Other Materials Science and Engineering Commons^™

Synthesis And Characterization Of Carbon Quantum Dots And Gold Nanoparticles For Norovirus Biosensing Applications In Water Systems, Breanne Evans

Master's Theses

Rapid, reliable detection of viral pathogens remains a significant challenge across water-treatment and environmental monitoring systems, including drinking-water, wastewater, water reuse, and environmental surveillance applications. Waterborne viral contamination can pose substantial public-health risks, making early detection essential for protecting water quality and responding quickly to treatment failures or contamination events. Direct potable reuse (DPR) is one particularly demanding example because it requires continuous verification of treatment performance and the broader need for rapid virus monitoring extends across many water-treatment and environmental surveillance applications. Norovirus is a priority target because of its widespread occurrence in wastewater, environmental persistence, and exceptionally low …

The Role Of Zinc Precursor Concentration In Modulating The Structural, Optical, And Electrical Properties Of Sol-Gel Derived Czts Thin Films, Justine John Tibaijuka

Tanzania Journal of Science

This study reports on CZTS thin films fabricated by sol–gel spin coating using zinc acetate dihydrate, copper acetate dihydrate, tin chloride, and thiourea dissolved in methanol with monoethylamine as a stabilizer. The films were annealed rapidly at 540 °C by using an RTP furnace. Results show the significant influence of zinc concentration on films’ properties with band gap evolution between 1.46 and 1.7 eV, along with high absorption coefficients exceeding 10⁴ cm⁻¹ in the visible range. Structurally, the films evolved from poorly crystalline at low Zn content to well- crystallized, (112)-oriented kesterite near stoichiometry. However, excessive Zn caused slight degradation …

Lafe0.925ti0.075o3 Perovskite Coated With Ethyl Cellulose: A High-Stability, Low-Hysteresis Platform For Advanced Humidity Sensing, Akhmad Futukhillah Fataba Alaih, Djoko Triyono, Rifqi Almusawi Rafsanjani

Makara Journal of Science

Humidity sensors are pivotal in numerous sectors, such as environmental monitoring, industrial automation, and health-care. This study presents the fabrication and detailed evaluation of an advanced humidity sensor using ethyl cellulose (EC)-coated LaFe_0.925Ti_0.075O₃ (LFTO) perovskite nanoparticles synthesized via the sol-gel method. The LFTO nanopar-ticles exhibited a mesoporous structure with an enhanced surface area, which significantly improved their moisture adsorption capabilities. The innovative application of EC coating addresses critical substrate adhesion issues, enhancing mechanical stability without compromising sensor sensitivity. Comprehensive performance evaluations revealed minimal hysteresis (

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO₂ emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

Shrinkage Study In Photopolymerisable Hybrid Sol-Gel Through Holographic Patterning, Jamshed Aftab, Izabela Naydenova, Tatsiana Mikulchyk

Articles

Photopolymerisation induced shrinkage of holographic materials is one of the main factors which needs to be considered for designing holographic optical elements (HOEs) with high accuracy in light redirection with maximum efficiency. This work studies the shrinkage in photopolymerisable hybrid sol-gel (PHSG) by examining the properties of volume transmission gratings recorded in PHSG layers. It explores both the dependence of shrinkage on the holographic grating parameters (thickness, spatial frequency, slant angle) and the effect of material aging. By using the fringe-plane rotation model, shrinkage is found to have the maximum value of 1.37 % at 765 lines/mm (19.36° slant angle) …

Low-Field Magnetoresistance In Nanocomposites Of La₀.₇Sr₀.₃Mno₃ And Metal Oxides, Nicholas K. Thiel-Hudson

University Scholar Projects

Pure La_0.7Sr_0.3MnO₃ (LSMO) exhibits colossal magnetoresistance (CMR) with large applied magnetic field over a narrow temperature range (intrinsic behavior), limiting its application to narrow temperature ranges. In contrast, the extrinsic CMR effect originates from inhomogeneities at larger length scales, such as grain boundaries and phase separation, where the structural features act as tunneling barriers, leading to a low-field magnetoresistance (LFMR) response, thereby expanding the application of LSMO into the low-field regime over a broader temperature range. In this work, the magnetotransport behavior of pure LSMO thin film is compared to the composite layered heterostructures of …

Effect Of Niobium Dopant On Zno Thin Films Prepared Via The Sol–Gel Spin Coating Method, Kevin Alvin Eswar, Nur Fairuz Rostan, Maryam Mohamad, Rabiatuladawiyah Md Akhir, Rosfayanti Rasmidi, Muliyadi Guliling, Najwa Ezira Azhar, Irmaizatussyehdany Buniyamin, Mohd Firdaus Malek, Mohamad Rusop Mahmood, Husairi Fadzilah Suhaimi, Saifollah Abdullah

Makara Journal of Science

Thin films of zinc oxide (ZnO) and niobium (Nb)-doped ZnO were deposited on a glass substrate using the sol–gel spin coating method. Diethanolamine, isopropyl alcohol, and zinc acetate served as the stabilizers, solvent, and starting ma-terial, respectively. Niobium pentachloride was employed as the dopant source. Energy-dispersive X-ray analysis con-firmed Nb incorporation. Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and ultravio-let–visible spectroscopy (UV–Vis) analyses characterized the morphology, structure, and optics of the films, respective-ly. Both films, comprising nanoparticles, were visible in FESEM. Nb doping reduced the particle size from 44.2 nm to 35.8 nm. The XRD peaks at 31.23°, …

Novel Approach For The Micro Cracks Detection Of Solar Wafers And Cells, Mohd Israil, Arvind Kumar Sharma, Ekta Gupta

Al-Bahir

This paper deals with the review of various existing technique for the microcracks detection in silicon solar cell and wafer. In addition to this, we proposed a novel approach for the machine learning technique for the inspection of the cracks those are existed in the solar cell and wafer and not able to detect by the naked eyes. There are many techniques have been developed by the various researchers around the world to inspect solar cells for defect. All the techniques discussed in this article having some features and some weakness too. This paper present here gives the two-fold solution …

Frustrated Quantum Magnetism: The Interplay Of Isotropic And Anisotropic Interactions With Application To Α-Rucl3, Evan M. Wilson

UNF Graduate Theses and Dissertations

We investigate how anisotropic spin interactions, including Dzyaloshinskii–Moriya and Kitaev terms, manifest across quantum spin systems ranging from a single S = 1/2 dimer to molecular spin clusters and layered magnetic materials. Beginning with an exact analysis of the spin dimer, we demonstrate how singlet–triplet mixing induced by Dzyaloshinskii–Moriya interaction directly influences both thermodynamic observables and inelastic neutron scattering spectra. These microscopic fingerprints are then extended to trimer, tetramer, and tetrahedron geometries, where field-induced phase transitions and heat capacity anomalies reveal the interplay between isotropic Heisenberg and anisotropic Kitaev exchanges. In the frustrated zigzag honeycomb lattice, we show that a …

Characterization And Optimization Of Sand And Tung Oil-Based Resins For Binder-Jet 3d Printing, Daniel I. Ajiola

College of Graduate Studies: Theses & Dissertations

Binder-jet 3D printing as a transformative technology in additive manufacturing, offers the ability to fabricate complex structures with diverse materials. This thesis investigates the use of a sustainable tung oil-based resin to create composites, exploring the potential for an eco-friendly alternative to synthetic binders.

The aim of this research is to develop and characterize a bio-based resin formulation, using tung oil as the primary binder, for application in binder-jet 3D printing with sand as the reinforcement. The resin formulation was prepared by combining tung oil, n-butyl methacrylate, divinylbenzene, and di-tert-butyl peroxide in precise proportions, ensuring a balanced mixture that supports …

Spin And Charge Transport In Metallic Ferrimagnets And Disordered Magnetic Oxides, Leopoldo A. Hernandez

Electronic Theses and Dissertations

Recent efforts have been exploring the use of thin film synthetic ferrimagnets and disordered magnetic oxides for applications in spintronic devices. Due to the antiferromagnetic exchange interaction, ferrimagnetic materials offer the ultrafast dynamics of the antiferromagnetic exchange, with a net magnetization that can be influenced externally. With two, or more, competing ferromagnet sublattices, interesting properties arise that depend on the final magnetic landscape after growth of the material and it’s inherent magnetic anisotropy energies. Properties such as magnetic compensation temperatures, and perpendicular magnetic anisotropy are attractive for applications in spintronic memory and logic devices, some already being implemented in MRAM …

Surface Treatments' Effects On The Capacitor's Dielectric Performance Under Electro-Thermal Stresses, Haider. M. Umran, Feipeng Wang

Karbala International Journal of Modern Science

Biaxial-oriented polypropylene (BOPP) films are characterized by unfavorable aging behavior because of their poor susceptibility to high temperatures, humidity, and high electric fields. This makes them unqualified to withstand harsh operating conditions, such as in capacitor applications. This study investigates the impact of annealing BOPP samples at 100 °C for five hours after fluorination at different times (15, 30, and 60 minutes) on their electrical and mechanical performance under electro-thermal stresses. Scanning electron microscope (SEM) images confirm that there is an increase in surface roughness and the formation of a dense layer of fluorine-containing groups monotonically with fluorination time. So, …

The Interplay Of Spin, Charge, And Heat: From Metal/Insulator Heterostructures To Perovskite Bilayers, Sam M. Bleser

Electronic Theses and Dissertations

In this dissertation begin with an investigation of non-local spin transport in an amorphous germanium (a-Ge) sample via the inverse spin Hall effect (ISHE). In that study we show that commonly used techniques such as differential conductance and delta mode of a paired Keithley 6221/2182a for non-local resistance measurements can lead to false indicators of spin transport. Next, we turn out attention to a thickness dependent study in thermally-evaporated chromium (Cr) thin films on a bulk polycrystalline yttrium-iron-garnet (YIG) substrate. This project analyzed the spin transport in the Cr films versus thickness via the longitudinal spin Seebeck effect (LSSE). This …

Processing, Stability, And High-Temperature Properties Of Doped Lacro3-Based Refractory Ceramics And Composites For Harsh Environments Sensing Applications, Javier A. Mena

Graduate Theses, Dissertations, and Problem Reports (ETD)

In order to test and monitor the operational stability and conditions of various energy, transportation, and manufacturing systems and their components, accurate sensors capable of operating at temperatures over 1000 °C in various environments for long durations are required. In addition, many of these harsh environmental systems do not permit sensors to be directly inserted into the environment, so the sensors need to be embedded into the surrounding support or thermal protective materials. Some technological and industrial applications that require the use of harsh environment conditions sensing include nuclear and chemical reactors, jet engines, heavyduty gas turbines, rotating bearings in …

Design And Characterization Of A Novel Eef2k Degrader With Potent Therapeutic Efficacy Against Triple-Negative Breast Cancer, Changxin Zhong, Rongfeng Zhu, Ting Jiang, Sheng Tian, Xiaobao Zhao, Xiaoya Wan, Shilong Jiang, Zonglin Chen, Rong Gong, Linhao He, Jin-Ming Yang, Na Ye, Yan Cheng

Markey Cancer Center Faculty Publications

Dysregulated eEF2K expression is implicated in the pathogenesis of many human cancers, including triple-negative breast cancer (TNBC), making it a plausible therapeutic target. However, specific eEF2K inhibitors with potent anti-cancer activity have not been available so far. Targeted protein degradation has emerged as a new strategy for drug discovery. In this study, a novel small molecule chemical is designed and synthesized, named as compound C1, which shows potent activity in degrading eEF2K. C1 selectively binds to F8, L10, R144, C146, E229, and Y236 of the eEF2K protein and promotes its proteasomal degradation by increasing the interaction between eEF2K and the …

Optimizing Mn-Al Permanent Magnet Performance Through Control Of The Phase Transformation, Ternary Element Addition, And Advanced Processing, Thomas R. Keller

Dartmouth College Ph.D Dissertations

The growing need for electrical power in machines and vehicles brings with it a growing need for critical materials. The current high-performance permanent magnets (PMs) based on rare-earth (RE) elements Nd and Sm cannot escape the problem of raw material cost, geographic scarcity in the earth’s crust, and lack of circular global supply chains. This poses a problem of industrial ecology: can PMs be made from inexpensive, more abundant materials while still meeting sufficient performance criteria? PMs based on the magnetic τ phase of Mn-Al offer a possible alternative to REPMs. However, years of innovation have not yet achieved real-world …

Effective Nanomembranes From Chitosan/Pva Blend Decorated Graphene Oxide With Gum Rosin And Silver Nanoparticles For Removal Of Heavy Metals And Microbes From Water Resources, Mohamed Morsy

Nanotechnology Research Centre

No abstract provided.

Femtotesla Magnetometry And Nanoscale Imaging With Color Centers In Diamond, Yaser Silani

Optical Science and Engineering ETDs

Intriguing photophysical properties of color centers in diamond make them ideal candidates for many applications from imaging and sensing to quantum networking. In the first part of this work, we have studied the silicon vacancy (SiV) centers in diamond for nanoscale imaging applications. We showed that these centers are promising fluorophores for Stimulated Emission Depletion (STED) microscopy, owing to their photostable, near-infrared emission and favorable photophysical properties. In the second part, we built a femtotesla Radio-Frequency (RF) magnetometer based on the diamond nitrogen vacancy (NV) centers and magnetic flux concentrators. We used this sensor to remotely detect Nuclear Quadrupole Resonance …

Mechanical And Morphological Characterization Of Energy Materials By Nanoindentation And Scanning Probe Microscopy, Jacob Hempel

Theses and Dissertations--Physics and Astronomy

The demand for robust materials in energy-based applications such as solid electrolytes for batteries, piezoelectric composites for mechanical energy harvesting, or new polymer materials for polymer binders in composite electrodes is on the rise. Mechanical degradation is the most common way for devices to fail in operation, thus a thorough understanding of a material’s mechanical properties is essential for application purposes.

In this dissertation, the mechanical characterization of novel boron cluster solid electrolytes is presented. Therein, we determine the elastic modulus and hardness of these compounds using instrumented indentation. A comparison is made against other solid electrolytes. It is found …

Development Of Interatomic Potential Of High Entropy Diborides With Artificial Intelligence Approach To Simulate The Thermo-Mechanical Properties, Nur Aziz Octoviawan

Graduate Theses/Dissertations

The interatomic potentials designed for binary/high entropy diborides and ultra-high temperature composites (UHTC) have been developed through the implementation of deep neural network (DNN) algorithms. These algorithms employed two different approaches and corresponding codes; 1) strictly local & invariant scalar-based descriptors as implemented in the DEEPMD code and 2) equivariant tensor-based descriptors as included in the ALLEGRO code. The samples for training and validation sets of the forces, energy, and virial data were obtained from the ab-initio molecular dynamics (AIMD) simulations and Density Functional Theory (DFT) calculations, including the simulation data from the ultra-high temperature region (> 2000K). The study …

Synthesis And Characterization Of Cage-Structured Compounds As Promising Thermoelectric Materials, Nusrat Yasmin

Graduate Theses/Dissertations

The development of new thermoelectric materials is of great interest due to their potential to convert waste heat into useful electricity. The primary problem is that the physical factors that are utilized to assess thermoelectric performance conflict with one another. One way to improve their performance is to hinder the lattice from conducting heat through its vibrations while maintaining the heat conduction via the electrons. This can be done by creating cage structures that allow heavy atoms to jiggle. In this study, we report the synthesis of a group of such compounds, using the self-flux method. They all belong to …

Development Of High Kinetic Inductance Superconducting Nanowire Devices On High Permittivity Strontium Titanate Substrates, Jamie Timmons

UNF Graduate Theses and Dissertations

This thesis involves the fabrication and characterization of devices made from two different superconducting materials: yttrium barium copper oxide (YBCO), a high-TC complex oxide, and niobium nitride (NbN), a low-TC transition metal nitride. Both types of devices are fabricated on strontium titanate substrates, which provides a good lattice match to YBCO and also an extremely large permittivity at low temperature. We demonstrate that wet etching of YBCO thin films via bromine can be a viable microfrabriation technique for the material. Using approximately 35 nm thick epitaxially grown YBCO on an STO substrate, we were able to fabricate YBCO “microwires” with …

Controlled Manipulation Of Droplets On Fibers: Fundamentals And Printing Applications, Yueming Sun

All Dissertations

In this dissertation, the drop interactions with a single fiber is discussed under an application angle for the development on new Drop-on-Demand (DOD) printhead using a fiber-in-a-tube platform[1] to print highly viscous materials[2]. To control the drop formation and manipulation on fiber, one needs to know how the fiber wetting properties and the fiber diameter influence drop formation. And then, one needs to know the effects of fiber movement in the device on drop formation. These two questions constitute the main theme of this dissertation.

Before this study, it was accepted that the liquids could not form axisymmetric droplets if …

Quantum-Mechanical Evaluation Of Defects In Uranium-Bearing Materials, Megan Hoover

All Dissertations

Quantum-mechanical calculations using density functional theory with the generalized gradient approximation were employed to investigate the effects dopants have on the uranium dioxide (UO₂) structure. Uraninite is a common U⁴⁺ mineral in the Earth's crust and an important material used to produce energy and medical isotopes. Though the incorporation mechanism remains unclear, divalent cations are known to incorporate into the uranium dioxide system. Three charge-balancing mechanisms were evaluated to achieve a net neutral system, including the substitution of (1) a divalent cation for a tetravalent uranium atom and oxygen atom; (2) two divalent cations for a tetravalent …

Magnetic Field Penetration Technique To Study Field Shielding Of Multilayered Superconductors, Iresha Harshani Senevirathne, Alex Gurevich, Jean R. Delayen, A-M Valente-Feliciano

Physics Faculty Publications

The SIS structure which consists of alternative thin layers of superconductors and insulators on a bulk niobium has been proposed to shield niobium cavity surface from high magnetic field and hence increase the accelerating gradient. The study of the behavior of multilayer superconductors in an external magnetic field is essential to optimize their SRF performance. In this work we report the development of a simple and efficient technique to measure penetration of magnetic field into bulk, thin film and multilayer superconductors. Experimental setup contains a small superconducting solenoid which can produce a parallel surface magnetic field up to 0.5 T …

Modeling, Fabrication, And Characterization Of Rf-Based Passive Wireless Sensors Composed Of Refractory Semiconducting Ceramics For High Temperature Applications, Kavin Sivaneri Varadharajan Idhaiam

Graduate Theses, Dissertations, and Problem Reports (ETD)

Real-time health monitoring of high temperature systems (>500^oC) in harsh environments is necessary to prevent catastrophic events caused by structural failures, varying pressure, and chemical reactions. Conventional solid-state temperature sensors such as resistance temperature detectors (RTDs) and thermocouples are restricted by their operating environments, sensor dimensions and often require external power sources for their operation. The current work presents the research and development of RF-based passive wireless sensing technology targeting high temperatures and harsh environmental conditions. Passive wireless devices are generally classified as near-field and far-field devices based on the interrogation distance. Near-field sensors are placed at …

Voltage-Controlled Magnetic Anisotropy In Antiferromagnetic Mgo-Capped Mnpt Films, P. H. Chang, Wuzhang Fang, T. Ozaki, Kirill Belashchenko

Kirill Belashchenko Publications

The magnetic anisotropy in MgO-capped MnPt films and its voltage control are studied using first-principles calculations. Sharp variation of the magnetic anisotropy with film thickness, especially in the Pt-terminated film, suggests that it may be widely tuned by adjusting the film thickness. In thick films the linear voltage control coefficient is as large as 1.5 and -0.6 pJ/Vm for Pt-terminated and Mn-terminated interfaces, respectively. The combination of a widely tunable magnetic anisotropy energy and a large voltage-control coefficient suggest that MgO-capped MnPt films can serve as a versatile platform for magnetic memory and antiferromagnonic applications.

Observation Of New Particle Formation In The Northern Hemisphere At Altitude From 4 To 20 Km, Mohamed Saad

Electronic Theses and Dissertations

New particle formation (NPF) is investigated using measurements of aerosol size distributions and meteorological variables made in two continents, including USA and Europe. Despite the considerably different aerosol particle abundances among the sites, a common relationship was found between the characteristics of NPF events and the air mass convective and/or advective transport. CO and O3 act as tracers of tropospheric and stratospheric air, respectively, their statistical relationship can be used to quantify air mass characteristics and origins. The mixing ratio values of CO increased within the upper troposphere layer before/during NPF events, which may serve as an indicator of occurring …

Development Of Synthetic Coal Char Simulant For Microwave Conversion Studies: A Computationally-Driven Approach, Kevin A. Hager

Graduate Theses, Dissertations, and Problem Reports (ETD)

Recent experimental demonstration of new reaction windows for coal char/methane reactions that are less energy-intensive, provides innovation for modular reactors. However, the correlation of the exact mechanism for the enhancement of these reaction windows is not certain. This study investigates the simplification of these experimental studies by developing a well-characterized coal char simulant. The approach involves using a computational approach to screen macroscopic composition to replicate the dielectric and compositional response of actual char. This study is focused on PRB coal char. A discrete element method (DEM) technique was used to simulate the packing of coal chars to give the …