Other Materials Science and Engineering Commons^™

Flexible Microelectrode-Based Impedance Immunosensor For Rapid Detection Of E. Coli O157:H7, Sonatan Kumar Biswas

Graduate Theses and Dissertations

Abstract Food contamination poses a significant threat to public health, the economy, and human health worldwide, occurring at any stage of the food supply chain, from farm to fork. Escherichia coli 0157:H7, recognized as one of the principal causes of foodborne illness, poses a considerable risk to food safety. The primary objective of this investigation is to devise a flexible microelectrode-based immunosensor capable of swiftly identifying E. coli O157:H7 cells without the need for incubation in a pure culture environment. In the development of the biosensor, the gold electrode (composed of 50% Au) underwent an initial coating process involving 2-aminoethanethiol/cysteamine, …

Thermal Characterization Of 3d Printing Materials For Increasing Insulation Potential And Practicality, Jackson H. Minnick

Mechanical Engineering Undergraduate Honors Theses

This study served as an exploration into the possible existence of a correlation between the infill lattice structure of a 3D printed wall section and the thermal performance of that sample as characterized by thermal conductivity measured in units of Watts per meter Kelvin. With the continual increase in the practicality, fidelity, and applicable fields of additive manufacturing, namely FDM 3D printing, research on specific print characteristics and their effects on the material and thermal characteristics of the part in question is steadily becoming more commonplace. Although the thermal conductivity of 3D printed wall sections as a function of infill …

The Epitaxial Growth Of Ge And Gesn Semiconductor Thin Films On C-Plane Sapphire, Emmanuel Wangila, Calbi Gunder, Petro M. Lytvyn, Mohammad Zamani-Alavijeh, Fernando Maia De Oliveira, Serhii Kryvyi, Hryhorii Stanchu, Aida Sheibani, Yuriy I. Mazur, Shui-Qing Yu, Gregory J. Salamo

Physics Faculty Publications and Presentations

Ge_1−xSn_x growth on a new sapphire platform has been demonstrated. This involved the growth of GeSn on Ge/GaAs layers using the algorithm developed. The resultant growths of Ge on GaAs/AlAs/sapphire and Ge_1−xSn_x on Ge/GaAs/AlAs/sapphire were investigated by in situ and ex situ characterization techniques to ascertain the surface morphology, crystal structure, and quality. The growth mode of Ge on GaAs was predominantly two-dimensional (2D), which signifies a layer-by-layer deposition, contributing to enhanced crystal quality in the Ge/GaAs system. The growth of Ge_1−xSn_x with 10% Sn on a graded profile for 30 …

Enhancing Stability Of High-Nickel Cathodes For Lithium-Ion Batteries Through Additive Manufacturing Of Cathode Structure, Matthew Sullivan

Mechanical Engineering Undergraduate Honors Theses

Lithium-ion batteries (LIBs) are currently the best method to store electrical energy for use in portable electronics and electronic vehicles. New cathode materials for LIBs are consistently studied and researched, but few are as promising and attainable as nickel-rich transition metal oxides such as LiNi1-x-yMnxCoyO2 (NMC). NMC materials exist with many different mass ratios, but higher nickel content materials provide higher energy density. With this increase in capacity comes a sacrifice with cyclability, as high-nickel NMC variants are prone to structure collapse, transition metal dissolution, and cracks due to volume change. In this report, mechanical modification of the electrode by …

Exploring The Variability In The Gray Scale Imaging Process Of Asphalt Samples, David Oluwawade Olatunji

Civil Engineering Undergraduate Honors Theses

Gray scale image analysis is a powerful tool for testing asphalt concrete materials. From material composition to surface properties, gray scale analysis has shown evidence as a non-invasive way to obtain information from asphalt samples. Casillas et al. used a gray scale analysis to measure the Representative Volume Element of three asphalt sample geometries to understand the minimum size at which an asphalt sample is representative of a larger homogeneous mixture [1]. While the gray scale analysis used in this experiment yielded results, there were unknown factors in the image capturing process. Particularly, not much was known about the effect …

Structure And Deformation Of Carbyne Deposited On A Nickel Substrate, Abigail Eaton

Mechanical Engineering Undergraduate Honors Theses

Carbyne is a nanomaterial of great interest due to its ability to withstand high forces similarly to other carbon allotropes such as graphene or carbon nanotubes. However, it is currently difficult to synthesize and maintain without the assistance of a composite material substrate that the carbyne can be integrated with, which will affect its reaction to varying conditions. This thesis focuses on studying the effects of carbyne on a nickel surface and its mechanical properties to predict its future usages and potential for applications in varying fields. We perform a three-point bending test simulation using molecular dynamics with pure Ni …

Sub-/Surface Evaluation Of Industry-Grade Endodontic File Micro-/Nanoscale Structures And Low-Cost, Low-Energy Methods Of Rapidly Annealing And Nitriding Titanium, Nicholas Broadbent

Mechanical Engineering Undergraduate Honors Theses

Because of their unique mechanical properties, shape memory capabilities and biocompatibility, Nickel-titanium alloys are frequently used in the medical industry for a variety of applications including endodontic files. Until now, the performance of industry-standard endodontic files has been characterized by this alloying property and a limited set of macroscale surface structures and features. In this work, High Resolution Transmission Electron Microscopy (HRTEM), Low Resolution Transmission Electron Microscopy (LRTEM), Scanning Electron Microscopy (SEM), and Energy Dispersive X-Ray Spectroscopy (EDX) analyses are conducted at both the surface and sub-surface levels of a wide selection of industry-grade endodontic files currently offered on the …

Enhancement Of Phase Change Material Sorbitol By Nanoparticle Inclusion For Improving Thermal Energy Storage Capabilities, Joshua Kasitz

Mechanical Engineering Undergraduate Honors Theses

Thermal management of electronic devices has become an increasingly vital field of study with the rapid miniaturization of many key electrical components. With the significant improvement of semiconductor manufacturing and intensified focus on interconnects, electronic devices have decreased in size at an incredible rate. Decreasing spatial requirements is essential to improving device capabilities as the electronic system is able to incorporate more components. Currently, electronic systems are drastically limited by the capabilities of their cooling mechanisms. Smaller devices lead to large increases in the energy density of the system and require more powerful cooling systems to maintain proper component operating …

Methods To Remotely Eliminate Biofilm From Medical Implants Using 2.4 Ghz Microwaves, Brett Glenn

Mechanical Engineering Undergraduate Honors Theses

Infections associated with biofilm growth are usually challenging to eradicate due to their high tolerance toward antibiotics [11, 12]. Biofilms often form on the inert surfaces of medically implanted devices [13]. No matter the sophistication, microbial infections can develop on all medical devices and tissue engineering constructs [12]. Related infections lead to 2 million cases annually in the U.S., costing the healthcare system over $5 billion in additional healthcare expenses [12].

Novel solutions to biofilm’s microbial colonization span the spectrum of engineering and science disciplines. Yet a practical solution still does not exist. The research presented here will explore a …

Modelling Palladium Decorated Graphene Using Density Functional Theory To Analyze Hydrogen Sensing Application, Sameer Kulkarni

Mechanical Engineering Undergraduate Honors Theses

Graphene is an exciting new material with many promising applications. One such application of graphene is gas sensing, when adsorbed with transition metals, notably Palladium. Therefore, it is of paramount importance to have appropriate ab initio calculations to calculate the various properties of graphene under different adsorbates and gasses. The first step in these calculations is to have a functioning base Density Functional Theory (DFT) model of pristine graphene decorated with Palladium. The computational methods described in this paper has yielded results for pristine graphene that have been confirmed many times in previous experimental and theoretical studies. Future work needs …

Optimization Of The Practice Of Slow Cooling Steel Bars: A Redesign And Modernization Of Materials, Eryn Johnston

Mechanical Engineering Undergraduate Honors Theses

Throughout the process of steel making, certain grades of steel are a higher risk for defects caused by the inability to quickly diffuse hydrogen through the steel when cooled to room temperature at a normal rate based on the ambient air temperature. To reduce the hydrogen flaking defects that are caused due to hydrogen entrapment in the steel, the process of slow cooling is utilized. This process reduces the cooling rate of steel bars by keeping them at a higher temperature for extended periods and in turn gives the hydrogen a chance to fully dissipate from the steel. In many …

Surface Area And Electrocatalytic Properties Of Feni Nanoparticles For The Oxygen Evolution Reaction (Oer), James Burrow

Chemical Engineering Undergraduate Honors Theses

Iron-nickel bimetallic electrocatalysts have recently emerged as some of the best candidates for the oxygen evolution reaction (OER) in alkaline electrolyte. Understanding the effects of composition and morphology of iron-nickel nanoparticles is crucial for optimization and enhanced electrocatalyst performance. Both physical surface area and electrochemical surface area (ECSA) are functions of morphology. In this study, four different iron-nickel nanoparticle catalysts were synthesized. The catalysts were varied based on morphology (alloy versus core-shell) and composition (low, medium, and high stabilizer concentration). Brunauer-Emmett-Teller (BET) surface area analysis was conducted on three of the synthesized iron-nickel nanoparticles using a physisorption analyzer while electrochemical …

Atomistic Simulations Of Defect Nucleation And Intralayer Fracture In Molybdenum Disulphide During Nanoindentation, James A. Stewart

Graduate Theses and Dissertations

Molybdenum disulphide (MoS2) is a layered, hexagonal crystal that has a very low coefficient of friction. Due to this low coefficient of friction, MoS2 has become a well-known solid lubricant and liquid lubricant additive. As such, nanoparticles of MoS2 have been proposed as an additive to traditional liquid lubricants to provide frictional properties that are sensitive to different temperature and pressure regimes. However, to properly design these MoS2 nanoparticles to be sensitive to different temperature and pressure regimes, it is necessary to understand the mechanical response of crystalline MoS2 under mechanical loading. Specifically, the fundamental mechanism associated with the nucleation …

Measurement Of The Coefficient Of Thermal Expansion Of Superconducting Thin Films Using Powder X-Ray Diffraction, Biju Chandran, R. Calvin Goforth, S. Nasrazadani

Journal of the Arkansas Academy of Science

The High Density Electronics Center (HiDEC) at the University of Arkansas, Fayetteville is developing the technology for High Temperature Superconductor Multi-Chip Modules (HTSC-MCM's). As part of this work, we are looking at the mechanical properties of HTSC materials. An important mechanical property which influences the mechanical integrity of the hybrid MCMis the coefficient of thermal expansion (CTE) of the HTSC films. As a first step in developing a procedure for the determination of the CTE of HTSC materials, the lattice parameters and the CTE of an alpha-alumina substrate have been determined by powder x-ray diffraction technique. An extension of this …