventional growth seeding method combined with hydrothermal treatment. Transmission electron microscopy (TEM) characterization indicated the hexagonal structure of the nanosheets of around 15 nm in size, and X-ray diffraction (XRD) pattern confirmed the β-phase lattice crystal. These nanosheets used to modify the glassy carbon surface, increased the electroactive surface area by around 15 times. Furthermore, electrochemical investigation of the modified glassy carbon revealed an excellent performance and a specific capacitance of 628.01 F g−1 at a 1 A g−1 …

Go to article

Surface Treatments' Effects On The Capacitor's Dielectric Performance Under Electro-Thermal Stresses, Haider. M. Umran, Feipeng Wang Apr 2024

Surface Treatments' Effects On The Capacitor's Dielectric Performance Under Electro-Thermal Stresses, Haider. M. Umran, Feipeng Wang

Karbala International Journal of Modern Science

Biaxial-oriented polypropylene (BOPP) films are characterized by unfavorable aging behavior because of their poor susceptibility to high temperatures, humidity, and high electric fields. This makes them unqualified to withstand harsh operating conditions, such as in capacitor applications. This study investigates the impact of annealing BOPP samples at 100 °C for five hours after fluorination at different times (15, 30, and 60 minutes) on their electrical and mechanical performance under electro-thermal stresses. Scanning electron microscope (SEM) images confirm that there is an increase in surface roughness and the formation of a dense layer of fluorine-containing groups monotonically with fluorination time. So, …

Go to article

Next Last